[PATCH 0/5] regulator: add support for syr82x to fan53555

[PATCH 0/5] regulator: add support for syr82x to fan53555

[Heiko Stuebner]

Silergy SYR827 and SYR828 regulators use the completely same i2c interface
as the fan53555 regulators - only with different voltage ranges.
They are used in a some Rockchip rk3288 board designs around an act8846.

Therefore first add devicetree support for the fan53555 in general and
then support for the Silgery variants.

Tested on a rk3288 based Netxeon R89 board as cpu voltage regulator.


Heiko Stuebner (5):
  regulator: fan53555: enable vin supply
  regulator: fan53555: set regulator name from constraints name
  dt-bindings: add devicetree bindings for Fairchild FAN53555 regulators
  regulator: fan53555: add devicetree support
  regulator: fan53555: add support for Silergy SYR82x regulators

 .../devicetree/bindings/regulator/fan53555.txt     |  25 ++++
 .../devicetree/bindings/vendor-prefixes.txt        |   2 +
 drivers/regulator/fan53555.c                       | 161 +++++++++++++++++++--
 3 files changed, 174 insertions(+), 14 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/regulator/fan53555.txt

-- 
2.0.1

[PATCH 1/5] regulator: fan53555: enable vin supply

[Heiko Stuebner]

The regulator can be supplied by a parent regulator through its vin pin,
so add the supply_name for it.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 drivers/regulator/fan53555.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c
index 714fd9a..c912ba7 100644
--- a/drivers/regulator/fan53555.c
+++ b/drivers/regulator/fan53555.c
@@ -207,6 +207,7 @@ static int fan53555_regulator_register(struct fan53555_device_info *di,
 	struct regulator_desc *rdesc = &di->desc;
 
 	rdesc->name = "fan53555-reg";
+	rdesc->supply_name = "vin";
 	rdesc->ops = &fan53555_regulator_ops;
 	rdesc->type = REGULATOR_VOLTAGE;
 	rdesc->n_voltages = FAN53555_NVOLTAGES;
-- 
2.0.1

Re: [PATCH 1/5] regulator: fan53555: enable vin supply

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 190 bytes --]

On Sun, Sep 14, 2014 at 09:23:01PM +0200, Heiko Stuebner wrote:
> The regulator can be supplied by a parent regulator through its vin pin,
> so add the supply_name for it.

Applied, thanks.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 473 bytes --]

[PATCH 2/5] regulator: fan53555: set regulator name from constraints name

[Heiko Stuebner]

There is a high potential of more than one of those regulators existing
on a board, so name the regulator according to the name provided in the
initdata instead of statically.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 drivers/regulator/fan53555.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c
index c912ba7..d143790 100644
--- a/drivers/regulator/fan53555.c
+++ b/drivers/regulator/fan53555.c
@@ -206,7 +206,12 @@ static int fan53555_regulator_register(struct fan53555_device_info *di,
 {
 	struct regulator_desc *rdesc = &di->desc;
 
-	rdesc->name = "fan53555-reg";
+	rdesc->name = devm_kstrdup(di->dev,
+				   di->regulator->constraints.name,
+				   GFP_KERNEL);
+	if (!rdesc->name)
+		return -ENOMEM;
+
 	rdesc->supply_name = "vin";
 	rdesc->ops = &fan53555_regulator_ops;
 	rdesc->type = REGULATOR_VOLTAGE;
-- 
2.0.1

Re: [PATCH 2/5] regulator: fan53555: set regulator name from constraints name

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 470 bytes --]

On Sun, Sep 14, 2014 at 09:23:02PM +0200, Heiko Stuebner wrote:
> There is a high potential of more than one of those regulators existing
> on a board, so name the regulator according to the name provided in the
> initdata instead of statically.

No, this is pointless and broken.  The core will already use the
board-specific name to identify the regulator in diagnostics and so on,
the name being supplied here is supposed to describe the regulator
within the device.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 473 bytes --]

Re: [PATCH 2/5] regulator: fan53555: set regulator name from constraints name

[Heiko Stübner]

[-- Attachment #1: Type: text/plain, Size: 719 bytes --]

Am Montag, 15. September 2014, 09:59:23 schrieb Mark Brown:
> On Sun, Sep 14, 2014 at 09:23:02PM +0200, Heiko Stuebner wrote:
> > There is a high potential of more than one of those regulators existing
> > on a board, so name the regulator according to the name provided in the
> > initdata instead of statically.
> 
> No, this is pointless and broken.  The core will already use the
> board-specific name to identify the regulator in diagnostics and so on,
> the name being supplied here is supposed to describe the regulator
> within the device.

ok, sorry for the mess-up

I've just tested, patches 3-5 apply and work correctly without this one, so do 
you want to apply them like this or a resend of last 3?


