[PATCH v10 3/6] devicetree: mfd: Add new SKY81452 mfd binding

[PATCH v10 3/6] devicetree: mfd: Add new SKY81452 mfd binding

[gyungoh]

From: Gyungoh Yoo <jack.yoo@skyworksinc.com>

Signed-off-by: Gyungoh Yoo <jack.yoo@skyworksinc.com>
---
Changes v10:
Nothing

Changes v9:
Nothing

Changes v8:
Made up the example for backlight DT

Changes v7:
Nothing

Changes v6:
Nothing

Changes v5:
Changed DT for regulator : 'lout' node should be defined under 'regulator'
Removed compatible string from sky81452-regulator driver

Changes v4:
Nothing

Changes v3:
Nothing

Changes v2:
Added reg attribute for I2C slave address

 Documentation/devicetree/bindings/mfd/sky81452.txt | 36 ++++++++++++++++++++++
 1 file changed, 36 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/sky81452.txt

diff --git a/Documentation/devicetree/bindings/mfd/sky81452.txt b/Documentation/devicetree/bindings/mfd/sky81452.txt
new file mode 100644
index 0000000..ab71473
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/sky81452.txt
@@ -0,0 +1,36 @@
+SKY81452 bindings
+
+Required properties:
+- compatible	: Must be "skyworks,sky81452"
+- reg		: I2C slave address
+
+Required child nodes:
+- backlight	: container node for backlight following the binding
+		in video/backlight/sky81452-backlight.txt
+- regulator	: container node for regulators following the binding
+		in regulator/sky81452-regulator.txt
+
+Example:
+
+	sky81452@2c {
+		compatible = "skyworks,sky81452";
+		reg = <0x2c>;
+
+		backlight {
+			compatible = "skyworks,sky81452-backlight";
+			name = "pwm-backlight";
+			skyworks,en-channels = <0x3f>;
+			skyworks,ignore-pwm;
+			skyworks,phase-shift;
+			skyworks,ovp-level = <20>;
+			skyworks,current-limit = <2300>;
+		};
+
+		regulator {
+			lout {
+				regulator-name = "sky81452-lout";
+				regulator-min-microvolt = <4500000>;
+				regulator-max-microvolt = <8000000>;
+			};
+		};
+	};
-- 
1.9.1

[PATCH v10 0/6] Add Skyworks SKY81452 device drivers

[gyungoh-Re5JQEeQqe8AvxtiuMwx3w]

From: Gyungoh Yoo <jack.yoo-tjhQNA90jdKqndwCJWfcng@public.gmane.org>

This patch set includes regulator and backlight driver for SKY81452.
Also it includes documents for device tree and module.
sky81452-regulator was already applied. So this series doesn't
include it.

v10:
Removed trivial get_brightness implementations for sky81452-backlight

v9:
Removed the change to remove MODULE_VERSION() for sky81452-regulator

v8:
Renamed property names for backlight with vendor prefix
Modified gpio-enable property to generic property for GPIO
Made up the example for backlight DT
Changed the DT parsing of regulator using regulator_node and of_match

v7:
Modified licensing text to GPLv2
Splitted Kconfig renaming from DT patch

v6:
Added new line character at the end of line of dev_err()

v5:
Changed DT for regulator : 'lout' node should be defined under 'regulator'
Removed compatible string from sky81452-regulator driver
Modified sky81452-regulator to return EINVAL when of_node is NULL
Move sky81452-backlight.h to include/linux/platform_data

v4:
Removed MODULE_VERSION()
Modified license to GPLv2
Removed calling to backlight_device_unregister() in sky81452-backlight

v3:
Cleaned-up DBG messages
Cleaned-up DT
Fixed the backlight name from 'sky81452-bl' to 'sky81452-backlight'
Assigned mfd_cell.of_compatible for binding device node
Modified error messages
Modified sky81452-regulator to return ENODATA when of_node is NULL

v2:
Split the patches for each sub-system
Added 'reg' attribute for I2C address in device tree documents
Added 'compatible' attribute in child drivers
Renamed CONFIG_SKY81452 to CONFIG_MFD_SKY81452
Changed the dependency from I2C=y to I2C, for CONFIG_MFD_SKY81452
Added message for exception or errors.
Added vendor prefix for Skyworks Solutions, Inc.
Add SKY81452 to the Trivial Devices list

Gyungoh Yoo (6):
  mfd: Add support for Skyworks SKY81452 driver
  backlight: Add support Skyworks SKY81452 backlight driver
  devicetree: mfd: Add new SKY81452 mfd binding
  devicetree: backlight: Add new SKY81452 backlight binding
  devicetree: Add vendor prefix for Skyworks Solutions, Inc.
  devicetree: i2c: Add SKY81452 to the Trivial Devices list

 .../devicetree/bindings/i2c/trivial-devices.txt    |   1 +
 Documentation/devicetree/bindings/mfd/sky81452.txt |  36 +++
 .../devicetree/bindings/vendor-prefixes.txt        |   1 +
 .../video/backlight/sky81452-backlight.txt         |  29 ++
 drivers/mfd/Kconfig                                |  12 +
 drivers/mfd/Makefile                               |   1 +
 drivers/mfd/sky81452.c                             | 108 +++++++
 drivers/video/backlight/Kconfig                    |  10 +
 drivers/video/backlight/Makefile                   |   1 +
 drivers/video/backlight/sky81452-backlight.c       | 334 +++++++++++++++++++++
 include/linux/mfd/sky81452.h                       |  31 ++
 include/linux/platform_data/sky81452-backlight.h   |  46 +++
 12 files changed, 610 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/sky81452.txt
 create mode 100644 Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt
 create mode 100644 drivers/mfd/sky81452.c
 create mode 100644 drivers/video/backlight/sky81452-backlight.c
 create mode 100644 include/linux/mfd/sky81452.h
 create mode 100644 include/linux/platform_data/sky81452-backlight.h

-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v10 1/6] mfd: Add support for Skyworks SKY81452 driver

[gyungoh-Re5JQEeQqe8AvxtiuMwx3w]

From: Gyungoh Yoo <jack.yoo-tjhQNA90jdKqndwCJWfcng@public.gmane.org>

Signed-off-by: Gyungoh Yoo <jack.yoo-tjhQNA90jdKqndwCJWfcng@public.gmane.org>
Acked-by: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
Changes v10:
Nothing

Changes v9:
Nothing

Changes v8:
Nothing

Changes v7:
Modified licensing text to GPLv2

Changes v6:
Added new line character at the end of line of dev_err()

Changes v5:
Move sky81452-backlight.h to include/linux/platform_data

Changes v4:
Removed MODULE_VERSION()
Modified license to GPLv2

Changes v3:
Fixed the backlight name from 'sky81452-bl' to 'sky81452-backlight'
Assigned mfd_cell.of_compatible for binding device node
Modified error messages

Changes v2:
Renamed CONFIG_SKY81452 to CONFIG_MFD_SKY81452
Changed the dependency from I2C=y to I2C, for CONFIG_MFD_SKY81452
Added message for exception or errors

 drivers/mfd/Kconfig          |  12 +++++
 drivers/mfd/Makefile         |   1 +
 drivers/mfd/sky81452.c       | 108 +++++++++++++++++++++++++++++++++++++++++++
 include/linux/mfd/sky81452.h |  31 +++++++++++++
 4 files changed, 152 insertions(+)
 create mode 100644 drivers/mfd/sky81452.c
 create mode 100644 include/linux/mfd/sky81452.h

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 1456ea7..a54244c 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -693,6 +693,18 @@ config MFD_SM501_GPIO
 	 lines on the SM501. The platform data is used to supply the
 	 base number for the first GPIO line to register.
 
+config MFD_SKY81452
+	tristate "Skyworks Solutions SKY81452"
+	select MFD_CORE
+	select REGMAP_I2C
+	depends on I2C
+	help
+	  This is the core driver for the Skyworks SKY81452 backlight and
+	  voltage regulator device.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called sky81452.
+
 config MFD_SMSC
        bool "SMSC ECE1099 series chips"
        depends on I2C=y
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 8bd54b1..d9683ea 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -174,6 +174,7 @@ obj-$(CONFIG_MFD_STW481X)	+= stw481x.o
 obj-$(CONFIG_MFD_IPAQ_MICRO)	+= ipaq-micro.o
 obj-$(CONFIG_MFD_MENF21BMC)	+= menf21bmc.o
 obj-$(CONFIG_MFD_HI6421_PMIC)	+= hi6421-pmic-core.o
+obj-$(CONFIG_MFD_SKY81452)		+= sky81452.o
 
 intel-soc-pmic-objs		:= intel_soc_pmic_core.o intel_soc_pmic_crc.o
 obj-$(CONFIG_INTEL_SOC_PMIC)	+= intel-soc-pmic.o
diff --git a/drivers/mfd/sky81452.c b/drivers/mfd/sky81452.c
new file mode 100644
index 0000000..b0c9b04
--- /dev/null
+++ b/drivers/mfd/sky81452.c
@@ -0,0 +1,108 @@
+/*
+ * sky81452.c	SKY81452 MFD driver
+ *
+ * Copyright 2014 Skyworks Solutions Inc.
+ * Author : Gyungoh Yoo <jack.yoo-tjhQNA90jdKqndwCJWfcng@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/sky81452.h>
+
+static const struct regmap_config sky81452_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static int sky81452_probe(struct i2c_client *client,
+				const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	const struct sky81452_platform_data *pdata = dev_get_platdata(dev);
+	struct mfd_cell cells[2];
+	struct regmap *regmap;
+	int ret;
+
+	if (!pdata) {
+		pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+		if (!pdata)
+			return -ENOMEM;
+	}
+
+	regmap = devm_regmap_init_i2c(client, &sky81452_config);
+	if (IS_ERR(regmap)) {
+		dev_err(dev, "failed to initialize.err=%ld\n", PTR_ERR(regmap));
+		return PTR_ERR(regmap);
+	}
+
+	i2c_set_clientdata(client, regmap);
+
+	memset(cells, 0, sizeof(cells));
+	cells[0].name = "sky81452-backlight";
+	cells[0].of_compatible = "skyworks,sky81452-backlight";
+	cells[0].platform_data = pdata->bl_pdata;
+	cells[0].pdata_size = sizeof(*pdata->bl_pdata);
+	cells[1].name = "sky81452-regulator";
+	cells[1].platform_data = pdata->regulator_init_data;
+	cells[1].pdata_size = sizeof(*pdata->regulator_init_data);
+
+	ret = mfd_add_devices(dev, -1, cells, ARRAY_SIZE(cells), NULL, 0, NULL);
+	if (ret)
+		dev_err(dev, "failed to add child devices. err=%d\n", ret);
+
+	return ret;
+}
+
+static int sky81452_remove(struct i2c_client *client)
+{
+	mfd_remove_devices(&client->dev);
+	return 0;
+}
+
+static const struct i2c_device_id sky81452_ids[] = {
+	{ "sky81452" },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, sky81452_ids);
+
+#ifdef CONFIG_OF
+static const struct of_device_id sky81452_of_match[] = {
+	{ .compatible = "skyworks,sky81452", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sky81452_of_match);
+#endif
+
+static struct i2c_driver sky81452_driver = {
+	.driver = {
+		.name = "sky81452",
+		.of_match_table = of_match_ptr(sky81452_of_match),
+	},
+	.probe = sky81452_probe,
+	.remove = sky81452_remove,
+	.id_table = sky81452_ids,
+};
+
+module_i2c_driver(sky81452_driver);
+
+MODULE_DESCRIPTION("Skyworks SKY81452 MFD driver");
+MODULE_AUTHOR("Gyungoh Yoo <jack.yoo-tjhQNA90jdKqndwCJWfcng@public.gmane.org>");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mfd/sky81452.h b/include/linux/mfd/sky81452.h
new file mode 100644
index 0000000..b0925fa
--- /dev/null
+++ b/include/linux/mfd/sky81452.h
@@ -0,0 +1,31 @@
+/*
+ * sky81452.h	SKY81452 MFD driver
+ *
+ * Copyright 2014 Skyworks Solutions Inc.
+ * Author : Gyungoh Yoo <jack.yoo-tjhQNA90jdKqndwCJWfcng@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _SKY81452_H
+#define _SKY81452_H
+
+#include <linux/platform_data/sky81452-backlight.h>
+#include <linux/regulator/machine.h>
+
+struct sky81452_platform_data {
+	struct sky81452_bl_platform_data *bl_pdata;
+	struct regulator_init_data *regulator_init_data;
+};
+
+#endif
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v10 2/6] backlight: Add support Skyworks SKY81452 backlight driver

[gyungoh]

From: Gyungoh Yoo <jack.yoo@skyworksinc.com>

Signed-off-by: Gyungoh Yoo <jack.yoo@skyworksinc.com>
---
Changes v10:
Removed trivial get_brightness implementations

Changes v9:
Nothing

Changes v8:
Renamed property names for backlight with vendor prefix
Modified gpio-enable property to generic property for GPIO

Changes v7:
Modified licensing text to GPLv2

Changes v6:
Added new line character at the end of line of dev_err()

Changes v5:
Move sky81452-backlight.h to include/linux/platform_data

Changes v4:
Reordering header files for readability
Removed calling to backlight_device_unregister()
Removed MODULE_VERSION()
Modified license to GPLv2

Changes v3:
Modified DBG messages

Changes v2:
Added 'compatible' attribute in the driver
Added message for exception or errors

 drivers/video/backlight/Kconfig                  |  10 +
 drivers/video/backlight/Makefile                 |   1 +
 drivers/video/backlight/sky81452-backlight.c     | 334 +++++++++++++++++++++++
 include/linux/platform_data/sky81452-backlight.h |  46 ++++
 4 files changed, 391 insertions(+)
 create mode 100644 drivers/video/backlight/sky81452-backlight.c
 create mode 100644 include/linux/platform_data/sky81452-backlight.h

diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 8d03924..2586fdd 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -409,6 +409,16 @@ config BACKLIGHT_PANDORA
 	  If you have a Pandora console, say Y to enable the
 	  backlight driver.
 
+config BACKLIGHT_SKY81452
+	tristate "Backlight driver for SKY81452"
+	depends on BACKLIGHT_CLASS_DEVICE && MFD_SKY81452
+	help
+	  If you have a Skyworks SKY81452, say Y to enable the
+	  backlight driver.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called sky81452-backlight
+
 config BACKLIGHT_TPS65217
 	tristate "TPS65217 Backlight"
 	depends on BACKLIGHT_CLASS_DEVICE && MFD_TPS65217
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index fcd50b73..d67073f 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -50,6 +50,7 @@ obj-$(CONFIG_BACKLIGHT_PANDORA)		+= pandora_bl.o
 obj-$(CONFIG_BACKLIGHT_PCF50633)	+= pcf50633-backlight.o
 obj-$(CONFIG_BACKLIGHT_PWM)		+= pwm_bl.o
 obj-$(CONFIG_BACKLIGHT_SAHARA)		+= kb3886_bl.o
+obj-$(CONFIG_BACKLIGHT_SKY81452)	+= sky81452-backlight.o
 obj-$(CONFIG_BACKLIGHT_TOSA)		+= tosa_bl.o
 obj-$(CONFIG_BACKLIGHT_TPS65217)	+= tps65217_bl.o
 obj-$(CONFIG_BACKLIGHT_WM831X)		+= wm831x_bl.o
diff --git a/drivers/video/backlight/sky81452-backlight.c b/drivers/video/backlight/sky81452-backlight.c
new file mode 100644
index 0000000..8105597
--- /dev/null
+++ b/drivers/video/backlight/sky81452-backlight.c
@@ -0,0 +1,334 @@
+/*
+ * sky81452-backlight.c	SKY81452 backlight driver
+ *
+ * Copyright 2014 Skyworks Solutions Inc.
+ * Author : Gyungoh Yoo <jack.yoo@skyworksinc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/backlight.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/platform_data/sky81452-backlight.h>
+#include <linux/slab.h>
+
+/* registers */
+#define SKY81452_REG0	0x00
+#define SKY81452_REG1	0x01
+#define SKY81452_REG2	0x02
+#define SKY81452_REG4	0x04
+#define SKY81452_REG5	0x05
+
+/* bit mask */
+#define SKY81452_CS	0xFF
+#define SKY81452_EN	0x3F
+#define SKY81452_IGPW	0x20
+#define SKY81452_PWMMD	0x10
+#define SKY81452_PHASE	0x08
+#define SKY81452_ILIM	0x04
+#define SKY81452_VSHRT	0x03
+#define SKY81452_OCP	0x80
+#define SKY81452_OTMP	0x40
+#define SKY81452_SHRT	0x3F
+#define SKY81452_OPN	0x3F
+
+#define SKY81452_DEFAULT_NAME "lcd-backlight"
+#define SKY81452_MAX_BRIGHTNESS	(SKY81452_CS + 1)
+
+#define CTZ(b) __builtin_ctz(b)
+
+static int sky81452_bl_update_status(struct backlight_device *bd)
+{
+	const struct sky81452_bl_platform_data *pdata =
+			dev_get_platdata(bd->dev.parent);
+	const unsigned int brightness = (unsigned int)bd->props.brightness;
+	struct regmap *regmap = bl_get_data(bd);
+	int ret;
+
+	if (brightness > 0) {
+		ret = regmap_write(regmap, SKY81452_REG0, brightness - 1);
+		if (IS_ERR_VALUE(ret))
+			return ret;
+
+		return regmap_update_bits(regmap, SKY81452_REG1, SKY81452_EN,
+					pdata->enable << CTZ(SKY81452_EN));
+	}
+
+	return regmap_update_bits(regmap, SKY81452_REG1, SKY81452_EN, 0);
+}
+
+static const struct backlight_ops sky81452_bl_ops = {
+	.update_status = sky81452_bl_update_status,
+};
+
+static ssize_t sky81452_bl_store_enable(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct regmap *regmap = bl_get_data(to_backlight_device(dev));
+	unsigned long value;
+	int ret;
+
+	ret = kstrtoul(buf, 16, &value);
+	if (IS_ERR_VALUE(ret))
+		return ret;
+
+	ret = regmap_update_bits(regmap, SKY81452_REG1, SKY81452_EN,
+					value << CTZ(SKY81452_EN));
+	if (IS_ERR_VALUE(ret))
+		return ret;
+
+	return count;
+}
+
+static ssize_t sky81452_bl_show_open_short(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct regmap *regmap = bl_get_data(to_backlight_device(dev));
+	unsigned int reg, value = 0;
+	char tmp[3];
+	int i, ret;
+
+	reg = !strcmp(attr->attr.name, "open") ? SKY81452_REG5 : SKY81452_REG4;
+	ret = regmap_read(regmap, reg, &value);
+	if (IS_ERR_VALUE(ret))
+		return ret;
+
+	if (value & SKY81452_SHRT) {
+		*buf = 0;
+		for (i = 0; i < 6; i++) {
+			if (value & 0x01) {
+				sprintf(tmp, "%d ", i + 1);
+				strcat(buf, tmp);
+			}
+			value >>= 1;
+		}
+		strcat(buf, "\n");
+	} else {
+		strcpy(buf, "none\n");
+	}
+
+	return strlen(buf);
+}
+
+static ssize_t sky81452_bl_show_fault(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct regmap *regmap = bl_get_data(to_backlight_device(dev));
+	unsigned int value = 0;
+	int ret;
+
+	ret = regmap_read(regmap, SKY81452_REG4, &value);
+	if (IS_ERR_VALUE(ret))
+		return ret;
+
+	*buf = 0;
+
+	if (value & SKY81452_OCP)
+		strcat(buf, "over-current ");
+
+	if (value & SKY81452_OTMP)
+		strcat(buf, "over-temperature");
+
+	strcat(buf, "\n");
+	return strlen(buf);
+}
+
+static DEVICE_ATTR(enable, S_IWGRP | S_IWUSR, NULL, sky81452_bl_store_enable);
+static DEVICE_ATTR(open, S_IRUGO, sky81452_bl_show_open_short, NULL);
+static DEVICE_ATTR(short, S_IRUGO, sky81452_bl_show_open_short, NULL);
+static DEVICE_ATTR(fault, S_IRUGO, sky81452_bl_show_fault, NULL);
+
+static struct attribute *sky81452_bl_attribute[] = {
+	&dev_attr_enable.attr,
+	&dev_attr_open.attr,
+	&dev_attr_short.attr,
+	&dev_attr_fault.attr,
+	NULL
+};
+
+static const struct attribute_group sky81452_bl_attr_group = {
+	.attrs = sky81452_bl_attribute,
+};
+
+#ifdef CONFIG_OF
+static struct sky81452_bl_platform_data *sky81452_bl_parse_dt(
+							struct device *dev)
+{
+	struct device_node *np = of_node_get(dev->of_node);
+	struct sky81452_bl_platform_data *pdata;
+	int ret;
+
+	if (!np) {
+		dev_err(dev, "backlight node not found.\n");
+		return ERR_PTR(-ENODATA);
+	}
+
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata) {
+		of_node_put(np);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	of_property_read_string(np, "name", &pdata->name);
+	pdata->ignore_pwm = of_property_read_bool(np, "skyworks,ignore-pwm");
+	pdata->dpwm_mode = of_property_read_bool(np, "skyworks,dpwm-mode");
+	pdata->phase_shift = of_property_read_bool(np, "skyworks,phase-shift");
+	pdata->gpio_enable = of_get_gpio(np, 0);
+
+	ret = of_property_read_u32(np, "skyworks,en-channels", &pdata->enable);
+	if (IS_ERR_VALUE(ret))
+		pdata->enable = SKY81452_EN >> CTZ(SKY81452_EN);
+
+	ret = of_property_read_u32(np, "skyworks,short-detection-threshold",
+			&pdata->short_detection_threshold);
+	if (IS_ERR_VALUE(ret))
+		pdata->short_detection_threshold = 7;
+
+	ret = of_property_read_u32(np, "skyworks,current-limit",
+			&pdata->boost_current_limit);
+	if (IS_ERR_VALUE(ret))
+		pdata->boost_current_limit = 2750;
+
+	of_node_put(np);
+	return pdata;
+}
+#else
+static struct sky81452_bl_platform_data *sky81452_bl_parse_dt(
+							struct device *dev)
+{
+	return ERR_PTR(-EINVAL);
+}
+#endif
+
+static int sky81452_bl_init_device(struct regmap *regmap,
+		struct sky81452_bl_platform_data *pdata)
+{
+	unsigned int value;
+
+	value = pdata->ignore_pwm ? SKY81452_IGPW : 0;
+	value |= pdata->dpwm_mode ? SKY81452_PWMMD : 0;
+	value |= pdata->phase_shift ? 0 : SKY81452_PHASE;
+
+	if (pdata->boost_current_limit == 2300)
+		value |= SKY81452_ILIM;
+	else if (pdata->boost_current_limit != 2750)
+		return -EINVAL;
+
+	if (pdata->short_detection_threshold < 4 ||
+				pdata->short_detection_threshold > 7)
+		return -EINVAL;
+	value |= (7 - pdata->short_detection_threshold) << CTZ(SKY81452_VSHRT);
+
+	return regmap_write(regmap, SKY81452_REG2, value);
+}
+
+static int sky81452_bl_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct regmap *regmap = dev_get_drvdata(dev->parent);
+	struct sky81452_bl_platform_data *pdata = dev_get_platdata(dev);
+	struct backlight_device *bd;
+	struct backlight_properties props;
+	const char *name;
+	int ret;
+
+	if (!pdata) {
+		pdata = sky81452_bl_parse_dt(dev);
+		if (IS_ERR(pdata))
+			return PTR_ERR(pdata);
+	}
+
+	if (gpio_is_valid(pdata->gpio_enable)) {
+		ret = devm_gpio_request_one(dev, pdata->gpio_enable,
+					GPIOF_OUT_INIT_HIGH, "sky81452-en");
+		if (IS_ERR_VALUE(ret)) {
+			dev_err(dev, "failed to request GPIO. err=%d\n", ret);
+			return ret;
+		}
+	}
+
+	ret = sky81452_bl_init_device(regmap, pdata);
+	if (IS_ERR_VALUE(ret)) {
+		dev_err(dev, "failed to initialize. err=%d\n", ret);
+		return ret;
+	}
+
+	memset(&props, 0, sizeof(props));
+	props.max_brightness = SKY81452_MAX_BRIGHTNESS,
+	name = pdata->name ? pdata->name : SKY81452_DEFAULT_NAME;
+	bd = devm_backlight_device_register(dev, name, dev, regmap,
+						&sky81452_bl_ops, &props);
+	if (IS_ERR(bd)) {
+		dev_err(dev, "failed to register. err=%ld\n", PTR_ERR(bd));
+		return PTR_ERR(bd);
+	}
+
+	platform_set_drvdata(pdev, bd);
+
+	ret  = sysfs_create_group(&bd->dev.kobj, &sky81452_bl_attr_group);
+	if (IS_ERR_VALUE(ret)) {
+		dev_err(dev, "failed to create attribute. err=%d\n", ret);
+		return ret;
+	}
+
+	return ret;
+}
+
+static int sky81452_bl_remove(struct platform_device *pdev)
+{
+	const struct sky81452_bl_platform_data *pdata =
+						dev_get_platdata(&pdev->dev);
+	struct backlight_device *bd = platform_get_drvdata(pdev);
+
+	sysfs_remove_group(&bd->dev.kobj, &sky81452_bl_attr_group);
+
+	bd->props.power = FB_BLANK_UNBLANK;
+	bd->props.brightness = 0;
+	backlight_update_status(bd);
+
+	if (gpio_is_valid(pdata->gpio_enable))
+		gpio_set_value_cansleep(pdata->gpio_enable, 0);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id sky81452_bl_of_match[] = {
+	{ .compatible = "skyworks,sky81452-backlight", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sky81452_bl_of_match);
+#endif
+
+static struct platform_driver sky81452_bl_driver = {
+	.driver = {
+		.name = "sky81452-backlight",
+		.of_match_table = of_match_ptr(sky81452_bl_of_match),
+	},
+	.probe = sky81452_bl_probe,
+	.remove = sky81452_bl_remove,
+};
+
+module_platform_driver(sky81452_bl_driver);
+
+MODULE_DESCRIPTION("Skyworks SKY81452 backlight driver");
+MODULE_AUTHOR("Gyungoh Yoo <jack.yoo@skyworksinc.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/platform_data/sky81452-backlight.h b/include/linux/platform_data/sky81452-backlight.h
new file mode 100644
index 0000000..1231e9b
--- /dev/null
+++ b/include/linux/platform_data/sky81452-backlight.h
@@ -0,0 +1,46 @@
+/*
+ * sky81452.h	SKY81452 backlight driver
+ *
+ * Copyright 2014 Skyworks Solutions Inc.
+ * Author : Gyungoh Yoo <jack.yoo@skyworksinc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _SKY81452_BACKLIGHT_H
+#define _SKY81452_BACKLIGHT_H
+
+/**
+ * struct sky81452_platform_data
+ * @name:	backlight driver name.
+		If it is not defined, default name is lcd-backlight.
+ * @gpio_enable:GPIO number which control EN pin
+ * @enable:	Enable mask for current sink channel 1, 2, 3, 4, 5 and 6.
+ * @ignore_pwm:	true if DPWMI should be ignored.
+ * @dpwm_mode:	true is DPWM dimming mode, otherwise Analog dimming mode.
+ * @phase_shift:true is phase shift mode.
+ * @short_detecion_threshold:	It should be one of 4, 5, 6 and 7V.
+ * @boost_current_limit:	It should be one of 2300, 2750mA.
+ */
+struct sky81452_bl_platform_data {
+	const char *name;
+	int gpio_enable;
+	unsigned int enable;
+	bool ignore_pwm;
+	bool dpwm_mode;
+	bool phase_shift;
+	unsigned int short_detection_threshold;
+	unsigned int boost_current_limit;
+};
+
+#endif
-- 
1.9.1

