From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lee Jones Subject: Re: [PATCH v2 2/2] dt: bindings: tps65217: add compatible property for subnodes Date: Wed, 8 Oct 2014 14:30:28 +0100 Message-ID: <20141008133028.GI20647@lee--X1> References: <1660410.j399mvljTo@lenovobook> <20141006212232.GF18035@lee--X1> <20141008104717.GG20647@lee--X1> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Content-Disposition: inline In-Reply-To: Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Johannes Pointner Cc: Samuel Ortiz , Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: devicetree@vger.kernel.org On Wed, 08 Oct 2014, Johannes Pointner wrote: > 2014-10-08 12:47 GMT+02:00 Lee Jones : > > On Wed, 08 Oct 2014, Johannes Pointner wrote: > > > >> 2014-10-06 23:22 GMT+02:00 Lee Jones : > >> > On Thu, 25 Sep 2014, Johannes Pointner wrote: > >> > > >> >> Add documentation for compatible property of subnodes. > >> >> > >> >> Signed-off-by: Johannes Pointner > >> >> --- > >> >> Documentation/devicetree/bindings/regulator/tps65217.txt = | 7 ++++++- > >> >> .../devicetree/bindings/video/backlight/tps65217-backlight.txt= | 9 ++++++--- > >> >> 2 files changed, 12 insertions(+), 4 deletions(-) > >> >> > >> >> diff --git a/Documentation/devicetree/bindings/regulator/tps652= 17.txt b/Documentation/devicetree/bindings/regulator/tps65217.txt > >> >> index 4f05d20..8ae3a3b 100644 > >> >> --- a/Documentation/devicetree/bindings/regulator/tps65217.txt > >> >> +++ b/Documentation/devicetree/bindings/regulator/tps65217.txt > >> >> @@ -14,6 +14,9 @@ Required properties: > >> >> Optional properties: > >> >> - ti,pmic-shutdown-controller: Telling the PMIC to shutdown on= PWR_EN toggle. > >> >> > >> >> +Required subnode properties: > >> >> +- compatible: "ti,tps65217-pmic" > >> >> + > >> >> The valid names for regulators are: > >> >> tps65217: dcdc1, dcdc2, dcdc3, ldo1, ldo2, ldo3 and ldo4 > >> >> > >> >> @@ -23,9 +26,11 @@ Example: > >> >> > >> >> tps: tps@24 { > >> >> compatible =3D "ti,tps65217"; > >> >> + reg =3D <0x24>; > >> >> ti,pmic-shutdown-controller; > >> >> > >> >> - regulators { > >> >> + tps_pmic: regulators { > >> > > >> > How is the tps_pmic label used? > >> > > >> >> + compatible =3D "ti,tps65217-pmic"; > >> > > >> > I'd like to see a '\n' here. > >> I will add a newline here. > >> > > >> >> dcdc1_reg: dcdc1 { > >> >> regulator-min-microvolt =3D <9000= 00>; > >> >> regulator-max-microvolt =3D <1800= 000>; > >> >> diff --git a/Documentation/devicetree/bindings/video/backlight/= tps65217-backlight.txt b/Documentation/devicetree/bindings/video/backli= ght/tps65217-backlight.txt > >> >> index 5fb9279..f92f154 100644 > >> >> --- a/Documentation/devicetree/bindings/video/backlight/tps6521= 7-backlight.txt > >> >> +++ b/Documentation/devicetree/bindings/video/backlight/tps6521= 7-backlight.txt > >> >> @@ -6,19 +6,22 @@ used to drive LEDs for use as backlights. > >> >> Required properties: > >> >> - compatible: "ti,tps65217" > >> >> - reg: I2C slave address > >> >> -- backlight: node for specifying WLED1 and WLED2 lines in TPS6= 5217 > >> >> +- backlight: subnode for specifying WLED1 and WLED2 lines in T= PS65217 > >> >> + > >> >> +Required subnode properties: > >> >> +- compatible: "ti,tps65217-bl" > >> >> - isel: selection bit, valid values: 1 for ISEL1 (low-level) a= nd 2 for ISEL2 (high-level) > >> >> - fdim: PWM dimming frequency, valid values: 100, 200, 500, 10= 00 > >> >> - default-brightness: valid values: 0-100 > >> >> > >> >> -Each regulator is defined using the standard binding for regul= ators. > >> >> > >> >> Example: > >> >> > >> >> tps: tps@24 { > >> >> reg =3D <0x24>; > >> >> compatible =3D "ti,tps65217"; > >> > > >> > I'd like to see a '\n' here. > >> I will add a newline here. > >> > > >> >> - backlight { > >> >> + tps_bl: backlight { > >> > > >> > Same here. Is this label used? > >> > > >> >> + compatible =3D "ti,tps65217-bl"; > >> >> isel =3D <1>; /* 1 - ISET1, 2 ISET2 */ > >> >> fdim =3D <100>; /* TPS65217_BL_FDIM_100HZ= */ > >> >> default-brightness =3D <50>; > >> > > >> > >> Regarding the labels: The backlight label could be used like the > >> following. I use it like this in my tests with the tilcdc panel dr= iver > >> which has a backlight support. > >> > >> panel { > >> backlight =3D <&tps_bl>; > >> > >> panel-info { > >> ac-bias =3D <255>; > >> ac-bias-intrpt =3D <0>; > >> dma-burst-sz =3D <16>; > >> bpp =3D <32>; > >> fdd =3D <0x80>; > >> sync-edge =3D <0>; > >> sync-ctrl =3D <1>; > >> . > >> . > >> . > >> > >> I'm not sure if there could be actual use for the pmic label, but = I > >> thought if I add a label to backlight, I have to add one to the pm= ic > >> too to keep it similar. > > > > No, not at all. If it's not used, you should remove it. >=20 > OK, my mistake, sorry. > I'll remove the pmic part of the patch and add the newline to the > backlight documentation and resend the patch, if this is OK for you? Yes, fine. --=20 Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org =E2=94=82 Open source software for ARM SoCs =46ollow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe devicetree" i= n the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html