* [PATCH v5 0/3] Add Phytec pbab01 audio support
@ 2014-10-29 13:47 Dmitry Lavnikevich
2014-10-29 13:47 ` [PATCH v5 2/3] ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards Dmitry Lavnikevich
` (2 more replies)
0 siblings, 3 replies; 7+ messages in thread
From: Dmitry Lavnikevich @ 2014-10-29 13:47 UTC (permalink / raw)
To: shawn.guo, kernel, robh+dt, pawel.moll, mark.rutland,
ijc+devicetree, galak, linux, lgirdwood, broonie, perex, tiwai
Cc: linux-kernel, linux-arm-kernel, devicetree, alsa-devel
By mistake previous patchset versions was sent as in-reply-to to
previous patchset versions, so they may have been lost among other
mails.
One of pathces was already applied by Mark Brown, here is 3 patches
implementing audio support on Phytec phyFLEX-i.MX6 boards.
This patchset version only renames audio card name to
OnboardTLV320AIC3007 (on request from Phytec).
Patches are based on branch for-next of
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git
^ permalink raw reply [flat|nested] 7+ messages in thread* [PATCH v5 2/3] ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards 2014-10-29 13:47 [PATCH v5 0/3] Add Phytec pbab01 audio support Dmitry Lavnikevich @ 2014-10-29 13:47 ` Dmitry Lavnikevich 2014-11-03 6:14 ` Shawn Guo 2014-10-29 13:47 ` [PATCH v5 3/3] ARM: imx_v6_v7_defconfig: enable tlv320aic3x audio codec by default Dmitry Lavnikevich [not found] ` <1414590424-25585-1-git-send-email-d.lavnikevich-H6HfJ9slvY0Aspv4Qr0y0gC/G2K4zDHf@public.gmane.org> 2 siblings, 1 reply; 7+ messages in thread From: Dmitry Lavnikevich @ 2014-10-29 13:47 UTC (permalink / raw) To: shawn.guo, kernel, robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, linux, lgirdwood, broonie, perex, tiwai Cc: linux-kernel, linux-arm-kernel, devicetree, alsa-devel, Dmitry Lavnikevich Audio on phyFLEX boards is presented by tlv320aic3007 codec connected over SSI interface. Signed-off-by: Dmitry Lavnikevich <d.lavnikevich@sam-solutions.com> --- arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi | 100 ++++++++++++++++++++++++++- arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 15 ++++ 2 files changed, 113 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi index f1bdcae5b97d..cb8f1b6ec083 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi @@ -9,10 +9,73 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include <dt-bindings/sound/fsl-imx-audmux.h> + / { chosen { linux,stdout-path = &uart4; }; + + regulators { + sound_1v8: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "i2s-audio-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + sound_3v3: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "i2s-audio-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + }; + + tlv320_mclk: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + clock-output-names = "tlv320-mclk"; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "OnboardTLV320AIC3007"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink_master>; + simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Line", "Line In", + "Line", "Line Out", + "Speaker", "Speaker", + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "Line Out", "LLOUT", + "Line Out", "RLOUT", + "Speaker", "SPOP", + "Speaker", "SPOM", + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "MIC3L", "Mic Jack", + "MIC3R", "Mic Jack", + "Mic Jack", "Mic Bias", + "LINE1L", "Line In", + "LINE1R", "Line In"; + + simple-audio-card,cpu { + sound-dai = <&ssi2>; + }; + + dailink_master: simple-audio-card,codec { + sound-dai = <&codec>; + clocks = <&tlv320_mclk>; + }; + }; + }; &fec { @@ -27,12 +90,45 @@ status = "okay"; }; +&ssi2 { + status = "okay"; +}; + +&audmux { + status = "okay"; + + ssi2 { + fsl,audmux-port = <1>; + fsl,port-config = < + (IMX_AUDMUX_V2_PTCR_TFSDIR | + IMX_AUDMUX_V2_PTCR_TFSEL(4) | + IMX_AUDMUX_V2_PTCR_TCLKDIR | + IMX_AUDMUX_V2_PTCR_TCSEL(4)) + IMX_AUDMUX_V2_PDCR_RXDSEL(4) + >; + }; + pins5 { + fsl,audmux-port = <4>; + fsl,port-config = < + 0x00000000 + IMX_AUDMUX_V2_PDCR_RXDSEL(1) + >; + }; +}; + &i2c2 { status = "okay"; - tlv320@18 { - compatible = "ti,tlv320aic3x"; + codec: tlv320@18 { + compatible = "ti,tlv320aic3007"; + #sound-dai-cells = <0>; reg = <0x18>; + ai3x-micbias-vg = <2>; + + AVDD-supply = <&sound_3v3>; + IOVDD-supply = <&sound_3v3>; + DRVDD-supply = <&sound_3v3>; + DVDD-supply = <&sound_1v8>; }; stmpe@41 { diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index aa2275671d2c..d7f34664e008 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -58,6 +58,12 @@ }; }; +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "disabled"; +}; + &ecspi3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3>; @@ -319,6 +325,15 @@ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 >; }; + + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT16__AUD5_TXC 0x130b0 + MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS 0x130b0 + MX6QDL_PAD_DISP0_DAT17__AUD5_TXD 0x110b0 + MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0 + >; + }; }; }; -- 2.1.2 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH v5 2/3] ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards 2014-10-29 13:47 ` [PATCH v5 2/3] ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards Dmitry Lavnikevich @ 2014-11-03 6:14 ` Shawn Guo 2014-11-04 11:40 ` Dmitry Lavnikevich 0 siblings, 1 reply; 7+ messages in thread From: Shawn Guo @ 2014-11-03 6:14 UTC (permalink / raw) To: Dmitry Lavnikevich Cc: shawn.guo, kernel, robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, linux, lgirdwood, broonie, perex, tiwai, linux-kernel, linux-arm-kernel, devicetree, alsa-devel On Wed, Oct 29, 2014 at 04:47:03PM +0300, Dmitry Lavnikevich wrote: > Audio on phyFLEX boards is presented by tlv320aic3007 codec connected > over SSI interface. > > Signed-off-by: Dmitry Lavnikevich <d.lavnikevich@sam-solutions.com> > --- > arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi | 100 ++++++++++++++++++++++++++- > arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 15 ++++ > 2 files changed, 113 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi > index f1bdcae5b97d..cb8f1b6ec083 100644 > --- a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi > +++ b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi > @@ -9,10 +9,73 @@ > * http://www.gnu.org/copyleft/gpl.html > */ > > +#include <dt-bindings/sound/fsl-imx-audmux.h> > + > / { > chosen { > linux,stdout-path = &uart4; > }; > + > + regulators { > + sound_1v8: regulator@2 { > + compatible = "regulator-fixed"; > + reg = <2>; > + regulator-name = "i2s-audio-1v8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + sound_3v3: regulator@3 { > + compatible = "regulator-fixed"; > + reg = <3>; > + regulator-name = "i2s-audio-3v3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + }; > + }; > + > + tlv320_mclk: oscillator { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <19200000>; > + clock-output-names = "tlv320-mclk"; > + }; > + > + sound { > + compatible = "simple-audio-card"; > + simple-audio-card,name = "OnboardTLV320AIC3007"; > + simple-audio-card,format = "i2s"; > + simple-audio-card,bitclock-master = <&dailink_master>; > + simple-audio-card,frame-master = <&dailink_master>; > + simple-audio-card,widgets = > + "Microphone", "Mic Jack", > + "Line", "Line In", > + "Line", "Line Out", > + "Speaker", "Speaker", > + "Headphone", "Headphone Jack"; > + simple-audio-card,routing = > + "Line Out", "LLOUT", > + "Line