Heiko

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 490 bytes --]

Re: [PATCH 2/5] regulator: fan53555: set regulator name from constraints name

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 273 bytes --]

On Tue, Sep 16, 2014 at 12:08:12AM +0200, Heiko Stübner wrote:

> I've just tested, patches 3-5 apply and work correctly without this one, so do 
> you want to apply them like this or a resend of last 3?

No, please implement the changes I asked for in the DT stuff.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 473 bytes --]

[PATCH 3/5] dt-bindings: add devicetree bindings for Fairchild FAN53555 regulators

[Heiko Stuebner]

Document the regulator and add a fairchild vendor-prefix.

Signed-off-by: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
---
 .../devicetree/bindings/regulator/fan53555.txt     | 25 ++++++++++++++++++++++
 .../devicetree/bindings/vendor-prefixes.txt        |  1 +
 2 files changed, 26 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/regulator/fan53555.txt

diff --git a/Documentation/devicetree/bindings/regulator/fan53555.txt b/Documentation/devicetree/bindings/regulator/fan53555.txt
new file mode 100644
index 0000000..2484497
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/fan53555.txt
@@ -0,0 +1,25 @@
+Binding for Fairchild FAN53555 regulators
+
+Required properties:
+  - compatible: "fairchild,fan53555"
+  - reg: I2C address
+
+Optional properties:
+  - fairchild,suspend-regulator: regulator number to use for suspend voltages
+		possible values are either <0> or <1>
+  - fairchild,slew-rate-microvolt: slew rate to use for positive voltage
+		transistions in microvolts per us, possible values are:
+		64000, 32000, 16000, 8000, 4000, 2000, 1000, 500
+  - vin-supply: regulator supplying the vin pin
+
+Example:
+
+	regulator@40 {
+		compatible = "fairchild,fan53555";
+		regulator-name = "fan53555";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&parent_reg>;
+		fairchild,suspend-regulator = <1>;
+		fairchild,slew-rate-microvolt = <64000>;
+	};
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index ac7269f..99da41b 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -49,6 +49,7 @@ epson	Seiko Epson Corp.
 est	ESTeem Wireless Modems
 eukrea  Eukréa Electromatique
 excito	Excito
+fairchild	Fairchild Semiconductor
 fsl	Freescale Semiconductor
 GEFanuc	GE Fanuc Intelligent Platforms Embedded Systems, Inc.
 gef	GE Fanuc Intelligent Platforms Embedded Systems, Inc.
-- 
2.0.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 3/5] dt-bindings: add devicetree bindings for Fairchild FAN53555 regulators

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 335 bytes --]

On Sun, Sep 14, 2014 at 09:23:03PM +0200, Heiko Stuebner wrote:

> +Optional properties:
> +  - fairchild,suspend-regulator: regulator number to use for suspend voltages
> +		possible values are either <0> or <1>

I'm not sure what this means - What exactly is a "regulator" in this
context?  Are there really two separate regulators?

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 473 bytes --]

Re: [PATCH 3/5] dt-bindings: add devicetree bindings for Fairchild FAN53555 regulators

[Heiko Stübner]

[-- Attachment #1: Type: text/plain, Size: 619 bytes --]

Am Montag, 15. September 2014, 14:54:10 schrieb Mark Brown:
> On Sun, Sep 14, 2014 at 09:23:03PM +0200, Heiko Stuebner wrote:
> > +Optional properties:
> > +  - fairchild,suspend-regulator: regulator number to use for suspend
> > voltages +		possible values are either <0> or <1>
> 
> I'm not sure what this means - What exactly is a "regulator" in this
> context?  Are there really two separate regulators?

The fan53555 has two voltage selection registers (VSEL0 and VSEL1) which can 
be switched through a gpio ... to use one as suspend voltage.

So it's just one regulator output but can select one of two voltages.

