public inbox for devicetree@vger.kernel.org
 help / color / mirror / Atom feed
From: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
To: "Peter Pan 潘栋 (peterpandong)"
	<peterpandong-AL4WhLSQfzjQT0dZR+AlfA@public.gmane.org>
Cc: "robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org"
	<robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	"Pawel Moll" <Pawel.Moll-5wv7dgnIgG8@public.gmane.org>,
	"ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org"
	<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
	"galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org"
	<galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
	"dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org"
	<dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>,
	"Brian Norris"
	<computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	"Ezequiel Garcia"
	<ezequiel.garcia-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org>,
	"devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
	<devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	"linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
	<linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	"Qi Wang 王起 (qiwang)"
	<qiwang-AL4WhLSQfzjQT0dZR+AlfA@public.gmane.org>,
	"Frank Liu 刘群 (frankliu)"
	<frankliu-AL4WhLSQfzjQT0dZR+AlfA@public.gmane.org>,
	"Melanie Zhang 张燕 (melaniezhang)"
	<melaniezhang-AL4WhLSQfzjQT0dZR+AlfA@public.gmane.org>
Subject: Re: [PATCH 3/3] mtd: spi-nand: add devicetree binding
Date: Thu, 8 Jan 2015 14:35:42 +0000	[thread overview]
Message-ID: <20150108143542.GF10537@leverpostej> (raw)
In-Reply-To: <87F60714EC601C4C83DFF1D2E3D390A04AB425-xjs9rfTec9KBtk7LW/CC8tTcztV8WXajQQ4Iyu8u01E@public.gmane.org>

On Thu, Jan 08, 2015 at 12:52:26AM +0000, Peter Pan 潘栋 (peterpandong) wrote:
> This commit adds the devicetree binding document that specifies the
> spi nand devices support.
> 
> Signed-off-by: Peter Pan <peterpandong-AL4WhLSQfzjQT0dZR+AlfA@public.gmane.org>
> ---
>  Documentation/devicetree/bindings/mtd/spi-nand.txt | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mtd/spi-nand.txt
> 
> diff --git a/Documentation/devicetree/bindings/mtd/spi-nand.txt b/Documentation/devicetree/bindings/mtd/spi-nand.txt
> new file mode 100644
> index 0000000..9dd3efd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mtd/spi-nand.txt
> @@ -0,0 +1,22 @@
> +* NAND driver for MT29F, GD5F and similar SPI NAND flash chips
> +
> +Required properties:
> +- #address-cells, #size-cells : Must be present if the device has sub-nodes
> +  representing partitions.

Can we refer to the binding document for that?

> +- compatible : Should be the manufacturer and the name of the chip. Bear in mind
> +               the DT binding is not Linux-only, but in case of Linux, see the
> +               "spi_nand_id_table" array in drivers/mtd/spi-nand/spi-nand-device.c
> +               for the list of supported chips.

NAK for referring to Linux internals from a binding document.

The list of compatible string should be defined in this binding
document.

> +- reg : Chip-Select number
> +- spi-max-frequency : Maximum frequency of the SPI bus the chip can operate at
> +
> +Example:
> +
> +	flash: flash@0 {
> +		#address-cells = <1>;
> +		#size-cells = <1>;

These aren't necessary as no partitions are defined here.

Otherwise, this looks ok.

Thanks,
Mark.

> +		compatible = "micron,mt29f";
> +		reg = <0>;
> +		spi-max-frequency = <50000000>;
> +	};
> +
> -- 
> 1.9.1
> N嫥叉靣笡y氊b瞂千v豝?藓{.n?壏漽鴾z谵z)韰骅w*\x1fjg?秹殠娸/侁鋤罐枈?娹櫒璀??摺玜囤\x7f\x1e瓽珴閔?鎗:+v墾妛鑶佶
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

      parent reply	other threads:[~2015-01-08 14:35 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-08  0:52 [PATCH 3/3] mtd: spi-nand: add devicetree binding Peter Pan 潘栋 (peterpandong)
2015-01-08  3:15 ` Ezequiel Garcia
2015-01-08  5:04   ` Peter Pan 潘栋 (peterpandong)
2015-01-08 15:12     ` Ezequiel Garcia
     [not found]       ` <54AE9E54.2010506-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org>
2015-01-12  1:57         ` Peter Pan 潘栋 (peterpandong)
2015-01-20 10:59           ` Ezequiel Garcia
     [not found] ` <87F60714EC601C4C83DFF1D2E3D390A04AB425-xjs9rfTec9KBtk7LW/CC8tTcztV8WXajQQ4Iyu8u01E@public.gmane.org>
2015-01-08 14:35   ` Mark Rutland [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150108143542.GF10537@leverpostej \
    --to=mark.rutland-5wv7dgnigg8@public.gmane.org \
    --cc=Pawel.Moll-5wv7dgnIgG8@public.gmane.org \
    --cc=computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org \
    --cc=ezequiel.garcia-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org \
    --cc=frankliu-AL4WhLSQfzjQT0dZR+AlfA@public.gmane.org \
    --cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=melaniezhang-AL4WhLSQfzjQT0dZR+AlfA@public.gmane.org \
    --cc=peterpandong-AL4WhLSQfzjQT0dZR+AlfA@public.gmane.org \
    --cc=qiwang-AL4WhLSQfzjQT0dZR+AlfA@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox