From: Lee Jones <lee.jones@linaro.org>
To: Steve Twiss <stwiss.opensource@diasemi.com>
Cc: Grant Likely <grant.likely@linaro.org>,
Mark Brown <broonie@linaro.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
Rob Herring <robh+dt@kernel.org>,
Samuel Ortiz <sameo@linux.intel.com>,
DT <devicetree@vger.kernel.org>,
David Dajun Chen <david.chen@diasemi.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
LKML <linux-kernel@vger.kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Pawel Moll <pawel.moll@arm.com>,
Support Opensource <support.opensource@diasemi.com>
Subject: Re: [PATCH V3 1/2] mfd: da9063: Add device tree support
Date: Tue, 20 Jan 2015 17:03:44 +0000 [thread overview]
Message-ID: <20150120170344.GA32437@x1> (raw)
In-Reply-To: <2ab606365e855b081819174235105ba6674c8143.1421762065.git.stwiss.opensource@diasemi.com>
On Tue, 20 Jan 2015, Steve Twiss wrote:
> From: Steve Twiss <stwiss.opensource@diasemi.com>
>
> Add device tree support for DA9063 regulators; Real-Time Clock
> and Watchdog.
>
> This patch is dependent on PATCH V2 2/2
>
> Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com>
>
> ---
> This patch applies against linux-next and v3.19-rc4
>
> drivers/mfd/da9063-core.c | 2 ++
> drivers/mfd/da9063-i2c.c | 9 +++++++++
> include/linux/mfd/da9063/core.h | 1 +
> 3 files changed, 12 insertions(+)
Applied, thanks.
> diff --git a/drivers/mfd/da9063-core.c b/drivers/mfd/da9063-core.c
> index f38bc98..facd361 100644
> --- a/drivers/mfd/da9063-core.c
> +++ b/drivers/mfd/da9063-core.c
> @@ -86,6 +86,7 @@ static const struct mfd_cell da9063_devs[] = {
> },
> {
> .name = DA9063_DRVNAME_WATCHDOG,
> + .of_compatible = "dlg,da9063-watchdog",
> },
> {
> .name = DA9063_DRVNAME_HWMON,
> @@ -101,6 +102,7 @@ static const struct mfd_cell da9063_devs[] = {
> .name = DA9063_DRVNAME_RTC,
> .num_resources = ARRAY_SIZE(da9063_rtc_resources),
> .resources = da9063_rtc_resources,
> + .of_compatible = "dlg,da9063-rtc",
> },
> {
> .name = DA9063_DRVNAME_VIBRATION,
> diff --git a/drivers/mfd/da9063-i2c.c b/drivers/mfd/da9063-i2c.c
> index 21fd8d9..6f3a7c0 100644
> --- a/drivers/mfd/da9063-i2c.c
> +++ b/drivers/mfd/da9063-i2c.c
> @@ -25,6 +25,9 @@
> #include <linux/mfd/da9063/pdata.h>
> #include <linux/mfd/da9063/registers.h>
>
> +#include <linux/of.h>
> +#include <linux/regulator/of_regulator.h>
> +
> static const struct regmap_range da9063_ad_readable_ranges[] = {
> {
> .range_min = DA9063_REG_PAGE_CON,
> @@ -203,6 +206,11 @@ static struct regmap_config da9063_regmap_config = {
> .cache_type = REGCACHE_RBTREE,
> };
>
> +static const struct of_device_id da9063_dt_ids[] = {
> + { .compatible = "dlg,da9063", },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, da9063_dt_ids);
> static int da9063_i2c_probe(struct i2c_client *i2c,
> const struct i2c_device_id *id)
> {
> @@ -257,6 +265,7 @@ static struct i2c_driver da9063_i2c_driver = {
> .driver = {
> .name = "da9063",
> .owner = THIS_MODULE,
> + .of_match_table = of_match_ptr(da9063_dt_ids),
> },
> .probe = da9063_i2c_probe,
> .remove = da9063_i2c_remove,
> diff --git a/include/linux/mfd/da9063/core.h b/include/linux/mfd/da9063/core.h
> index b92a326..79f4d82 100644
> --- a/include/linux/mfd/da9063/core.h
> +++ b/include/linux/mfd/da9063/core.h
> @@ -36,6 +36,7 @@ enum da9063_models {
> enum da9063_variant_codes {
> PMIC_DA9063_AD = 0x3,
> PMIC_DA9063_BB = 0x5,
> + PMIC_DA9063_CA = 0x6,
> };
>
> /* Interrupts */
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
next prev parent reply other threads:[~2015-01-20 17:03 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-20 13:54 [PATCH V3 0/2] Add device tree support for DA9063 Steve Twiss
2015-01-20 13:54 ` [PATCH V3 1/2] mfd: da9063: Add device tree support Steve Twiss
2015-01-20 15:53 ` Lee Jones
2015-01-20 17:03 ` Lee Jones [this message]
2015-01-20 13:54 ` [PATCH V3 2/2] devicetree: Add bindings for DA9063 Steve Twiss
2015-01-20 15:54 ` Lee Jones
2015-01-20 16:35 ` Opensource [Steve Twiss]
2015-01-20 17:04 ` Lee Jones
2015-01-21 7:53 ` Opensource [Steve Twiss]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150120170344.GA32437@x1 \
--to=lee.jones@linaro.org \
--cc=broonie@linaro.org \
--cc=david.chen@diasemi.com \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=grant.likely@linaro.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=p.zabel@pengutronix.de \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=sameo@linux.intel.com \
--cc=stwiss.opensource@diasemi.com \
--cc=support.opensource@diasemi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).