From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tony Lindgren Subject: Re: [PATCH v2] ARM: dts: sbc-t3x: add DVI display data Date: Tue, 11 Nov 2014 06:49:12 -0800 Message-ID: <20141111144911.GK31454@atomide.com> References: <1413364186-23752-1-git-send-email-lifshitz@compulab.co.il> <1414927198-7127-1-git-send-email-lifshitz@compulab.co.il> <54561E45.7000404@compulab.co.il> <20141110174845.GP31454@atomide.com> <5461FAEF.3010607@compulab.co.il> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <5461FAEF.3010607@compulab.co.il> Sender: linux-omap-owner@vger.kernel.org To: Igor Grinberg Cc: Dmitry Lifshitz , =?utf-8?Q?Beno=C3=AEt?= Cousson , linux-omap@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org * Igor Grinberg [141111 04:04]: > Hi Tony, > > On 11/10/14 19:48, Tony Lindgren wrote: > > * Igor Grinberg [141102 04:08]: > >> On 11/02/14 13:19, Dmitry Lifshitz wrote: > >>> Add DSS related pinmux and display data nodes required to support > >>> DVI video out on SBC-T3530, SBC-T3730 and SBC-T3517. > >>> > >>> Signed-off-by: Dmitry Lifshitz > >> > >> Acked-by: Igor Grinberg > > > > Thanks applying into omap-for-v3.19/dt. > > > > Are we now ready to drop the board-cm-*.c files? > > Let's see, below is a list of things that are yet to be > supported in DT boot: > NAND, TV, LCD, Touchscreen, Audio (CM-T3x30), RTC (CM-T3517), CAN (CM-3517). OK great, hopefully that's mostly just configuring the .dts files. > We're rc4 now, so hopefully, we will be able to get all this in for 3.19 > and then have the board files removed for 3.20. Yes something like that sounds good to me. We should allow at least one release for people to change over. > This way we can have 3.19 with both ways supported and do last checks. > > Are you ok with this? Sure if you get the changes posted before -rc6, otherwise it will be too late for v3.19. Regards, Tony