Re: [PATCH] of: support passing console options with stdout-path

[Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>]

On Tue, Nov 25, 2014 at 12:00:16AM +0100, Andrew Lunn wrote:
> On Mon, Nov 24, 2014 at 10:23:58PM +0000, Leif Lindholm wrote:
> > Support specifying console options (like with console=ttyXN,<options>)
> > by appending them to the stdout-path property after a separating ':'.
> > 
> > Example:
> > 	stdout-path = "uart0:115200";
> > 
> > This patch also modifies of_find_node_by_path() to match only the
> > portion of the path before a ':'.
> 
> Hi Leif
> 
> These appears to somewhat conform to ePAPR, which says:
> 
>       A string that specifies the full path to the node representing
>       the device to be used for boot console output. If the character
>       ":" is present in the value it terminates the path.
> 
> So you can put any random junk after the :. However, are we going to
> have backward/forward compatibility problems, and problems with
> bootloaders? The current kernel code does not look for the :. So a new
> DT blob on an old kernel will not work so well.
> 
> More worrying, barebox does not support the : either. So there is a
> danger your bootloader suddenly goes silent after a dt blob update.

Since in barebox we use the upstream Kernel devicetrees it will be under
our control when they arrive, so we can add support for that ':'
before the new devicetrees arrive.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html