[PATCH v10 3/6] devicetree: mfd: Add new SKY81452 mfd binding

[gyungoh]

From: Gyungoh Yoo <jack.yoo@skyworksinc.com>

Signed-off-by: Gyungoh Yoo <jack.yoo@skyworksinc.com>
---
Changes v10:
Nothing

Changes v9:
Nothing

Changes v8:
Made up the example for backlight DT

Changes v7:
Nothing

Changes v6:
Nothing

Changes v5:
Changed DT for regulator : 'lout' node should be defined under 'regulator'
Removed compatible string from sky81452-regulator driver

Changes v4:
Nothing

Changes v3:
Nothing

Changes v2:
Added reg attribute for I2C slave address

 Documentation/devicetree/bindings/mfd/sky81452.txt | 36 ++++++++++++++++++++++
 1 file changed, 36 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/sky81452.txt

diff --git a/Documentation/devicetree/bindings/mfd/sky81452.txt b/Documentation/devicetree/bindings/mfd/sky81452.txt
new file mode 100644
index 0000000..ab71473
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/sky81452.txt
@@ -0,0 +1,36 @@
+SKY81452 bindings
+
+Required properties:
+- compatible	: Must be "skyworks,sky81452"
+- reg		: I2C slave address
+
+Required child nodes:
+- backlight	: container node for backlight following the binding
+		in video/backlight/sky81452-backlight.txt
+- regulator	: container node for regulators following the binding
+		in regulator/sky81452-regulator.txt
+
+Example:
+
+	sky81452@2c {
+		compatible = "skyworks,sky81452";
+		reg = <0x2c>;
+
+		backlight {
+			compatible = "skyworks,sky81452-backlight";
+			name = "pwm-backlight";
+			skyworks,en-channels = <0x3f>;
+			skyworks,ignore-pwm;
+			skyworks,phase-shift;
+			skyworks,ovp-level = <20>;
+			skyworks,current-limit = <2300>;
+		};
+
+		regulator {
+			lout {
+				regulator-name = "sky81452-lout";
+				regulator-min-microvolt = <4500000>;
+				regulator-max-microvolt = <8000000>;
+			};
+		};
+	};
-- 
1.9.1

[PATCH v10 4/6] devicetree: backlight: Add new SKY81452 backlight binding

[gyungoh]

From: Gyungoh Yoo <jack.yoo@skyworksinc.com>

Signed-off-by: Gyungoh Yoo <jack.yoo@skyworksinc.com>
Acked-by: Bryan Wu <cooloney@gmail.com>
---
Changes v10:
Nothing

Changes v9:
Nothing

Changes v8:
Renamed property names for backlight with vendor prefix
Modified gpio-enable property to generic property for GPIO
Made up the example for backlight DT

Changes v7:
Nothing

Changes v6:
Nothing

Changes v5:
Nothing

Changes v4:
Nothing

Changes v3:
Nothing

Changes v2:
Added reg attribute for I2C slave address

 .../video/backlight/sky81452-backlight.txt         | 29 ++++++++++++++++++++++
 1 file changed, 29 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt

diff --git a/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt b/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt
new file mode 100644
index 0000000..8daebf5
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt
@@ -0,0 +1,29 @@
+SKY81452-backlight bindings
+
+Required properties:
+- compatible		: Must be "skyworks,sky81452-backlight"
+
+Optional properties:
+- name			: Name of backlight device. Default is 'lcd-backlight'.
+- gpios			: GPIO to use to EN pin.
+			See Documentation/devicetree/bindings/gpio/gpio.txt
+- skyworks,en-channels	: Enable mask for current sink channel 1 to 6.
+- skyworks,ignore-pwm	: Ignore both PWM input
+- skyworks,dpwm-mode	: Enable DPWM dimming mode, otherwise Analog dimming.
+- skyworks,phase-shift	: Enable phase shift mode
+- skyworks,ovp-level	: Over-voltage protection level.
+			Should be between 14 or 28V.
+- skyworks,short-detection-threshold	: It should be one of 4, 5, 6 and 7V.
+- skyworks,current-limit	: It should be 2300mA or 2750mA.
+
+Example:
+
+	backlight {
+		compatible = "skyworks,sky81452-backlight";
+		name = "pwm-backlight";
+		skyworks,en-channels = <0x3f>;
+		skyworks,ignore-pwm;
+		skyworks,phase-shift;
+		skyworks,ovp-level = <20>;
+		skyworks,current-limit = <2300>;
+	};
-- 
1.9.1

[PATCH v10 5/6] devicetree: Add vendor prefix for Skyworks Solutions, Inc.

