Re: [PATCH v2 1/3] power: reset: read priority from device tree

[Guenter Roeck <linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>]

On Mon, Dec 01, 2014 at 05:11:26PM +0000, Mark Rutland wrote:
> On Mon, Dec 01, 2014 at 05:03:07PM +0000, Stefan Agner wrote:
> > This patch adds an optional property which allows to specify the
> > reset source priority. This priority is used by the kernel restart
> > handler call chain to sort out the proper reset/restart method.
> > Depending on the power design of a board or other machine/board
> > specific peculiarity, it is not possible to pick a generic priority.
> > 
> > Signed-off-by: Stefan Agner <stefan-XLVq0VzYD2Y@public.gmane.org>
> > ---
> >  Documentation/devicetree/bindings/power/reset/syscon-reboot.txt | 3 +++
> >  drivers/power/reset/syscon-reboot.c                             | 5 ++++-
> >  2 files changed, 7 insertions(+), 1 deletion(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/power/reset/syscon-reboot.txt b/Documentation/devicetree/bindings/power/reset/syscon-reboot.txt
> > index 1190631..ee41d9c 100644
> > --- a/Documentation/devicetree/bindings/power/reset/syscon-reboot.txt
> > +++ b/Documentation/devicetree/bindings/power/reset/syscon-reboot.txt
> > @@ -11,6 +11,9 @@ Required properties:
> >  - offset: offset in the register map for the reboot register (in bytes)
> >  - mask: the reset value written to the reboot register (32 bit access)
> >  
> > +Optional properties:
> > +- priority: define the priority of the reset (0-255, defaults to 128)
> > +
> 
> NAK. This is a leak of Linux-internal details.
> 
> What is this necessary for?
> 
It establishes which restart handler to use if there more than one means
to reset the system. See documentation to register_restart_handler() in
kernel/reboot.c.

Guenter
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html