[PATCH v6 1/5] dt-bindings: Add RK808 device tree bindings document

[PATCH v6 1/5] dt-bindings: Add RK808 device tree bindings document

[Chris Zhong]

Add device tree bindings documentation and a header file
for rockchip's RK808 pmic.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Zhang Qing <zhangqing@rock-chips.com>

---

Changes in v6:
Advices by Mark Rutland
- add description about clock-cells
Advices by Doug
- modify description about regulator
- remove pinctrl description

Changes in v5:
Advices by Mark Brown
- add description about regulator valid name.
- add a header file "rockchip,rk808".

Changes in v4:
Advices by Doug
- add a "#clock-cells" propertiy
- update the example

Changes in v3: None
Changes in v2: None

 Documentation/devicetree/bindings/mfd/rk808.txt |  150 +++++++++++++++++++++++
 include/dt-bindings/clock/rockchip,rk808.h      |   11 ++
 2 files changed, 161 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/rk808.txt
 create mode 100644 include/dt-bindings/clock/rockchip,rk808.h

diff --git a/Documentation/devicetree/bindings/mfd/rk808.txt b/Documentation/devicetree/bindings/mfd/rk808.txt
new file mode 100644
index 0000000..6c39360
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rk808.txt
@@ -0,0 +1,150 @@
+RK808 Power Management Integrated Circuit
+
+Required properties:
+- compatible: "rockchip,rk808"
+- reg: I2C slave address
+- interrupt-parent: The parent interrupt controller.
+- interrupts: the interrupt outputs of the controller.
+- #clock-cells: RK808 has 2 clkout, they are always 32khz,
+  the value should be 1
+
+Optional properties:
+- clock-output-names: From common clock binding to override the
+  default output clock name
+- rockchip,system-power-controller: Telling whether or not this pmic is controlling
+  the system power.
+
+Regulators: All the regulators of RK808 to be instantiated shall be
+listed in a child node named 'regulators'. Each regulator is represented
+by a child node of the 'regulators' node.
+
+	regulator-name {
+		/* standard regulator bindings here */
+	};
+
+Following regulators of the RK808 PMIC block are supported. Note that
+the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO
+number as described in RK808 datasheet.
+
+	- DCDC_REGn
+		- valid values for n are 1 to 4.
+	- LDO_REGn
+		- valid values for n are 1 to 8.
+	- SWITCH_REGn
+		- valid values for n are 1 to 2
+
+Standard regulator bindings are used inside regulator subnodes. Check
+  Documentation/devicetree/bindings/regulator/regulator.txt
+for more details
+
+Example:
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		interrupt-parent = <&gpio0>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+		reg = <0x1b>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k0", "xin32k1";
+		rockchip,system-power-controller;
+
+		regulators {
+			rk808_dcdc1_reg: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vdd_arm";
+			};
+
+			rk808_dcdc2_reg: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-name = "vdd_gpu";
+			};
+
+			rk808_dcdc3_reg: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vdd_ddr";
+			};
+
+			rk808_dcdc4_reg: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio";
+			};
+
+			rk808_ldo1_reg: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			rk808_ldo2_reg: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			rk808_ldo3_reg: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "LDO_REG3";
+			};
+
+			rk808_ldo4_reg: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			rk808_ldo5_reg: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			rk808_ldo6_reg: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+			};
+
+			rk808_ldo7_reg: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			rk808_ldo8_reg: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			rk808_switch1_reg: SWITCH_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			rk808_switch2_reg: SWITCH_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
diff --git a/include/dt-bindings/clock/rockchip,rk808.h b/include/dt-bindings/clock/rockchip,rk808.h
new file mode 100644
index 0000000..1a87343
--- /dev/null
+++ b/include/dt-bindings/clock/rockchip,rk808.h
@@ -0,0 +1,11 @@
+/*
+ * This header provides constants clk index RK808 pmic clkout
+ */
+#ifndef _CLK_ROCKCHIP_RK808
+#define _CLK_ROCKCHIP_RK808
+
+/* CLOCKOUT index */
+#define RK808_CLKOUT0		0
+#define RK808_CLKOUT1		1
+
+#endif
-- 
1.7.9.5

