* [PATCH v6 2/3] mfd: qcom-rpm: Driver for the Qualcomm RPM
2014-08-26 4:58 [PATCH v6 0/3] Qualcomm Resource Power Manager driver Bjorn Andersson
2014-08-26 4:58 ` [PATCH v6 1/3] mfd: devicetree: bindings: Add Qualcomm RPM DT binding Bjorn Andersson
@ 2014-08-26 4:58 ` Bjorn Andersson
2014-09-04 9:39 ` Lee Jones
2014-08-26 4:58 ` [PATCH v6 3/3] regulator: qcom-rpm: Regulator driver " Bjorn Andersson
2 siblings, 1 reply; 9+ messages in thread
From: Bjorn Andersson @ 2014-08-26 4:58 UTC (permalink / raw)
To: Lee Jones
Cc: Rob Herring, Mark Brown, Pawel Moll, Andy Gross, Mark Rutland,
Kevin Hilman, Kumar Gala, Josh Cartwright, devicetree,
linux-kernel, linux-arm-kernel, linux-arm-msm
Driver for the Resource Power Manager (RPM) found in Qualcomm 8660, 8960
and 8064 based devices. The driver exposes resources that child drivers
can operate on; to implementing regulator, clock and bus frequency
drivers.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
---
drivers/mfd/Kconfig | 14 +
drivers/mfd/Makefile | 1 +
drivers/mfd/qcom_rpm.c | 580 ++++++++++++++++++++++++++++++++++++++++++
include/linux/mfd/qcom_rpm.h | 10 +
4 files changed, 605 insertions(+)
create mode 100644 drivers/mfd/qcom_rpm.c
create mode 100644 include/linux/mfd/qcom_rpm.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index de5abf2..6743e88 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -539,6 +539,20 @@ config MFD_PM8921_CORE
Say M here if you want to include support for PM8921 chip as a module.
This will build a module called "pm8921-core".
+config MFD_QCOM_RPM
+ tristate "Qualcomm Resource Power Manager (RPM)"
+ depends on ARCH_QCOM && OF
+ help
+ If you say yes to this option, support will be included for the
+ Resource Power Manager system found in the Qualcomm 8660, 8960 and
+ 8064 based devices.
+
+ This is required to access many regulators, clocks and bus
+ frequencies controlled by the RPM on these devices.
+
+ Say M here if you want to include support for the Qualcomm RPM as a
+ module. This will build a module called "qcom_rpm".
+
config MFD_RDC321X
tristate "RDC R-321x southbridge"
select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index f001487..3f2fc89 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -153,6 +153,7 @@ obj-$(CONFIG_MFD_SI476X_CORE) += si476x-core.o
obj-$(CONFIG_MFD_CS5535) += cs5535-mfd.o
obj-$(CONFIG_MFD_OMAP_USB_HOST) += omap-usb-host.o omap-usb-tll.o
obj-$(CONFIG_MFD_PM8921_CORE) += pm8921-core.o ssbi.o
+obj-$(CONFIG_MFD_QCOM_RPM) += qcom_rpm.o
obj-$(CONFIG_TPS65911_COMPARATOR) += tps65911-comparator.o
obj-$(CONFIG_MFD_TPS65090) += tps65090.o
obj-$(CONFIG_MFD_AAT2870_CORE) += aat2870-core.o
diff --git a/drivers/mfd/qcom_rpm.c b/drivers/mfd/qcom_rpm.c
new file mode 100644
index 0000000..f006433
--- /dev/null
+++ b/drivers/mfd/qcom_rpm.c
@@ -0,0 +1,580 @@
+/*
+ * Copyright (c) 2014, Sony Mobile Communications AB.
+ * Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ * Author: Bjorn Andersson <bjorn.andersson@sonymobile.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of_platform.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/qcom_rpm.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/mfd/qcom,rpm.h>
+
+struct qcom_rpm_resource {
+ unsigned target_id;
+ unsigned status_id;
+ unsigned select_id;
+ unsigned size;
+};
+
+struct qcom_rpm_data {
+ u32 version;
+ const struct qcom_rpm_resource *resource_table;
+ unsigned n_resources;
+};
+
+struct qcom_rpm {
+ struct device *dev;
+ struct regmap *ipc_regmap;
+ unsigned ipc_offset;
+ unsigned ipc_bit;
+
+ struct completion ack;
+ struct mutex lock;
+
+ void __iomem *status_regs;
+ void __iomem *ctrl_regs;
+ void __iomem *req_regs;
+
+ u32 ack_status;
+
+ const struct qcom_rpm_data *data;
+};
+
+#define RPM_STATUS_REG(rpm, i) ((rpm)->status_regs + (i) * 4)
+#define RPM_CTRL_REG(rpm, i) ((rpm)->ctrl_regs + (i) * 4)
+#define RPM_REQ_REG(rpm, i) ((rpm)->req_regs + (i) * 4)
+
+#define RPM_REQUEST_TIMEOUT (5 * HZ)
+
+#define RPM_REQUEST_CONTEXT 3
+#define RPM_REQ_SELECT 11
+#define RPM_ACK_CONTEXT 15
+#define RPM_ACK_SELECTOR 23
+#define RPM_SELECT_SIZE 7
+
+#define RPM_ACTIVE_STATE BIT(0)
+#define RPM_NOTIFICATION BIT(30)
+#define RPM_REJECTED BIT(31)
+
+#define RPM_SIGNAL BIT(2)
+
+static const struct qcom_rpm_resource apq8064_rpm_resource_table[] = {
+ [QCOM_RPM_CXO_CLK] = { 25, 9, 5, 1 },
+ [QCOM_RPM_PXO_CLK] = { 26, 10, 6, 1 },
+ [QCOM_RPM_APPS_FABRIC_CLK] = { 27, 11, 8, 1 },
+ [QCOM_RPM_SYS_FABRIC_CLK] = { 28, 12, 9, 1 },
+ [QCOM_RPM_MM_FABRIC_CLK] = { 29, 13, 10, 1 },
+ [QCOM_RPM_DAYTONA_FABRIC_CLK] = { 30, 14, 11, 1 },
+ [QCOM_RPM_SFPB_CLK] = { 31, 15, 12, 1 },
+ [QCOM_RPM_CFPB_CLK] = { 32, 16, 13, 1 },
+ [QCOM_RPM_MMFPB_CLK] = { 33, 17, 14, 1 },
+ [QCOM_RPM_EBI1_CLK] = { 34, 18, 16, 1 },
+ [QCOM_RPM_APPS_FABRIC_HALT] = { 35, 19, 18, 1 },
+ [QCOM_RPM_APPS_FABRIC_MODE] = { 37, 20, 19, 1 },
+ [QCOM_RPM_APPS_FABRIC_IOCTL] = { 40, 21, 20, 1 },
+ [QCOM_RPM_APPS_FABRIC_ARB] = { 41, 22, 21, 12 },
+ [QCOM_RPM_SYS_FABRIC_HALT] = { 53, 23, 22, 1 },
+ [QCOM_RPM_SYS_FABRIC_MODE] = { 55, 24, 23, 1 },
+ [QCOM_RPM_SYS_FABRIC_IOCTL] = { 58, 25, 24, 1 },
+ [QCOM_RPM_SYS_FABRIC_ARB] = { 59, 26, 25, 30 },
+ [QCOM_RPM_MM_FABRIC_HALT] = { 89, 27, 26, 1 },
+ [QCOM_RPM_MM_FABRIC_MODE] = { 91, 28, 27, 1 },
+ [QCOM_RPM_MM_FABRIC_IOCTL] = { 94, 29, 28, 1 },
+ [QCOM_RPM_MM_FABRIC_ARB] = { 95, 30, 29, 21 },
+ [QCOM_RPM_PM8921_SMPS1] = { 116, 31, 30, 2 },
+ [QCOM_RPM_PM8921_SMPS2] = { 118, 33, 31, 2 },
+ [QCOM_RPM_PM8921_SMPS3] = { 120, 35, 32, 2 },
+ [QCOM_RPM_PM8921_SMPS4] = { 122, 37, 33, 2 },
+ [QCOM_RPM_PM8921_SMPS5] = { 124, 39, 34, 2 },
+ [QCOM_RPM_PM8921_SMPS6] = { 126, 41, 35, 2 },
+ [QCOM_RPM_PM8921_SMPS7] = { 128, 43, 36, 2 },
+ [QCOM_RPM_PM8921_SMPS8] = { 130, 45, 37, 2 },
+ [QCOM_RPM_PM8921_LDO1] = { 132, 47, 38, 2 },
+ [QCOM_RPM_PM8921_LDO2] = { 134, 49, 39, 2 },
+ [QCOM_RPM_PM8921_LDO3] = { 136, 51, 40, 2 },
+ [QCOM_RPM_PM8921_LDO4] = { 138, 53, 41, 2 },
+ [QCOM_RPM_PM8921_LDO5] = { 140, 55, 42, 2 },
+ [QCOM_RPM_PM8921_LDO6] = { 142, 57, 43, 2 },
+ [QCOM_RPM_PM8921_LDO7] = { 144, 59, 44, 2 },
+ [QCOM_RPM_PM8921_LDO8] = { 146, 61, 45, 2 },
+ [QCOM_RPM_PM8921_LDO9] = { 148, 63, 46, 2 },
+ [QCOM_RPM_PM8921_LDO10] = { 150, 65, 47, 2 },
+ [QCOM_RPM_PM8921_LDO11] = { 152, 67, 48, 2 },
+ [QCOM_RPM_PM8921_LDO12] = { 154, 69, 49, 2 },
+ [QCOM_RPM_PM8921_LDO13] = { 156, 71, 50, 2 },
+ [QCOM_RPM_PM8921_LDO14] = { 158, 73, 51, 2 },
+ [QCOM_RPM_PM8921_LDO15] = { 160, 75, 52, 2 },
+ [QCOM_RPM_PM8921_LDO16] = { 162, 77, 53, 2 },
+ [QCOM_RPM_PM8921_LDO17] = { 164, 79, 54, 2 },
+ [QCOM_RPM_PM8921_LDO18] = { 166, 81, 55, 2 },
+ [QCOM_RPM_PM8921_LDO19] = { 168, 83, 56, 2 },
+ [QCOM_RPM_PM8921_LDO20] = { 170, 85, 57, 2 },
+ [QCOM_RPM_PM8921_LDO21] = { 172, 87, 58, 2 },
+ [QCOM_RPM_PM8921_LDO22] = { 174, 89, 59, 2 },
+ [QCOM_RPM_PM8921_LDO23] = { 176, 91, 60, 2 },
+ [QCOM_RPM_PM8921_LDO24] = { 178, 93, 61, 2 },
+ [QCOM_RPM_PM8921_LDO25] = { 180, 95, 62, 2 },
+ [QCOM_RPM_PM8921_LDO26] = { 182, 97, 63, 2 },
+ [QCOM_RPM_PM8921_LDO27] = { 184, 99, 64, 2 },
+ [QCOM_RPM_PM8921_LDO28] = { 186, 101, 65, 2 },
+ [QCOM_RPM_PM8921_LDO29] = { 188, 103, 66, 2 },
+ [QCOM_RPM_PM8921_CLK1] = { 190, 105, 67, 2 },
+ [QCOM_RPM_PM8921_CLK2] = { 192, 107, 68, 2 },
+ [QCOM_RPM_PM8921_LVS1] = { 194, 109, 69, 1 },
+ [QCOM_RPM_PM8921_LVS2] = { 195, 110, 70, 1 },
+ [QCOM_RPM_PM8921_LVS3] = { 196, 111, 71, 1 },
+ [QCOM_RPM_PM8921_LVS4] = { 197, 112, 72, 1 },
+ [QCOM_RPM_PM8921_LVS5] = { 198, 113, 73, 1 },
+ [QCOM_RPM_PM8921_LVS6] = { 199, 114, 74, 1 },
+ [QCOM_RPM_PM8921_LVS7] = { 200, 115, 75, 1 },
+ [QCOM_RPM_PM8821_SMPS1] = { 201, 116, 76, 2 },
+ [QCOM_RPM_PM8821_SMPS2] = { 203, 118, 77, 2 },
+ [QCOM_RPM_PM8821_LDO1] = { 205, 120, 78, 2 },
+ [QCOM_RPM_PM8921_NCP] = { 207, 122, 80, 2 },
+ [QCOM_RPM_CXO_BUFFERS] = { 209, 124, 81, 1 },
+ [QCOM_RPM_USB_OTG_SWITCH] = { 210, 125, 82, 1 },
+ [QCOM_RPM_HDMI_SWITCH] = { 211, 126, 83, 1 },
+ [QCOM_RPM_DDR_DMM] = { 212, 127, 84, 2 },
+ [QCOM_RPM_VDDMIN_GPIO] = { 215, 131, 89, 1 },
+};
+
+static const struct qcom_rpm_data apq8064_template = {
+ .version = 3,
+ .resource_table = apq8064_rpm_resource_table,
+ .n_resources = ARRAY_SIZE(apq8064_rpm_resource_table),
+};
+
+static const struct qcom_rpm_resource msm8660_rpm_resource_table[] = {
+ [QCOM_RPM_CXO_CLK] = { 32, 12, 5, 1 },
+ [QCOM_RPM_PXO_CLK] = { 33, 13, 6, 1 },
+ [QCOM_RPM_PLL_4] = { 34, 14, 7, 1 },
+ [QCOM_RPM_APPS_FABRIC_CLK] = { 35, 15, 8, 1 },
+ [QCOM_RPM_SYS_FABRIC_CLK] = { 36, 16, 9, 1 },
+ [QCOM_RPM_MM_FABRIC_CLK] = { 37, 17, 10, 1 },
+ [QCOM_RPM_DAYTONA_FABRIC_CLK] = { 38, 18, 11, 1 },
+ [QCOM_RPM_SFPB_CLK] = { 39, 19, 12, 1 },
+ [QCOM_RPM_CFPB_CLK] = { 40, 20, 13, 1 },
+ [QCOM_RPM_MMFPB_CLK] = { 41, 21, 14, 1 },
+ [QCOM_RPM_SMI_CLK] = { 42, 22, 15, 1 },
+ [QCOM_RPM_EBI1_CLK] = { 43, 23, 16, 1 },
+ [QCOM_RPM_APPS_L2_CACHE_CTL] = { 44, 24, 17, 1 },
+ [QCOM_RPM_APPS_FABRIC_HALT] = { 45, 25, 18, 2 },
+ [QCOM_RPM_APPS_FABRIC_MODE] = { 47, 26, 19, 3 },
+ [QCOM_RPM_APPS_FABRIC_ARB] = { 51, 28, 21, 6 },
+ [QCOM_RPM_SYS_FABRIC_HALT] = { 63, 29, 22, 2 },
+ [QCOM_RPM_SYS_FABRIC_MODE] = { 65, 30, 23, 3 },
+ [QCOM_RPM_SYS_FABRIC_ARB] = { 69, 32, 25, 22 },
+ [QCOM_RPM_MM_FABRIC_HALT] = { 105, 33, 26, 2 },
+ [QCOM_RPM_MM_FABRIC_MODE] = { 107, 34, 27, 3 },
+ [QCOM_RPM_MM_FABRIC_ARB] = { 111, 36, 29, 23 },
+ [QCOM_RPM_PM8901_SMPS0] = { 134, 37, 30, 2 },
+ [QCOM_RPM_PM8901_SMPS1] = { 136, 39, 31, 2 },
+ [QCOM_RPM_PM8901_SMPS2] = { 138, 41, 32, 2 },
+ [QCOM_RPM_PM8901_SMPS3] = { 140, 43, 33, 2 },
+ [QCOM_RPM_PM8901_SMPS4] = { 142, 45, 34, 2 },
+ [QCOM_RPM_PM8901_LDO0] = { 144, 47, 35, 2 },
+ [QCOM_RPM_PM8901_LDO1] = { 146, 49, 36, 2 },
+ [QCOM_RPM_PM8901_LDO2] = { 148, 51, 37, 2 },
+ [QCOM_RPM_PM8901_LDO3] = { 150, 53, 38, 2 },
+ [QCOM_RPM_PM8901_LDO4] = { 152, 55, 39, 2 },
+ [QCOM_RPM_PM8901_LDO5] = { 154, 57, 40, 2 },
+ [QCOM_RPM_PM8901_LDO6] = { 156, 59, 41, 2 },
+ [QCOM_RPM_PM8901_LVS0] = { 158, 61, 42, 1 },
+ [QCOM_RPM_PM8901_LVS1] = { 159, 62, 43, 1 },
+ [QCOM_RPM_PM8901_LVS2] = { 160, 63, 44, 1 },
+ [QCOM_RPM_PM8901_LVS3] = { 161, 64, 45, 1 },
+ [QCOM_RPM_PM8901_MVS] = { 162, 65, 46, 1 },
+ [QCOM_RPM_PM8058_SMPS0] = { 163, 66, 47, 2 },
+ [QCOM_RPM_PM8058_SMPS1] = { 165, 68, 48, 2 },
+ [QCOM_RPM_PM8058_SMPS2] = { 167, 70, 49, 2 },
+ [QCOM_RPM_PM8058_SMPS3] = { 169, 72, 50, 2 },
+ [QCOM_RPM_PM8058_SMPS4] = { 171, 74, 51, 2 },
+ [QCOM_RPM_PM8058_LDO0] = { 173, 76, 52, 2 },
+ [QCOM_RPM_PM8058_LDO1] = { 175, 78, 53, 2 },
+ [QCOM_RPM_PM8058_LDO2] = { 177, 80, 54, 2 },
+ [QCOM_RPM_PM8058_LDO3] = { 179, 82, 55, 2 },
+ [QCOM_RPM_PM8058_LDO4] = { 181, 84, 56, 2 },
+ [QCOM_RPM_PM8058_LDO5] = { 183, 86, 57, 2 },
+ [QCOM_RPM_PM8058_LDO6] = { 185, 88, 58, 2 },
+ [QCOM_RPM_PM8058_LDO7] = { 187, 90, 59, 2 },
+ [QCOM_RPM_PM8058_LDO8] = { 189, 92, 60, 2 },
+ [QCOM_RPM_PM8058_LDO9] = { 191, 94, 61, 2 },
+ [QCOM_RPM_PM8058_LDO10] = { 193, 96, 62, 2 },
+ [QCOM_RPM_PM8058_LDO11] = { 195, 98, 63, 2 },
+ [QCOM_RPM_PM8058_LDO12] = { 197, 100, 64, 2 },
+ [QCOM_RPM_PM8058_LDO13] = { 199, 102, 65, 2 },
+ [QCOM_RPM_PM8058_LDO14] = { 201, 104, 66, 2 },
+ [QCOM_RPM_PM8058_LDO15] = { 203, 106, 67, 2 },
+ [QCOM_RPM_PM8058_LDO16] = { 205, 108, 68, 2 },
+ [QCOM_RPM_PM8058_LDO17] = { 207, 110, 69, 2 },
+ [QCOM_RPM_PM8058_LDO18] = { 209, 112, 70, 2 },
+ [QCOM_RPM_PM8058_LDO19] = { 211, 114, 71, 2 },
+ [QCOM_RPM_PM8058_LDO20] = { 213, 116, 72, 2 },
+ [QCOM_RPM_PM8058_LDO21] = { 215, 118, 73, 2 },
+ [QCOM_RPM_PM8058_LDO22] = { 217, 120, 74, 2 },
+ [QCOM_RPM_PM8058_LDO23] = { 219, 122, 75, 2 },
+ [QCOM_RPM_PM8058_LDO24] = { 221, 124, 76, 2 },
+ [QCOM_RPM_PM8058_LDO25] = { 223, 126, 77, 2 },
+ [QCOM_RPM_PM8058_LVS0] = { 225, 128, 78, 1 },
+ [QCOM_RPM_PM8058_LVS1] = { 226, 129, 79, 1 },
+ [QCOM_RPM_PM8058_NCP] = { 227, 130, 80, 2 },
+ [QCOM_RPM_CXO_BUFFERS] = { 229, 132, 81, 1 },
+};
+
+static const struct qcom_rpm_data msm8660_template = {
+ .version = 2,
+ .resource_table = msm8660_rpm_resource_table,
+ .n_resources = ARRAY_SIZE(msm8660_rpm_resource_table),
+};
+
+static const struct qcom_rpm_resource msm8960_rpm_resource_table[] = {
+ [QCOM_RPM_CXO_CLK] = { 25, 9, 5, 1 },
+ [QCOM_RPM_PXO_CLK] = { 26, 10, 6, 1 },
+ [QCOM_RPM_APPS_FABRIC_CLK] = { 27, 11, 8, 1 },
+ [QCOM_RPM_SYS_FABRIC_CLK] = { 28, 12, 9, 1 },
+ [QCOM_RPM_MM_FABRIC_CLK] = { 29, 13, 10, 1 },
+ [QCOM_RPM_DAYTONA_FABRIC_CLK] = { 30, 14, 11, 1 },
+ [QCOM_RPM_SFPB_CLK] = { 31, 15, 12, 1 },
+ [QCOM_RPM_CFPB_CLK] = { 32, 16, 13, 1 },
+ [QCOM_RPM_MMFPB_CLK] = { 33, 17, 14, 1 },
+ [QCOM_RPM_EBI1_CLK] = { 34, 18, 16, 1 },
+ [QCOM_RPM_APPS_FABRIC_HALT] = { 35, 19, 18, 1 },
+ [QCOM_RPM_APPS_FABRIC_MODE] = { 37, 20, 19, 1 },
+ [QCOM_RPM_APPS_FABRIC_IOCTL] = { 40, 21, 20, 1 },
+ [QCOM_RPM_APPS_FABRIC_ARB] = { 41, 22, 21, 12 },
+ [QCOM_RPM_SYS_FABRIC_HALT] = { 53, 23, 22, 1 },
+ [QCOM_RPM_SYS_FABRIC_MODE] = { 55, 24, 23, 1 },
+ [QCOM_RPM_SYS_FABRIC_IOCTL] = { 58, 25, 24, 1 },
+ [QCOM_RPM_SYS_FABRIC_ARB] = { 59, 26, 25, 29 },
+ [QCOM_RPM_MM_FABRIC_HALT] = { 88, 27, 26, 1 },
+ [QCOM_RPM_MM_FABRIC_MODE] = { 90, 28, 27, 1 },
+ [QCOM_RPM_MM_FABRIC_IOCTL] = { 93, 29, 28, 1 },
+ [QCOM_RPM_MM_FABRIC_ARB] = { 94, 30, 29, 23 },
+ [QCOM_RPM_PM8921_SMPS1] = { 117, 31, 30, 2 },
+ [QCOM_RPM_PM8921_SMPS2] = { 119, 33, 31, 2 },
+ [QCOM_RPM_PM8921_SMPS3] = { 121, 35, 32, 2 },
+ [QCOM_RPM_PM8921_SMPS4] = { 123, 37, 33, 2 },
+ [QCOM_RPM_PM8921_SMPS5] = { 125, 39, 34, 2 },
+ [QCOM_RPM_PM8921_SMPS6] = { 127, 41, 35, 2 },
+ [QCOM_RPM_PM8921_SMPS7] = { 129, 43, 36, 2 },
+ [QCOM_RPM_PM8921_SMPS8] = { 131, 45, 37, 2 },
+ [QCOM_RPM_PM8921_LDO1] = { 133, 47, 38, 2 },
+ [QCOM_RPM_PM8921_LDO2] = { 135, 49, 39, 2 },
+ [QCOM_RPM_PM8921_LDO3] = { 137, 51, 40, 2 },
+ [QCOM_RPM_PM8921_LDO4] = { 139, 53, 41, 2 },
+ [QCOM_RPM_PM8921_LDO5] = { 141, 55, 42, 2 },
+ [QCOM_RPM_PM8921_LDO6] = { 143, 57, 43, 2 },
+ [QCOM_RPM_PM8921_LDO7] = { 145, 59, 44, 2 },
+ [QCOM_RPM_PM8921_LDO8] = { 147, 61, 45, 2 },
+ [QCOM_RPM_PM8921_LDO9] = { 149, 63, 46, 2 },
+ [QCOM_RPM_PM8921_LDO10] = { 151, 65, 47, 2 },
+ [QCOM_RPM_PM8921_LDO11] = { 153, 67, 48, 2 },
+ [QCOM_RPM_PM8921_LDO12] = { 155, 69, 49, 2 },
+ [QCOM_RPM_PM8921_LDO13] = { 157, 71, 50, 2 },
+ [QCOM_RPM_PM8921_LDO14] = { 159, 73, 51, 2 },
+ [QCOM_RPM_PM8921_LDO15] = { 161, 75, 52, 2 },
+ [QCOM_RPM_PM8921_LDO16] = { 163, 77, 53, 2 },
+ [QCOM_RPM_PM8921_LDO17] = { 165, 79, 54, 2 },
+ [QCOM_RPM_PM8921_LDO18] = { 167, 81, 55, 2 },
+ [QCOM_RPM_PM8921_LDO19] = { 169, 83, 56, 2 },
+ [QCOM_RPM_PM8921_LDO20] = { 171, 85, 57, 2 },
+ [QCOM_RPM_PM8921_LDO21] = { 173, 87, 58, 2 },
+ [QCOM_RPM_PM8921_LDO22] = { 175, 89, 59, 2 },
+ [QCOM_RPM_PM8921_LDO23] = { 177, 91, 60, 2 },
+ [QCOM_RPM_PM8921_LDO24] = { 179, 93, 61, 2 },
+ [QCOM_RPM_PM8921_LDO25] = { 181, 95, 62, 2 },
+ [QCOM_RPM_PM8921_LDO26] = { 183, 97, 63, 2 },
+ [QCOM_RPM_PM8921_LDO27] = { 185, 99, 64, 2 },
+ [QCOM_RPM_PM8921_LDO28] = { 187, 101, 65, 2 },
+ [QCOM_RPM_PM8921_LDO29] = { 189, 103, 66, 2 },
+ [QCOM_RPM_PM8921_CLK1] = { 191, 105, 67, 2 },
+ [QCOM_RPM_PM8921_CLK2] = { 193, 107, 68, 2 },
+ [QCOM_RPM_PM8921_LVS1] = { 195, 109, 69, 1 },
+ [QCOM_RPM_PM8921_LVS2] = { 196, 110, 70, 1 },
+ [QCOM_RPM_PM8921_LVS3] = { 197, 111, 71, 1 },
+ [QCOM_RPM_PM8921_LVS4] = { 198, 112, 72, 1 },
