Re: [PATCH v3 1/2] iio: document ti-dac8554 devicetree bindings

[Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>]

On Mon, Dec 15, 2014 at 11:39:56AM +0000, Nikolaus Schulz wrote:
> Signed-off-by: Nikolaus Schulz <nikolaus.schulz-RM9K5IK7kjKj5M59NBduVrNAH6kLmebB@public.gmane.org>
> ---
>  .../devicetree/bindings/iio/dac/ti-dac8554.txt     | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/dac/ti-dac8554.txt
> 
> diff --git a/Documentation/devicetree/bindings/iio/dac/ti-dac8554.txt b/Documentation/devicetree/bindings/iio/dac/ti-dac8554.txt
> new file mode 100644
> index 0000000..32e96859
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/dac/ti-dac8554.txt
> @@ -0,0 +1,22 @@
> +TI DAC8554 Digital to Analog Converter
> +
> +This driver supports the SPI bus.

The binding need not refer to the driver, this sentence can go. It might
be worth adding "(SPI)" to the first line.

> +
> +Required properties:
> +	- compatible: must be "ti,dac8554"
> +	- vref-supply: the vref power supply
> +	- ti,address: the additional 2-bit chip address
> +
> +For required properties on SPI, please consult
> +Documentation/devicetree/bindings/spi/spi-bus.txt
> +
> +Example:
> +
> +	dac8554@0 {
> +		compatible = "ti,dac8554";
> +		reg = <0>;
> +		spi-max-frequency = <50000000>;
> +
> +		vref-supply = <&vdd_vref>;
> +		ti,address = <0>;

What's this property used for?

> +	};

Otherwise this looks sane to me.

Mark.