devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: Caesar Wang <caesar.wang@rock-chips.com>
Cc: heiko@sntech.de, rui.zhang@intel.com, edubezval@gmail.com,
	zyf@rock-chips.com, dianders@chromium.org,
	linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
	linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	devicetree@vger.kernel.org, linux-doc@vger.kernel.org,
	cf@rock-chips.com, dbasehore@chromium.org,
	huangtao@rock-chips.com, cjf@rock-chips.com,
	zhengsq@rock-chips.com
Subject: Re: [PATCH v14 4/5] ARM: dts: add main Thermal info to rk3288
Date: Mon, 27 Oct 2014 17:25:55 -0700	[thread overview]
Message-ID: <20141028002555.GH7594@dtor-ws> (raw)
In-Reply-To: <1414377588-2237-5-git-send-email-caesar.wang@rock-chips.com>

On Mon, Oct 27, 2014 at 10:39:47AM +0800, Caesar Wang wrote:
> This patch is depend on rk3288-thermal.dtsi,or
> it will compile error.
> 
> If for some reason we are unable to shut it down
> in orderly fashion (kernel is stuck holding a lock or
> similar), then hardware TSHUT will reset it.
> 
> If the temperature over a period of time High,over 125C
> the resulting TSHUT gave CRU module,let it reset
> the entire chip,or via GPIO give PMIC.
> 
> Signed-off-by: Caesar Wang <caesar.wang@rock-chips.com>

Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

> ---
>  arch/arm/boot/dts/rk3288.dtsi | 25 +++++++++++++++++++++++++
>  1 file changed, 25 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
> index cb18bb4..85855a6 100644
> --- a/arch/arm/boot/dts/rk3288.dtsi
> +++ b/arch/arm/boot/dts/rk3288.dtsi
> @@ -15,6 +15,7 @@
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>  #include <dt-bindings/pinctrl/rockchip.h>
>  #include <dt-bindings/clock/rk3288-cru.h>
> +#include <dt-bindings/thermal/thermal.h>
>  #include "skeleton.dtsi"
>  
>  / {
> @@ -66,6 +67,7 @@
>  				 216000  900000
>  				 126000  900000
>  			>;
> +			#cooling-cells = <2>; /* min followed by max */
>  			clock-latency = <40000>;
>  			clocks = <&cru ARMCLK>;
>  		};
> @@ -346,6 +348,23 @@
>  		status = "disabled";
>  	};
>  
> +	thermal-zones {
> +		#include "rk3288-thermal.dtsi"
> +	};
> +
> +	tsadc: tsadc@ff280000 {
> +		compatible = "rockchip,rk3288-tsadc";
> +		reg = <0xff280000 0x100>;
> +		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
> +		clock-names = "tsadc", "apb_pclk";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&otp_out>;
> +		#thermal-sensor-cells = <1>;
> +		hw-shut-temp = <125000>;
> +		status = "disabled";
> +	};
> +
>  	usb_host0_ehci: usb@ff500000 {
>  		compatible = "generic-ehci";
>  		reg = <0xff500000 0x100>;
> @@ -965,6 +984,12 @@
>  			};
>  		};
>  
> +		tsadc {
> +			otp_out: otp-out {
> +				rockchip,pins = <0 10 RK_FUNC_1 &pcfg_pull_none>;
> +			};
> +		};
> +
>  		pwm0 {
>  			pwm0_pin: pwm0-pin {
>  				rockchip,pins = <7 0 RK_FUNC_1 &pcfg_pull_none>;
> -- 
> 1.9.1
> 
> 

-- 
Dmitry

  reply	other threads:[~2014-10-28  0:25 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-10-27  2:39 [PATCH v14 0/5] Rockchip soc thermal driver Caesar Wang
2014-10-27  2:39 ` [PATCH v14 1/5] thermal: rockchip: add driver for thermal Caesar Wang
2014-10-28  0:32   ` Dmitry Torokhov
2014-10-28  3:36     ` Caesar Wang
2014-10-27  2:39 ` [PATCH v14 2/5] dt-bindings: document Rockchip thermal Caesar Wang
2014-10-28  0:29   ` Dmitry Torokhov
2014-10-28  0:32     ` Caesar Wang
2014-10-28  0:37       ` Dmitry Torokhov
2014-10-27  2:39 ` [PATCH v14 3/5] ARM: dts: add RK3288 Thermal data Caesar Wang
2014-10-28  0:25   ` Dmitry Torokhov
2014-10-27  2:39 ` [PATCH v14 4/5] ARM: dts: add main Thermal info to rk3288 Caesar Wang
2014-10-28  0:25   ` Dmitry Torokhov [this message]
2014-10-27  2:39 ` [PATCH v14 5/5] ARM: dts: enable Thermal on rk3288-evb board Caesar Wang
2014-10-28  0:26   ` Dmitry Torokhov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20141028002555.GH7594@dtor-ws \
    --to=dmitry.torokhov@gmail.com \
    --cc=caesar.wang@rock-chips.com \
    --cc=cf@rock-chips.com \
    --cc=cjf@rock-chips.com \
    --cc=dbasehore@chromium.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dianders@chromium.org \
    --cc=edubezval@gmail.com \
    --cc=heiko@sntech.de \
    --cc=huangtao@rock-chips.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=rui.zhang@intel.com \
    --cc=zhengsq@rock-chips.com \
    --cc=zyf@rock-chips.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).