devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mike Turquette <mturquette@linaro.org>
To: "Heiko Stübner" <heiko@sntech.de>
Cc: devicetree@vger.kernel.org, dianders@chromium.org,
	kever.yang@rock-chips.com, arm@kernel.org, cf@rock-chips.com,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 1/4] clk: rockchip: protect critical clocks from getting disabled
Date: Thu, 31 Jul 2014 17:30:25 -0700	[thread overview]
Message-ID: <20140801003025.4463.76384@quantum> (raw)
In-Reply-To: <4047366.k35vzjcKGH@diego>

Quoting Heiko Stübner (2014-07-31 16:29:34)
> Hi Mike,
> 
> Am Donnerstag, 31. Juli 2014, 15:45:23 schrieb Mike Turquette:
> > Quoting Heiko Stuebner (2014-07-29 12:12:05)
> > 
> > > The clock-tree contains clocks that should never get disabled
> > > automatically. One example are the base ACLKs, the base supplies for all
> > > peripherals.
> > > 
> > > Therefore add a structure similar to the sunxi clock-tree to protect these
> > > special clocks from being disabled.
> > > 
> > > Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> > > ---
> > > 
> > >  drivers/clk/rockchip/clk-rk3188.c |  7 +++++++
> > >  drivers/clk/rockchip/clk-rk3288.c |  7 +++++++
> > >  drivers/clk/rockchip/clk.c        | 13 +++++++++++++
> > >  drivers/clk/rockchip/clk.h        |  1 +
> > >  4 files changed, 28 insertions(+)
> > > 
> > > diff --git a/drivers/clk/rockchip/clk-rk3188.c
> > > b/drivers/clk/rockchip/clk-rk3188.c index a83a6d8..5aef277 100644
> > > --- a/drivers/clk/rockchip/clk-rk3188.c
> > > +++ b/drivers/clk/rockchip/clk-rk3188.c
> > > @@ -599,6 +599,11 @@ static struct rockchip_clk_branch
> > > rk3188_clk_branches[] __initdata = {> 
> > >         GATE(ACLK_GPS, "aclk_gps", "aclk_peri", 0, RK2928_CLKGATE_CON(8),
> > >         13, GFLAGS),>  
> > >  };
> > > 
> > > +static const char *rk3188_critical_clocks[] __initconst = {
> > > +       "aclk_cpu",
> > > +       "aclk_peri",
> > 
> > I'm not against the idea of critical clocks, but I want to verify that
> > there is no other driver out there that is a better fit for claiming
> > these clks via clk_get and enabling them the normal way via clk_enable?
> 
> In the clock hierarchy of Rockchip SoCs, both aclks listed here, are sources 
> for pclk and hclk, as well as sourcing some other peripheral gates further 
> below too. So from what I've seen from the clock diagrams, there is nothing 
> that would claim these clocks directly, and it wouldn't also make any sense to 
> let them get disabled as there will always be something using them (for 
> example the dram-controller).

Sounds good. Just out of curiosity, under what circumstances would you
want to gate them? Is there a use case for it?

Regards,
Mike

> 
> 
> Heiko

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2014-08-01  0:30 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-07-29 19:12 [PATCH 0/4] ARM: rockchip: add dma support Heiko Stuebner
     [not found] ` <1406661128-7614-1-git-send-email-heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
2014-07-29 19:12   ` [PATCH 1/4] clk: rockchip: protect critical clocks from getting disabled Heiko Stuebner
     [not found]     ` <1406661128-7614-2-git-send-email-heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
2014-07-31 22:45       ` Mike Turquette
2014-07-31 23:29         ` Heiko Stübner
2014-08-01  0:30           ` Mike Turquette [this message]
2014-08-01  8:15             ` Heiko Stübner
2014-08-08 21:58               ` Doug Anderson
     [not found]                 ` <CAD=FV=XA31T9i6nLaDhVS+BkJ=U-PiMye_ouC1QY8EMoKqMCiQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-08-08 22:20                   ` Heiko Stübner
2014-08-11 10:03                     ` Kever Yang
     [not found]                       ` <53E894F5.4060205-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2014-08-11 10:22                         ` Heiko Stübner
2014-08-12  0:59       ` Kever Yang
2014-07-29 19:12   ` [PATCH 2/4] ARM: rockchip: enable the AMBA bus Heiko Stuebner
     [not found]     ` <1406661128-7614-3-git-send-email-heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
2014-08-11  3:35       ` Kever Yang
     [not found]         ` <53E839F3.7040208-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2014-08-11  7:50           ` Heiko Stübner
2014-08-11 16:19       ` Doug Anderson
2014-08-12  1:00       ` Kever Yang
2014-07-29 19:12   ` [PATCH 3/4] ARM: dts: rockchip: add rk3288 dma controllers Heiko Stuebner
     [not found]     ` <1406661128-7614-4-git-send-email-heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
2014-08-11 17:01       ` Doug Anderson
2014-08-11 18:01         ` Heiko Stübner
2014-08-11 18:37           ` Andreas Färber
     [not found]             ` <53E90D69.6000307-l3A5Bk7waGM@public.gmane.org>
2014-08-11 19:15               ` Heiko Stübner
2014-08-12  1:01       ` Kever Yang
2014-07-29 19:12   ` [PATCH 4/4] ARM: dts: rockchip: add rk3188 " Heiko Stuebner
     [not found]     ` <1406661128-7614-5-git-send-email-heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
2014-07-29 19:55       ` Sergei Shtylyov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140801003025.4463.76384@quantum \
    --to=mturquette@linaro.org \
    --cc=arm@kernel.org \
    --cc=cf@rock-chips.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dianders@chromium.org \
    --cc=heiko@sntech.de \
    --cc=kever.yang@rock-chips.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).