From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andrew Lunn Subject: Re: [PATCH 1/2] ARM: dts: kirkwood: enable phy driver for SATA controller on 88f6192 Date: Tue, 16 Dec 2014 09:19:22 +0100 Message-ID: <20141216081922.GA1450@lunn.ch> References: <20141215203724.GA22936@anne> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <20141215203724.GA22936@anne> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Evgeni Dobrev Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, Jason Cooper , Sebastian Hesselbarth , Gregory Clement List-Id: devicetree@vger.kernel.org On Mon, Dec 15, 2014 at 09:37:24PM +0100, Evgeni Dobrev wrote: > This patch enables the phy drivers for the SATA controller on Marvell's 88f6192. Without them it is not possible to use SATA drives attached to this processor. > > Signed-off-by: Evgeni Dobrev Acked-by: Andrew Lunn This should also go to stable. Andrew > --- > arch/arm/boot/dts/kirkwood-6192.dtsi | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/arch/arm/boot/dts/kirkwood-6192.dtsi b/arch/arm/boot/dts/kirkwood-6192.dtsi > index dd81508..bed2dec 100644 > --- a/arch/arm/boot/dts/kirkwood-6192.dtsi > +++ b/arch/arm/boot/dts/kirkwood-6192.dtsi > @@ -66,6 +66,8 @@ > interrupts = <21>; > clocks = <&gate_clk 14>, <&gate_clk 15>; > clock-names = "0", "1"; > + phys = <&sata_phy0>, <&sata_phy1>; > + phy-names = "port0", "port1"; > status = "disabled"; > }; > > -- > 1.7.10.4 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html