From: Tony Lindgren <tony@atomide.com>
To: Nishanth Menon <nm@ti.com>
Cc: "Tero Kristo" <t-kristo@ti.com>, "Paul Walmsley" <paul@pwsan.com>,
"Benoît Cousson" <bcousson@baylibre.com>,
"Kevin Hilman" <khilman@deeprootsystems.com>,
linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org,
linux-kernel@vger.kernel.org, Keerthy <j-keerthy@ti.com>,
"Santosh Shilimkar" <santosh.shilimkar@ti.com>,
devicetree@vger.kernel.org
Subject: Re: [PATCH 1/6] ARM: dts: OMAP3+: Add PRM interrupt
Date: Mon, 8 Sep 2014 17:58:09 -0700 [thread overview]
Message-ID: <20140909005808.GG10785@atomide.com> (raw)
In-Reply-To: <1408716235-26164-2-git-send-email-nm@ti.com>
* Nishanth Menon <nm@ti.com> [140822 07:08]:
> Provide OMAP3, 4 and OMAP5 with interrupt number for PRM
>
> And for DRA7, provide crossbar number for prm interrupt.
>
> Signed-off-by: Nishanth Menon <nm@ti.com>
I've picked this patch only into omap-for-v3.18/soc as
this is needed for Felipe's intc related changes to work
properly with the wake-up interrupts for DT based booting
for off-idle.
So please don't include this patch into your pull request
for the other dts changes you have.
Regards,
Tony
> ---
> arch/arm/boot/dts/dra7.dtsi | 1 +
> arch/arm/boot/dts/omap3.dtsi | 1 +
> arch/arm/boot/dts/omap4.dtsi | 1 +
> arch/arm/boot/dts/omap5.dtsi | 1 +
> 4 files changed, 4 insertions(+)
>
> diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
> index 97f603c..7a3e011 100644
> --- a/arch/arm/boot/dts/dra7.dtsi
> +++ b/arch/arm/boot/dts/dra7.dtsi
> @@ -89,6 +89,7 @@
> prm: prm@4ae06000 {
> compatible = "ti,dra7-prm";
> reg = <0x4ae06000 0x3000>;
> + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
>
> prm_clocks: clocks {
> #address-cells = <1>;
> diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
> index 575a49b..3136ed1 100644
> --- a/arch/arm/boot/dts/omap3.dtsi
> +++ b/arch/arm/boot/dts/omap3.dtsi
> @@ -97,6 +97,7 @@
> prm: prm@48306000 {
> compatible = "ti,omap3-prm";
> reg = <0x48306000 0x4000>;
> + interrupts = <11>;
>
> prm_clocks: clocks {
> #address-cells = <1>;
> diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
> index 69408b5..7375d44 100644
> --- a/arch/arm/boot/dts/omap4.dtsi
> +++ b/arch/arm/boot/dts/omap4.dtsi
> @@ -129,6 +129,7 @@
> prm: prm@4a306000 {
> compatible = "ti,omap4-prm";
> reg = <0x4a306000 0x3000>;
> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
>
> prm_clocks: clocks {
> #address-cells = <1>;
> diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
> index fc8df17..df0a09b 100644
> --- a/arch/arm/boot/dts/omap5.dtsi
> +++ b/arch/arm/boot/dts/omap5.dtsi
> @@ -131,6 +131,7 @@
> prm: prm@4ae06000 {
> compatible = "ti,omap5-prm";
> reg = <0x4ae06000 0x3000>;
> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
>
> prm_clocks: clocks {
> #address-cells = <1>;
> --
> 1.7.9.5
>
next prev parent reply other threads:[~2014-09-09 0:58 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-22 14:03 [PATCH 0/6] ARM: dts: OMAP5+: Fixes for pinctrl support Nishanth Menon
2014-08-22 14:03 ` [PATCH 1/6] ARM: dts: OMAP3+: Add PRM interrupt Nishanth Menon
2014-09-09 0:58 ` Tony Lindgren [this message]
[not found] ` <1408716235-26164-1-git-send-email-nm-l0cyMroinI0@public.gmane.org>
2014-08-22 14:03 ` [PATCH 2/6] ARM: dts: OMAP5: switch to compatible pinctrl Nishanth Menon
2014-08-22 14:03 ` [PATCH 3/6] ARM: dts: DRA7: " Nishanth Menon
2014-08-22 14:03 ` [PATCH 4/6] ARM: dts: AM437x: " Nishanth Menon
2014-08-22 14:03 ` [PATCH 5/6] ARM: dts: OMAP5/DRA7: switch over to interrupts-extended property for UART Nishanth Menon
2014-08-22 14:03 ` [PATCH 6/6] ARM: dts: dra7-evm: Mark uart1 rxd as wakeup capable Nishanth Menon
[not found] ` <1408716235-26164-7-git-send-email-nm-l0cyMroinI0@public.gmane.org>
2014-09-08 18:47 ` Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140909005808.GG10785@atomide.com \
--to=tony@atomide.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=j-keerthy@ti.com \
--cc=khilman@deeprootsystems.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=nm@ti.com \
--cc=paul@pwsan.com \
--cc=santosh.shilimkar@ti.com \
--cc=t-kristo@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).