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 490 bytes --]

Re: [PATCH 3/5] dt-bindings: add devicetree bindings for Fairchild FAN53555 regulators

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 660 bytes --]

On Tue, Sep 16, 2014 at 12:14:43AM +0200, Heiko Stübner wrote:
> Am Montag, 15. September 2014, 14:54:10 schrieb Mark Brown:

> > I'm not sure what this means - What exactly is a "regulator" in this
> > context?  Are there really two separate regulators?

> The fan53555 has two voltage selection registers (VSEL0 and VSEL1) which can 
> be switched through a gpio ... to use one as suspend voltage.

> So it's just one regulator output but can select one of two voltages.

OK, that's what I thought was going on - please fix this to be described
in terms of voltage selector registers rather than regulators as what's
there now seems confusing.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 473 bytes --]

[PATCH 4/5] regulator: fan53555: add devicetree support

[Heiko Stuebner]

Add the ability to parse regulator-data from the devicetree.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 drivers/regulator/fan53555.c | 53 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 53 insertions(+)

diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c
index d143790..0ec1762 100644
--- a/drivers/regulator/fan53555.c
+++ b/drivers/regulator/fan53555.c
@@ -18,6 +18,7 @@
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
 #include <linux/i2c.h>
 #include <linux/slab.h>
 #include <linux/regmap.h>
@@ -233,9 +234,48 @@ static struct regmap_config fan53555_regmap_config = {
 	.val_bits = 8,
 };
 
+static int slew_rates[] = {
+	64000,
+	32000,
+	16000,
+	 8000,
+	 4000,
+	 2000,
+	 1000,
+	  500,
+};
+
+static struct fan53555_platform_data *fan53555_parse_dt(struct device *dev,
+							struct device_node *np)
+{
+	struct fan53555_platform_data *pdata;
+	int ret, i;
+	u32 tmp;
+
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return NULL;
+
+	pdata->regulator = of_get_regulator_init_data(dev, np);
+
+	ret = of_property_read_u32(np, "fairchild,suspend-regulator", &tmp);
+	if (!ret)
+		pdata->sleep_vsel_id = tmp;
+
+	ret = of_property_read_u32(np, "fairchild,slew-rate-microvolt", &tmp);
+	if (!ret) {
+		for (i = 0; i < ARRAY_SIZE(slew_rates); i++)
+			if (slew_rates[i] == tmp)
+				pdata->slew_rate = i;
+	}
+
+	return pdata;
+}
+
 static int fan53555_regulator_probe(struct i2c_client *client,
 				const struct i2c_device_id *id)
 {
+	struct device_node *np = client->dev.of_node;
 	struct fan53555_device_info *di;
 	struct fan53555_platform_data *pdata;
 	struct regulator_config config = { };
@@ -243,6 +283,9 @@ static int fan53555_regulator_probe(struct i2c_client *client,
 	int ret;
 
 	pdata = dev_get_platdata(&client->dev);
+	if (!pdata)
+		pdata = fan53555_parse_dt(&client->dev, np);
+
 	if (!pdata || !pdata->regulator) {
 		dev_err(&client->dev, "Platform data not found!\n");
 		return -ENODEV;
@@ -283,11 +326,14 @@ static int fan53555_regulator_probe(struct i2c_client *client,
 		dev_err(&client->dev, "Failed to setup device!\n");
 		return ret;
 	}
+
 	/* Register regulator */
 	config.dev = di->dev;
 	config.init_data = di->regulator;
 	config.regmap = di->regmap;
 	config.driver_data = di;
+	config.of_node = np;
+
 	ret = fan53555_regulator_register(di, &config);
 	if (ret < 0)
 		dev_err(&client->dev, "Failed to register regulator!\n");
@@ -295,6 +341,12 @@ static int fan53555_regulator_probe(struct i2c_client *client,
 
 }
 
+static const struct of_device_id fan53555_dt_ids[] = {
+	{ .compatible = "fairchild,fan53555" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, fan53555_dt_ids);
+
 static const struct i2c_device_id fan53555_id[] = {
 	{"fan53555", -1},
 	{ },
@@ -303,6 +355,7 @@ static const struct i2c_device_id fan53555_id[] = {
 static struct i2c_driver fan53555_regulator_driver = {
 	.driver = {
 		.name = "fan53555-regulator",
+		.of_match_table = of_match_ptr(fan53555_dt_ids),
 	},
 	.probe = fan53555_regulator_probe,
 	.id_table = fan53555_id,
-- 
2.0.1

[PATCH 5/5] regulator: fan53555: add support for Silergy SYR82x regulators

[Heiko Stuebner]

Silergy SYR82x regulators share the exact same functionality and register layout
as the Fairchild FAN53555 regulators. Therefore extend the driver to add
support for them.

