Re: [PATCH v6 1/3] mfd: devicetree: bindings: Add Qualcomm RPM DT binding

[Bjorn Andersson <bjorn.andersson@sonymobile.com>]

On Wed 17 Sep 09:15 PDT 2014, Lee Jones wrote:

> On Tue, 26 Aug 2014, Lee Jones wrote:
> 
> > On Mon, 25 Aug 2014, Bjorn Andersson wrote:
> > 
> > > Add binding for the Qualcomm Resource Power Manager (RPM) found in 8660,
> > > 8960 and 8064 based devices. The binding currently describes the rpm
> > > itself and the regulator subnodes.
> > > 
> > > Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
> > > ---
> > >  Documentation/devicetree/bindings/mfd/qcom,rpm.txt |  246 ++++++++++++++++++++
> > >  include/dt-bindings/mfd/qcom,rpm.h                 |  154 ++++++++++++
> > >  2 files changed, 400 insertions(+)
> > >  create mode 100644 Documentation/devicetree/bindings/mfd/qcom,rpm.txt
> > >  create mode 100644 include/dt-bindings/mfd/qcom,rpm.h
> > 
> > Please use the same filename formatting as the existing files.
> 
> Are you going to resubmit this (and answer my question on the
> regulator patch)?
> 

I'll resubmit all three parts after changing the filename of the dt header.

The regulator driver have a strong dependency on the mfd driver, but Kconfig
will make sure it's not selectable until the two parts merges again, so it
should be fine. But I guess it's up to Mark?

Regards,
Bjorn