[PATCH v5 0/6] ASoC: dwc: Add device tree support to designware I2S

[PATCH v5 0/6] ASoC: dwc: Add device tree support to designware I2S

[Andrew Jackson]

From: Andrew Jackson <Andrew.Jackson-5wv7dgnIgG8@public.gmane.org>

This patch set extends the DesignWare I2S driver to provide device
tree support and fixes a couple of small faults.

Changes v4->v5
  + Remove all clk_put calls [Andrew Jackson]
  + Call clk_disable_unprepare [Andrew Jackson]

Changes v3->v4
  + Drop applied patches
  + Use combined function to prepare clock [Mark Brown]
  + Use managed clock resources to avoid clk_put [Mark Brown]
  + Read configuration prameters from hardware for both platform data
    and device tree [Mark Brown]
  + Re-order patch sequence [Mark Brown]
  + Change union name to avoid future collisions [Mark Brown]
  + Check return code from clk_set_rate [Mark Brown]
  + Check parametsrs read from hardware agaist array limits and
    add further comments [Mark Brown]
  + Add of_match_ptr [Mark Brown]

Changes v2->v3
  + Drop applied patch
  + Flush FIFOs in prepare rather than hw_params [Lars-Peter Clausen]

Changes v1->v2
  + Drop negative use count patch [Mark Brown]
  + Remove unnecessary debug print messages [Lars-Peter Clausen]
  + Rewrite iteration as for loop rather than do...while [Mark Brown]
  + Reorder patches to send fixes first [Mark Brown]
  + Simplify device tree code [Mark Brown]
  + Split device tree patch in two [Mark Brown]
  + Expand explanatory comment on channel configuration [Rajeev Kumar]

Arnd: I've not forgotten about updating the spear entries and
      will submit as a separate patch.

Andrew Jackson (6):
  ASoC: dwc: Switch to managed clock resource
  ASoC: dwc: Prepare clock before use
  ASoC: dwc: Read I2S block configuration from registers
  ASoC: dwc: Register components with managed interface
  ASoC: dwc: Add documentation for I2S DT
  ASoC: dwc: Add devicetree support for Designware I2S

 .../devicetree/bindings/sound/designware-i2s.txt   |   31 +++
 sound/soc/dwc/Kconfig                              |    1 +
 sound/soc/dwc/designware_i2s.c                     |  283 ++++++++++++++++----
 3 files changed, 263 insertions(+), 52 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/sound/designware-i2s.txt

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v5 1/6] ASoC: dwc: Switch to managed clock resource

[Andrew Jackson]

From: Andrew Jackson <Andrew.Jackson@arm.com>

Simplify error handling during probe by using managed clock
resources.

Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com>
---
 sound/soc/dwc/designware_i2s.c |   10 ++--------
 1 files changed, 2 insertions(+), 8 deletions(-)

diff --git a/sound/soc/dwc/designware_i2s.c b/sound/soc/dwc/designware_i2s.c
index 06d3a34..5e9d163 100644
--- a/sound/soc/dwc/designware_i2s.c
+++ b/sound/soc/dwc/designware_i2s.c
@@ -407,13 +407,13 @@ static int dw_i2s_probe(struct platform_device *pdev)
 
 	dev->capability = pdata->cap;
 	dev->i2s_clk_cfg = pdata->i2s_clk_cfg;
-	dev->clk = clk_get(&pdev->dev, NULL);
+	dev->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(dev->clk))
 		return  PTR_ERR(dev->clk);
 
 	ret = clk_enable(dev->clk);
 	if (ret < 0)
-		goto err_clk_put;
+		return ret;
 
 	dev_set_drvdata(&pdev->dev, dev);
 	ret = snd_soc_register_component(&pdev->dev, &dw_i2s_component,
@@ -427,19 +427,13 @@ static int dw_i2s_probe(struct platform_device *pdev)
 
 err_clk_disable:
 	clk_disable(dev->clk);
-err_clk_put:
-	clk_put(dev->clk);
 	return ret;
 }
 
 static int dw_i2s_remove(struct platform_device *pdev)
 {
-	struct dw_i2s_dev *dev = dev_get_drvdata(&pdev->dev);
-
 	snd_soc_unregister_component(&pdev->dev);
 
-	clk_put(dev->clk);
-
 	return 0;
 }
 
-- 
1.7.1

[PATCH v5 2/6] ASoC: dwc: Prepare clock before use

[Andrew Jackson]

From: Andrew Jackson <Andrew.Jackson@arm.com>

Some I2S clocks may require some time to get the clock ready
for operation and so need to be prepared before they are enabled.
So, prepare the clock as well as enabling it, but combine the
two through clk_prepare_enable.

Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com>
---
 sound/soc/dwc/designware_i2s.c |    7 +++++--
 1 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/sound/soc/dwc/designware_i2s.c b/sound/soc/dwc/designware_i2s.c
index 5e9d163..08608c1 100644
--- a/sound/soc/dwc/designware_i2s.c
+++ b/sound/soc/dwc/designware_i2s.c
@@ -411,7 +411,7 @@ static int dw_i2s_probe(struct platform_device *pdev)
 	if (IS_ERR(dev->clk))
 		return  PTR_ERR(dev->clk);
 
-	ret = clk_enable(dev->clk);
+	ret = clk_prepare_enable(dev->clk);
 	if (ret < 0)
 		return ret;
 
@@ -426,13 +426,16 @@ static int dw_i2s_probe(struct platform_device *pdev)
 	return 0;
 
 err_clk_disable:
-	clk_disable(dev->clk);
+	clk_disable_unprepare(dev->clk);
 	return ret;
 }
 
 static int dw_i2s_remove(struct platform_device *pdev)
 {
+	struct dw_i2s_dev *dev = dev_get_drvdata(&pdev->dev);
+
 	snd_soc_unregister_component(&pdev->dev);
+	clk_disable_unprepare(dev->clk);
 
 	return 0;
 }
-- 
1.7.1

[PATCH v5 3/6] ASoC: dwc: Read I2S block configuration from registers

[Andrew Jackson]

From: Andrew Jackson <Andrew.Jackson@arm.com>

The I2S block provides component parameter registers which
describe how the block is instantiated.  Use these registers
to extract the block's configuration rather than relying on
platform data.

Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com>
---
 sound/soc/dwc/designware_i2s.c |   96 +++++++++++++++++++++++++++++++++++----
 1 files changed, 86 insertions(+), 10 deletions(-)

diff --git a/sound/soc/dwc/designware_i2s.c b/sound/soc/dwc/designware_i2s.c
index 08608c1..b3e7567 100644
--- a/sound/soc/dwc/designware_i2s.c
+++ b/sound/soc/dwc/designware_i2s.c
@@ -54,6 +54,31 @@
 #define I2S_COMP_VERSION	0x01F8
 #define I2S_COMP_TYPE		0x01FC
 
+/*
+ * Component parameter register fields - define the I2S block's
+ * configuration.
+ */
+#define	COMP1_TX_WORDSIZE_3(r)	(((r) & GENMASK(27, 25)) >> 25)
+#define	COMP1_TX_WORDSIZE_2(r)	(((r) & GENMASK(24, 22)) >> 22)
+#define	COMP1_TX_WORDSIZE_1(r)	(((r) & GENMASK(21, 19)) >> 19)
+#define	COMP1_TX_WORDSIZE_0(r)	(((r) & GENMASK(18, 16)) >> 16)
+#define	COMP1_TX_CHANNELS(r)	(((r) & GENMASK(10, 9)) >> 9)
+#define	COMP1_RX_CHANNELS(r)	(((r) & GENMASK(8, 7)) >> 7)
+#define	COMP1_RX_ENABLED(r)	(((r) & BIT(6)) >> 6)
+#define	COMP1_TX_ENABLED(r)	(((r) & BIT(5)) >> 5)
+#define	COMP1_MODE_EN(r)	(((r) & BIT(4)) >> 4)
+#define	COMP1_FIFO_DEPTH_GLOBAL(r)	(((r) & GENMASK(3, 2)) >> 2)
+#define	COMP1_APB_DATA_WIDTH(r)	(((r) & GENMASK(1, 0)) >> 0)
+
+#define	COMP2_RX_WORDSIZE_3(r)	(((r) & GENMASK(12, 10)) >> 10)
+#define	COMP2_RX_WORDSIZE_2(r)	(((r) & GENMASK(9, 7)) >> 7)
+#define	COMP2_RX_WORDSIZE_1(r)	(((r) & GENMASK(5, 3)) >> 3)
+#define	COMP2_RX_WORDSIZE_0(r)	(((r) & GENMASK(2, 0)) >> 0)
+
+/* Number of entries in WORDSIZE and DATA_WIDTH parameter registers */
+#define	COMP_MAX_WORDSIZE	(1 << 3)
+#define	COMP_MAX_DATA_WIDTH	(1 << 2)
+
 #define MAX_CHANNEL_NUM		8
 #define MIN_CHANNEL_NUM		2
 
@@ -335,11 +360,50 @@ static int dw_i2s_resume(struct snd_soc_dai *dai)
 #define dw_i2s_resume	NULL
 #endif
 
-static void dw_configure_dai_by_pd(struct dw_i2s_dev *dev,
+/*
+ * The following tables allow a direct lookup of various parameters
+ * defined in the I2S block's configuration in terms of sound system
+ * parameters.  Each table is sized to the number of entries possible
+ * according to the number of configuration bits describing an I2S
+ * block parameter.
+ */
+
+/* Width of (DMA) bus */
+static const u32 bus_widths[COMP_MAX_DATA_WIDTH] = {
+	DMA_SLAVE_BUSWIDTH_1_BYTE,
+	DMA_SLAVE_BUSWIDTH_2_BYTES,
+	DMA_SLAVE_BUSWIDTH_4_BYTES,
+	DMA_SLAVE_BUSWIDTH_UNDEFINED
+};
+
+/* PCM format to support channel resolution */
+static const u32 formats[COMP_MAX_WORDSIZE] = {
+	SNDRV_PCM_FMTBIT_S16_LE,
+	SNDRV_PCM_FMTBIT_S16_LE,
+	SNDRV_PCM_FMTBIT_S24_LE,
+	SNDRV_PCM_FMTBIT_S24_LE,
+	SNDRV_PCM_FMTBIT_S32_LE,
+	0,
+	0,
+	0
+};
+
+static int dw_configure_dai_by_pd(struct dw_i2s_dev *dev,
 				   struct snd_soc_dai_driver *dw_i2s_dai,
 				   struct resource *res,
 				   const struct i2s_platform_data *pdata)
 {
+	/*
+	 * Read component parameter registers to extract
+	 * the I2S block's configuration.
+	 */
+	u32 comp1 = i2s_read_reg(dev->i2s_base, I2S_COMP_PARAM_1);
+	u32 comp2 = i2s_read_reg(dev->i2s_base, I2S_COMP_PARAM_2);
+	u32 idx = COMP1_APB_DATA_WIDTH(comp1);
+
+	if (WARN_ON(idx >= ARRAY_SIZE(bus_widths)))
+		return -EINVAL;
+
 	/* Set DMA slaves info */
 
 	dev->play_dma_data.data = pdata->play_dma_data;
@@ -348,26 +412,36 @@ static void dw_configure_dai_by_pd(struct dw_i2s_dev *dev,
 	dev->capture_dma_data.addr = res->start + I2S_RXDMA;
 	dev->play_dma_data.max_burst = 16;
 	dev->capture_dma_data.max_burst = 16;
-	dev->play_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
-	dev->capture_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
+	dev->play_dma_data.addr_width = bus_widths[idx];
+	dev->capture_dma_data.addr_width = bus_widths[idx];
 	dev->play_dma_data.filter = pdata->filter;
 	dev->capture_dma_data.filter = pdata->filter;
 
-	if (pdata->cap & DWC_I2S_PLAY) {
+	if (COMP1_TX_ENABLED(comp1)) {
 		dev_dbg(dev->dev, " designware: play supported\n");
+		idx = COMP1_TX_WORDSIZE_0(comp1);
+		if (WARN_ON(idx >= ARRAY_SIZE(formats)))
+			return -EINVAL;
 		dw_i2s_dai->playback.channels_min = MIN_CHANNEL_NUM;
-		dw_i2s_dai->playback.channels_max = pdata->channel;
-		dw_i2s_dai->playback.formats = pdata->snd_fmts;
+		dw_i2s_dai->playback.channels_max =
+				1 << (COMP1_TX_CHANNELS(comp1) + 1);
+		dw_i2s_dai->playback.formats = formats[idx];
 		dw_i2s_dai->playback.rates = pdata->snd_rates;
 	}
 