Both types use the same vendor id in their ID1 register, so it's not possible
to distinguish them automatically.

Similarly, the types also do not match. Type 8 used by the SYR827 and SYR828
start at 712.5mV and increment in 12.5mv steps, while the FAN53555 type 8
starts at 600mV and increments in 10mV steps.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 .../devicetree/bindings/regulator/fan53555.txt     |   2 +-
 .../devicetree/bindings/vendor-prefixes.txt        |   1 +
 drivers/regulator/fan53555.c                       | 112 +++++++++++++++++----
 3 files changed, 95 insertions(+), 20 deletions(-)

diff --git a/Documentation/devicetree/bindings/regulator/fan53555.txt b/Documentation/devicetree/bindings/regulator/fan53555.txt
index 2484497..b26f278 100644
--- a/Documentation/devicetree/bindings/regulator/fan53555.txt
+++ b/Documentation/devicetree/bindings/regulator/fan53555.txt
@@ -1,7 +1,7 @@
 Binding for Fairchild FAN53555 regulators
 
 Required properties:
-  - compatible: "fairchild,fan53555"
+  - compatible: one of "fairchild,fan53555", "silergy,syr827", "silergy,syr828"
   - reg: I2C address
 
 Optional properties:
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 99da41b..9e34820 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -125,6 +125,7 @@ sil	Silicon Image
 silabs	Silicon Laboratories
 simtek
 sii	Seiko Instruments, Inc.
+silergy	Silergy Corp.
 sirf	SiRF Technology, Inc.
 smsc	Standard Microsystems Corporation
 snps 	Synopsys, Inc.
diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c
index 0ec1762..89bfd0d 100644
--- a/drivers/regulator/fan53555.c
+++ b/drivers/regulator/fan53555.c
@@ -19,6 +19,7 @@
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/of_regulator.h>
+#include <linux/of_device.h>
 #include <linux/i2c.h>
 #include <linux/slab.h>
 #include <linux/regmap.h>
@@ -51,6 +52,11 @@
 
 #define FAN53555_NVOLTAGES	64	/* Numbers of voltages */
 
+enum fan53555_vendor {
+	FAN53555_VENDOR_FAIRCHILD = 0,
+	FAN53555_VENDOR_SILERGY,
+};
+
 /* IC Type */
 enum {
 	FAN53555_CHIP_ID_00 = 0,
@@ -61,7 +67,12 @@ enum {
 	FAN53555_CHIP_ID_05,
 };
 
+enum {
+	SILERGY_SYR82X = 8,
+};
+
 struct fan53555_device_info {
+	enum fan53555_vendor vendor;
 	struct regmap *regmap;
 	struct device *dev;
 	struct regulator_desc desc;
@@ -149,6 +160,47 @@ static struct regulator_ops fan53555_regulator_ops = {
 	.get_mode = fan53555_get_mode,
 };
 
+static int fan53555_voltages_setup_fairchild(struct fan53555_device_info *di)
+{
+	/* Init voltage range and step */
+	switch (di->chip_id) {
+	case FAN53555_CHIP_ID_00:
+	case FAN53555_CHIP_ID_01:
+	case FAN53555_CHIP_ID_03:
+	case FAN53555_CHIP_ID_05:
+		di->vsel_min = 600000;
+		di->vsel_step = 10000;
+		break;
+	case FAN53555_CHIP_ID_04:
+		di->vsel_min = 603000;
+		di->vsel_step = 12826;
+		break;
+	default:
+		dev_err(di->dev,
+			"Chip ID[%d]\n not supported!\n", di->chip_id);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int fan53555_voltages_setup_silergy(struct fan53555_device_info *di)
+{
+	/* Init voltage range and step */
+	switch (di->chip_id) {
+	case SILERGY_SYR82X:
+		di->vsel_min = 712500;
+		di->vsel_step = 12500;
+		break;
+	default:
+		dev_err(di->dev,
+			"Chip ID[%d]\n not supported!\n", di->chip_id);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 /* For 00,01,03,05 options:
  * VOUT = 0.60V + NSELx * 10mV, from 0.60 to 1.23V.
  * For 04 option:
@@ -158,6 +210,7 @@ static int fan53555_device_setup(struct fan53555_device_info *di,
 				struct fan53555_platform_data *pdata)
 {
 	unsigned int reg, data, mask;
+	int ret = 0;
 