Re: [PATCH v6 1/5] dt-bindings: Add RK808 device tree bindings document

[Doug Anderson]

Chris,

On Tue, Aug 26, 2014 at 7:11 AM, Chris Zhong <zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org> wrote:
> Add device tree bindings documentation and a header file
> for rockchip's RK808 pmic.
>
> Signed-off-by: Chris Zhong <zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
> Signed-off-by: Zhang Qing <zhangqing-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
>
> ---
>
> Changes in v6:
> Advices by Mark Rutland
> - add description about clock-cells
> Advices by Doug
> - modify description about regulator
> - remove pinctrl description
>
> Changes in v5:
> Advices by Mark Brown
> - add description about regulator valid name.
> - add a header file "rockchip,rk808".
>
> Changes in v4:
> Advices by Doug
> - add a "#clock-cells" propertiy
> - update the example
>
> Changes in v3: None
> Changes in v2: None
>
>  Documentation/devicetree/bindings/mfd/rk808.txt |  150 +++++++++++++++++++++++
>  include/dt-bindings/clock/rockchip,rk808.h      |   11 ++
>  2 files changed, 161 insertions(+)


Is it worth picking a new example from
<https://patchwork.kernel.org/patch/4783471/>?  Then if someone
happens to copy your example the'll get slightly more sane things
(level low for interrupt, wakeup-source, proper "clock-output-name"
that's compatible with rk3288, etc.

Other than that this looks find to me:

Reviewed-by: Doug Anderson <dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v6 1/5] dt-bindings: Add RK808 device tree bindings document

[Mark Rutland]

Hi,

On Tue, Aug 26, 2014 at 03:11:28PM +0100, Chris Zhong wrote:
> Add device tree bindings documentation and a header file
> for rockchip's RK808 pmic.
> 
> Signed-off-by: Chris Zhong <zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
> Signed-off-by: Zhang Qing <zhangqing-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
> 
> ---
> 
> Changes in v6:
> Advices by Mark Rutland
> - add description about clock-cells
> Advices by Doug
> - modify description about regulator
> - remove pinctrl description
> 
> Changes in v5:
> Advices by Mark Brown
> - add description about regulator valid name.
> - add a header file "rockchip,rk808".
> 
> Changes in v4:
> Advices by Doug
> - add a "#clock-cells" propertiy
> - update the example
> 
> Changes in v3: None
> Changes in v2: None
> 
>  Documentation/devicetree/bindings/mfd/rk808.txt |  150 +++++++++++++++++++++++
>  include/dt-bindings/clock/rockchip,rk808.h      |   11 ++
>  2 files changed, 161 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/rk808.txt
>  create mode 100644 include/dt-bindings/clock/rockchip,rk808.h
> 
> diff --git a/Documentation/devicetree/bindings/mfd/rk808.txt b/Documentation/devicetree/bindings/mfd/rk808.txt
> new file mode 100644
> index 0000000..6c39360
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/rk808.txt
> @@ -0,0 +1,150 @@
> +RK808 Power Management Integrated Circuit
> +
> +Required properties:
> +- compatible: "rockchip,rk808"
> +- reg: I2C slave address
> +- interrupt-parent: The parent interrupt controller.
> +- interrupts: the interrupt outputs of the controller.
> +- #clock-cells: RK808 has 2 clkout, they are always 32khz,
> +  the value should be 1

When I mentioned the describing the value values before, I meant the
values that the cell in the specifier can take, 0 and 1, possibly
described as mnemnoics with reference to the binding header file.

Apologies if that was unclear.

Thanks,
Mark.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html