[gyungoh]

From: Gyungoh Yoo <jack.yoo@skyworksinc.com>

Signed-off-by: Gyungoh Yoo <jack.yoo@skyworksinc.com>
---
Changes v10:
Nothing

Changes v9:
Nothing

Changes v8:
Nothing

Changes v7:
Nothing

Changes v6:
Nothing

Changes v5:
Nothing

Changes v4:
Nothing

Changes v3:
Nothing

Changes v2:
Added vendor prefix for Skyworks Solutions, Inc.

 Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index a344ec2..68143f0 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -140,6 +140,7 @@ sii	Seiko Instruments, Inc.
 silergy	Silergy Corp.
 sirf	SiRF Technology, Inc.
 sitronix	Sitronix Technology Corporation
+skyworks	Skyworks Solutions, Inc.
 smsc	Standard Microsystems Corporation
 snps	Synopsys, Inc.
 solidrun	SolidRun
-- 
1.9.1

[PATCH v10 6/6] devicetree: i2c: Add SKY81452 to the Trivial Devices list

[gyungoh]

From: Gyungoh Yoo <jack.yoo@skyworksinc.com>

Signed-off-by: Gyungoh Yoo <jack.yoo@skyworksinc.com>
---
Changes v10:
Nothing

Changes v9:
Nothing

Changes v8:
Nothing

Changes v7:
Nothing

Changes v6:
Nothing

Changes v5:
Nothing

Changes v4:
Nothing

Changes v3:
Nothing

Changes v2:
Add SKY81452 to the Trivial Devices list

 Documentation/devicetree/bindings/i2c/trivial-devices.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
index fbde415..122fa1e 100644
--- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt
+++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
@@ -77,6 +77,7 @@ ramtron,24c64		i2c serial eeprom  (24cxx)
 ricoh,rs5c372a		I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
 samsung,24ad0xd1	S524AD0XF1 (128K/256K-bit Serial EEPROM for Low Power)
 sii,s35390a		2-wire CMOS real-time clock
+skyworks,sky81452	Skyworks SKY81452: Six-Channel White LED Driver with Touch Panel Bias Supply
 st-micro,24c256		i2c serial eeprom  (24cxx)
 stm,m41t00		Serial Access TIMEKEEPER
 stm,m41t62		Serial real-time clock (RTC) with alarm
-- 
1.9.1

Re: [PATCH v10 2/6] backlight: Add support Skyworks SKY81452 backlight driver

[Jingoo Han]

On Thursday, December 18, 2014 2:48 PM, Gyungoh Yoo wrote:
> 
> From: Gyungoh Yoo <jack.yoo-tjhQNA90jdKqndwCJWfcng@public.gmane.org>
> 
> Signed-off-by: Gyungoh Yoo <jack.yoo-tjhQNA90jdKqndwCJWfcng@public.gmane.org>

Please add the following 'Acked-by's when you send this patch
next time.

Acked-by: Jingoo Han <jg1.han-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Acked-by: Bryan Wu <cooloney-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

