From mboxrd@z Thu Jan 1 00:00:00 1970 From: Guenter Roeck Subject: Re: [PATCH v6 1/4] hwmon: ltc2978: device tree bindings documentation Date: Thu, 16 Oct 2014 12:46:07 -0700 Message-ID: <20141016194607.GA23042@roeck-us.net> References: <1413399310-19277-1-git-send-email-atull@opensource.altera.com> <1413399310-19277-2-git-send-email-atull@opensource.altera.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <1413399310-19277-2-git-send-email-atull@opensource.altera.com> Sender: linux-kernel-owner@vger.kernel.org To: atull@opensource.altera.com Cc: jdelvare@suse.de, lm-sensors@lm-sensors.org, lgirdwood@gmail.com, broonie@kernel.org, robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com, ijc+devicetree@hellion.org.uk, galak@codeaurora.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, delicious.quinoa@gmail.com, dinguyen@opensource.altera.com, yvanderv@opensource.altera.com List-Id: devicetree@vger.kernel.org On Wed, Oct 15, 2014 at 01:55:07PM -0500, atull@opensource.altera.com wrote: > From: Alan Tull > > Add device tree bindings documentation for ltc2978. > > Signed-off-by: Alan Tull > Cc: Guenter Roeck > Cc: Mark Rutland > Cc: Mark Brown > --- > v2: clean whitespace > > v3: list compatible strings in single column > add vendor as lltc > mention regulators.txt instead of documenting regulator-name > s/vout_en/vout/ > remove size_cells, address-cells > use node name to identify regulators > --- > .../devicetree/bindings/hwmon/ltc2978.txt | 39 ++++++++++++++++++++ > 1 file changed, 39 insertions(+) > create mode 100644 Documentation/devicetree/bindings/hwmon/ltc2978.txt > > diff --git a/Documentation/devicetree/bindings/hwmon/ltc2978.txt b/Documentation/devicetree/bindings/hwmon/ltc2978.txt > new file mode 100644 > index 0000000..16c1227 > --- /dev/null > +++ b/Documentation/devicetree/bindings/hwmon/ltc2978.txt > @@ -0,0 +1,39 @@ > +ltc2978 > + > +Required properties: > +- compatible: should contain one of: > + * "lltc,ltc2974" > + * "lltc,ltc2977" > + * "lltc,ltc2978" > + * "lltc,ltc3880" > + * "lltc,ltc3883" > + * "lltc,ltm4676" > +- reg: I2C slave address > + > +Optional properties: > +- regulators: A node that houses a sub-node for each regulator controlled by > + the device. Each sub-node is identified using the node's name, with valid > + values listed below. The content of each sub-node is defined by the > + standard binding for regulators; see regulator.txt. > + > +Valid names of regulators depend on number of supplies supported per device: > + * ltc2974 : vout0 - vout3 > + * ltc2977 : vout0 - vout7 > + * ltc2978 : vout0 - vout7 > + * ltc3880 : vout0 - vout1 > + * ltc3883 : vout0 > + * ltm4676 : vout0 - vout1 > + > +Example: > +ltc2978@5e { > + compatible = "ltc2978"; Nitpick, but still: "lltc,ltc2978" > + reg = <0x5e>; > + regulators { > + vout0 { > + regulator-name = "FPGA-2.5V"; > + }; > + vout2 { > + regulator-name = "FPGA-1.5V"; > + }; > + }; > +}; > -- > 1.7.9.5 >