From mboxrd@z Thu Jan 1 00:00:00 1970 From: Shawn Guo Subject: Re: [PATCH 1/2] arm: dts: imx6q: update cpufreq volt/freq table Date: Tue, 16 Dec 2014 14:35:06 +0800 Message-ID: <20141216063504.GC2411@dragon> References: <1417767829-11314-1-git-send-email-b20788@freescale.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <1417767829-11314-1-git-send-email-b20788-KZfg59tc24xl57MIdRCFDg@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Anson Huang Cc: kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: devicetree@vger.kernel.org On Fri, Dec 05, 2014 at 04:23:48PM +0800, Anson Huang wrote: > According to latest i.MX6Q datasheet Rev. 3, 02/2014, > the latest cpufreq volt/freq table is as below: > > LDO enabled/bypassed(min value): > 996MHz: VDDARM: 1.225V, VDDSOC: 1.150V; > 792MHz: VDDARM: 1.150V, VDDSOC: 1.150V; > 396MHz: VDDARM: 0.925V, VDDSOC: 1.150V; > > the 792MHz setpoint's VDDARM min voltage is updated > from 1.125V to 1.150V, adding 25mV to cover board IR > drop, 1.175V is the right voltage we should use. > > Signed-off-by: Anson Huang Applied both. Please use uppercase "ARM: " as patch prefix in the future. Shawn -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html