From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lee Jones Subject: Re: [PATCHv2 5/5] mfd: s2mps11: Add binding documentation for Samsung S2MPS13 PMIC Date: Tue, 25 Nov 2014 15:51:51 +0000 Message-ID: <20141125155151.GN4241@x1> References: <1416301183-10478-1-git-send-email-cw00.choi@samsung.com> <1416301183-10478-6-git-send-email-cw00.choi@samsung.com> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Content-Disposition: inline In-Reply-To: <1416301183-10478-6-git-send-email-cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Chanwoo Choi Cc: broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, a.zummo-BfzFCNDTiLLj+vYz1yj4TQ@public.gmane.org, lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, sbkim73-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org, sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org, geunsik.lim-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org, inki.dae-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org, kyungmin.park-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org, k.kozlowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: devicetree@vger.kernel.org On Tue, 18 Nov 2014, Chanwoo Choi wrote: > This patch adds the binding documentation for Samsung S2MPS13 PMIC > which is similiar with existing S2MPS14 PMIC. S2MPS13 has the differe= nt number > of regulators from S2MPS14 and RTC/Clock is the same with the S2MPS14= =2E >=20 > Cc: Lee Jones > Signed-off-by: Chanwoo Choi > Acked-by: Sangbeom Kim > Acked-by: Lee Jones > Reviewed-by: Krzysztof Kozlowski > --- > Documentation/devicetree/bindings/mfd/s2mps11.txt | 22 ++++++++++++-= --------- > 1 file changed, 12 insertions(+), 10 deletions(-) Applied, thanks. > diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Docu= mentation/devicetree/bindings/mfd/s2mps11.txt > index 0e4026a..57a0450 100644 > --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt > +++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt > @@ -1,5 +1,5 @@ > =20 > -* Samsung S2MPS11, S2MPS14 and S2MPU02 Voltage and Current Regulator > +* Samsung S2MPS11, S2MPS13, S2MPS14 and S2MPU02 Voltage and Current = Regulator > =20 > The Samsung S2MPS11 is a multi-function device which includes voltag= e and > current regulators, RTC, charger controller and other sub-blocks. It= is > @@ -7,8 +7,8 @@ interfaced to the host controller using an I2C interf= ace. Each sub-block is > addressed by the host system using different I2C slave addresses. > =20 > Required properties: > -- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps14-p= mic" > - or "samsung,s2mpu02-pmic". > +- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps13-p= mic" > + or "samsung,s2mps14-pmic" or "samsung,s2mpu02-pmic". > - reg: Specifies the I2C slave address of the pmic block. It should = be 0x66. > =20 > Optional properties: > @@ -17,8 +17,8 @@ Optional properties: > - interrupts: Interrupt specifiers for interrupt sources. > =20 > Optional nodes: > -- clocks: s2mps11 and s5m8767 provide three(AP/CP/BT) buffered 32.76= 8 KHz > - outputs, so to register these as clocks with common clock framewor= k > +- clocks: s2mps11, s2mps13 and s5m8767 provide three(AP/CP/BT) buffe= red 32.768 > + KHz outputs, so to register these as clocks with common clock fram= ework > instantiate a sub-node named "clocks". It uses the common clock bi= nding > documented in : > [Documentation/devicetree/bindings/clock/clock-bindings.txt] > @@ -30,12 +30,12 @@ Optional nodes: > the clock which they consume. > Clock ID Devices > ---------------------------------------------------------- > - 32KhzAP 0 S2MPS11, S2MPS14, S5M8767 > - 32KhzCP 1 S2MPS11, S5M8767 > - 32KhzBT 2 S2MPS11, S2MPS14, S5M8767 > + 32KhzAP 0 S2MPS11, S2MPS13, S2MPS14, S5M8767 > + 32KhzCP 1 S2MPS11, S2MPS13, S5M8767 > + 32KhzBT 2 S2MPS11, S2MPS13, S2MPS14, S5M8767 > =20 > - - compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2= mps14-clk", > - "samsung,s5m8767-clk" > + - compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2= mps13-clk", > + "samsung,s2mps14-clk", "samsung,s5m8767-clk" > =20 > - regulators: The regulators of s2mps11 that have to be instantiated= should be > included in a sub-node named 'regulators'. Regulator nodes included = in this > @@ -81,12 +81,14 @@ as per the datasheet of s2mps11. > - LDOn > - valid values for n are: > - S2MPS11: 1 to 38 > + - S2MPS13: 1 to 40 > - S2MPS14: 1 to 25 > - S2MPU02: 1 to 28 > - Example: LDO1, LDO2, LDO28 > - BUCKn > - valid values for n are: > - S2MPS11: 1 to 10 > + - S2MPS13: 1 to 10 > - S2MPS14: 1 to 5 > - S2MPU02: 1 to 7 > - Example: BUCK1, BUCK2, BUCK9 --=20 Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org =E2=94=82 Open source software for ARM SoCs =46ollow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe devicetree" i= n the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html