Out", "RLOUT", > + "Speaker", "SPOP", > + "Speaker", "SPOM", > + "Headphone Jack", "HPLOUT", > + "Headphone Jack", "HPROUT", > + "MIC3L", "Mic Jack", > + "MIC3R", "Mic Jack", > + "Mic Jack", "Mic Bias", > + "LINE1L", "Line In", > + "LINE1R", "Line In"; > + > + simple-audio-card,cpu { > + sound-dai = <&ssi2>; > + }; > + > + dailink_master: simple-audio-card,codec { > + sound-dai = <&codec>; > + clocks = <&tlv320_mclk>; > + }; > + }; > + > }; > > &fec { > @@ -27,12 +90,45 @@ > status = "okay"; > }; > > +&ssi2 { > + status = "okay"; > +}; > + > +&audmux { Please sort the nodes alphabetically in label name. > + status = "okay"; > + > + ssi2 { > + fsl,audmux-port = <1>; > + fsl,port-config = < > + (IMX_AUDMUX_V2_PTCR_TFSDIR | > + IMX_AUDMUX_V2_PTCR_TFSEL(4) | > + IMX_AUDMUX_V2_PTCR_TCLKDIR | > + IMX_AUDMUX_V2_PTCR_TCSEL(4)) > + IMX_AUDMUX_V2_PDCR_RXDSEL(4) > + >; > + }; > + pins5 { Have a new line between nodes. > + fsl,audmux-port = <4>; > + fsl,port-config = < > + 0x00000000 > + IMX_AUDMUX_V2_PDCR_RXDSEL(1) > + >; > + }; > +}; > + > &i2c2 { > status = "okay"; > > - tlv320@18 { > - compatible = "ti,tlv320aic3x"; > + codec: tlv320@18 { > + compatible = "ti,tlv320aic3007"; Both compatible strings are documented in Documentation/devicetree/bindings/sound/tlv320aic3x.txt. But I hope this change will not cause any DT compatible issues. > + #sound-dai-cells = <0>; > reg = <0x18>; > + ai3x-micbias-vg = <2>; > + > + AVDD-supply = <&sound_3v3>; > + IOVDD-supply = <&sound_3v3>; > + DRVDD-supply = <&sound_3v3>; > + DVDD-supply = <&sound_1v8>; > }; > > stmpe@41 { > diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi > index aa2275671d2c..d7f34664e008 100644 > --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi > +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi > @@ -58,6 +58,12 @@ > }; > }; > > +&audmux { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_audmux>; > + status = "disabled"; > +}; > + > &ecspi3 { > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_ecspi3>; > @@ -319,6 +325,15 @@ > MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 > >; > }; > + > + pinctrl_audmux: audmuxgrp { Please sort the pinctrl entries alphabetically. Shawn > + fsl,pins = < > + MX6QDL_PAD_DISP0_DAT16__AUD5_TXC 0x130b0 > + MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS 0x130b0 > + MX6QDL_PAD_DISP0_DAT17__AUD5_TXD 0x110b0 > + MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0 > + >; > + }; > }; > }; > > -- > 2.1.2 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v5 2/3] ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards 2014-11-03 6:14 ` Shawn Guo @ 2014-11-04 11:40 ` Dmitry Lavnikevich 0 siblings, 0 replies; 7+ messages in thread From: Dmitry Lavnikevich @ 2014-11-04 11:40 UTC (permalink / raw) To: Shawn Guo Cc: shawn.guo-KZfg59tc24xl57MIdRCFDg@public.gmane.org, kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org, robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, pawel.moll-5wv7dgnIgG8@public.gmane.org, mark.rutland-5wv7dgnIgG8@public.gmane.org, ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org, galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org, linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org, lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, perex-/Fr2/VpizcU@public.gmane.org, tiwai-l3A5Bk7waGM@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org > On 3Nov, 2014, at 09:14, Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> wrote: > On Wed, Oct 29, 2014 at 04:47:03PM +0300, Dmitry Lavnikevich wrote: >> + fsl,audmux-port = <4>; >> + fsl,port-config = < >> + 0x00000000 >> + IMX_AUDMUX_V2_PDCR_RXDSEL(1) >> + >; >> + }; >> +}; >> + >> &i2c2 { >> status = "okay"; >> >> - tlv320@18 { >> - compatible = "ti,tlv320aic3x"; >> + codec: tlv320@18 { >> + compatible = "ti,tlv320aic3007"; > > Both compatible strings are documented in > Documentation/devicetree/bindings/sound/tlv320aic3x.txt. But I hope > this change will not cause any DT compatible issues. This change is needed because unlike other tlv320aic3x-codecs tlv320aic3007 has D-class amplifier which is controlled by set of registers that in case of 3x-codecs control mono output. I will correct patches according to other notes and soon will resend patchset.-- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH v5 3/3] ARM: imx_v6_v7_defconfig: enable tlv320aic3x audio codec by default 2014-10-29 13:47 [PATCH v5 0/3] Add Phytec pbab01 audio support Dmitry Lavnikevich 2014-10-29 13:47 ` [PATCH v5 2/3] ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards Dmitry Lavnikevich @ 2014-10-29 13:47 ` Dmitry Lavnikevich [not found] ` <1414590424-25585-1-git-send-email-d.lavnikevich-H6HfJ9slvY0Aspv4Qr0y0gC/G2K4zDHf@public.gmane.org> 2 siblings, 0 replies; 7+ messages in thread From: Dmitry Lavnikevich @ 2014-10-29 13:47 UTC (permalink / raw) To: shawn.guo, kernel, robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, linux, lgirdwood, broonie, perex, tiwai Cc: linux-kernel, linux-arm-kernel, devicetree, alsa-devel, Dmitry Lavnikevich Used on Phytec PBAB01 board. Signed-off-by: Dmitry Lavnikevich <d.lavnikevich@sam-solutions.com> --- arch/arm/configs/imx_v6_v7_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 8fca6e276b69..cac07d67b933 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -210,6 +210,7 @@ CONFIG_SND_SOC_IMX_WM8962=y CONFIG_SND_SOC_IMX_SGTL5000=y CONFIG_SND_SOC_IMX_SPDIF=y CONFIG_SND_SOC_IMX_MC13783=y +CONFIG_SND_SOC_TLV320AIC3X=y CONFIG_SND_SIMPLE_CARD=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y -- 2.1.2 ^ permalink raw reply related [flat|nested] 7+ messages in thread
[parent not found: <1414590424-25585-1-git-send-email-d.lavnikevich-H6HfJ9slvY0Aspv4Qr0y0gC/G2K4zDHf@public.gmane.org>]
* [PATCH v5 1/3] ARM: dts: pbab01: move i2c pins and frequency configuration into pfla02 [not found] ` <1414590424-25585-1-git-send-email-d.lavnikevich-H6HfJ9slvY0Aspv4Qr0y0gC/G2K4zDHf@public.gmane.org> @ 2014-10-29 13:47 ` Dmitry Lavnikevich 2014-10-29 13:53 ` [alsa-devel] [PATCH v5 0/3] Add Phytec pbab01 audio support Fabio Estevam 1 sibling, 0 replies; 7+ messages in thread From: Dmitry Lavnikevich @ 2014-10-29 13:47 UTC (permalink / raw) To: shawn.guo-KZfg59tc24xl57MIdRCFDg, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, pawel.moll-5wv7dgnIgG8, mark.rutland-5wv7dgnIgG8, ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg, galak-sgV2jX0FEOL9JmXXK+q4OQ, linux-lFZ/pmaqli7XmaaqVzeoHQ, lgirdwood-Re5JQEeQqe8AvxtiuMwx3w, broonie-DgEjT+Ai2ygdnm+yROfE0A, perex-/Fr2/VpizcU, tiwai-l3A5Bk7waGM Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree-u79uwXL29TY76Z2rM5mHXA, alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw, Dmitry Lavnikevich Since pins and frequency are specific to module (pfla02), not base board (pbab02), it is better to be initialized in corresponding dts file. This patch fixes i2c2, i2c3 pin configuration which caused messages: imx6q-pinctrl 20e0000.iomuxc: no groups defined in /soc/aips-bus@02000000/iomuxc@020e0000/i2c2grp imx6q-pinctrl 20e0000.iomuxc: no groups defined in /soc/aips-bus@02000000/iomuxc@020e0000/i2c3grp imx6q-pinctrl 20e0000.iomuxc: unable to find group for node i2c2grp imx6q-pinctrl 20e0000.iomuxc: unable to find group for node i2c3grp Signed-off-by: Dmitry Lavnikevich <d.lavnikevich-H6HfJ9slvY0Aspv4Qr0y0gC/G2K4zDHf@public.gmane.org> --- arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi | 22 ---------------------- arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 26 ++++++++++++++++++++++++++ 2 files changed, 26 insertions(+), 22 deletions(-) diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi index 584721264121..f1bdcae5b97d 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi @@ -28,9 +28,6 @@ }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - clock-frequency = <100000>; status = "okay"; tlv320@18 { @@ -55,9 +52,6 @@ }; &i2c3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3>; - clock-frequency = <100000>; status = "okay"; }; @@ -84,19 +78,3 @@ &usdhc3 { status = "okay"; }; - -&iomuxc { - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1 - >; - }; - - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 - >; - }; -}; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index 0e50bb0a6b94..aa2275671d2c 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -162,6 +162,18 @@ }; }; +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clock-frequency = <100000>; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clock-frequency = <100000>; +}; + &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; @@ -235,6 +247,20 @@ >; }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 + >; + }; + pinctrl_uart3: uart3grp { fsl,pins = < MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 -- 2.1.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [alsa-devel] [PATCH v5 0/3] Add Phytec pbab01 audio support [not found] ` <1414590424-25585-1-git-send-email-d.lavnikevich-H6HfJ9slvY0Aspv4Qr0y0gC/G2K4zDHf@public.gmane.org> 2014-10-29 13:47 ` [PATCH v5 1/3] ARM: dts: pbab01: move i2c pins and frequency configuration into pfla02 Dmitry Lavnikevich @ 2014-10-29 13:53 ` Fabio Estevam 1 sibling, 0 replies; 7+ messages in thread From: Fabio Estevam @ 2014-10-29 13:53 UTC (permalink / raw) To: Dmitry Lavnikevich, Shawn Guo Cc: Shawn Guo, Sascha Hauer, robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Russell King, Liam Girdwood, Mark Brown, perex-/Fr2/VpizcU, Takashi Iwai, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org, linux-kernel, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org On Wed, Oct 29, 2014 at 11:47 AM, Dmitry Lavnikevich <d.lavnikevich-H6HfJ9slvY0Aspv4Qr0y0gC/G2K4zDHf@public.gmane.org> wrote: > By mistake previous patchset versions was sent as in-reply-to to > previous patchset versions, so they may have been lost among other > mails. > > One of pathces was already applied by Mark Brown, here is 3 patches > implementing audio support on Phytec phyFLEX-i.MX6 boards. > > This patchset version only renames audio card name to > OnboardTLV320AIC3007 (on request from Phytec). > > Patches are based on branch for-next of > git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git Adding Shawn's email from Linaro. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2014-11-04 11:40 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-10-29 13:47 [PATCH v5 0/3] Add Phytec pbab01 audio support Dmitry Lavnikevich
2014-10-29 13:47 ` [PATCH v5 2/3] ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards Dmitry Lavnikevich
2014-11-03 6:14 ` Shawn Guo
2014-11-04 11:40 ` Dmitry Lavnikevich
2014-10-29 13:47 ` [PATCH v5 3/3] ARM: imx_v6_v7_defconfig: enable tlv320aic3x audio codec by default Dmitry Lavnikevich
[not found] ` <1414590424-25585-1-git-send-email-d.lavnikevich-H6HfJ9slvY0Aspv4Qr0y0gC/G2K4zDHf@public.gmane.org>
2014-10-29 13:47 ` [PATCH v5 1/3] ARM: dts: pbab01: move i2c pins and frequency configuration into pfla02 Dmitry Lavnikevich
2014-10-29 13:53 ` [alsa-devel] [PATCH v5 0/3] Add Phytec pbab01 audio support Fabio Estevam
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).