From mboxrd@z Thu Jan 1 00:00:00 1970 From: Boris Brezillon Subject: Re: [PATCH 0/3] add Atmel EBI (External Bus Interface) DT nodes for AT91SAM9263 Date: Mon, 29 Dec 2014 16:33:30 +0100 Message-ID: <20141229163330.050f6b60@bbrezillon> References: <1418979100-13243-1-git-send-email-alexanders83@web.de> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1418979100-13243-1-git-send-email-alexanders83-S0/GAf8tV78@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Alexander Stein Cc: Nicolas Ferre , Jean-Christophe Plagniol-Villard , Andrew Victor , Alexandre Belloni , linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: devicetree@vger.kernel.org Hi Alexander, On Fri, 19 Dec 2014 09:51:37 +0100 Alexander Stein wrote: > This is based on and requires Boris' work on an EBI driver for AT91. Please > refer to https://lkml.org/lkml/2014/12/3/806. > The reason I added no pinctrl is that those pins from EBI1 in my case are not > muxable. They are fixed so there is nothing I can test here. > I used this patchset and the EBI to configure a PSRAM to be used by the > atmel_lcdfb driver which works so far. > This also means EBI0 is rather untested, but it should behave like EBI1 if > the numbers are correct. Thanks for your patches. Unless there are other changes in the EBI/SMC bindings (which I'm not sure since the EBI driver has not been accepted yet) you have my Acked-by: Boris Brezillon Regards, Boris -- Boris Brezillon, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html