From: Nishanth Menon <nm@ti.com>
To: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org, rogerq@ti.com,
Lokesh Vutla <lokeshvutla@ti.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/2] ARM: dts: dra7-evm: Fix spi1 mux documentation
Date: Thu, 4 Sep 2014 08:33:37 -0500 [thread overview]
Message-ID: <20140904133337.GA4215@kahuna> (raw)
In-Reply-To: <1409837008-32144-2-git-send-email-nm@ti.com>
On 08:23-20140904, Nishanth Menon wrote:
> While auditing the various pin ctrl configurations using the following
> command:
> grep PIN_ arch/arm/boot/dts/dra7-evm.dts|(while read line;
> do
> v=`echo "$line" | sed -e "s/\s\s*/|/g" | cut -d '|' -f1 |
> cut -d 'x' -f2|tr [a-z] [A-Z]`;
> HEX=`echo "obase=16;ibase=16;4A003400+$v"| bc`;
> echo "$HEX ===> $line";
> done)
> against DRA75x/74x NDA TRM revision S(SPRUHI2S August 2014),
> documentation errors were found for spi1 pinctrl. Fix the same.
>
> Fixes: 6e58b8f1daaf1af340fb9309907e5ffa473c7aff ("ARM: dts: DRA7: Add
> the dts files for dra7 SoC and dra7-evm board")
^^^ uggh... apologies.. checkpatch slipped this one.. updated rev below
(wont repost unless requested), Apologies on the spam..
----8<----
>From db595b941663f634f5f5106cf0092c7c8e998bb4 Mon Sep 17 00:00:00 2001
From: Nishanth Menon <nm@ti.com>
Date: Thu, 4 Sep 2014 08:06:27 -0500
Subject: [PATCH V2 1/2] ARM: dts: dra7-evm: Fix spi1 mux documentation
While auditing the various pin ctrl configurations using the following
command:
grep PIN_ arch/arm/boot/dts/dra7-evm.dts|(while read line;
do
v=`echo "$line" | sed -e "s/\s\s*/|/g" | cut -d '|' -f1 |
cut -d 'x' -f2|tr [a-z] [A-Z]`;
HEX=`echo "obase=16;ibase=16;4A003400+$v"| bc`;
echo "$HEX ===> $line";
done)
against DRA75x/74x NDA TRM revision S(SPRUHI2S August 2014),
documentation errors were found for spi1 pinctrl. Fix the same.
Fixes: 6e58b8f1daaf1af ("ARM: dts: DRA7: Add the dts files for dra7 SoC and dra7-evm board")
Signed-off-by: Nishanth Menon <nm@ti.com>
---
arch/arm/boot/dts/dra7-evm.dts | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index 50f8022..e120fca 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -50,13 +50,13 @@
mcspi1_pins: pinmux_mcspi1_pins {
pinctrl-single,pins = <
- 0x3a4 (PIN_INPUT | MUX_MODE0) /* spi2_clk */
- 0x3a8 (PIN_INPUT | MUX_MODE0) /* spi2_d1 */
- 0x3ac (PIN_INPUT | MUX_MODE0) /* spi2_d0 */
- 0x3b0 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */
- 0x3b4 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs1 */
- 0x3b8 (PIN_INPUT_SLEW | MUX_MODE6) /* spi2_cs2 */
- 0x3bc (PIN_INPUT_SLEW | MUX_MODE6) /* spi2_cs3 */
+ 0x3a4 (PIN_INPUT | MUX_MODE0) /* spi1_sclk */
+ 0x3a8 (PIN_INPUT | MUX_MODE0) /* spi1_d1 */
+ 0x3ac (PIN_INPUT | MUX_MODE0) /* spi1_d0 */
+ 0x3b0 (PIN_INPUT_SLEW | MUX_MODE0) /* spi1_cs0 */
+ 0x3b4 (PIN_INPUT_SLEW | MUX_MODE0) /* spi1_cs1 */
+ 0x3b8 (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs2.hdmi1_hpd */
+ 0x3bc (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs3.hdmi1_cec */
>;
};
--
1.7.9.5
--
Regards,
Nishanth Menon
next prev parent reply other threads:[~2014-09-04 13:33 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-04 13:23 [PATCH 0/2] ARM: dts: dra7-evm: fixes for mux and VTT control Nishanth Menon
2014-09-04 13:23 ` [PATCH 1/2] ARM: dts: dra7-evm: Fix spi1 mux documentation Nishanth Menon
2014-09-04 13:33 ` Nishanth Menon [this message]
2014-09-04 13:23 ` [PATCH 2/2] ARM: dts: dra7-evm: Add vtt regulator support Nishanth Menon
[not found] ` <1409837008-32144-1-git-send-email-nm-l0cyMroinI0@public.gmane.org>
2014-09-04 19:49 ` [PATCH 0/2] ARM: dts: dra7-evm: fixes for mux and VTT control Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140904133337.GA4215@kahuna \
--to=nm@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=lokeshvutla@ti.com \
--cc=rogerq@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).