From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andrew Lunn Subject: Re: [PATCH] [linux-next] ARM: mvebu: make DTS comments reflect DEBUG_LL changes Date: Mon, 19 Jan 2015 22:27:18 +0100 Message-ID: <20150119212718.GA2938@lunn.ch> References: <1421696425.9655.65.camel@x220> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <1421696425.9655.65.camel@x220> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Paul Bolle Cc: Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Russell King , Valentin Rothberg , Maxime Ripard , Jason Cooper , Gregory CLEMENT , devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: devicetree@vger.kernel.org On Mon, Jan 19, 2015 at 08:40:25PM +0100, Paul Bolle wrote: > The Kconfig symbol DEBUG_MVEBU_UART_ALTERNATE was renamed to > DEBUG_MVEBU_UART0_ALTERNATE. And the symbol DEBUG_MVEBU_UART1_ALTERNATE > was added to allow UART1 as a DEBUG_LL target. Make the comment at the > top of this DTS reflect those changes. > > Since we're touching this DTS add comments to show which blocks describe > UART0 and UART1. > > Signed-off-by: Paul Bolle Hi Paul Thanks for this. I have added it to mvebu/dt. Andrew > --- > Created on top of next-20150119. Untested! Note that I know nothing > about this board or about DT source files, so all changes are nothing > more than guesses. > > arch/arm/boot/dts/armada-xp-axpwifiap.dts | 6 ++++-- > 1 file changed, 4 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts > index ca0200e20751..28174ab019f9 100644 > --- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts > +++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts > @@ -3,8 +3,8 @@ > * > * Note: this board is shipped with a new generation boot loader that > * remaps internal registers at 0xf1000000. Therefore, if earlyprintk > - * is used, the CONFIG_DEBUG_MVEBU_UART_ALTERNATE option should be > - * used. > + * is used, the CONFIG_DEBUG_MVEBU_UART0_ALTERNATE option or the > + * CONFIG_DEBUG_MVEBU_UART1_ALTERNATE option should be used. > * > * Copyright (C) 2013 Marvell > * > @@ -60,10 +60,12 @@ > }; > > internal-regs { > + /* UART0 */ > serial@12000 { > status = "okay"; > }; > > + /* UART1 */ > serial@12100 { > status = "okay"; > }; > -- > 1.9.3 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html