Best regards,
Jingoo Han

> ---
> Changes v10:
> Removed trivial get_brightness implementations
> 
> Changes v9:
> Nothing
> 
> Changes v8:
> Renamed property names for backlight with vendor prefix
> Modified gpio-enable property to generic property for GPIO
> 
> Changes v7:
> Modified licensing text to GPLv2
> 
> Changes v6:
> Added new line character at the end of line of dev_err()
> 
> Changes v5:
> Move sky81452-backlight.h to include/linux/platform_data
> 
> Changes v4:
> Reordering header files for readability
> Removed calling to backlight_device_unregister()
> Removed MODULE_VERSION()
> Modified license to GPLv2
> 
> Changes v3:
> Modified DBG messages
> 
> Changes v2:
> Added 'compatible' attribute in the driver
> Added message for exception or errors
> 
>  drivers/video/backlight/Kconfig                  |  10 +
>  drivers/video/backlight/Makefile                 |   1 +
>  drivers/video/backlight/sky81452-backlight.c     | 334 +++++++++++++++++++++++
>  include/linux/platform_data/sky81452-backlight.h |  46 ++++
>  4 files changed, 391 insertions(+)
>  create mode 100644 drivers/video/backlight/sky81452-backlight.c
>  create mode 100644 include/linux/platform_data/sky81452-backlight.h
> 
> diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
> index 8d03924..2586fdd 100644
> --- a/drivers/video/backlight/Kconfig
> +++ b/drivers/video/backlight/Kconfig
> @@ -409,6 +409,16 @@ config BACKLIGHT_PANDORA
>  	  If you have a Pandora console, say Y to enable the
>  	  backlight driver.
> 
> +config BACKLIGHT_SKY81452
> +	tristate "Backlight driver for SKY81452"
> +	depends on BACKLIGHT_CLASS_DEVICE && MFD_SKY81452
> +	help
> +	  If you have a Skyworks SKY81452, say Y to enable the
> +	  backlight driver.
> +
> +	  To compile this driver as a module, choose M here: the module will
> +	  be called sky81452-backlight
> +
>  config BACKLIGHT_TPS65217
>  	tristate "TPS65217 Backlight"
>  	depends on BACKLIGHT_CLASS_DEVICE && MFD_TPS65217
> diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
> index fcd50b73..d67073f 100644
> --- a/drivers/video/backlight/Makefile
> +++ b/drivers/video/backlight/Makefile
> @@ -50,6 +50,7 @@ obj-$(CONFIG_BACKLIGHT_PANDORA)		+= pandora_bl.o
>  obj-$(CONFIG_BACKLIGHT_PCF50633)	+= pcf50633-backlight.o
>  obj-$(CONFIG_BACKLIGHT_PWM)		+= pwm_bl.o
>  obj-$(CONFIG_BACKLIGHT_SAHARA)		+= kb3886_bl.o
> +obj-$(CONFIG_BACKLIGHT_SKY81452)	+= sky81452-backlight.o
>  obj-$(CONFIG_BACKLIGHT_TOSA)		+= tosa_bl.o
>  obj-$(CONFIG_BACKLIGHT_TPS65217)	+= tps65217_bl.o
>  obj-$(CONFIG_BACKLIGHT_WM831X)		+= wm831x_bl.o
> diff --git a/drivers/video/backlight/sky81452-backlight.c b/drivers/video/backlight/sky81452-
> backlight.c
> new file mode 100644
> index 0000000..8105597
> --- /dev/null
> +++ b/drivers/video/backlight/sky81452-backlight.c
> @@ -0,0 +1,334 @@
> +/*
> + * sky81452-backlight.c	SKY81452 backlight driver
> + *
> + * Copyright 2014 Skyworks Solutions Inc.
> + * Author : Gyungoh Yoo <jack.yoo-tjhQNA90jdKqndwCJWfcng@public.gmane.org>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2
> + * as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
> + * General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License along
> + * with this program; if not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <linux/backlight.h>
> +#include <linux/err.h>
> +#include <linux/gpio.h>
> +#include <linux/init.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_gpio.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/platform_data/sky81452-backlight.h>
> +#include <linux/slab.h>
> +
> +/* registers */
> +#define SKY81452_REG0	0x00
> +#define SKY81452_REG1	0x01
> +#define SKY81452_REG2	0x02
> +#define SKY81452_REG4	0x04
> +#define SKY81452_REG5	0x05
> +
> +/* bit mask */
> +#define SKY81452_CS	0xFF
> +#define SKY81452_EN	0x3F
> +#define SKY81452_IGPW	0x20
> +#define SKY81452_PWMMD	0x10
> +#define SKY81452_PHASE	0x08
> +#define SKY81452_ILIM	0x04
> +#define SKY81452_VSHRT	0x03
> +#define SKY81452_OCP	0x80
> +#define SKY81452_OTMP	0x40
> +#define SKY81452_SHRT	0x3F
> +#define SKY81452_OPN	0x3F
> +
> +#define SKY81452_DEFAULT_NAME "lcd-backlight"
> +#define SKY81452_MAX_BRIGHTNESS	(SKY81452_CS + 1)
> +
> +#define CTZ(b) __builtin_ctz(b)
> +
> +static int sky81452_bl_update_status(struct backlight_device *bd)
> +{
> +	const struct sky81452_bl_platform_data *pdata =
> +			dev_get_platdata(bd->dev.parent);
> +	const unsigned int brightness = (unsigned int)bd->props.brightness;
> +	struct regmap *regmap = bl_get_data(bd);
> +	int ret;
> +
> +	if (brightness > 0) {
> +		ret = regmap_write(regmap, SKY81452_REG0, brightness - 1);
> +		if (IS_ERR_VALUE(ret))
> +			return ret;
> +
> +		return regmap_update_bits(regmap, SKY81452_REG1, SKY81452_EN,
> +					pdata->enable << CTZ(SKY81452_EN));
> +	}
> +
> +	return regmap_update_bits(regmap, SKY81452_REG1, SKY81452_EN, 0);
> +}
> +
> +static const struct backlight_ops sky81452_bl_ops = {
> +	.update_status = sky81452_bl_update_status,
> +};
> +
> +static ssize_t sky81452_bl_store_enable(struct device *dev,
> +		struct device_attribute *attr, const char *buf, size_t count)
> +{
> +	struct regmap *regmap = bl_get_data(to_backlight_device(dev));
> +	unsigned long value;
> +	int ret;
> +
> +	ret = kstrtoul(buf, 16, &value);
> +	if (IS_ERR_VALUE(ret))
> +		return ret;
> +
> +	ret = regmap_update_bits(regmap, SKY81452_REG1, SKY81452_EN,
> +					value << CTZ(SKY81452_EN));
> +	if (IS_ERR_VALUE(ret))
> +		return ret;
> +
> +	return count;
> +}
> +
> +static ssize_t sky81452_bl_show_open_short(struct device *dev,
> +		struct device_attribute *attr, char *buf)
> +{
> +	struct regmap *regmap = bl_get_data(to_backlight_device(dev));
> +	unsigned int reg, value = 0;
> +	char tmp[3];
> +	int i, ret;
> +
> +	reg = !strcmp(attr->attr.name, "open") ? SKY81452_REG5 : SKY81452_REG4;
> +	ret = regmap_read(regmap, reg, &value);
> +	if (IS_ERR_VALUE(ret))
> +		return ret;
> +
> +	if (value & SKY81452_SHRT) {
> +		*buf = 0;
> +		for (i = 0; i < 6; i++) {
> +			if (value & 0x01) {
> +				sprintf(tmp, "%d ", i + 1);
> +				strcat(buf, tmp);
> +			}
> +			value >>= 1;
> +		}
> +		strcat(buf, "\n");
> +	} else {
> +		strcpy(buf, "none\n");
> +	}
> +
> +	return strlen(buf);
> +}
> +
> +static ssize_t sky81452_bl_show_fault(struct device *dev,
> +		struct device_attribute *attr, char *buf)
> +{
> +	struct regmap *regmap = bl_get_data(to_backlight_device(dev));
> +	unsigned int value = 0;
> +	int ret;
> +
> +	ret = regmap_read(regmap, SKY81452_REG4, &value);
> +	if (IS_ERR_VALUE(ret))
> +		return ret;
> +
> +	*buf = 0;
> +
> +	if (value & SKY81452_OCP)
> +		strcat(buf, "over-current ");
> +
> +	if (value & SKY81452_OTMP)
> +		strcat(buf, "over-temperature");
> +
> +	strcat(buf, "\n");
> +	return strlen(buf);
> +}
> +
> +static DEVICE_ATTR(enable, S_IWGRP | S_IWUSR, NULL, sky81452_bl_store_enable);
> +static DEVICE_ATTR(open, S_IRUGO, sky81452_bl_show_open_short, NULL);
> +static DEVICE_ATTR(short, S_IRUGO, sky81452_bl_show_open_short, NULL);
> +static DEVICE_ATTR(fault, S_IRUGO, sky81452_bl_show_fault, NULL);
> +
> +static struct attribute *sky81452_bl_attribute[] = {
> +	&dev_attr_enable.attr,
> +	&dev_attr_open.attr,
> +	&dev_attr_short.attr,
> +	&dev_attr_fault.attr,
> +	NULL
> +};
> +
> +static const struct attribute_group sky81452_bl_attr_group = {
> +	.attrs = sky81452_bl_attribute,
> +};
> +
> +#ifdef CONFIG_OF
> +static struct sky81452_bl_platform_data *sky81452_bl_parse_dt(
> +							struct device *dev)
> +{
> +	struct device_node *np = of_node_get(dev->of_node);
> +	struct sky81452_bl_platform_data *pdata;
> +	int ret;
> +
> +	if (!np) {
> +		dev_err(dev, "backlight node not found.\n");
> +		return ERR_PTR(-ENODATA);
> +	}
> +
> +	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
> +	if (!pdata) {
> +		of_node_put(np);
> +		return ERR_PTR(-ENOMEM);
> +	}
> +
> +	of_property_read_string(np, "name", &pdata->name);
> +	pdata->ignore_pwm = of_property_read_bool(np, "skyworks,ignore-pwm");
> +	pdata->dpwm_mode = of_property_read_bool(np, "skyworks,dpwm-mode");
> +	pdata->phase_shift = of_property_read_bool(np, "skyworks,phase-shift");
> +	pdata->gpio_enable = of_get_gpio(np, 0);
> +
> +	ret = of_property_read_u32(np, "skyworks,en-channels", &pdata->enable);
> +	if (IS_ERR_VALUE(ret))
> +		pdata->enable = SKY81452_EN >> CTZ(SKY81452_EN);
> +
> +	ret = of_property_read_u32(np, "skyworks,short-detection-threshold",
> +			&pdata->short_detection_threshold);
> +	if (IS_ERR_VALUE(ret))
> +		pdata->short_detection_threshold = 7;
> +
> +	ret = of_property_read_u32(np, "skyworks,current-limit",
> +			&pdata->boost_current_limit);
> +	if (IS_ERR_VALUE(ret))
> +		pdata->boost_current_limit = 2750;
> +
> +	of_node_put(np);
> +	return pdata;
> +}
> +#else
> +static struct sky81452_bl_platform_data *sky81452_bl_parse_dt(
> +							struct device *dev)
> +{
> +	return ERR_PTR(-EINVAL);
> +}
> +#endif
> +
> +static int sky81452_bl_init_device(struct regmap *regmap,
> +		struct sky81452_bl_platform_data *pdata)
> +{
> +	unsigned int value;
> +
> +	value = pdata->ignore_pwm ? SKY81452_IGPW : 0;
> +	value |= pdata->dpwm_mode ? SKY81452_PWMMD : 0;
> +	value |= pdata->phase_shift ? 0 : SKY81452_PHASE;
> +
> +	if (pdata->boost_current_limit == 2300)
> +		value |= SKY81452_ILIM;
> +	else if (pdata->boost_current_limit != 2750)
> +		return -EINVAL;
> +
> +	if (pdata->short_detection_threshold < 4 ||
> +				pdata->short_detection_threshold > 7)
> +		return -EINVAL;
> +	value |= (7 - pdata->short_detection_threshold) << CTZ(SKY81452_VSHRT);
> +
> +	return regmap_write(regmap, SKY81452_REG2, value);
> +}
> +
> +static int sky81452_bl_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct regmap *regmap = dev_get_drvdata(dev->parent);
> +	struct sky81452_bl_platform_data *pdata = dev_get_platdata(dev);
> +	struct backlight_device *bd;
> +	struct backlight_properties props;
> +	const char *name;
> +	int ret;
> +
> +	if (!pdata) {
> +		pdata = sky81452_bl_parse_dt(dev);
> +		if (IS_ERR(pdata))
> +			return PTR_ERR(pdata);
> +	}
> +
> +	if (gpio_is_valid(pdata->gpio_enable)) {
> +		ret = devm_gpio_request_one(dev, pdata->gpio_enable,
> +					GPIOF_OUT_INIT_HIGH, "sky81452-en");
> +		if (IS_ERR_VALUE(ret)) {
> +			dev_err(dev, "failed to request GPIO. err=%d\n", ret);
> +			return ret;
> +		}
> +	}
> +
> +	ret = sky81452_bl_init_device(regmap, pdata);
> +	if (IS_ERR_VALUE(ret)) {
> +		dev_err(dev, "failed to initialize. err=%d\n", ret);
> +		return ret;
> +	}
> +
> +	memset(&props, 0, sizeof(props));
> +	props.max_brightness = SKY81452_MAX_BRIGHTNESS,
> +	name = pdata->name ? pdata->name : SKY81452_DEFAULT_NAME;
> +	bd = devm_backlight_device_register(dev, name, dev, regmap,
> +						&sky81452_bl_ops, &props);
> +	if (IS_ERR(bd)) {
> +		dev_err(dev, "failed to register. err=%ld\n", PTR_ERR(bd));
> +		return PTR_ERR(bd);
> +	}
> +
> +	platform_set_drvdata(pdev, bd);
> +
> +	ret  = sysfs_create_group(&bd->dev.kobj, &sky81452_bl_attr_group);
> +	if (IS_ERR_VALUE(ret)) {
> +		dev_err(dev, "failed to create attribute. err=%d\n", ret);
> +		return ret;
> +	}
> +
> +	return ret;
> +}
> +
> +static int sky81452_bl_remove(struct platform_device *pdev)
> +{
> +	const struct sky81452_bl_platform_data *pdata =
> +						dev_get_platdata(&pdev->dev);
> +	struct backlight_device *bd = platform_get_drvdata(pdev);
> +
> +	sysfs_remove_group(&bd->dev.kobj, &sky81452_bl_attr_group);
> +
> +	bd->props.power = FB_BLANK_UNBLANK;
> +	bd->props.brightness = 0;
> +	backlight_update_status(bd);
> +
> +	if (gpio_is_valid(pdata->gpio_enable))
> +		gpio_set_value_cansleep(pdata->gpio_enable, 0);
> +
> +	return 0;
> +}
> +
> +#ifdef CONFIG_OF
> +static const struct of_device_id sky81452_bl_of_match[] = {
> +	{ .compatible = "skyworks,sky81452-backlight", },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, sky81452_bl_of_match);
> +#endif
> +
> +static struct platform_driver sky81452_bl_driver = {
> +	.driver = {
> +		.name = "sky81452-backlight",
> +		.of_match_table = of_match_ptr(sky81452_bl_of_match),
> +	},
> +	.probe = sky81452_bl_probe,
> +	.remove = sky81452_bl_remove,
> +};
> +
> +module_platform_driver(sky81452_bl_driver);
> +
> +MODULE_DESCRIPTION("Skyworks SKY81452 backlight driver");
> +MODULE_AUTHOR("Gyungoh Yoo <jack.yoo-tjhQNA90jdKqndwCJWfcng@public.gmane.org>");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/platform_data/sky81452-backlight.h b/include/linux/platform_data/sky81452-
> backlight.h
> new file mode 100644
> index 0000000..1231e9b
> --- /dev/null
> +++ b/include/linux/platform_data/sky81452-backlight.h
> @@ -0,0 +1,46 @@
> +/*
> + * sky81452.h	SKY81452 backlight driver
> + *
> + * Copyright 2014 Skyworks Solutions Inc.
> + * Author : Gyungoh Yoo <jack.yoo-tjhQNA90jdKqndwCJWfcng@public.gmane.org>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2
> + * as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
> + * General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License along
> + * with this program; if not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#ifndef _SKY81452_BACKLIGHT_H
> +#define _SKY81452_BACKLIGHT_H
> +
> +/**
> + * struct sky81452_platform_data
> + * @name:	backlight driver name.
> +		If it is not defined, default name is lcd-backlight.
> + * @gpio_enable:GPIO number which control EN pin
> + * @enable:	Enable mask for current sink channel 1, 2, 3, 4, 5 and 6.
> + * @ignore_pwm:	true if DPWMI should be ignored.
> + * @dpwm_mode:	true is DPWM dimming mode, otherwise Analog dimming mode.
> + * @phase_shift:true is phase shift mode.
> + * @short_detecion_threshold:	It should be one of 4, 5, 6 and 7V.
> + * @boost_current_limit:	It should be one of 2300, 2750mA.
> + */
> +struct sky81452_bl_platform_data {
> +	const char *name;
> +	int gpio_enable;
> +	unsigned int enable;
> +	bool ignore_pwm;
> +	bool dpwm_mode;
> +	bool phase_shift;
> +	unsigned int short_detection_threshold;
> +	unsigned int boost_current_limit;
> +};
> +
> +#endif
> --
> 1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v10 2/6] backlight: Add support Skyworks SKY81452 backlight driver

[Gyungoh Yoo]

On Thu, Dec 18, 2014 at 03:09:21PM +0900, Jingoo Han wrote:
> On Thursday, December 18, 2014 2:48 PM, Gyungoh Yoo wrote:
> > 
> > From: Gyungoh Yoo <jack.yoo-tjhQNA90jdKqndwCJWfcng@public.gmane.org>
> > 
> > Signed-off-by: Gyungoh Yoo <jack.yoo-tjhQNA90jdKqndwCJWfcng@public.gmane.org>
> 
> Please add the following 'Acked-by's when you send this patch
> next time.
> 
> Acked-by: Jingoo Han <jg1.han-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
> Acked-by: Bryan Wu <cooloney-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

I see.
Thank you.

> 
> Best regards,
> Jingoo Han
> 
> > ---
> > Changes v10:
> > Removed trivial get_brightness implementations
> > 
> > Changes v9:
> > Nothing
> > 
> > Changes v8:
> > Renamed property names for backlight with vendor prefix
> > Modified gpio-enable property to generic property for GPIO
> > 
> > Changes v7:
> > Modified licensing text to GPLv2
> > 
> > Changes v6:
> > Added new line character at the end of line of dev_err()
> > 
> > Changes v5:
> > Move sky81452-backlight.h to include/linux/platform_data
> > 
> > Changes v4:
> > Reordering header files for readability
> > Removed calling to backlight_device_unregister()
> > Removed MODULE_VERSION()
> > Modified license to GPLv2
> > 
> > Changes v3:
> > Modified DBG messages
> > 
> > Changes v2:
> > Added 'compatible' attribute in the driver
> > Added message for exception or errors
> > 
> >  drivers/video/backlight/Kconfig                  |  10 +
> >  drivers/video/backlight/Makefile                 |   1 +
> >  drivers/video/backlight/sky81452-backlight.c     | 334 +++++++++++++++++++++++
> >  include/linux/platform_data/sky81452-backlight.h |  46 ++++
> >  4 files changed, 391 insertions(+)
> >  create mode 100644 drivers/video/backlight/sky81452-backlight.c
> >  create mode 100644 include/linux/platform_data/sky81452-backlight.h
> > 
> > diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
> > index 8d03924..2586fdd 100644
> > --- a/drivers/video/backlight/Kconfig
> > +++ b/drivers/video/backlight/Kconfig
> > @@ -409,6 +409,16 @@ config BACKLIGHT_PANDORA
> >  	  If you have a Pandora console, say Y to enable the
> >  	  backlight driver.
> > 
> > +config BACKLIGHT_SKY81452
> > +	tristate "Backlight driver for SKY81452"
> > +	depends on BACKLIGHT_CLASS_DEVICE && MFD_SKY81452
> > +	help
> > +	  If you have a Skyworks SKY81452, say Y to enable the
> > +	  backlight driver.
> > +
> > +	  To compile this driver as a module, choose M here: the module will
> > +	  be called sky81452-backlight
> > +
> >  config BACKLIGHT_TPS65217
> >  	tristate "TPS65217 Backlight"
> >  	depends on BACKLIGHT_CLASS_DEVICE && MFD_TPS65217
> > diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
> > index fcd50b73..d67073f 100644
> > --- a/drivers/video/backlight/Makefile
> > +++ b/drivers/video/backlight/Makefile
> > @@ -50,6 +50,7 @@ obj-$(CONFIG_BACKLIGHT_PANDORA)		+= pandora_bl.o
> >  obj-$(CONFIG_BACKLIGHT_PCF50633)	+= pcf50633-backlight.o
> >  obj-$(CONFIG_BACKLIGHT_PWM)		+= pwm_bl.o
> >  obj-$(CONFIG_BACKLIGHT_SAHARA)		+= kb3886_bl.o
> > +obj-$(CONFIG_BACKLIGHT_SKY81452)	+= sky81452-backlight.o
> >  obj-$(CONFIG_BACKLIGHT_TOSA)		+= tosa_bl.o
> >  obj-$(CONFIG_BACKLIGHT_TPS65217)	+= tps65217_bl.o
> >  obj-$(CONFIG_BACKLIGHT_WM831X)		+= wm831x_bl.o
> > diff --git a/drivers/video/backlight/sky81452-backlight.c b/drivers/video/backlight/sky81452-
> > backlight.c
> > new file mode 100644
> > index 0000000..8105597
> > --- /dev/null
> > +++ b/drivers/video/backlight/sky81452-backlight.c
> > @@ -0,0 +1,334 @@
> > +/*
> > + * sky81452-backlight.c	SKY81452 backlight driver
> > + *
> > + * Copyright 2014 Skyworks Solutions Inc.
> > + * Author : Gyungoh Yoo <jack.yoo-tjhQNA90jdKqndwCJWfcng@public.gmane.org>
> > + *
> > + * This program is free software; you can redistribute it and/or modify it
> > + * under the terms of the GNU General Public License version 2
> > + * as published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful, but
> > + * WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
> > + * General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public License along
> > + * with this program; if not, see <http://www.gnu.org/licenses/>.
> > + */
> > +
> > +#include <linux/backlight.h>
> > +#include <linux/err.h>
> > +#include <linux/gpio.h>
> > +#include <linux/init.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/of_gpio.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/regmap.h>
> > +#include <linux/platform_data/sky81452-backlight.h>
> > +#include <linux/slab.h>
> > +
> > +/* registers */
> > +#define SKY81452_REG0	0x00
> > +#define SKY81452_REG1	0x01
> > +#define SKY81452_REG2	0x02
> > +#define SKY81452_REG4	0x04
> > +#define SKY81452_REG5	0x05
> > +
> > +/* bit mask */
> > +#define SKY81452_CS	0xFF
> > +#define SKY81452_EN	0x3F
> > +#define SKY81452_IGPW	0x20
> > +#define SKY81452_PWMMD	0x10
> > +#define SKY81452_PHASE	0x08
> > +#define SKY81452_ILIM	0x04
> > +#define SKY81452_VSHRT	0x03
> > +#define SKY81452_OCP	0x80
> > +#define SKY81452_OTMP	0x40
> > +#define SKY81452_SHRT	0x3F
> > +#define SKY81452_OPN	0x3F
> > +
> > +#define SKY81452_DEFAULT_NAME "lcd-backlight"
> > +#define SKY81452_MAX_BRIGHTNESS	(SKY81452_CS + 1)
> > +
> > +#define CTZ(b) __builtin_ctz(b)
> > +
> > +static int sky81452_bl_update_status(struct backlight_device *bd)
> > +{
> > +	const struct sky81452_bl_platform_data *pdata =
> > +			dev_get_platdata(bd->dev.parent);
> > +	const unsigned int brightness = (unsigned int)bd->props.brightness;
> > +	struct regmap *regmap = bl_get_data(bd);
> > +	int ret;
> > +
> > +	if (brightness > 0) {
> > +		ret = regmap_write(regmap, SKY81452_REG0, brightness - 1);
> > +		if (IS_ERR_VALUE(ret))
> > +			return ret;
> > +
> > +		return regmap_update_bits(regmap, SKY81452_REG1, SKY81452_EN,
> > +					pdata->enable << CTZ(SKY81452_EN));
> > +	}
> > +
> > +	return regmap_update_bits(regmap, SKY81452_REG1, SKY81452_EN, 0);
> > +}
> > +
> > +static const struct backlight_ops sky81452_bl_ops = {
> > +	.update_status = sky81452_bl_update_status,
> > +};
> > +
> > +static ssize_t sky81452_bl_store_enable(struct device *dev,
> > +		struct device_attribute *attr, const char *buf, size_t count)
> > +{
> > +	struct regmap *regmap = bl_get_data(to_backlight_device(dev));
> > +	unsigned long value;
> > +	int ret;
> > +
> > +	ret = kstrtoul(buf, 16, &value);
> > +	if (IS_ERR_VALUE(ret))
> > +		return ret;
> > +
> > +	ret = regmap_update_bits(regmap, SKY81452_REG1, SKY81452_EN,
> > +					value << CTZ(SKY81452_EN));
> > +	if (IS_ERR_VALUE(ret))
> > +		return ret;
> > +
> > +	return count;
> > +}
> > +
> > +static ssize_t sky81452_bl_show_open_short(struct device *dev,
> > +		struct device_attribute *attr, char *buf)
> > +{
> > +	struct regmap *regmap = bl_get_data(to_backlight_device(dev));
> > +	unsigned int reg, value = 0;
> > +	char tmp[3];
> > +	int i, ret;
> > +
> > +	reg = !strcmp(attr->attr.name, "open") ? SKY81452_REG5 : SKY81452_REG4;
> > +	ret = regmap_read(regmap, reg, &value);
> > +	if (IS_ERR_VALUE(ret))
> > +		return ret;
> > +
> > +	if (value & SKY81452_SHRT) {
> > +		*buf = 0;
> > +		for (i = 0; i < 6; i++) {
> > +			if (value & 0x01) {
> > +				sprintf(tmp, "%d ", i + 1);
> > +				strcat(buf, tmp);
> > +			}
> > +			value >>= 1;
> > +		}
> > +		strcat(buf, "\n");
> > +	} else {
> > +		strcpy(buf, "none\n");
> > +	}
> > +
> > +	return strlen(buf);
> > +}
> > +
> > +static ssize_t sky81452_bl_show_fault(struct device *dev,
> > +		struct device_attribute *attr, char *buf)
> > +{
> > +	struct regmap *regmap = bl_get_data(to_backlight_device(dev));
> > +	unsigned int value = 0;
> > +	int ret;
> > +
> > +	ret = regmap_read(regmap, SKY81452_REG4, &value);
> > +	if (IS_ERR_VALUE(ret))
> > +		return ret;
> > +
> > +	*buf = 0;
> > +
> > +	if (value & SKY81452_OCP)
> > +		strcat(buf, "over-current ");
> > +
> > +	if (value & SKY81452_OTMP)
> > +		strcat(buf, "over-temperature");
> > +
> > +	strcat(buf, "\n");
> > +	return strlen(buf);
> > +}
> > +
> > +static DEVICE_ATTR(enable, S_IWGRP | S_IWUSR, NULL, sky81452_bl_store_enable);
> > +static DEVICE_ATTR(open, S_IRUGO, sky81452_bl_show_open_short, NULL);
> > +static DEVICE_ATTR(short, S_IRUGO, sky81452_bl_show_open_short, NULL);
> > +static DEVICE_ATTR(fault, S_IRUGO, sky81452_bl_show_fault, NULL);
> > +
> > +static struct attribute *sky81452_bl_attribute[] = {
> > +	&dev_attr_enable.attr,
> > +	&dev_attr_open.attr,
> > +	&dev_attr_short.attr,
> > +	&dev_attr_fault.attr,
> > +	NULL
> > +};
> > +
> > +static const struct attribute_group sky81452_bl_attr_group = {
> > +	.attrs = sky81452_bl_attribute,
> > +};
> > +
> > +#ifdef CONFIG_OF
> > +static struct sky81452_bl_platform_data *sky81452_bl_parse_dt(
> > +							struct device *dev)
> > +{
> > +	struct device_node *np = of_node_get(dev->of_node);
> > +	struct sky81452_bl_platform_data *pdata;
> > +	int ret;
> > +
> > +	if (!np) {
> > +		dev_err(dev, "backlight node not found.\n");
> > +		return ERR_PTR(-ENODATA);
> > +	}
> > +
> > +	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
> > +	if (!pdata) {
> > +		of_node_put(np);
> > +		return ERR_PTR(-ENOMEM);
> > +	}
> > +
> > +	of_property_read_string(np, "name", &pdata->name);
> > +	pdata->ignore_pwm = of_property_read_bool(np, "skyworks,ignore-pwm");
> > +	pdata->dpwm_mode = of_property_read_bool(np, "skyworks,dpwm-mode");
> > +	pdata->phase_shift = of_property_read_bool(np, "skyworks,phase-shift");
> > +	pdata->gpio_enable = of_get_gpio(np, 0);
> > +
> > +	ret = of_property_read_u32(np, "skyworks,en-channels", &pdata->enable);
> > +	if (IS_ERR_VALUE(ret))
> > +		pdata->enable = SKY81452_EN >> CTZ(SKY81452_EN);
> > +
> > +	ret = of_property_read_u32(np, "skyworks,short-detection-threshold",
> > +			&pdata->short_detection_threshold);
> > +	if (IS_ERR_VALUE(ret))
> > +		pdata->short_detection_threshold = 7;
> > +
> > +	ret = of_property_read_u32(np, "skyworks,current-limit",
> > +			&pdata->boost_current_limit);
> > +	if (IS_ERR_VALUE(ret))
> > +		pdata->boost_current_limit = 2750;
> > +
> > +	of_node_put(np);
> > +	return pdata;
> > +}
> > +#else
> > +static struct sky81452_bl_platform_data *sky81452_bl_parse_dt(
> > +							struct device *dev)
> > +{
> > +	return ERR_PTR(-EINVAL);
> > +}
> > +#endif
> > +
> > +static int sky81452_bl_init_device(struct regmap *regmap,
> > +		struct sky81452_bl_platform_data *pdata)
> > +{
> > +	unsigned int value;
> > +
> > +	value = pdata->ignore_pwm ? SKY81452_IGPW : 0;
> > +	value |= pdata->dpwm_mode ? SKY81452_PWMMD : 0;
> > +	value |= pdata->phase_shift ? 0 : SKY81452_PHASE;
> > +
> > +	if (pdata->boost_current_limit == 2300)
> > +		value |= SKY81452_ILIM;
> > +	else if (pdata->boost_current_limit != 2750)
> > +		return -EINVAL;
> > +
> > +	if (pdata->short_detection_threshold < 4 ||
> > +				pdata->short_detection_threshold > 7)
> > +		return -EINVAL;
> > +	value |= (7 - pdata->short_detection_threshold) << CTZ(SKY81452_VSHRT);
> > +
> > +	return regmap_write(regmap, SKY81452_REG2, value);
> > +}
> > +
> > +static int sky81452_bl_probe(struct platform_device *pdev)
> > +{
> > +	struct device *dev = &pdev->dev;
> > +	struct regmap *regmap = dev_get_drvdata(dev->parent);
> > +	struct sky81452_bl_platform_data *pdata = dev_get_platdata(dev);
> > +	struct backlight_device *bd;
> > +	struct backlight_properties props;
> > +	const char *name;
> > +	int ret;
> > +
> > +	if (!pdata) {
> > +		pdata = sky81452_bl_parse_dt(dev);
> > +		if (IS_ERR(pdata))
> > +			return PTR_ERR(pdata);
> > +	}
> > +
> > +	if (gpio_is_valid(pdata->gpio_enable)) {
> > +		ret = devm_gpio_request_one(dev, pdata->gpio_enable,
> > +					GPIOF_OUT_INIT_HIGH, "sky81452-en");
> > +		if (IS_ERR_VALUE(ret)) {
> > +			dev_err(dev, "failed to request GPIO. err=%d\n", ret);
> > +			return ret;
> > +		}
> > +	}
> > +
> > +	ret = sky81452_bl_init_device(regmap, pdata);
> > +	if (IS_ERR_VALUE(ret)) {
> > +		dev_err(dev, "failed to initialize. err=%d\n", ret);
> > +		return ret;
> > +	}
> > +
> > +	memset(&props, 0, sizeof(props));
> > +	props.max_brightness = SKY81452_MAX_BRIGHTNESS,
> > +	name = pdata->name ? pdata->name : SKY81452_DEFAULT_NAME;
> > +	bd = devm_backlight_device_register(dev, name, dev, regmap,
> > +						&sky81452_bl_ops, &props);
> > +	if (IS_ERR(bd)) {
> > +		dev_err(dev, "failed to register. err=%ld\n", PTR_ERR(bd));
> > +		return PTR_ERR(bd);
> > +	}
> > +
> > +	platform_set_drvdata(pdev, bd);
> > +
> > +	ret  = sysfs_create_group(&bd->dev.kobj, &sky81452_bl_attr_group);
> > +	if (IS_ERR_VALUE(ret)) {
> > +		dev_err(dev, "failed to create attribute. err=%d\n", ret);
> > +		return ret;
> > +	}
> > +
> > +	return ret;
> > +}
> > +
> > +static int sky81452_bl_remove(struct platform_device *pdev)
> > +{
> > +	const struct sky81452_bl_platform_data *pdata =
> > +						dev_get_platdata(&pdev->dev);
> > +	struct backlight_device *bd = platform_get_drvdata(pdev);
> > +
> > +	sysfs_remove_group(&bd->dev.kobj, &sky81452_bl_attr_group);
> > +
> > +	bd->props.power = FB_BLANK_UNBLANK;
> > +	bd->props.brightness = 0;
> > +	backlight_update_status(bd);
> > +
> > +	if (gpio_is_valid(pdata->gpio_enable))
> > +		gpio_set_value_cansleep(pdata->gpio_enable, 0);
> > +
> > +	return 0;
> > +}
> > +
> > +#ifdef CONFIG_OF
> > +static const struct of_device_id sky81452_bl_of_match[] = {
> > +	{ .compatible = "skyworks,sky81452-backlight", },
> > +	{ }
> > +};
> > +MODULE_DEVICE_TABLE(of, sky81452_bl_of_match);
> > +#endif
> > +
> > +static struct platform_driver sky81452_bl_driver = {
> > +	.driver = {
> > +		.name = "sky81452-backlight",
> > +		.of_match_table = of_match_ptr(sky81452_bl_of_match),
> > +	},
> > +	.probe = sky81452_bl_probe,
> > +	.remove = sky81452_bl_remove,
> > +};
> > +
> > +module_platform_driver(sky81452_bl_driver);
> > +
> > +MODULE_DESCRIPTION("Skyworks SKY81452 backlight driver");
> > +MODULE_AUTHOR("Gyungoh Yoo <jack.yoo-tjhQNA90jdKqndwCJWfcng@public.gmane.org>");
> > +MODULE_LICENSE("GPL v2");
> > diff --git a/include/linux/platform_data/sky81452-backlight.h b/include/linux/platform_data/sky81452-
> > backlight.h
> > new file mode 100644
> > index 0000000..1231e9b
> > --- /dev/null
> > +++ b/include/linux/platform_data/sky81452-backlight.h
> > @@ -0,0 +1,46 @@
> > +/*
> > + * sky81452.h	SKY81452 backlight driver
> > + *
> > + * Copyright 2014 Skyworks Solutions Inc.
> > + * Author : Gyungoh Yoo <jack.yoo-tjhQNA90jdKqndwCJWfcng@public.gmane.org>
> > + *
> > + * This program is free software; you can redistribute it and/or modify it
> > + * under the terms of the GNU General Public License version 2
> > + * as published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful, but
> > + * WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
> > + * General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public License along
> > + * with this program; if not, see <http://www.gnu.org/licenses/>.
> > + */
> > +
> > +#ifndef _SKY81452_BACKLIGHT_H
> > +#define _SKY81452_BACKLIGHT_H
> > +
> > +/**
> > + * struct sky81452_platform_data
> > + * @name:	backlight driver name.
> > +		If it is not defined, default name is lcd-backlight.
> > + * @gpio_enable:GPIO number which control EN pin
> > + * @enable:	Enable mask for current sink channel 1, 2, 3, 4, 5 and 6.
> > + * @ignore_pwm:	true if DPWMI should be ignored.
> > + * @dpwm_mode:	true is DPWM dimming mode, otherwise Analog dimming mode.
> > + * @phase_shift:true is phase shift mode.
> > + * @short_detecion_threshold:	It should be one of 4, 5, 6 and 7V.
> > + * @boost_current_limit:	It should be one of 2300, 2750mA.
> > + */
> > +struct sky81452_bl_platform_data {
> > +	const char *name;
> > +	int gpio_enable;
> > +	unsigned int enable;
> > +	bool ignore_pwm;
> > +	bool dpwm_mode;
> > +	bool phase_shift;
> > +	unsigned int short_detection_threshold;
> > +	unsigned int boost_current_limit;
> > +};
> > +
> > +#endif
> > --
> > 1.9.1
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v10 5/6] devicetree: Add vendor prefix for Skyworks Solutions, Inc.

[Lee Jones]

On Thu, 18 Dec 2014, gyungoh@gmail.com wrote:

> From: Gyungoh Yoo <jack.yoo@skyworksinc.com>
> 
> Signed-off-by: Gyungoh Yoo <jack.yoo@skyworksinc.com>
> ---
> Changes v10:
> Nothing
> 
> Changes v9:
> Nothing
> 
> Changes v8:
> Nothing
> 
> Changes v7:
> Nothing
> 
> Changes v6:
> Nothing
> 
> Changes v5:
> Nothing
> 
> Changes v4:
> Nothing
> 
> Changes v3:
> Nothing

Changes v3 => v10:
  Nothing

... might be a little more succinct.
 
> Changes v2:
> Added vendor prefix for Skyworks Solutions, Inc.
> 
>  Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
>  1 file changed, 1 insertion(+)

Acked-by: Lee Jones <lee.jones@linaro.org>

> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
> index a344ec2..68143f0 100644
> --- a/Documentation/devicetree/bindings/vendor-prefixes.txt
> +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
> @@ -140,6 +140,7 @@ sii	Seiko Instruments, Inc.
>  silergy	Silergy Corp.
>  sirf	SiRF Technology, Inc.
>  sitronix	Sitronix Technology Corporation
> +skyworks	Skyworks Solutions, Inc.
>  smsc	Standard Microsystems Corporation
>  snps	Synopsys, Inc.
>  solidrun	SolidRun

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH v10 4/6] devicetree: backlight: Add new SKY81452 backlight binding

[Lee Jones]

DT Ack please.

> From: Gyungoh Yoo <jack.yoo@skyworksinc.com>
> 
> Signed-off-by: Gyungoh Yoo <jack.yoo@skyworksinc.com>
> Acked-by: Bryan Wu <cooloney@gmail.com>
> ---

[...]

> Changes v8:
> Renamed property names for backlight with vendor prefix
> Modified gpio-enable property to generic property for GPIO
> Made up the example for backlight DT

[...]

> Changes v2:
> Added reg attribute for I2C slave address
> 
>  .../video/backlight/sky81452-backlight.txt         | 29 ++++++++++++++++++++++
>  1 file changed, 29 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt
> 
> diff --git a/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt b/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt
> new file mode 100644
> index 0000000..8daebf5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt
> @@ -0,0 +1,29 @@
> +SKY81452-backlight bindings
> +
> +Required properties:
> +- compatible		: Must be "skyworks,sky81452-backlight"
> +
> +Optional properties:
> +- name			: Name of backlight device. Default is 'lcd-backlight'.
> +- gpios			: GPIO to use to EN pin.
> +			See Documentation/devicetree/bindings/gpio/gpio.txt
> +- skyworks,en-channels	: Enable mask for current sink channel 1 to 6.
> +- skyworks,ignore-pwm	: Ignore both PWM input
> +- skyworks,dpwm-mode	: Enable DPWM dimming mode, otherwise Analog dimming.
> +- skyworks,phase-shift	: Enable phase shift mode
> +- skyworks,ovp-level	: Over-voltage protection level.
> +			Should be between 14 or 28V.
> +- skyworks,short-detection-threshold	: It should be one of 4, 5, 6 and 7V.
> +- skyworks,current-limit	: It should be 2300mA or 2750mA.

These need a DT Ack (if they are still alive).

> +Example:
> +
> +	backlight {
> +		compatible = "skyworks,sky81452-backlight";
> +		name = "pwm-backlight";
> +		skyworks,en-channels = <0x3f>;
> +		skyworks,ignore-pwm;
> +		skyworks,phase-shift;
> +		skyworks,ovp-level = <20>;
> +		skyworks,current-limit = <2300>;
> +	};

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH v10 3/6] devicetree: mfd: Add new SKY81452 mfd binding

[Lee Jones]

On Thu, 18 Dec 2014, gyungoh@gmail.com wrote:

> From: Gyungoh Yoo <jack.yoo@skyworksinc.com>
> 
> Signed-off-by: Gyungoh Yoo <jack.yoo@skyworksinc.com>
> ---
> Changes v10:
> Nothing
> 
> Changes v9:
> Nothing
> 
> Changes v8:
> Made up the example for backlight DT
> 
> Changes v7:
> Nothing
> 
> Changes v6:
> Nothing
> 
> Changes v5:
> Changed DT for regulator : 'lout' node should be defined under 'regulator'
> Removed compatible string from sky81452-regulator driver
> 
> Changes v4:
> Nothing
> 
> Changes v3:
> Nothing
> 
> Changes v2:
> Added reg attribute for I2C slave address
> 
>  Documentation/devicetree/bindings/mfd/sky81452.txt | 36 ++++++++++++++++++++++
>  1 file changed, 36 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/sky81452.txt
> 
> diff --git a/Documentation/devicetree/bindings/mfd/sky81452.txt b/Documentation/devicetree/bindings/mfd/sky81452.txt
> new file mode 100644
> index 0000000..ab71473
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/sky81452.txt
> @@ -0,0 +1,36 @@
> +SKY81452 bindings
> +
> +Required properties:
> +- compatible	: Must be "skyworks,sky81452"
> +- reg		: I2C slave address
> +
> +Required child nodes:
> +- backlight	: container node for backlight following the binding
> +		in video/backlight/sky81452-backlight.txt
> +- regulator	: container node for regulators following the binding
> +		in regulator/sky81452-regulator.txt

For these MFD parts.

Acked-by: Lee Jones <lee.jones@linaro.org>

[Don't forget to apply the Acks you receive on subsequent submissions]

The Backlight parts need closer inspection by the DT people.

> +Example:
> +
> +	sky81452@2c {
> +		compatible = "skyworks,sky81452";
> +		reg = <0x2c>;
> +
> +		backlight {
> +			compatible = "skyworks,sky81452-backlight";
> +			name = "pwm-backlight";
> +			skyworks,en-channels = <0x3f>;
> +			skyworks,ignore-pwm;
> +			skyworks,phase-shift;
> +			skyworks,ovp-level = <20>;
> +			skyworks,current-limit = <2300>;
> +		};
> +
> +		regulator {
> +			lout {
> +				regulator-name = "sky81452-lout";
> +				regulator-min-microvolt = <4500000>;
> +				regulator-max-microvolt = <8000000>;
> +			};
> +		};
> +	};

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

[PATCH v10 3/6] devicetree: mfd: Add new SKY81452 mfd binding

[gyungoh]

From: Gyungoh Yoo <jack.yoo@skyworksinc.com>

Signed-off-by: Gyungoh Yoo <jack.yoo@skyworksinc.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
---
Changes v10:
Nothing

Changes v9:
Nothing

Changes v8:
Made up the example for backlight DT

Changes v7:
Nothing

Changes v6:
Nothing

Changes v5:
Changed DT for regulator : 'lout' node should be defined under 'regulator'
Removed compatible string from sky81452-regulator driver

Changes v4:
Nothing

Changes v3:
Nothing

Changes v2:
Added reg attribute for I2C slave address

 Documentation/devicetree/bindings/mfd/sky81452.txt | 36 ++++++++++++++++++++++
 1 file changed, 36 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/sky81452.txt

diff --git a/Documentation/devicetree/bindings/mfd/sky81452.txt b/Documentation/devicetree/bindings/mfd/sky81452.txt
new file mode 100644
index 0000000..ab71473
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/sky81452.txt
@@ -0,0 +1,36 @@
+SKY81452 bindings
+
+Required properties:
+- compatible	: Must be "skyworks,sky81452"
+- reg		: I2C slave address
+
+Required child nodes:
+- backlight	: container node for backlight following the binding
+		in video/backlight/sky81452-backlight.txt
+- regulator	: container node for regulators following the binding
+		in regulator/sky81452-regulator.txt
+
+Example:
+
+	sky81452@2c {
+		compatible = "skyworks,sky81452";
+		reg = <0x2c>;
+
+		backlight {
+			compatible = "skyworks,sky81452-backlight";
+			name = "pwm-backlight";
+			skyworks,en-channels = <0x3f>;
+			skyworks,ignore-pwm;
+			skyworks,phase-shift;
+			skyworks,ovp-level = <20>;
+			skyworks,current-limit = <2300>;
+		};
+
+		regulator {
+			lout {
+				regulator-name = "sky81452-lout";
+				regulator-min-microvolt = <4500000>;
+				regulator-max-microvolt = <8000000>;
+			};
+		};
+	};
-- 
1.9.1

Re: [PATCH v10 3/6] devicetree: mfd: Add new SKY81452 mfd binding

[Gyungoh Yoo]

DT Ack please.

On Wed, Jan 07, 2015 at 11:19:24AM +0900, gyungoh-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org wrote:
> From: Gyungoh Yoo <jack.yoo-tjhQNA90jdKqndwCJWfcng@public.gmane.org>
> 
> Signed-off-by: Gyungoh Yoo <jack.yoo-tjhQNA90jdKqndwCJWfcng@public.gmane.org>
> Acked-by: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> ---
> Changes v10:
> Nothing
> 
> Changes v9:
> Nothing
> 
> Changes v8:
> Made up the example for backlight DT
> 
> Changes v7:
> Nothing
> 
> Changes v6:
> Nothing
> 
> Changes v5:
> Changed DT for regulator : 'lout' node should be defined under 'regulator'
> Removed compatible string from sky81452-regulator driver
> 
> Changes v4:
> Nothing
> 
> Changes v3:
> Nothing
> 
> Changes v2:
> Added reg attribute for I2C slave address
> 
>  Documentation/devicetree/bindings/mfd/sky81452.txt | 36 ++++++++++++++++++++++
>  1 file changed, 36 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/sky81452.txt
> 
> diff --git a/Documentation/devicetree/bindings/mfd/sky81452.txt b/Documentation/devicetree/bindings/mfd/sky81452.txt
> new file mode 100644
> index 0000000..ab71473
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/sky81452.txt
> @@ -0,0 +1,36 @@
> +SKY81452 bindings
> +
> +Required properties:
> +- compatible	: Must be "skyworks,sky81452"
> +- reg		: I2C slave address
> +
> +Required child nodes:
> +- backlight	: container node for backlight following the binding
> +		in video/backlight/sky81452-backlight.txt
> +- regulator	: container node for regulators following the binding
> +		in regulator/sky81452-regulator.txt
> +
> +Example:
> +
> +	sky81452@2c {
> +		compatible = "skyworks,sky81452";
> +		reg = <0x2c>;
> +
> +		backlight {
> +			compatible = "skyworks,sky81452-backlight";
> +			name = "pwm-backlight";
> +			skyworks,en-channels = <0x3f>;
> +			skyworks,ignore-pwm;
> +			skyworks,phase-shift;
> +			skyworks,ovp-level = <20>;
> +			skyworks,current-limit = <2300>;
> +		};
> +
> +		regulator {
> +			lout {
> +				regulator-name = "sky81452-lout";
> +				regulator-min-microvolt = <4500000>;
> +				regulator-max-microvolt = <8000000>;
> +			};
> +		};
> +	};
> -- 
> 1.9.1
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html