-	if (pdata->cap & DWC_I2S_RECORD) {
+	if (COMP1_RX_ENABLED(comp1)) {
 		dev_dbg(dev->dev, "designware: record supported\n");
+		idx = COMP2_RX_WORDSIZE_0(comp2);
+		if (WARN_ON(idx >= ARRAY_SIZE(formats)))
+			return -EINVAL;
 		dw_i2s_dai->capture.channels_min = MIN_CHANNEL_NUM;
-		dw_i2s_dai->capture.channels_max = pdata->channel;
-		dw_i2s_dai->capture.formats = pdata->snd_fmts;
+		dw_i2s_dai->capture.channels_max =
+				1 << (COMP1_RX_CHANNELS(comp1) + 1);
+		dw_i2s_dai->capture.formats = formats[idx];
 		dw_i2s_dai->capture.rates = pdata->snd_rates;
 	}
+
+	return 0;
 }
 
 static int dw_i2s_probe(struct platform_device *pdev)
@@ -403,7 +477,9 @@ static int dw_i2s_probe(struct platform_device *pdev)
 		return PTR_ERR(dev->i2s_base);
 
 	dev->dev = &pdev->dev;
-	dw_configure_dai_by_pd(dev, dw_i2s_dai, res, pdata);
+	ret = dw_configure_dai_by_pd(dev, dw_i2s_dai, res, pdata);
+	if (ret < 0)
+		return ret;
 
 	dev->capability = pdata->cap;
 	dev->i2s_clk_cfg = pdata->i2s_clk_cfg;
-- 
1.7.1

[PATCH v5 4/6] ASoC: dwc: Register components with managed interface

[Andrew Jackson]

From: Andrew Jackson <Andrew.Jackson@arm.com>

Register SOC component using managed interface to
simplify error handling and future introduction of
device tree.

Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com>
---
 sound/soc/dwc/designware_i2s.c |    3 +--
 1 files changed, 1 insertions(+), 2 deletions(-)

diff --git a/sound/soc/dwc/designware_i2s.c b/sound/soc/dwc/designware_i2s.c
index b3e7567..e1c0e2c 100644
--- a/sound/soc/dwc/designware_i2s.c
+++ b/sound/soc/dwc/designware_i2s.c
@@ -492,7 +492,7 @@ static int dw_i2s_probe(struct platform_device *pdev)
 		return ret;
 
 	dev_set_drvdata(&pdev->dev, dev);
-	ret = snd_soc_register_component(&pdev->dev, &dw_i2s_component,
+	ret = devm_snd_soc_register_component(&pdev->dev, &dw_i2s_component,
 					 dw_i2s_dai, 1);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "not able to register dai\n");
@@ -510,7 +510,6 @@ static int dw_i2s_remove(struct platform_device *pdev)
 {
 	struct dw_i2s_dev *dev = dev_get_drvdata(&pdev->dev);
 
-	snd_soc_unregister_component(&pdev->dev);
 	clk_disable_unprepare(dev->clk);
 
 	return 0;
-- 
1.7.1

[PATCH v5 5/6] ASoC: dwc: Add documentation for I2S DT

[Andrew Jackson]

From: Andrew Jackson <Andrew.Jackson@arm.com>

Add documentation for Designware I2S hardware block.  The block requires
one clock (for audio sampling) and DMA channels for receive and transmit.

Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com>
---
 .../devicetree/bindings/sound/designware-i2s.txt   |   31 ++++++++++++++++++++
 1 files changed, 31 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/sound/designware-i2s.txt

diff --git a/Documentation/devicetree/bindings/sound/designware-i2s.txt b/Documentation/devicetree/bindings/sound/designware-i2s.txt
new file mode 100644
index 0000000..7bb5424
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/designware-i2s.txt
@@ -0,0 +1,31 @@
+DesignWare I2S controller
+
+Required properties:
+ - compatible : Must be "snps,designware-i2s"
+ - reg : Must contain the I2S core's registers location and length
+ - clocks : Pairs of phandle and specifier referencing the controller's
+   clocks. The controller expects one clock: the clock used as the sampling
+   rate reference clock sample.
+ - clock-names : "i2sclk" for the sample rate reference clock.
+ - dmas: Pairs of phandle and specifier for the DMA channels that are used by
+   the core. The core expects one or two dma channels: one for transmit and
+   one for receive.
+ - dma-names : "tx" for the transmit channel, "rx" for the receive channel.
+
+For more details on the 'dma', 'dma-names', 'clock' and 'clock-names'
+properties please check:
+	* resource-names.txt
+	* clock/clock-bindings.txt
+	* dma/dma.txt
+
+Example:
+
+	soc_i2s: i2s@7ff90000 {
+		compatible = "snps,designware-i2s";
+		reg = <0x0 0x7ff90000 0x0 0x1000>;
+		clocks = <&scpi_i2sclk 0>;
+		clock-names = "i2sclk";
+		#sound-dai-cells = <0>;
+		dmas = <&dma0 5>;
+		dma-names = "tx";
+	};
-- 
1.7.1

[PATCH v5 6/6] ASoC: dwc: Add devicetree support for Designware I2S

[Andrew Jackson]

From: Andrew Jackson <Andrew.Jackson@arm.com>

Allow the driver to be configured through a device tree rather than platform
data.

Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com>
---
 sound/soc/dwc/Kconfig          |    1 +
 sound/soc/dwc/designware_i2s.c |  193 +++++++++++++++++++++++++++++++---------
 2 files changed, 151 insertions(+), 43 deletions(-)

diff --git a/sound/soc/dwc/Kconfig b/sound/soc/dwc/Kconfig
index e334900..d50e085 100644
--- a/sound/soc/dwc/Kconfig
+++ b/sound/soc/dwc/Kconfig
@@ -1,6 +1,7 @@
 config SND_DESIGNWARE_I2S
 	tristate "Synopsys I2S Device Driver"
 	depends on CLKDEV_LOOKUP
+	select SND_SOC_GENERIC_DMAENGINE_PCM
 	help
 	 Say Y or M if you want to add support for I2S driver for
 	 Synopsys desigwnware I2S device. The device supports upto
diff --git a/sound/soc/dwc/designware_i2s.c b/sound/soc/dwc/designware_i2s.c
index e1c0e2c..99cf64b 100644
--- a/sound/soc/dwc/designware_i2s.c
+++ b/sound/soc/dwc/designware_i2s.c
@@ -22,6 +22,7 @@
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
 #include <sound/soc.h>
+#include <sound/dmaengine_pcm.h>
 
 /* common register for all channel */
 #define IER		0x000
@@ -82,6 +83,11 @@
 #define MAX_CHANNEL_NUM		8
 #define MIN_CHANNEL_NUM		2
 
+union dw_i2s_snd_dma_data {
+	struct i2s_dma_data pd;
+	struct snd_dmaengine_dai_dma_data dt;
+};
+
 struct dw_i2s_dev {
 	void __iomem *i2s_base;
 	struct clk *clk;
@@ -90,8 +96,8 @@ struct dw_i2s_dev {
 	struct device *dev;
 
 	/* data related to DMA transfers b/w i2s and DMAC */
-	struct i2s_dma_data play_dma_data;
-	struct i2s_dma_data capture_dma_data;
+	union dw_i2s_snd_dma_data play_dma_data;
+	union dw_i2s_snd_dma_data capture_dma_data;
 	struct i2s_clk_config_data config;
 	int (*i2s_clk_cfg)(struct i2s_clk_config_data *config);
 };
@@ -178,7 +184,7 @@ static int dw_i2s_startup(struct snd_pcm_substream *substream,
 		struct snd_soc_dai *cpu_dai)
 {
 	struct dw_i2s_dev *dev = snd_soc_dai_get_drvdata(cpu_dai);
-	struct i2s_dma_data *dma_data = NULL;
+	union dw_i2s_snd_dma_data *dma_data = NULL;
 
 	if (!(dev->capability & DWC_I2S_RECORD) &&
 			(substream->stream == SNDRV_PCM_STREAM_CAPTURE))
@@ -267,13 +273,21 @@ static int dw_i2s_hw_params(struct snd_pcm_substream *substream,
 
 	config->sample_rate = params_rate(params);
 
-	if (!dev->i2s_clk_cfg)
-		return -EINVAL;
+	if (dev->i2s_clk_cfg) {
+		ret = dev->i2s_clk_cfg(config);
+		if (ret < 0) {
+			dev_err(dev->dev, "runtime audio clk config fail\n");
+			return ret;
+		}
+	} else {
+		u32 bitclk = config->sample_rate * config->data_width * 2;
 
-	ret = dev->i2s_clk_cfg(config);
-	if (ret < 0) {
-		dev_err(dev->dev, "runtime audio clk config fail\n");
-		return ret;
+		ret = clk_set_rate(dev->clk, bitclk);
+		if (ret) {
+			dev_err(dev->dev, "Can't set I2S clock rate: %d\n",
+				ret);
+			return ret;
+		}
 	}
 
 	return 0;
@@ -368,6 +382,11 @@ static int dw_i2s_resume(struct snd_soc_dai *dai)
  * block parameter.
  */
 
+/* Maximum bit resolution of a channel - not uniformly spaced */
+static const u32 fifo_width[COMP_MAX_WORDSIZE] = {
+	12, 16, 20, 24, 32, 0, 0, 0
+};
+
 /* Width of (DMA) bus */
 static const u32 bus_widths[COMP_MAX_DATA_WIDTH] = {
 	DMA_SLAVE_BUSWIDTH_1_BYTE,
@@ -388,10 +407,9 @@ static const u32 formats[COMP_MAX_WORDSIZE] = {
 	0
 };
 
-static int dw_configure_dai_by_pd(struct dw_i2s_dev *dev,
+static int dw_configure_dai(struct dw_i2s_dev *dev,
 				   struct snd_soc_dai_driver *dw_i2s_dai,
-				   struct resource *res,
-				   const struct i2s_platform_data *pdata)
+				   unsigned int rates)
 {
 	/*
 	 * Read component parameter registers to extract
@@ -399,23 +417,7 @@ static int dw_configure_dai_by_pd(struct dw_i2s_dev *dev,
 	 */
 	u32 comp1 = i2s_read_reg(dev->i2s_base, I2S_COMP_PARAM_1);
 	u32 comp2 = i2s_read_reg(dev->i2s_base, I2S_COMP_PARAM_2);
-	u32 idx = COMP1_APB_DATA_WIDTH(comp1);
-
-	if (WARN_ON(idx >= ARRAY_SIZE(bus_widths)))
-		return -EINVAL;
-
-	/* Set DMA slaves info */
-
-	dev->play_dma_data.data = pdata->play_dma_data;
-	dev->capture_dma_data.data = pdata->capture_dma_data;
-	dev->play_dma_data.addr = res->start + I2S_TXDMA;
-	dev->capture_dma_data.addr = res->start + I2S_RXDMA;
-	dev->play_dma_data.max_burst = 16;
-	dev->capture_dma_data.max_burst = 16;
-	dev->play_dma_data.addr_width = bus_widths[idx];
-	dev->capture_dma_data.addr_width = bus_widths[idx];
-	dev->play_dma_data.filter = pdata->filter;
-	dev->capture_dma_data.filter = pdata->filter;
+	u32 idx;
 
 	if (COMP1_TX_ENABLED(comp1)) {
 		dev_dbg(dev->dev, " designware: play supported\n");
@@ -426,7 +428,7 @@ static int dw_configure_dai_by_pd(struct dw_i2s_dev *dev,
 		dw_i2s_dai->playback.channels_max =
 				1 << (COMP1_TX_CHANNELS(comp1) + 1);
 		dw_i2s_dai->playback.formats = formats[idx];
-		dw_i2s_dai->playback.rates = pdata->snd_rates;
+		dw_i2s_dai->playback.rates = rates;
 	}
 
 	if (COMP1_RX_ENABLED(comp1)) {
@@ -438,10 +440,86 @@ static int dw_configure_dai_by_pd(struct dw_i2s_dev *dev,
 		dw_i2s_dai->capture.channels_max =
 				1 << (COMP1_RX_CHANNELS(comp1) + 1);
 		dw_i2s_dai->capture.formats = formats[idx];
-		dw_i2s_dai->capture.rates = pdata->snd_rates;
+		dw_i2s_dai->capture.rates = rates;
+	}
+
+	return 0;
+}
+
+static int dw_configure_dai_by_pd(struct dw_i2s_dev *dev,
+				   struct snd_soc_dai_driver *dw_i2s_dai,
+				   struct resource *res,
+				   const struct i2s_platform_data *pdata)
+{
+	u32 comp1 = i2s_read_reg(dev->i2s_base, I2S_COMP_PARAM_1);
+	u32 idx = COMP1_APB_DATA_WIDTH(comp1);
+	int ret;
+
+	if (WARN_ON(idx >= ARRAY_SIZE(bus_widths)))
+		return -EINVAL;
+
+	ret = dw_configure_dai(dev, dw_i2s_dai, pdata->snd_rates);
+	if (ret < 0)
+		return ret;
+
+	/* Set DMA slaves info */
+	dev->play_dma_data.pd.data = pdata->play_dma_data;
+	dev->capture_dma_data.pd.data = pdata->capture_dma_data;
+	dev->play_dma_data.pd.addr = res->start + I2S_TXDMA;
+	dev->capture_dma_data.pd.addr = res->start + I2S_RXDMA;
+	dev->play_dma_data.pd.max_burst = 16;
+	dev->capture_dma_data.pd.max_burst = 16;
+	dev->play_dma_data.pd.addr_width = bus_widths[idx];
+	dev->capture_dma_data.pd.addr_width = bus_widths[idx];
+	dev->play_dma_data.pd.filter = pdata->filter;
+	dev->capture_dma_data.pd.filter = pdata->filter;
+
+	return 0;
+}
+
+static int dw_configure_dai_by_dt(struct dw_i2s_dev *dev,
+				   struct snd_soc_dai_driver *dw_i2s_dai,
+				   struct resource *res)
+{
+	u32 comp1 = i2s_read_reg(dev->i2s_base, I2S_COMP_PARAM_1);
+	u32 comp2 = i2s_read_reg(dev->i2s_base, I2S_COMP_PARAM_2);
+	u32 fifo_depth = 1 << (1 + COMP1_FIFO_DEPTH_GLOBAL(comp1));
+	u32 idx = COMP1_APB_DATA_WIDTH(comp1);
+	u32 idx2;
+	int ret;
+
+	if (WARN_ON(idx >= ARRAY_SIZE(bus_widths)))
+		return -EINVAL;
+
+	ret = dw_configure_dai(dev, dw_i2s_dai, SNDRV_PCM_RATE_8000_192000);
+	if (ret < 0)
+		return ret;
+
+	if (COMP1_TX_ENABLED(comp1)) {
+		idx2 = COMP1_TX_WORDSIZE_0(comp1);
+
+		dev->capability |= DWC_I2S_PLAY;
+		dev->play_dma_data.dt.addr = res->start + I2S_TXDMA;
+		dev->play_dma_data.dt.addr_width = bus_widths[idx];
+		dev->play_dma_data.dt.chan_name = "TX";
+		dev->play_dma_data.dt.fifo_size = fifo_depth *
+			(fifo_width[idx2]) >> 8;
+		dev->play_dma_data.dt.maxburst = 16;
+	}
+	if (COMP1_RX_ENABLED(comp1)) {
+		idx2 = COMP2_RX_WORDSIZE_0(comp2);
+
+		dev->capability |= DWC_I2S_RECORD;
+		dev->capture_dma_data.dt.addr = res->start + I2S_RXDMA;
+		dev->capture_dma_data.dt.addr_width = bus_widths[idx];
+		dev->capture_dma_data.dt.chan_name = "RX";
+		dev->capture_dma_data.dt.fifo_size = fifo_depth *
+			(fifo_width[idx2] >> 8);
+		dev->capture_dma_data.dt.maxburst = 16;
 	}
 
 	return 0;
+
 }
 
 static int dw_i2s_probe(struct platform_device *pdev)
@@ -452,11 +530,6 @@ static int dw_i2s_probe(struct platform_device *pdev)
 	int ret;
 	struct snd_soc_dai_driver *dw_i2s_dai;
 
-	if (!pdata) {
-		dev_err(&pdev->dev, "Invalid platform data\n");
-		return -EINVAL;
-	}
-
 	dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
 	if (!dev) {
 		dev_warn(&pdev->dev, "kzalloc fail\n");
@@ -477,15 +550,28 @@ static int dw_i2s_probe(struct platform_device *pdev)
 		return PTR_ERR(dev->i2s_base);
 
 	dev->dev = &pdev->dev;
-	ret = dw_configure_dai_by_pd(dev, dw_i2s_dai, res, pdata);
-	if (ret < 0)
-		return ret;
+	if (pdata) {
+		ret = dw_configure_dai_by_pd(dev, dw_i2s_dai, res, pdata);
+		if (ret < 0)
+			return ret;
+
+		dev->capability = pdata->cap;
+		dev->i2s_clk_cfg = pdata->i2s_clk_cfg;
+		if (!dev->i2s_clk_cfg) {
+			dev_err(&pdev->dev, "no clock configure method\n");
+			return -ENODEV;
+		}
+
+		dev->clk = devm_clk_get(&pdev->dev, NULL);
+	} else {
+		ret = dw_configure_dai_by_dt(dev, dw_i2s_dai, res);
+		if (ret < 0)
+			return ret;
 
-	dev->capability = pdata->cap;
-	dev->i2s_clk_cfg = pdata->i2s_clk_cfg;
-	dev->clk = devm_clk_get(&pdev->dev, NULL);
+		dev->clk = devm_clk_get(&pdev->dev, "i2sclk");
+	}
 	if (IS_ERR(dev->clk))
-		return  PTR_ERR(dev->clk);
+		return PTR_ERR(dev->clk);
 
 	ret = clk_prepare_enable(dev->clk);
 	if (ret < 0)
@@ -499,6 +585,15 @@ static int dw_i2s_probe(struct platform_device *pdev)
 		goto err_clk_disable;
 	}
 
+	if (!pdata) {
+		ret = devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, 0);
+		if (ret) {
+			dev_err(&pdev->dev,
+				"Could not register PCM: %d\n", ret);
+			goto err_clk_disable;
+		}
+	}
+
 	return 0;
 
 err_clk_disable:
@@ -515,11 +610,23 @@ static int dw_i2s_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_OF
+static const struct of_device_id dw_i2s_of_match[] = {
+	{ .compatible = "snps,designware-i2s",	 },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, dw_i2s_of_match);
+#endif
+
 static struct platform_driver dw_i2s_driver = {
 	.probe		= dw_i2s_probe,
 	.remove		= dw_i2s_remove,
 	.driver		= {
 		.name	= "designware-i2s",
+#ifdef CONFIG_OF
+		.of_match_table = of_match_ptr(dw_i2s_of_match),
+#endif
 	},
 };
 
-- 
1.7.1

Re: [PATCH v5 2/6] ASoC: dwc: Prepare clock before use

[Sergei Shtylyov]

Hello.

On 12/30/2014 1:55 PM, Andrew Jackson wrote:

> From: Andrew Jackson <Andrew.Jackson@arm.com>

> Some I2S clocks may require some time to get the clock ready
> for operation and so need to be prepared before they are enabled.
> So, prepare the clock as well as enabling it, but combine the
> two through clk_prepare_enable.

> Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com>
> ---
>   sound/soc/dwc/designware_i2s.c |    7 +++++--
>   1 files changed, 5 insertions(+), 2 deletions(-)

> diff --git a/sound/soc/dwc/designware_i2s.c b/sound/soc/dwc/designware_i2s.c
> index 5e9d163..08608c1 100644
> --- a/sound/soc/dwc/designware_i2s.c
> +++ b/sound/soc/dwc/designware_i2s.c
[...]
> @@ -426,13 +426,16 @@ static int dw_i2s_probe(struct platform_device *pdev)
[...]
>   static int dw_i2s_remove(struct platform_device *pdev)
>   {
> +	struct dw_i2s_dev *dev = dev_get_drvdata(&pdev->dev);

    Why not just platform_get_drvdata(pdev)?

[...]

WBR, Sergei

Re: [PATCH v5 1/6] ASoC: dwc: Switch to managed clock resource

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 236 bytes --]

On Tue, Dec 30, 2014 at 10:55:43AM +0000, Andrew Jackson wrote:
> From: Andrew Jackson <Andrew.Jackson-5wv7dgnIgG8@public.gmane.org>
> 
> Simplify error handling during probe by using managed clock
> resources.

Applied, thanks.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 473 bytes --]

Re: [PATCH v5 2/6] ASoC: dwc: Prepare clock before use

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 587 bytes --]

On Tue, Dec 30, 2014 at 10:55:44AM +0000, Andrew Jackson wrote:
> From: Andrew Jackson <Andrew.Jackson@arm.com>
> 
> Some I2S clocks may require some time to get the clock ready
> for operation and so need to be prepared before they are enabled.
> So, prepare the clock as well as enabling it, but combine the
> two through clk_prepare_enable.

Applied, though the changelog is inaccurate - the need to do things
outside of hardirq context is the reason the common clock API has a
prepare stage but it's just a flat out requirement of the common clock
API to prepare clocks.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 473 bytes --]

Re: [PATCH v5 5/6] ASoC: dwc: Add documentation for I2S DT

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 291 bytes --]

On Tue, Dec 30, 2014 at 10:55:47AM +0000, Andrew Jackson wrote:
> From: Andrew Jackson <Andrew.Jackson@arm.com>
> 
> Add documentation for Designware I2S hardware block.  The block requires
> one clock (for audio sampling) and DMA channels for receive and transmit.

Applied, thanks.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 473 bytes --]

Re: [PATCH v5 6/6] ASoC: dwc: Add devicetree support for Designware I2S

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 456 bytes --]

On Tue, Dec 30, 2014 at 10:55:48AM +0000, Andrew Jackson wrote:
> From: Andrew Jackson <Andrew.Jackson-5wv7dgnIgG8@public.gmane.org>
> 
> Allow the driver to be configured through a device tree rather than platform
> data.

Applied but...

> +#ifdef CONFIG_OF
> +		.of_match_table = of_match_ptr(dw_i2s_of_match),
> +#endif

...the whole point of of_match_ptr() is that it avoids the need for the
ifdef, please send a followup removing them.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 473 bytes --]