From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tony Lindgren Subject: Re: [PATCH] ARM: dts: DRA7: fix interrupt-cells for GPIO Date: Fri, 22 Aug 2014 16:02:54 -0700 Message-ID: <20140822230253.GJ10066@atomide.com> References: <1406748032-19417-1-git-send-email-nm@ti.com> <53F249F3.9070402@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <53F249F3.9070402-l0cyMroinI0@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Nishanth Menon Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, inux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: devicetree@vger.kernel.org * Nishanth Menon [140818 11:49]: > On 07/30/2014 02:20 PM, Nishanth Menon wrote: > > GPIO modules are also interrupt sources. However, they require both the > > GPIO number and IRQ type to function properly. > > > > By declaring that GPIO uses interrupt-cells=<1>, we essentially do not > > allow users of the nodes to use the interrupt property appropritely. > > > > With this change, the following now works: > > > > interrupt-parent = <&gpio6>; > > interrupts = <5 IRQ_TYPE_LEVEL_LOW>; > > > > Fixes: 6e58b8f1daaf ('ARM: dts: DRA7: Add the dts files for dra7 SoC and dra7-evm board') > > Signed-off-by: Nishanth Menon > > --- > > Based on v3.16-rc7 > > > > arch/arm/boot/dts/dra7.dtsi | 16 ++++++++-------- > > 1 file changed, 8 insertions(+), 8 deletions(-) > > Tony, > Gentle ping. we still have this issue on 3.17-rc1. any suggestions on > if we can pick this up during RC? Yes thanks applying into omap-for-v3.17/fixes. Tony -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html