Re: [RESUBMIT PATCH v6 1/8] mfd: Add support for Skyworks SKY81452 driver

[Lee Jones <lee.jones@linaro.org>]

On Mon, 03 Nov 2014, Lee Jones wrote:

> On Fri, 31 Oct 2014, gyungoh@gmail.com wrote:
> 
> > From: Gyungoh Yoo <jack.yoo@skyworksinc.com>
> > 
> > Signed-off-by: Gyungoh Yoo <jack.yoo@skyworksinc.com>
> > ---
> > Changes v6:
> > Added new line character at the end of line of dev_err()
> > 
> > Changes v5:
> > Move sky81452-backlight.h to include/linux/platform_data
> > 
> > Changes v4:
> > Removed MODULE_VERSION()
> > Modified license to GPLv2
> > 
> > Changes v3:
> > Fixed the backlight name from 'sky81452-bl' to 'sky81452-backlight'
> > Assigned mfd_cell.of_compatible for binding device node
> > Modified error messages
> > 
> > Changes v2:
> > Renamed CONFIG_SKY81452 to CONFIG_MFD_SKY81452
> > Changed the dependency from I2C=y to I2C, for CONFIG_MFD_SKY81452
> > Added message for exception or errors
> > 
> >  drivers/mfd/Kconfig          |  12 +++++
> >  drivers/mfd/Makefile         |   1 +
> >  drivers/mfd/sky81452.c       | 109 +++++++++++++++++++++++++++++++++++++++++++
> >  include/linux/mfd/sky81452.h |  32 +++++++++++++
> >  4 files changed, 154 insertions(+)
> >  create mode 100644 drivers/mfd/sky81452.c
> >  create mode 100644 include/linux/mfd/sky81452.h
> 
> Code looks fine, but what are its dependencies.  I'm assuming nothing;
> however, did Mark say that something depends on it?  If so, what and
> what are you going to do about it?

Okay, so this driver does in fact have a dependancy on the Backlight
driver.  Until I get a Backlight Ack from either Brian and/or Jingoo,
there is nothing I can do.

Patch unapplied.

> > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> > index 1456ea7..a54244c 100644
> > --- a/drivers/mfd/Kconfig
> > +++ b/drivers/mfd/Kconfig
> > @@ -693,6 +693,18 @@ config MFD_SM501_GPIO
> >  	 lines on the SM501. The platform data is used to supply the
> >  	 base number for the first GPIO line to register.
> >  
> > +config MFD_SKY81452
> > +	tristate "Skyworks Solutions SKY81452"
> > +	select MFD_CORE
> > +	select REGMAP_I2C
> > +	depends on I2C
> > +	help
> > +	  This is the core driver for the Skyworks SKY81452 backlight and
> > +	  voltage regulator device.
> > +
> > +	  This driver can also be built as a module.  If so, the module
> > +	  will be called sky81452.
> > +
> >  config MFD_SMSC
> >         bool "SMSC ECE1099 series chips"
> >         depends on I2C=y
> > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> > index 8bd54b1..d9683ea 100644
> > --- a/drivers/mfd/Makefile
> > +++ b/drivers/mfd/Makefile
> > @@ -174,6 +174,7 @@ obj-$(CONFIG_MFD_STW481X)	+= stw481x.o
> >  obj-$(CONFIG_MFD_IPAQ_MICRO)	+= ipaq-micro.o
> >  obj-$(CONFIG_MFD_MENF21BMC)	+= menf21bmc.o
> >  obj-$(CONFIG_MFD_HI6421_PMIC)	+= hi6421-pmic-core.o
> > +obj-$(CONFIG_MFD_SKY81452)		+= sky81452.o
> >  
> >  intel-soc-pmic-objs		:= intel_soc_pmic_core.o intel_soc_pmic_crc.o
> >  obj-$(CONFIG_INTEL_SOC_PMIC)	+= intel-soc-pmic.o
> > diff --git a/drivers/mfd/sky81452.c b/drivers/mfd/sky81452.c
> > new file mode 100644
> > index 0000000..ae1b584
> > --- /dev/null
> > +++ b/drivers/mfd/sky81452.c
> > @@ -0,0 +1,109 @@
> > +/*
> > + * sky81452.c	SKY81452 MFD driver
> > + *
> > + * Copyright 2014 Skyworks Solutions Inc.
> > + * Author : Gyungoh Yoo <jack.yoo@skyworksinc.com>
> > + *
> > + * This program is free software; you can redistribute it and/or modify it
> > + * under the terms of the GNU General Public License as published by the
> > + * Free Software Foundation; either version 2, or (at your option) any
> > + * later version.
> > + *
> > + * This program is distributed in the hope that it will be useful, but
> > + * WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
> > + * General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public License along
> > + * with this program; if not, see <http://www.gnu.org/licenses/>.
> > + */
> > +
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/init.h>
> > +#include <linux/err.h>
> > +#include <linux/slab.h>
> > +#include <linux/i2c.h>
> > +#include <linux/regmap.h>
> > +#include <linux/mfd/core.h>
> > +#include <linux/mfd/sky81452.h>
> > +
> > +static const struct regmap_config sky81452_config = {
> > +	.reg_bits = 8,
> > +	.val_bits = 8,
> > +};
> > +
> > +static int sky81452_probe(struct i2c_client *client,
> > +				const struct i2c_device_id *id)
> > +{
> > +	struct device *dev = &client->dev;
> > +	const struct sky81452_platform_data *pdata = dev_get_platdata(dev);
> > +	struct mfd_cell cells[2];
> > +	struct regmap *regmap;
> > +	int ret;
> > +
> > +	if (!pdata) {
> > +		pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
> > +		if (!pdata)
> > +			return -ENOMEM;
> > +	}
> > +
> > +	regmap = devm_regmap_init_i2c(client, &sky81452_config);
> > +	if (IS_ERR(regmap)) {
> > +		dev_err(dev, "failed to initialize.err=%ld\n", PTR_ERR(regmap));
> > +		return PTR_ERR(regmap);
> > +	}
> > +
> > +	i2c_set_clientdata(client, regmap);
> > +
> > +	memset(cells, 0, sizeof(cells));
> > +	cells[0].name = "sky81452-backlight";
> > +	cells[0].of_compatible = "skyworks,sky81452-backlight";
> > +	cells[0].platform_data = pdata->bl_pdata;
> > +	cells[0].pdata_size = sizeof(*pdata->bl_pdata);
> > +	cells[1].name = "sky81452-regulator";
> > +	cells[1].platform_data = pdata->regulator_init_data;
> > +	cells[1].pdata_size = sizeof(*pdata->regulator_init_data);
> > +
> > +	ret = mfd_add_devices(dev, -1, cells, ARRAY_SIZE(cells), NULL, 0, NULL);
> > +	if (ret)
> > +		dev_err(dev, "failed to add child devices. err=%d\n", ret);
> > +
> > +	return ret;
> > +}
> > +
> > +static int sky81452_remove(struct i2c_client *client)
> > +{
> > +	mfd_remove_devices(&client->dev);
> > +	return 0;
> > +}
> > +
> > +static const struct i2c_device_id sky81452_ids[] = {
> > +	{ "sky81452" },
> > +	{ }
> > +};
> > +MODULE_DEVICE_TABLE(i2c, sky81452_ids);
> > +
> > +#ifdef CONFIG_OF
> > +static const struct of_device_id sky81452_of_match[] = {
> > +	{ .compatible = "skyworks,sky81452", },
> > +	{ }
> > +};
> > +MODULE_DEVICE_TABLE(of, sky81452_of_match);
> > +#endif
> > +
> > +static struct i2c_driver sky81452_driver = {
> > +	.driver = {
> > +		.name = "sky81452",
> > +		.of_match_table = of_match_ptr(sky81452_of_match),
> > +	},
> > +	.probe = sky81452_probe,
> > +	.remove = sky81452_remove,
> > +	.id_table = sky81452_ids,
> > +};
> > +
> > +module_i2c_driver(sky81452_driver);
> > +
> > +MODULE_DESCRIPTION("Skyworks SKY81452 MFD driver");
> > +MODULE_AUTHOR("Gyungoh Yoo <jack.yoo@skyworksinc.com>");
> > +MODULE_LICENSE("GPL v2");
> > diff --git a/include/linux/mfd/sky81452.h b/include/linux/mfd/sky81452.h
> > new file mode 100644
> > index 0000000..9d84872
> > --- /dev/null
> > +++ b/include/linux/mfd/sky81452.h
> > @@ -0,0 +1,32 @@
> > +/*
> > + * sky81452.h	SKY81452 MFD driver
> > + *
> > + * Copyright 2014 Skyworks Solutions Inc.
> > + * Author : Gyungoh Yoo <jack.yoo@skyworksinc.com>
> > + *
> > + * This program is free software; you can redistribute it and/or modify it
> > + * under the terms of the GNU General Public License as published by the
> > + * Free Software Foundation; either version 2, or (at your option) any
> > + * later version.
> > + *
> > + * This program is distributed in the hope that it will be useful, but
> > + * WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
> > + * General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public License along
> > + * with this program; if not, see <http://www.gnu.org/licenses/>.
> > + */
> > +
> > +#ifndef _SKY81452_H
> > +#define _SKY81452_H
> > +
> > +#include <linux/platform_data/sky81452-backlight.h>
> > +#include <linux/regulator/machine.h>
> > +
> > +struct sky81452_platform_data {
> > +	struct sky81452_bl_platform_data *bl_pdata;
> > +	struct regulator_init_data *regulator_init_data;
> > +};
> > +
> > +#endif
> 

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog