Re: [PATCH v9 1/4] drm/i2c: tda998x: Add DT support for audio

[Russell King - ARM Linux <linux@arm.linux.org.uk>]

On Mon, Jan 12, 2015 at 06:13:41PM +0100, Jean-Francois Moine wrote:
> On Mon, 12 Jan 2015 14:04:56 +0000
> Russell King - ARM Linux <linux@arm.linux.org.uk> wrote:
> > On Mon, Jan 12, 2015 at 02:59:57PM +0100, Philipp Zabel wrote:
> > > Note that of_graph_parse_endpoint interprets the port node's reg
> > > property as port id. And the unit address part of the node name should
> > > match the first address in the reg property.
> 
> This is not the case in vexpress-v2p-ca15_a7.dts.

Hmm... as the DT binding doc doesn't specify this restriction, and we
have a DT file which violates what Philipp has said, I think we ought
to document that reg vs unit node name does not need to match each
other, thereby making that official.

> > So that's not going to work very well... because the AP register is a
> > bitmask.
> > 
> > I guess we could specify a node unit and reg, which the code otherwise
> > ignores, and specify a philipps,ap-mask = property for the audio ports
> > instead.
> 
> Also, the video and audio ports must be distinguished. They could be
> defined in different port groups.
> 
> Example from the Cubox:
> 
> 	video-ports: ports@0 {
> 		port {
> 			tda998x_video: endpoint {
> 				remote-endpoint = <&lcd0_0>;
> 				nxp,video-port = <0x230145>;
> 			};
> 		};
> 	};
> 	audio-ports: ports@1 {
> 		port@0 {			/* AP1 = I2S */
> 			tda998x_i2s: endpoint@0 {
> 				remote-endpoint = <&audio1_i2s>;
> 				nxp,audio-port = <0x03>;
> 			};
> 		};
> 		port@1 {			 /* AP2 = S/PDIF */
> 			tda998x_spdif: endpoint@1 {
> 				remote-endpoint = <&audio1_spdif1>;
> 				nxp,audio-port = <0x04>;
> 			};
> 		};
> 	};
> 
> The port type is identified by the bit AP0.

I don't particularly like that - that makes the assumption that AP0
always means I2S.  What if a future chip decides to allow SPDIF on
AP0?  Why should we need to re-invent the binding?

IMHO, it would be much better to make this explicit.

Note that the "video-ports" and "audio-ports" are just labels in the
DT file; they aren't carried through to the resulting DT binary file,
so they don't have any meaning to the kernel.

-- 
FTTC broadband for 0.8mile line: currently at 10.5Mbps down 400kbps up
according to speedtest.net.
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel