From: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
To: Alexander Shiyan <shc_work-JGs/UdohzUI@public.gmane.org>
Cc: "linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
"devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Subject: Re: [PATCH 3/3] spi: clps711x: dts: Add bindings documentation for the CLPS711X SPI driver
Date: Mon, 22 Sep 2014 19:08:52 +0100 [thread overview]
Message-ID: <20140922180852.GA23666@leverpostej> (raw)
In-Reply-To: <1411196736-5019-1-git-send-email-shc_work-JGs/UdohzUI@public.gmane.org>
On Sat, Sep 20, 2014 at 08:05:36AM +0100, Alexander Shiyan wrote:
> This patch adds the devicetree documentation for the
> Cirrus Logic CLPS711X SPI driver.
>
> Signed-off-by: Alexander Shiyan <shc_work-JGs/UdohzUI@public.gmane.org>
> ---
> .../devicetree/bindings/spi/spi-clps711x.txt | 20 ++++++++++++++++++++
> 1 file changed, 20 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/spi/spi-clps711x.txt
>
> diff --git a/Documentation/devicetree/bindings/spi/spi-clps711x.txt b/Documentation/devicetree/bindings/spi/spi-clps711x.txt
> new file mode 100644
> index 0000000..43712c0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/spi/spi-clps711x.txt
> @@ -0,0 +1,20 @@
> +* Cirrus Logic ARM CLPS711X Serial Peripheral Interface (SPI)
> +
> +Required properties:
> +- compatible: Shall contain "cirrus,clps711x-spi".
Is there a specific "clps11x" device, or is that 'x' a wildcard?
Please don't use wildcards in bindings. Choose a particular device as
the fallback string to use.
> +- reg: Offset and length of the register set for the device.
> +- interrupts: Should contain SPI interrupt.
> +- clocks: phandle to SPI reference clock.
> +- cs-gpios: Specifies the GPIO pins to be used for chipselects.
> +
> +Example:
> + spi: spi@80000500 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "cirrus,ep7312-spi", "cirrus,clps711x-spi";
Which other strings are compatible?
Thanks,
Mark.
> + reg = <0x80000500 0x4>;
> + interrupts = <15>;
> + clocks = <&clks CLPS711X_CLK_SPIREF>;
> + cs-gpios = <&portb 4 GPIO_ACTIVE_LOW>,
> + <&portb 5 GPIO_ACTIVE_LOW>;
> + };
> --
> 1.8.5.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2014-09-22 18:08 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-20 7:05 [PATCH 3/3] spi: clps711x: dts: Add bindings documentation for the CLPS711X SPI driver Alexander Shiyan
[not found] ` <1411196736-5019-1-git-send-email-shc_work-JGs/UdohzUI@public.gmane.org>
2014-09-22 18:08 ` Mark Rutland [this message]
2014-09-23 16:49 ` Alexander Shiyan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140922180852.GA23666@leverpostej \
--to=mark.rutland-5wv7dgnigg8@public.gmane.org \
--cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=shc_work-JGs/UdohzUI@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).