+ [QCOM_RPM_PM8921_LVS5] = { 199, 113, 73, 1 },
+ [QCOM_RPM_PM8921_LVS6] = { 200, 114, 74, 1 },
+ [QCOM_RPM_PM8921_LVS7] = { 201, 115, 75, 1 },
+ [QCOM_RPM_PM8921_NCP] = { 202, 116, 80, 2 },
+ [QCOM_RPM_CXO_BUFFERS] = { 204, 118, 81, 1 },
+ [QCOM_RPM_USB_OTG_SWITCH] = { 205, 119, 82, 1 },
+ [QCOM_RPM_HDMI_SWITCH] = { 206, 120, 83, 1 },
+ [QCOM_RPM_DDR_DMM] = { 207, 121, 84, 2 },
+};
+
+static const struct qcom_rpm_data msm8960_template = {
+ .version = 3,
+ .resource_table = msm8960_rpm_resource_table,
+ .n_resources = ARRAY_SIZE(msm8960_rpm_resource_table),
+};
+
+static const struct of_device_id qcom_rpm_of_match[] = {
+ { .compatible = "qcom,rpm-apq8064", .data = &apq8064_template },
+ { .compatible = "qcom,rpm-msm8660", .data = &msm8660_template },
+ { .compatible = "qcom,rpm-msm8960", .data = &msm8960_template },
+ { }
+};
+MODULE_DEVICE_TABLE(of, qcom_rpm_of_match);
+
+int qcom_rpm_write(struct qcom_rpm *rpm, int resource, u32 *buf, size_t count)
+{
+ const struct qcom_rpm_resource *res;
+ const struct qcom_rpm_data *data = rpm->data;
+ u32 sel_mask[RPM_SELECT_SIZE] = { 0 };
+ int left;
+ int ret = 0;
+ int i;
+
+ if (WARN_ON(resource < 0 || resource >= data->n_resources))
+ return -EINVAL;
+
+ res = &data->resource_table[resource];
+ if (WARN_ON(res->size != count))
+ return -EINVAL;
+
+ mutex_lock(&rpm->lock);
+
+ for (i = 0; i < res->size; i++)
+ writel_relaxed(buf[i], RPM_REQ_REG(rpm, res->target_id + i));
+
+ bitmap_set((unsigned long *)sel_mask, res->select_id, 1);
+ for (i = 0; i < ARRAY_SIZE(sel_mask); i++) {
+ writel_relaxed(sel_mask[i],
+ RPM_CTRL_REG(rpm, RPM_REQ_SELECT + i));
+ }
+
+ writel_relaxed(RPM_ACTIVE_STATE,
+ RPM_CTRL_REG(rpm, RPM_REQUEST_CONTEXT));
+
+ reinit_completion(&rpm->ack);
+ regmap_write(rpm->ipc_regmap, rpm->ipc_offset, BIT(rpm->ipc_bit));
+
+ left = wait_for_completion_timeout(&rpm->ack, RPM_REQUEST_TIMEOUT);
+ if (!left)
+ ret = -ETIMEDOUT;
+ else if (rpm->ack_status & RPM_REJECTED)
+ ret = -EIO;
+
+ mutex_unlock(&rpm->lock);
+
+ return ret;
+}
+EXPORT_SYMBOL(qcom_rpm_write);
+
+static irqreturn_t qcom_rpm_ack_interrupt(int irq, void *dev)
+{
+ struct qcom_rpm *rpm = dev;
+ u32 ack;
+ int i;
+
+ ack = readl_relaxed(RPM_CTRL_REG(rpm, RPM_ACK_CONTEXT));
+ for (i = 0; i < RPM_SELECT_SIZE; i++)
+ writel_relaxed(0, RPM_CTRL_REG(rpm, RPM_ACK_SELECTOR + i));
+ writel(0, RPM_CTRL_REG(rpm, RPM_ACK_CONTEXT));
+
+ if (ack & RPM_NOTIFICATION) {
+ dev_warn(rpm->dev, "ignoring notification!\n");
+ } else {
+ rpm->ack_status = ack;
+ complete(&rpm->ack);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t qcom_rpm_err_interrupt(int irq, void *dev)
+{
+ struct qcom_rpm *rpm = dev;
+
+ regmap_write(rpm->ipc_regmap, rpm->ipc_offset, BIT(rpm->ipc_bit));
+ dev_err(rpm->dev, "RPM triggered fatal error\n");
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t qcom_rpm_wakeup_interrupt(int irq, void *dev)
+{
+ return IRQ_HANDLED;
+}
+
+static int qcom_rpm_probe(struct platform_device *pdev)
+{
+ const struct of_device_id *match;
+ struct device_node *syscon_np;
+ struct resource *res;
+ struct qcom_rpm *rpm;
+ u32 fw_version[3];
+ int irq_wakeup;
+ int irq_ack;
+ int irq_err;
+ int ret;
+
+ rpm = devm_kzalloc(&pdev->dev, sizeof(*rpm), GFP_KERNEL);
+ if (!rpm)
+ return -ENOMEM;
+
+ rpm->dev = &pdev->dev;
+ mutex_init(&rpm->lock);
+ init_completion(&rpm->ack);
+
+ irq_ack = platform_get_irq_byname(pdev, "ack");
+ if (irq_ack < 0) {
+ dev_err(&pdev->dev, "required ack interrupt missing\n");
+ return irq_ack;
+ }
+
+ irq_err = platform_get_irq_byname(pdev, "err");
+ if (irq_err < 0) {
+ dev_err(&pdev->dev, "required err interrupt missing\n");
+ return irq_err;
+ }
+
+ irq_wakeup = platform_get_irq_byname(pdev, "wakeup");
+ if (irq_wakeup < 0) {
+ dev_err(&pdev->dev, "required wakeup interrupt missing\n");
+ return irq_wakeup;
+ }
+
+ match = of_match_device(qcom_rpm_of_match, &pdev->dev);
+ rpm->data = match->data;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ rpm->status_regs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(rpm->status_regs))
+ return PTR_ERR(rpm->status_regs);
+ rpm->ctrl_regs = rpm->status_regs + 0x400;
+ rpm->req_regs = rpm->status_regs + 0x600;
+
+ syscon_np = of_parse_phandle(pdev->dev.of_node, "qcom,ipc", 0);
+ if (!syscon_np) {
+ dev_err(&pdev->dev, "no qcom,ipc node\n");
+ return -ENODEV;
+ }
+
+ rpm->ipc_regmap = syscon_node_to_regmap(syscon_np);
+ if (IS_ERR(rpm->ipc_regmap))
+ return PTR_ERR(rpm->ipc_regmap);
+
+ ret = of_property_read_u32_index(pdev->dev.of_node, "qcom,ipc", 1,
+ &rpm->ipc_offset);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "no offset in qcom,ipc\n");
+ return -EINVAL;
+ }
+
+ ret = of_property_read_u32_index(pdev->dev.of_node, "qcom,ipc", 2,
+ &rpm->ipc_bit);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "no bit in qcom,ipc\n");
+ return -EINVAL;
+ }
+
+ dev_set_drvdata(&pdev->dev, rpm);
+
+ fw_version[0] = readl(RPM_STATUS_REG(rpm, 0));
+ fw_version[1] = readl(RPM_STATUS_REG(rpm, 1));
+ fw_version[2] = readl(RPM_STATUS_REG(rpm, 2));
