From mboxrd@z Thu Jan 1 00:00:00 1970 From: Greg Kroah-Hartman Subject: Re: [PATCH v2 6/9] usb: xhci: Add NVIDIA Tegra xHCI host-controller driver Date: Sat, 30 Aug 2014 14:15:58 -0700 Message-ID: <20140830211558.GA13814@kroah.com> References: <1408381705-3623-1-git-send-email-abrestic@chromium.org> <1408381705-3623-7-git-send-email-abrestic@chromium.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <1408381705-3623-7-git-send-email-abrestic@chromium.org> Sender: linux-kernel-owner@vger.kernel.org To: Andrew Bresticker Cc: Stephen Warren , Thierry Reding , linux-tegra@vger.kernel.org, Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Russell King , Jassi Brar , Linus Walleij , Mathias Nyman , Grant Likely , Alan Stern , Arnd Bergmann , Kishon Vijay Abraham I , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-usb@vger.kernel.org List-Id: devicetree@vger.kernel.org On Mon, Aug 18, 2014 at 10:08:22AM -0700, Andrew Bresticker wrote: > Add support for the on-chip xHCI host controller present on Tegra SoCs. > > The driver is currently very basic: it loads the controller with its > firmware, starts the controller, and is able to service messages sent > by the controller's firmware. The hardware supports device mode as > well as lower-power operating modes, but support for these is not yet > implemented here. So you are saying the device doesn't really work? Can it handle USB transactions properly? I have a jetson board here, is this the controller for that hardware? Can I test this series on that platform, or is it for something else? > +static const struct tegra_xhci_soc_config tegra124_soc_config = { > + .firmware_file = "nvidia/tegra124/xusb.bin", > +}; > +MODULE_FIRMWARE("nvidia/tegra124/xusb.bin"); Has this file been submitted to the linux-firmware tree? thanks, greg k-h