From mboxrd@z Thu Jan 1 00:00:00 1970 From: Boris BREZILLON Subject: Re: [PATCH v4 9/9] mfd: syscon: add Atmel GPBR DT bindings documention Date: Wed, 17 Sep 2014 19:57:27 +0200 Message-ID: <20140917195727.1c75a062@bbrezillon> References: <1410441525-25258-1-git-send-email-boris.brezillon@free-electrons.com> <1410441525-25258-10-git-send-email-boris.brezillon@free-electrons.com> <20140917163405.GM30918@lee--X1> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20140917163405.GM30918@lee--X1> Sender: linux-kernel-owner@vger.kernel.org To: Lee Jones Cc: Nicolas Ferre , Jean-Christophe Plagniol-Villard , Alexandre Belloni , Andrew Victor , Alessandro Zummo , rtc-linux@googlegroups.com, Johan Hovold , Mark Rutland , devicetree@vger.kernel.org, Pawel Moll , Ian Campbell , linux-kernel@vger.kernel.org, Rob Herring , Kumar Gala , linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org Hi Lee, On Wed, 17 Sep 2014 09:34:05 -0700 Lee Jones wrote: > On Thu, 11 Sep 2014, Boris BREZILLON wrote: > > > The GPBR block provides a set of battery-backed registers that can be used > > to save data which need to be kept when the system is powered down and > > VDD-core is maintained by an external battery. > > > > A typical usage is the RTT block (when used as an RTC) which needs one of > > those registers to save the current time. > > > > Signed-off-by: Boris BREZILLON > > --- > > Documentation/devicetree/bindings/mfd/atmel,gpbr.txt | 15 +++++++++++++++ > > 1 file changed, 15 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/mfd/atmel,gpbr.txt > > > > diff --git a/Documentation/devicetree/bindings/mfd/atmel,gpbr.txt b/Documentation/devicetree/bindings/mfd/atmel,gpbr.txt > > new file mode 100644 > > index 0000000..a285695 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/mfd/atmel,gpbr.txt > > @@ -0,0 +1,15 @@ > > +* Device tree bindings for Atmel GPBR (General Purpose Backup Registers) > > + > > +The GPBR are a set of battery-backed registers. > > + > > +Required properties: > > +- compatible: "atmel,at91sam9260-gpbr", "syscon" > > +- reg: contains offset/length value of the GPBR memory > > + region. > > + > > +Example: > > + > > +gpbr: gpbr@fffffd50 { > > Is something referencing this node via phandle? If not, please remove > the label. Yes, the rtt device is referencing it in its atmel,rtt-rtc-time-reg property (see patch 8 of this series). Best Regards, Boris -- Boris Brezillon, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com