From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andy Gross Subject: Re: [Patch v9 3/3] phy: Add Qualcomm DWC3 HS/SS PHY driver Date: Thu, 22 Jan 2015 15:44:13 -0600 Message-ID: <20150122214413.GA8057@qualcomm.com> References: <1410550088-8754-1-git-send-email-agross@codeaurora.org> <1410550088-8754-4-git-send-email-agross@codeaurora.org> <20150122185914.GA4114@usblab-sd-06.qualcomm.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <20150122185914.GA4114@usblab-sd-06.qualcomm.com> Sender: linux-kernel-owner@vger.kernel.org To: Jack Pham Cc: Felipe Balbi , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Kishon Vijay Abraham I , Kumar Gala , linux-arm-msm@vger.kernel.org, linux-usb@vger.kernel.org, "Ivan T. Ivanov" , Bjorn Andersson List-Id: devicetree@vger.kernel.org On Thu, Jan 22, 2015 at 10:59:14AM -0800, Jack Pham wrote: > Hi Andy, > > On Fri, Sep 12, 2014 at 02:28:08PM -0500, Andy Gross wrote: > > This patch adds a new driver for the Qualcomm USB 3.0 PHY that exists on some > > Qualcomm platforms. This driver uses the generic PHY framework and will > > interact with the DWC3 controller. > > > > Signed-off-by: Andy Gross > > --- > > drivers/phy/Kconfig | 11 + > > drivers/phy/Makefile | 1 + > > drivers/phy/phy-qcom-dwc3.c | 483 +++++++++++++++++++++++++++++++++++++++++++ > > 3 files changed, 495 insertions(+) > > create mode 100644 drivers/phy/phy-qcom-dwc3.c > > What happened to this patch? Looks like [1/3] & [2/3] made it in during > the 3.18 merge, but did this one not get picked up by Kishon? Got sidetracked. I'll rework and resend in. It'll be a couple days. -- Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project