 	/* Setup voltage control register */
 	switch (pdata->sleep_vsel_id) {
@@ -173,24 +226,22 @@ static int fan53555_device_setup(struct fan53555_device_info *di,
 		dev_err(di->dev, "Invalid VSEL ID!\n");
 		return -EINVAL;
 	}
-	/* Init voltage range and step */
-	switch (di->chip_id) {
-	case FAN53555_CHIP_ID_00:
-	case FAN53555_CHIP_ID_01:
-	case FAN53555_CHIP_ID_03:
-	case FAN53555_CHIP_ID_05:
-		di->vsel_min = 600000;
-		di->vsel_step = 10000;
+
+	switch (di->vendor) {
+	case FAN53555_VENDOR_FAIRCHILD:
+		ret = fan53555_voltages_setup_fairchild(di);
 		break;
-	case FAN53555_CHIP_ID_04:
-		di->vsel_min = 603000;
-		di->vsel_step = 12826;
+	case FAN53555_VENDOR_SILERGY:
+		ret = fan53555_voltages_setup_silergy(di);
 		break;
 	default:
 		dev_err(di->dev,
-			"Chip ID[%d]\n not supported!\n", di->chip_id);
+			"vendor %d not supported!\n", di->chip_id);
 		return -EINVAL;
 	}
+	if (ret < 0)
+		return ret;
+
 	/* Init slew rate */
 	if (pdata->slew_rate & 0x7)
 		di->slew_rate = pdata->slew_rate;
@@ -272,6 +323,21 @@ static struct fan53555_platform_data *fan53555_parse_dt(struct device *dev,
 	return pdata;
 }
 
+static const struct of_device_id fan53555_dt_ids[] = {
+	{
+		.compatible = "fairchild,fan53555",
+		.data = (void *)FAN53555_VENDOR_FAIRCHILD
+	}, {
+		.compatible = "silergy,syr827",
+		.data = (void *)FAN53555_VENDOR_SILERGY,
+	}, {
+		.compatible = "silergy,syr828",
+		.data = (void *)FAN53555_VENDOR_SILERGY,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, fan53555_dt_ids);
+
 static int fan53555_regulator_probe(struct i2c_client *client,
 				const struct i2c_device_id *id)
 {
@@ -296,6 +362,19 @@ static int fan53555_regulator_probe(struct i2c_client *client,
 	if (!di)
 		return -ENOMEM;
 
+	if (client->dev.of_node) {
+		const struct of_device_id *match;
+
+		match = of_match_device(of_match_ptr(fan53555_dt_ids),
+					&client->dev);
+		if (!match)
+			return -ENODEV;
+
+		di->vendor = (int) match->data;
+	} else {
+		di->vendor = id->driver_data;
+	}
+
 	di->regmap = devm_regmap_init_i2c(client, &fan53555_regmap_config);
 	if (IS_ERR(di->regmap)) {
 		dev_err(&client->dev, "Failed to allocate regmap!\n");
@@ -341,14 +420,9 @@ static int fan53555_regulator_probe(struct i2c_client *client,
 
 }
 
-static const struct of_device_id fan53555_dt_ids[] = {
-	{ .compatible = "fairchild,fan53555" },
-	{ }
-};
-MODULE_DEVICE_TABLE(of, fan53555_dt_ids);
-
 static const struct i2c_device_id fan53555_id[] = {
-	{"fan53555", -1},
+	{ .name = "fan53555", .driver_data = FAN53555_VENDOR_FAIRCHILD },
+	{ .name = "syr82x", .driver_data = FAN53555_VENDOR_SILERGY },
 	{ },
 };
 
-- 
2.0.1

Re: [PATCH 5/5] regulator: fan53555: add support for Silergy SYR82x regulators

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 294 bytes --]

On Sun, Sep 14, 2014 at 09:23:05PM +0200, Heiko Stuebner wrote:
> Silergy SYR82x regulators share the exact same functionality and register layout
> as the Fairchild FAN53555 regulators. Therefore extend the driver to add
> support for them.

This seems OK but depends on the previous patches.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 473 bytes --]