+ if (fw_version[0] != rpm->data->version) {
+ dev_err(&pdev->dev,
+ "RPM version %u.%u.%u incompatible with driver version %u",
+ fw_version[0],
+ fw_version[1],
+ fw_version[2],
+ rpm->data->version);
+ return -EFAULT;
+ }
+
+ dev_info(&pdev->dev, "RPM firmware %u.%u.%u\n", fw_version[0],
+ fw_version[1],
+ fw_version[2]);
+
+ ret = devm_request_irq(&pdev->dev,
+ irq_ack,
+ qcom_rpm_ack_interrupt,
+ IRQF_TRIGGER_RISING | IRQF_NO_SUSPEND,
+ "qcom_rpm_ack",
+ rpm);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to request ack interrupt\n");
+ return ret;
+ }
+
+ ret = irq_set_irq_wake(irq_ack, 1);
+ if (ret)
+ dev_warn(&pdev->dev, "failed to mark ack irq as wakeup\n");
+
+ ret = devm_request_irq(&pdev->dev,
+ irq_err,
+ qcom_rpm_err_interrupt,
+ IRQF_TRIGGER_RISING,
+ "qcom_rpm_err",
+ rpm);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to request err interrupt\n");
+ return ret;
+ }
+
+ ret = devm_request_irq(&pdev->dev,
+ irq_wakeup,
+ qcom_rpm_wakeup_interrupt,
+ IRQF_TRIGGER_RISING,
+ "qcom_rpm_wakeup",
+ rpm);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to request wakeup interrupt\n");
+ return ret;
+ }
+
+ ret = irq_set_irq_wake(irq_wakeup, 1);
+ if (ret)
+ dev_warn(&pdev->dev, "failed to mark wakeup irq as wakeup\n");
+
+ return of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
+}
+
+static int qcom_rpm_remove(struct platform_device *pdev)
+{
+ of_platform_depopulate(&pdev->dev);
+ return 0;
+}
+
+static struct platform_driver qcom_rpm_driver = {
+ .probe = qcom_rpm_probe,
+ .remove = qcom_rpm_remove,
+ .driver = {
+ .name = "qcom_rpm",
+ .of_match_table = qcom_rpm_of_match,
+ },
+};
+
+static int __init qcom_rpm_init(void)
+{
+ return platform_driver_register(&qcom_rpm_driver);
+}
+arch_initcall(qcom_rpm_init);
+
+static void __exit qcom_rpm_exit(void)
+{
+ platform_driver_unregister(&qcom_rpm_driver);
+}
+module_exit(qcom_rpm_exit)
+
+MODULE_DESCRIPTION("Qualcomm Resource Power Manager driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Bjorn Andersson <bjorn.andersson@sonymobile.com>");
diff --git a/include/linux/mfd/qcom_rpm.h b/include/linux/mfd/qcom_rpm.h
new file mode 100644
index 0000000..a60798d
--- /dev/null
+++ b/include/linux/mfd/qcom_rpm.h
@@ -0,0 +1,10 @@
+#ifndef __QCOM_RPM_H__
+#define __QCOM_RPM_H__
+
+#include <linux/types.h>
+
+struct qcom_rpm;
+
+int qcom_rpm_write(struct qcom_rpm *rpm, int resource, u32 *buf, size_t count);
+
+#endif
--
1.7.9.5
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH v6 3/3] regulator: qcom-rpm: Regulator driver for the Qualcomm RPM
2014-08-26 4:58 [PATCH v6 0/3] Qualcomm Resource Power Manager driver Bjorn Andersson
2014-08-26 4:58 ` [PATCH v6 1/3] mfd: devicetree: bindings: Add Qualcomm RPM DT binding Bjorn Andersson
2014-08-26 4:58 ` [PATCH v6 2/3] mfd: qcom-rpm: Driver for the Qualcomm RPM Bjorn Andersson
@ 2014-08-26 4:58 ` Bjorn Andersson
2 siblings, 0 replies; 9+ messages in thread
From: Bjorn Andersson @ 2014-08-26 4:58 UTC (permalink / raw)
To: Mark Brown
Cc: Rob Herring, Lee Jones, Pawel Moll, Andy Gross, Mark Rutland,
Kevin Hilman, Kumar Gala, Josh Cartwright, devicetree,
linux-kernel, linux-arm-kernel, linux-arm-msm
Driver for regulators exposed by the Resource Power Manager (RPM) found
in Qualcomm 8660, 8960 and 8064 based devices.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
---
drivers/regulator/Kconfig | 12 +
drivers/regulator/Makefile | 1 +
drivers/regulator/qcom_rpm-regulator.c | 798 ++++++++++++++++++++++++++++++++
3 files changed, 811 insertions(+)
create mode 100644 drivers/regulator/qcom_rpm-regulator.c
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 2dc8289..0e59754 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -449,6 +449,18 @@ config REGULATOR_PFUZE100
Say y here to support the regulators found on the Freescale
PFUZE100/PFUZE200 PMIC.
+config REGULATOR_QCOM_RPM
+ tristate "Qualcomm RPM regulator driver"
+ depends on MFD_QCOM_RPM
+ help
+ If you say yes to this option, support will be included for the
+ regulators exposed by the Resource Power Manager found in Qualcomm
+ 8660, 8960 and 8064 based devices.
+
+ Say M here if you want to include support for the regulators on the
+ Qualcomm RPM as a module. The module will be named
+ "qcom_rpm-regulator".
+
config REGULATOR_RC5T583
tristate "RICOH RC5T583 Power regulators"
depends on MFD_RC5T583
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index aa4a6aa..9c50dc6 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -55,6 +55,7 @@ obj-$(CONFIG_REGULATOR_MAX77693) += max77693.o
obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
+obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o
obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o
obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o
diff --git a/drivers/regulator/qcom_rpm-regulator.c b/drivers/regulator/qcom_rpm-regulator.c
new file mode 100644
index 0000000..fb9c9a7
--- /dev/null
+++ b/drivers/regulator/qcom_rpm-regulator.c
@@ -0,0 +1,798 @@
+/*
+ * Copyright (c) 2014, Sony Mobile Communications AB.
+ * Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/mfd/qcom_rpm.h>
+
+#include <dt-bindings/mfd/qcom,rpm.h>
+
+#define MAX_REQUEST_LEN 2
+
+struct request_member {
+ int word;
+ unsigned int mask;
+ int shift;
+};
+
+struct rpm_reg_parts {
+ struct request_member mV; /* used if voltage is in mV */
+ struct request_member uV; /* used if voltage is in uV */
+ struct request_member ip; /* peak current in mA */
+ struct request_member pd; /* pull down enable */
+ struct request_member ia; /* average current in mA */
+ struct request_member fm; /* force mode */
+ struct request_member pm; /* power mode */
+ struct request_member pc; /* pin control */
+ struct request_member pf; /* pin function */
+ struct request_member enable_state; /* NCP and switch */
+ struct request_member comp_mode; /* NCP */
+ struct request_member freq; /* frequency: NCP and SMPS */
+ struct request_member freq_clk_src; /* clock source: SMPS */
+ struct request_member hpm; /* switch: control OCP and SS */
+ int request_len;
+};
+
+#define FORCE_MODE_IS_2_BITS(reg) \
+ ((vreg->parts->fm.mask >> vreg->parts->fm.shift) == 3)
+
+struct qcom_rpm_reg {
+ struct qcom_rpm *rpm;
+
+ struct mutex lock;
+ struct device *dev;
+ struct regulator_desc desc;
+ const struct rpm_reg_parts *parts;
+
+ int resource;
+ u32 val[MAX_REQUEST_LEN];
+
+ int uV;
+ int is_enabled;
+
+ bool supports_force_mode_auto;
+ bool supports_force_mode_bypass;
+};
+
+static const struct rpm_reg_parts rpm8660_ldo_parts = {
+ .request_len = 2,
+ .mV = { 0, 0x00000FFF, 0 },
+ .ip = { 0, 0x00FFF000, 12 },
+ .fm = { 0, 0x03000000, 24 },
+ .pc = { 0, 0x3C000000, 26 },
+ .pf = { 0, 0xC0000000, 30 },
+ .pd = { 1, 0x00000001, 0 },
+ .ia = { 1, 0x00001FFE, 1 },
+};
+
+static const struct rpm_reg_parts rpm8660_smps_parts = {
+ .request_len = 2,
+ .mV = { 0, 0x00000FFF, 0 },
+ .ip = { 0, 0x00FFF000, 12 },
+ .fm = { 0, 0x03000000, 24 },
+ .pc = { 0, 0x3C000000, 26 },
+ .pf = { 0, 0xC0000000, 30 },
+ .pd = { 1, 0x00000001, 0 },
+ .ia = { 1, 0x00001FFE, 1 },
+ .freq = { 1, 0x001FE000, 13 },
+ .freq_clk_src = { 1, 0x00600000, 21 },
+};
+
+static const struct rpm_reg_parts rpm8660_switch_parts = {
+ .request_len = 1,
+ .enable_state = { 0, 0x00000001, 0 },
+ .pd = { 0, 0x00000002, 1 },
+ .pc = { 0, 0x0000003C, 2 },
+ .pf = { 0, 0x000000C0, 6 },
+ .hpm = { 0, 0x00000300, 8 },
+};
+
+static const struct rpm_reg_parts rpm8660_ncp_parts = {
+ .request_len = 1,
+ .mV = { 0, 0x00000FFF, 0 },
+ .enable_state = { 0, 0x00001000, 12 },
+ .comp_mode = { 0, 0x00002000, 13 },
+ .freq = { 0, 0x003FC000, 14 },
+};
+
+static const struct rpm_reg_parts rpm8960_ldo_parts = {
+ .request_len = 2,
+ .uV = { 0, 0x007FFFFF, 0 },
+ .pd = { 0, 0x00800000, 23 },
+ .pc = { 0, 0x0F000000, 24 },
+ .pf = { 0, 0xF0000000, 28 },
+ .ip = { 1, 0x000003FF, 0 },
+ .ia = { 1, 0x000FFC00, 10 },
+ .fm = { 1, 0x00700000, 20 },
+};
+
+static const struct rpm_reg_parts rpm8960_smps_parts = {
+ .request_len = 2,
+ .uV = { 0, 0x007FFFFF, 0 },
+ .pd = { 0, 0x00800000, 23 },
+ .pc = { 0, 0x0F000000, 24 },
+ .pf = { 0, 0xF0000000, 28 },
+ .ip = { 1, 0x000003FF, 0 },
+ .ia = { 1, 0x000FFC00, 10 },
+ .fm = { 1, 0x00700000, 20 },
+ .pm = { 1, 0x00800000, 23 },
+ .freq = { 1, 0x1F000000, 24 },
+ .freq_clk_src = { 1, 0x60000000, 29 },
+};
+
+static const struct rpm_reg_parts rpm8960_switch_parts = {
+ .request_len = 1,
+ .enable_state = { 0, 0x00000001, 0 },
+ .pd = { 0, 0x00000002, 1 },
+ .pc = { 0, 0x0000003C, 2 },
+ .pf = { 0, 0x000003C0, 6 },
+ .hpm = { 0, 0x00000C00, 10 },
+};
+
+static const struct rpm_reg_parts rpm8960_ncp_parts = {
+ .request_len = 1,
+ .uV = { 0, 0x007FFFFF, 0 },
+ .enable_state = { 0, 0x00800000, 23 },
+ .comp_mode = { 0, 0x01000000, 24 },
+ .freq = { 0, 0x3E000000, 25 },
+};
+
+/*
+ * Physically available PMIC regulator voltage ranges
+ */
+static const struct regulator_linear_range pldo_ranges[] = {
+ REGULATOR_LINEAR_RANGE( 750000, 0, 59, 12500),
+ REGULATOR_LINEAR_RANGE(1500000, 60, 123, 25000),
+ REGULATOR_LINEAR_RANGE(3100000, 124, 160, 50000),
+};
+
+static const struct regulator_linear_range nldo_ranges[] = {
+ REGULATOR_LINEAR_RANGE( 750000, 0, 63, 12500),
+};
+
+static const struct regulator_linear_range nldo1200_ranges[] = {
+ REGULATOR_LINEAR_RANGE( 375000, 0, 59, 6250),
+ REGULATOR_LINEAR_RANGE( 750000, 60, 123, 12500),
+};
+
+static const struct regulator_linear_range smps_ranges[] = {
+ REGULATOR_LINEAR_RANGE( 375000, 0, 29, 12500),
+ REGULATOR_LINEAR_RANGE( 750000, 30, 89, 12500),
+ REGULATOR_LINEAR_RANGE(1500000, 90, 153, 25000),
+};
+
+static const struct regulator_linear_range ftsmps_ranges[] = {
+ REGULATOR_LINEAR_RANGE( 350000, 0, 6, 50000),
+ REGULATOR_LINEAR_RANGE( 700000, 7, 63, 12500),
+ REGULATOR_LINEAR_RANGE(1500000, 64, 100, 50000),
+};
+
+static const struct regulator_linear_range ncp_ranges[] = {
+ REGULATOR_LINEAR_RANGE(1500000, 0, 31, 50000),
+};
+
+static int rpm_reg_write(struct qcom_rpm_reg *vreg,
+ const struct request_member *req,
+ const int value)
+{
+ if (WARN_ON((value << req->shift) & ~req->mask))
+ return -EINVAL;
+
+ vreg->val[req->word] &= ~req->mask;
+ vreg->val[req->word] |= value << req->shift;
+
+ return qcom_rpm_write(vreg->rpm,
+ vreg->resource,
+ vreg->val,
+ vreg->parts->request_len);
+}
+
+static int rpm_reg_set_mV_sel(struct regulator_dev *rdev,
+ unsigned selector)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->mV;
+ int ret = 0;
+ int uV;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ uV = regulator_list_voltage_linear_range(rdev, selector);
+ if (uV < 0)
+ return uV;
+
+ mutex_lock(&vreg->lock);
+ vreg->uV = uV;
+ if (vreg->is_enabled)
+ ret = rpm_reg_write(vreg, req, vreg->uV / 1000);
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_set_uV_sel(struct regulator_dev *rdev,
+ unsigned selector)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->uV;
+ int ret = 0;
+ int uV;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ uV = regulator_list_voltage_linear_range(rdev, selector);
+ if (uV < 0)
+ return uV;
+
+ mutex_lock(&vreg->lock);
+ vreg->uV = uV;
+ if (vreg->is_enabled)
+ ret = rpm_reg_write(vreg, req, vreg->uV);
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_get_voltage(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+
+ return vreg->uV;
+}
+
+static int rpm_reg_mV_enable(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->mV;
+ int ret;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ mutex_lock(&vreg->lock);
+ ret = rpm_reg_write(vreg, req, vreg->uV / 1000);
+ if (!ret)
+ vreg->is_enabled = 1;
