From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mark Rutland Subject: Re: [PATCH v2 4/8] irqchip: devicetree: document Conexant Digicolor irq binding Date: Fri, 9 Jan 2015 11:50:14 +0000 Message-ID: <20150109115014.GC12942@leverpostej> References: <3bdf8fa0bf971b4881024e72312c3c9d29298e79.1420744369.git.baruch@tkos.co.il> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <3bdf8fa0bf971b4881024e72312c3c9d29298e79.1420744369.git.baruch-NswTu9S1W3P6gbPvEgmw2w@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Baruch Siach Cc: "linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org" , Thomas Gleixner , Jason Cooper , Rob Herring , Pawel Moll , Ian Campbell , Kumar Gala , "linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org" , "devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org" List-Id: devicetree@vger.kernel.org On Thu, Jan 08, 2015 at 07:40:00PM +0000, Baruch Siach wrote: > Signed-off-by: Baruch Siach > --- > .../bindings/interrupt-controller/digicolor-ic.txt | 20 ++++++++++++++++++++ > 1 file changed, 20 insertions(+) > create mode 100644 Documentation/devicetree/bindings/interrupt-controller/digicolor-ic.txt > > diff --git a/Documentation/devicetree/bindings/interrupt-controller/digicolor-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/digicolor-ic.txt > new file mode 100644 > index 000000000000..fdf9a4c59bf3 > --- /dev/null > +++ b/Documentation/devicetree/bindings/interrupt-controller/digicolor-ic.txt > @@ -0,0 +1,20 @@ > +Conexant Digicolor Interrupt Controller > + > +Required properties: > + > +- compatible : should be "cnxt,cx92755-ic" I didn't spot "cnxt" in Documentation/devicetree/bindings/vendor-prefixes.txt in mainline, nor did I spot it added as part of this series. Please add it, assuming a patch doing so is not already queued elsewhere. > +- reg : Specifies base physical address and size of the MISC area, that is > + where the interrupt controller registers are located Is this area shared with other devices? > +- interrupt-controller : Identifies the node as an interrupt controller > +- #interrupt-cells : Specifies the number of cells needed to encode an > + interrupt source. The value shall be 1. There is no configuration that can be applied to individual interrupt lines (e.g. trigger type)? Thanks, Mark. > + > +Example: > + > + intc: intc@f0000000 { > + compatible = "cnxt,cx92755-ic"; > + interrupt-controller; > + #interrupt-cells = <1>; > + reg = <0xf0000000 0x1000>; > + }; > + > -- > 2.1.4 > > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html