From: Markus Pargmann <mpa-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
To: Nicolin Chen <nicoleotsuka-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Dmitry Lavnikevich
<d.lavnikevich-H6HfJ9slvY0Aspv4Qr0y0gC/G2K4zDHf@public.gmane.org>,
"robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org"
<robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
"mark.rutland-5wv7dgnIgG8@public.gmane.org"
<mark.rutland-5wv7dgnIgG8@public.gmane.org>,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org,
Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
shawn.guo-KZfg59tc24xl57MIdRCFDg@public.gmane.org,
kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org,
"perex-/Fr2/VpizcU@public.gmane.org"
<perex-/Fr2/VpizcU@public.gmane.org>,
Takashi Iwai <tiwai-l3A5Bk7waGM@public.gmane.org>,
Timur Tabi <timur-N01EOCouUvQ@public.gmane.org>,
Xiubo Li <Li.Xiubo-KZfg59tc24xl57MIdRCFDg@public.gmane.org>,
grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
"devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
"alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org"
<alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org>,
"linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: Re: [alsa-devel] [PATCH 2/5] ASoC: fsl: add imx-tlv320aic3x machine driver
Date: Thu, 11 Sep 2014 08:40:16 +0200 [thread overview]
Message-ID: <20140911064016.GE16489@pengutronix.de> (raw)
In-Reply-To: <CAGoOwPSpkNy6uNVAjG2HgiHHscKZjL5wgVrkyGwWCmyU7x+gWg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
[-- Attachment #1: Type: text/plain, Size: 1865 bytes --]
On Wed, Sep 10, 2014 at 11:14:15AM -0700, Nicolin Chen wrote:
> On Wed, Sep 10, 2014 at 7:27 AM, Markus Pargmann <mpa-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org> wrote:
> > Hi,
> >
> > On Wed, Sep 10, 2014 at 04:46:46PM +0300, Dmitry Lavnikevich wrote:
> >> This is driver for i.MX6 boards with tlv320aic3x audio codecs.
> >>
> >> Signed-off-by: Dmitry Lavnikevich <d.lavnikevich-H6HfJ9slvY0Aspv4Qr0y0gC/G2K4zDHf@public.gmane.org>
> >> ---
> >> .../bindings/sound/fsl,imx-audio-tlv320aic3x.txt | 27 ++++
> >> sound/soc/fsl/Kconfig | 13 ++
> >> sound/soc/fsl/Makefile | 2 +
> >> sound/soc/fsl/imx-tlv320aic3x.c | 177 +++++++++++++++++++++
> >> 4 files changed, 219 insertions(+)
> >> create mode 100644 Documentation/devicetree/bindings/sound/fsl,imx-audio-tlv320aic3x.txt
> >> create mode 100644 sound/soc/fsl/imx-tlv320aic3x.c
> >
> > Is it possible to use the simple-card
> > (Documentation/devicetree/bindings/sound/simple-card.txt) instead of
> > adding a new audio card driver? There are also DT bindings for the imx
> > audiomultiplexer (imx-audmux.txt).
>
> I don't know why my mutt doesn't display this mail.
>
> Anyway, if Simple Card supports audmux, yes, it's also a good idea.
Simple Card doesn't support it. But there are DT bindings for the audmux
device node which allow the definition of a default multiplexer setup.
That configuration is applied in the probe() function of the audmux driver.
Best regards,
Markus
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
next prev parent reply other threads:[~2014-09-11 6:40 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-10 13:46 [PATCH 0/5] Add Phytec pbab01 audio support Dmitry Lavnikevich
2014-09-10 13:46 ` [PATCH 1/5] ARM: dts: pbab01: move i2c pins and frequency configuration into pfla02 Dmitry Lavnikevich
[not found] ` <1410356809-26179-2-git-send-email-d.lavnikevich-H6HfJ9slvY0Aspv4Qr0y0gC/G2K4zDHf@public.gmane.org>
2014-09-11 8:47 ` Philipp Zabel
[not found] ` <1410425238.4011.18.camel-+qGW7pzALmz7o/J7KWpOmN53zsg1cpMQ@public.gmane.org>
2014-09-12 15:55 ` Dmitry Lavnikevich
2014-09-10 13:46 ` [PATCH 2/5] ASoC: fsl: add imx-tlv320aic3x machine driver Dmitry Lavnikevich
2014-09-10 14:19 ` Lothar Waßmann
2014-09-10 14:27 ` Markus Pargmann
2014-09-10 18:14 ` [alsa-devel] " Nicolin Chen
[not found] ` <CAGoOwPSpkNy6uNVAjG2HgiHHscKZjL5wgVrkyGwWCmyU7x+gWg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-09-11 6:40 ` Markus Pargmann [this message]
2014-09-11 12:41 ` Dmitry Lavnikevich
[not found] ` <1410356809-26179-3-git-send-email-d.lavnikevich-H6HfJ9slvY0Aspv4Qr0y0gC/G2K4zDHf@public.gmane.org>
2014-09-10 18:07 ` Nicolin Chen
2014-09-10 13:46 ` [PATCH 3/5] ARM: imx_v6_v7_defconfig: enable imx-tlv320aic3x by default Dmitry Lavnikevich
2014-09-10 13:46 ` [PATCH 4/5] ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards Dmitry Lavnikevich
2014-09-10 13:46 ` [PATCH 5/5] ASoC: tlv320aic3x: fix PLL D configuration Dmitry Lavnikevich
2014-09-12 16:04 ` [PATCH v2 0/5] Add Phytec pbab01 audio support Dmitry Lavnikevich
2014-09-12 16:04 ` [PATCH v2 1/4] ARM: dts: pbab01: move i2c pins and frequency configuration into pfla02 Dmitry Lavnikevich
2014-09-12 16:04 ` [PATCH v2 2/4] ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards Dmitry Lavnikevich
2014-09-12 16:14 ` Alexander Shiyan
2014-09-15 12:04 ` Dmitry Lavnikevich
2014-09-12 16:26 ` Alexander Shiyan
2014-09-12 16:40 ` [alsa-devel] " Fabio Estevam
2014-09-15 12:07 ` Dmitry Lavnikevich
2014-09-16 1:46 ` Shawn Guo
2014-09-12 16:04 ` [PATCH v2 3/4] ARM: imx_v6_v7_defconfig: enable tlv320aic3x and simple-audio-card by default Dmitry Lavnikevich
2014-09-12 16:04 ` [PATCH v2 4/4] ASoC: tlv320aic3x: fix PLL D configuration Dmitry Lavnikevich
2014-09-16 8:08 ` [PATCH v3 0/4] Add Phytec pbab01 audio support Dmitry Lavnikevich
2014-09-16 8:08 ` [PATCH v3 1/4] ARM: dts: pbab01: move i2c pins and frequency configuration into pfla02 Dmitry Lavnikevich
2014-09-16 8:08 ` [PATCH v3 2/4] ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards Dmitry Lavnikevich
2014-10-01 12:11 ` Fabio Estevam
[not found] ` <CAOMZO5CgrQ6Wf6kStga40TUKx9dARygCNB4OYSUoG3c8eUYbrA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-10-01 13:40 ` Dmitry Lavnikevich
[not found] ` <542C0441.5080508-H6HfJ9slvY0Aspv4Qr0y0gC/G2K4zDHf@public.gmane.org>
2014-10-01 13:45 ` Fabio Estevam
2014-10-01 13:52 ` Dmitry Lavnikevich
2014-09-16 8:08 ` [PATCH v3 3/4] ARM: imx_v6_v7_defconfig: enable tlv320aic3x audio codec by default Dmitry Lavnikevich
2014-09-16 8:09 ` [PATCH v3 4/4] ASoC: tlv320aic3x: fix PLL D configuration Dmitry Lavnikevich
2014-10-03 13:18 ` [PATCH v4 0/4] Add Phytec pbab01 audio support Dmitry Lavnikevich
2014-10-03 13:18 ` [PATCH v4 1/4] ARM: dts: pbab01: move i2c pins and frequency configuration into pfla02 Dmitry Lavnikevich
[not found] ` <1412342336-25700-1-git-send-email-d.lavnikevich-H6HfJ9slvY0Aspv4Qr0y0gC/G2K4zDHf@public.gmane.org>
2014-10-03 13:18 ` [PATCH v4 2/4] ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards Dmitry Lavnikevich
2014-10-03 13:18 ` [PATCH v4 3/4] ARM: imx_v6_v7_defconfig: enable tlv320aic3x audio codec by default Dmitry Lavnikevich
2014-10-03 13:18 ` [PATCH v4 4/4] ASoC: tlv320aic3x: fix PLL D configuration Dmitry Lavnikevich
[not found] ` <1412342336-25700-5-git-send-email-d.lavnikevich-H6HfJ9slvY0Aspv4Qr0y0gC/G2K4zDHf@public.gmane.org>
2014-10-03 15:08 ` Mark Brown
2014-10-22 9:08 ` [PATCH v4 0/3 RESEND] Add Phytec pbab01 audio support Dmitry Lavnikevich
2014-10-22 9:11 ` [PATCH v4 RESEND 3/3] ARM: imx_v6_v7_defconfig: enable tlv320aic3x audio codec by default Dmitry Lavnikevich
[not found] ` <1413968914-13689-1-git-send-email-d.lavnikevich-H6HfJ9slvY0Aspv4Qr0y0gC/G2K4zDHf@public.gmane.org>
2014-10-22 9:08 ` [PATCH v4 RESEND 1/3] ARM: dts: pbab01: move i2c pins and frequency configuration into pfla02 Dmitry Lavnikevich
2014-10-22 9:12 ` [PATCH v4 RESEND 2/3] ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards Dmitry Lavnikevich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140911064016.GE16489@pengutronix.de \
--to=mpa-bicnvbalz9megne8c9+irq@public.gmane.org \
--cc=Li.Xiubo-KZfg59tc24xl57MIdRCFDg@public.gmane.org \
--cc=alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org \
--cc=d.lavnikevich-H6HfJ9slvY0Aspv4Qr0y0gC/G2K4zDHf@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=nicoleotsuka-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=perex-/Fr2/VpizcU@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=shawn.guo-KZfg59tc24xl57MIdRCFDg@public.gmane.org \
--cc=timur-N01EOCouUvQ@public.gmane.org \
--cc=tiwai-l3A5Bk7waGM@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).