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_uV_enable(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->uV;
+ int ret;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ mutex_lock(&vreg->lock);
+ ret = rpm_reg_write(vreg, req, vreg->uV);
+ if (!ret)
+ vreg->is_enabled = 1;
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_switch_enable(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->enable_state;
+ int ret;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ mutex_lock(&vreg->lock);
+ ret = rpm_reg_write(vreg, req, 1);
+ if (!ret)
+ vreg->is_enabled = 1;
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_mV_disable(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->mV;
+ int ret;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ mutex_lock(&vreg->lock);
+ ret = rpm_reg_write(vreg, req, 0);
+ if (!ret)
+ vreg->is_enabled = 0;
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_uV_disable(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->uV;
+ int ret;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ mutex_lock(&vreg->lock);
+ ret = rpm_reg_write(vreg, req, 0);
+ if (!ret)
+ vreg->is_enabled = 0;
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_switch_disable(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->enable_state;
+ int ret;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ mutex_lock(&vreg->lock);
+ ret = rpm_reg_write(vreg, req, 0);
+ if (!ret)
+ vreg->is_enabled = 0;
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_is_enabled(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+
+ return vreg->is_enabled;
+}
+
+static struct regulator_ops uV_ops = {
+ .list_voltage = regulator_list_voltage_linear_range,
+
+ .set_voltage_sel = rpm_reg_set_uV_sel,
+ .get_voltage = rpm_reg_get_voltage,
+
+ .enable = rpm_reg_uV_enable,
+ .disable = rpm_reg_uV_disable,
+ .is_enabled = rpm_reg_is_enabled,
+};
+
+static struct regulator_ops mV_ops = {
+ .list_voltage = regulator_list_voltage_linear_range,
+
+ .set_voltage_sel = rpm_reg_set_mV_sel,
+ .get_voltage = rpm_reg_get_voltage,
+
+ .enable = rpm_reg_mV_enable,
+ .disable = rpm_reg_mV_disable,
+ .is_enabled = rpm_reg_is_enabled,
+};
+
+static struct regulator_ops switch_ops = {
+ .enable = rpm_reg_switch_enable,
+ .disable = rpm_reg_switch_disable,
+ .is_enabled = rpm_reg_is_enabled,
+};
+
+/*
+ * PM8058 regulators
+ */
+static const struct qcom_rpm_reg pm8058_pldo = {
+ .desc.linear_ranges = pldo_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(pldo_ranges),
+ .desc.n_voltages = 161,
+ .desc.ops = &mV_ops,
+ .parts = &rpm8660_ldo_parts,
+ .supports_force_mode_auto = false,
+ .supports_force_mode_bypass = false,
+};
+
+static const struct qcom_rpm_reg pm8058_nldo = {
+ .desc.linear_ranges = nldo_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(nldo_ranges),
+ .desc.n_voltages = 64,
+ .desc.ops = &mV_ops,
+ .parts = &rpm8660_ldo_parts,
+ .supports_force_mode_auto = false,
+ .supports_force_mode_bypass = false,
+};
+
+static const struct qcom_rpm_reg pm8058_smps = {
+ .desc.linear_ranges = smps_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(smps_ranges),
+ .desc.n_voltages = 154,
+ .desc.ops = &mV_ops,
+ .parts = &rpm8660_smps_parts,
+ .supports_force_mode_auto = false,
+ .supports_force_mode_bypass = false,
+};
+
+static const struct qcom_rpm_reg pm8058_ncp = {
+ .desc.linear_ranges = ncp_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(ncp_ranges),
+ .desc.n_voltages = 32,
+ .desc.ops = &mV_ops,
+ .parts = &rpm8660_ncp_parts,
+};
+
+static const struct qcom_rpm_reg pm8058_switch = {
+ .desc.ops = &switch_ops,
+ .parts = &rpm8660_switch_parts,
+};
+
+/*
+ * PM8901 regulators
+ */
+static const struct qcom_rpm_reg pm8901_pldo = {
+ .desc.linear_ranges = pldo_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(pldo_ranges),
+ .desc.n_voltages = 161,
+ .desc.ops = &mV_ops,
+ .parts = &rpm8660_ldo_parts,
+ .supports_force_mode_auto = false,
+ .supports_force_mode_bypass = true,
+};
+
+static const struct qcom_rpm_reg pm8901_nldo = {
+ .desc.linear_ranges = nldo_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(nldo_ranges),
+ .desc.n_voltages = 64,
+ .desc.ops = &mV_ops,
+ .parts = &rpm8660_ldo_parts,
+ .supports_force_mode_auto = false,
+ .supports_force_mode_bypass = true,
+};
+
+static const struct qcom_rpm_reg pm8901_ftsmps = {
+ .desc.linear_ranges = ftsmps_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(ftsmps_ranges),
+ .desc.n_voltages = 101,
+ .desc.ops = &mV_ops,
+ .parts = &rpm8660_smps_parts,
+ .supports_force_mode_auto = true,
+ .supports_force_mode_bypass = false,
+};
+
+static const struct qcom_rpm_reg pm8901_switch = {
+ .desc.ops = &switch_ops,
+ .parts = &rpm8660_switch_parts,
+};
+
+/*
+ * PM8921 regulators
+ */
+static const struct qcom_rpm_reg pm8921_pldo = {
+ .desc.linear_ranges = pldo_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(pldo_ranges),
+ .desc.n_voltages = 161,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_ldo_parts,
+ .supports_force_mode_auto = false,
+ .supports_force_mode_bypass = true,
+};
+
+static const struct qcom_rpm_reg pm8921_nldo = {
+ .desc.linear_ranges = nldo_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(nldo_ranges),
+ .desc.n_voltages = 64,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_ldo_parts,
+ .supports_force_mode_auto = false,
+ .supports_force_mode_bypass = true,
+};
+
+static const struct qcom_rpm_reg pm8921_nldo1200 = {
+ .desc.linear_ranges = nldo1200_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(nldo1200_ranges),
+ .desc.n_voltages = 124,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_ldo_parts,
+ .supports_force_mode_auto = false,
+ .supports_force_mode_bypass = true,
+};
+
+static const struct qcom_rpm_reg pm8921_smps = {
+ .desc.linear_ranges = smps_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(smps_ranges),
+ .desc.n_voltages = 154,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_smps_parts,
+ .supports_force_mode_auto = true,
+ .supports_force_mode_bypass = false,
+};
+
+static const struct qcom_rpm_reg pm8921_ftsmps = {
+ .desc.linear_ranges = ftsmps_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(ftsmps_ranges),
+ .desc.n_voltages = 101,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_smps_parts,
+ .supports_force_mode_auto = true,
+ .supports_force_mode_bypass = false,
+};
+
+static const struct qcom_rpm_reg pm8921_ncp = {
+ .desc.linear_ranges = ncp_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(ncp_ranges),
+ .desc.n_voltages = 32,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_ncp_parts,
+};
+
+static const struct qcom_rpm_reg pm8921_switch = {
+ .desc.ops = &switch_ops,
+ .parts = &rpm8960_switch_parts,
+};
+
+static const struct of_device_id rpm_of_match[] = {
+ { .compatible = "qcom,rpm-pm8058-pldo", .data = &pm8058_pldo },
+ { .compatible = "qcom,rpm-pm8058-nldo", .data = &pm8058_nldo },
+ { .compatible = "qcom,rpm-pm8058-smps", .data = &pm8058_smps },
+ { .compatible = "qcom,rpm-pm8058-ncp", .data = &pm8058_ncp },
+ { .compatible = "qcom,rpm-pm8058-switch", .data = &pm8058_switch },
+
+ { .compatible = "qcom,rpm-pm8901-pldo", .data = &pm8901_pldo },
+ { .compatible = "qcom,rpm-pm8901-nldo", .data = &pm8901_nldo },
+ { .compatible = "qcom,rpm-pm8901-ftsmps", .data = &pm8901_ftsmps },
+ { .compatible = "qcom,rpm-pm8901-switch", .data = &pm8901_switch },
+
+ { .compatible = "qcom,rpm-pm8921-pldo", .data = &pm8921_pldo },
+ { .compatible = "qcom,rpm-pm8921-nldo", .data = &pm8921_nldo },
+ { .compatible = "qcom,rpm-pm8921-nldo1200", .data = &pm8921_nldo1200 },
+ { .compatible = "qcom,rpm-pm8921-smps", .data = &pm8921_smps },
+ { .compatible = "qcom,rpm-pm8921-ftsmps", .data = &pm8921_ftsmps },
+ { .compatible = "qcom,rpm-pm8921-ncp", .data = &pm8921_ncp },
+ { .compatible = "qcom,rpm-pm8921-switch", .data = &pm8921_switch },
+ { }
+};
+MODULE_DEVICE_TABLE(of, rpm_of_match);
+
+static int rpm_reg_set(struct qcom_rpm_reg *vreg,
+ const struct request_member *req,
+ const int value)
+{
+ if (req->mask == 0 || (value << req->shift) & ~req->mask)
+ return -EINVAL;
+
+ vreg->val[req->word] &= ~req->mask;
+ vreg->val[req->word] |= value << req->shift;
+
+ return 0;
+}
+
+static int rpm_reg_of_parse_freq(struct device *dev, struct qcom_rpm_reg *vreg)
+{
+ static const int freq_table[] = {
+ 19200000, 9600000, 6400000, 4800000, 3840000, 3200000, 2740000,
+ 2400000, 2130000, 1920000, 1750000, 1600000, 1480000, 1370000,
+ 1280000, 1200000,
+
+ };
+ const char *key;
+ u32 freq;
+ int ret;
+ int i;
+
+ key = "qcom,switch-mode-frequency";
+ ret = of_property_read_u32(dev->of_node, key, &freq);
+ if (ret) {
+ dev_err(dev, "regulator requires %s property\n", key);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(freq_table); i++) {
+ if (freq == freq_table[i]) {
+ rpm_reg_set(vreg, &vreg->parts->freq, i + 1);
+ return 0;
+ }
+ }
+
+ dev_err(dev, "invalid frequency %d\n", freq);
+ return -EINVAL;
+}
+
+static int rpm_reg_probe(struct platform_device *pdev)
+{
+ struct regulator_init_data *initdata;
+ const struct qcom_rpm_reg *template;
+ const struct of_device_id *match;
+ struct regulator_config config = { 0 };
+ struct regulator_dev *rdev;
+ struct qcom_rpm_reg *vreg;
+ const char *key;
+ u32 force_mode;
+ bool pwm;
+ u32 val;
+ int ret;
+
+ match = of_match_device(rpm_of_match, &pdev->dev);
+ template = match->data;
+
+ initdata = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node);
+ if (!initdata)
+ return -EINVAL;
+
+ vreg = devm_kmalloc(&pdev->dev, sizeof(*vreg), GFP_KERNEL);
+ if (!vreg) {
+ dev_err(&pdev->dev, "failed to allocate vreg\n");
+ return -ENOMEM;
+ }
+ memcpy(vreg, template, sizeof(*vreg));
+ mutex_init(&vreg->lock);
+ vreg->dev = &pdev->dev;
+ vreg->desc.id = -1;
+ vreg->desc.owner = THIS_MODULE;
+ vreg->desc.type = REGULATOR_VOLTAGE;
+ vreg->desc.name = pdev->dev.of_node->name;
+
+ vreg->rpm = dev_get_drvdata(pdev->dev.parent);
+ if (!vreg->rpm) {
+ dev_err(&pdev->dev, "unable to retrieve handle to rpm\n");
+ return -ENODEV;
+ }
+
+ key = "reg";
+ ret = of_property_read_u32(pdev->dev.of_node, key, &val);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to read %s\n", key);
+ return ret;
+ }
+ vreg->resource = val;
+
+ if ((vreg->parts->uV.mask || vreg->parts->mV.mask) &&
+ (!initdata->constraints.min_uV || !initdata->constraints.max_uV)) {
+ dev_err(&pdev->dev, "no voltage specified for regulator\n");
+ return -EINVAL;
+ }
+
+ key = "bias-pull-down";
+ if (of_property_read_bool(pdev->dev.of_node, key)) {
+ ret = rpm_reg_set(vreg, &vreg->parts->pd, 1);
+ if (ret) {
+ dev_err(&pdev->dev, "%s is invalid", key);
+ return ret;
+ }
+ }
+
+ if (vreg->parts->freq.mask) {
+ ret = rpm_reg_of_parse_freq(&pdev->dev, vreg);
+ if (ret < 0)
+ return ret;
+ }
+
+ if (vreg->parts->pm.mask) {
+ key = "qcom,power-mode-hysteretic";
+ pwm = !of_property_read_bool(pdev->dev.of_node, key);
+
+ ret = rpm_reg_set(vreg, &vreg->parts->pm, pwm);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to set power mode\n");
+ return ret;
+ }
+ }
+
+ if (vreg->parts->fm.mask) {
+ force_mode = -1;
+
+ key = "qcom,force-mode";
+ ret = of_property_read_u32(pdev->dev.of_node, key, &val);
+ if (ret == -EINVAL) {
+ val = QCOM_RPM_FORCE_MODE_NONE;
+ } else if (ret < 0) {
+ dev_err(&pdev->dev, "failed to read %s\n", key);
+ return ret;
+ }
+
+ /*
+ * If force-mode is encoded as 2 bits then the
+ * possible register values are:
+ * NONE, LPM, HPM
+ * otherwise:
+ * NONE, LPM, AUTO, HPM, BYPASS
+ */
+ switch (val) {
+ case QCOM_RPM_FORCE_MODE_NONE:
+ force_mode = 0;
+ break;
+ case QCOM_RPM_FORCE_MODE_LPM:
+ force_mode = 1;
+ break;
+ case QCOM_RPM_FORCE_MODE_HPM:
+ if (FORCE_MODE_IS_2_BITS(vreg))
+ force_mode = 2;
+ else
+ force_mode = 3;
+ break;
+ case QCOM_RPM_FORCE_MODE_AUTO:
+ if (vreg->supports_force_mode_auto)
+ force_mode = 2;
+ break;
+ case QCOM_RPM_FORCE_MODE_BYPASS:
+ if (vreg->supports_force_mode_bypass)
+ force_mode = 4;
+ break;
+ }
+
+ if (force_mode < 0) {
+ dev_err(&pdev->dev, "invalid force mode\n");
+ return -EINVAL;
+ }
+
+ ret = rpm_reg_set(vreg, &vreg->parts->fm, force_mode);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to set force mode\n");
+ return ret;
+ }
+ }
+
+ config.dev = &pdev->dev;
+ config.init_data = initdata;
+ config.driver_data = vreg;
+ config.of_node = pdev->dev.of_node;
+ rdev = devm_regulator_register(&pdev->dev, &vreg->desc, &config);
+ if (IS_ERR(rdev)) {
+ dev_err(&pdev->dev, "can't register regulator\n");
+ return PTR_ERR(rdev);
+ }
+
+ return 0;
+}
+
+static struct platform_driver rpm_reg_driver = {
+ .probe = rpm_reg_probe,
+ .driver = {
+ .name = "qcom_rpm_reg",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(rpm_of_match),
+ },
+};
+
+static int __init rpm_reg_init(void)
+{
+ return platform_driver_register(&rpm_reg_driver);
+}
+subsys_initcall(rpm_reg_init);
+
+static void __exit rpm_reg_exit(void)
+{
+ platform_driver_unregister(&rpm_reg_driver);
+}
+module_exit(rpm_reg_exit)
+
+MODULE_DESCRIPTION("Qualcomm RPM regulator driver");
+MODULE_LICENSE("GPL v2");
--
1.7.9.5
^ permalink raw reply related [flat|nested] 9+ messages in thread