From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ezequiel Garcia Subject: Re: [PATCH 0/8] tilcdc-panel: Backlight and GPIO devicetree support Date: Fri, 25 Jul 2014 11:44:32 -0300 Message-ID: <20140725144432.GA3594@arch.cereza> References: <1405088334-11215-1-git-send-email-ezequiel@vanguardiasur.com.ar> <53D179C0.2050100@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Content-Disposition: inline In-Reply-To: <53D179C0.2050100@ti.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: dri-devel-bounces@lists.freedesktop.org Sender: "dri-devel" To: Darren Etheridge Cc: devicetree@vger.kernel.org, Russell King , daniel.vetter@ffwll.ch, dri-devel@lists.freedesktop.org List-Id: devicetree@vger.kernel.org On 24 Jul 04:25 PM, Darren Etheridge wrote: > On 07/11/2014 09:18 AM, Ezequiel Garcia wrote: > >Hello all, > > > >This patchset adds the required changes to support an optional backlight > >and GPIO for the tilcdc panel driver. > > > >There was some code to support a backlight, but it was somewhat broken > >and undocumented. I've followed the nice implementation in panel-simple > >and added a similar one here. > > > >The enable GPIO is required to turn on and off devices with such capability. > >Also here, I've followed panel-simple which looks correct. > > > >In addition to this there are very minor cosmetic cleanups and a larger > >error path fix in tilcdc's DRM driver .load error path. > > > >This patchset applies on top of drm-next branch which contains the latest > >tilcdc pushed by Guido. > > > >If at all possible, I'd like to get this merged for v3.17. If a pull request > >is needed, don't hesitate to ask and I'll prepare one. > > > >Comments and tests welcome! > > > > All of the changes seem to make sense and I tested on AM335x-EVM both with > and without the addition "backlight = " in the dts for the panel node. > > I see no issues in either case, continued to work as before. > > Tested against 3.16-rc6 with this patchset and the earlier patchset from > Guido applied. > > Also tested on BeagleBone Black even though it doesn't have a panel, just to > make sure nothing changed there. > > For the series: > Tested-by: Darren Etheridge > Thanks a lot for the test! -- Ezequiel Garcia, VanguardiaSur www.vanguardiasur.com.ar