From mboxrd@z Thu Jan  1 00:00:00 1970
From: Peter Chen <peter.chen@freescale.com>
Subject: Re: [PATCH v4 08/12] Documentation: bindings: add doc for the USB2
 ChipIdea USB driver
Date: Thu, 11 Sep 2014 09:09:25 +0800
Message-ID: <20140911010924.GF3609@peterchendt>
References: <1409730511-16101-1-git-send-email-antoine.tenart@free-electrons.com>
 <1409730511-16101-9-git-send-email-antoine.tenart@free-electrons.com>
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Return-path: <linux-kernel-owner@vger.kernel.org>
Content-Disposition: inline
In-Reply-To: <1409730511-16101-9-git-send-email-antoine.tenart@free-electrons.com>
Sender: linux-kernel-owner@vger.kernel.org
To: Antoine Tenart <antoine.tenart@free-electrons.com>
Cc: sebastian.hesselbarth@gmail.com, balbi@ti.com, p.zabel@pengutronix.de, alexandre.belloni@free-electrons.com, thomas.petazzoni@free-electrons.com, zmxu@marvell.com, jszhang@marvell.com, linux-arm-kernel@lists.infradead.org, linux-usb@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
List-Id: devicetree@vger.kernel.org

On Wed, Sep 03, 2014 at 09:48:27AM +0200, Antoine Tenart wrote:
> Document the USB2 ChipIdea driver (ci13xxx) bindings.
> 
> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
> ---
>  .../devicetree/bindings/usb/ci-hdrc-usb2.txt       | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
> 
> diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
> new file mode 100644
> index 000000000000..8dd6d8285dab
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
> @@ -0,0 +1,22 @@
> +* USB2 ChipIdea USB controller for ci13xxx
> +
> +Required properties:
> +- compatible: should be "chipidea,usb2"
> +- reg: base address and length of the registers
> +- interrupts: interrupt for the USB controller
> +
> +Optional properties:
> +- clocks: reference to the USB clock
> +- phys: reference to the USB PHY
> +- vbus-supply: reference to the VBUS regulator
> +
> +Example:
> +
> +	usb@f7ed0000 {
> +		compatible = "chipidea,usb2";
> +		reg = <0xf7ed0000 0x10000>;
> +		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&chip CLKID_USB0>;
> +		phys = <&usb_phy0>;
> +		vbus-supply = <&reg_usb0_vbus>;
> +	};
> -- 
> 1.9.1
> 

This one is ok for me.

-- 
Best Regards,
Peter Chen