From: Baruch Siach <baruch@tkos.co.il>
To: arm@kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Arnd Bergmann <arnd@arndb.de>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v3 0/4] ARM: Conexant Digicolor CX92755 SoC support
Date: Sun, 25 Jan 2015 20:08:55 +0200 [thread overview]
Message-ID: <20150125180855.GA3148@tarshish> (raw)
In-Reply-To: <cover.1421219953.git.baruch@tkos.co.il>
Hi ARM SoC maintainers,
On Wed, Jan 14, 2015 at 10:40:29AM +0200, Baruch Siach wrote:
> This series adds initial support for the Conexant CX92755 SoC. The CX92755 is
> one of the Digicolor series of SoCs, all sharing many of the same peripherals.
> The code was tested on the CX92755 evaluation kit, AKA Equinox.
>
> Uses attempting to try this code will most likely also want the UART/console
> driver available from https://patchwork.kernel.org/patch/5515861/.
Any chance of having this series merged for 3.20? Arnd has acked this already.
Thanks,
baruch
> v3:
> * Remove earlyprintk from dts bootargs (Arnd Bergmann)
>
> * Move aliases from chip .dtsi to board .dts (Arnd Bergmann)
>
> * Add 'cpus' node (Mark Rutland)
>
> * Add commit log messages to all patches (Arnd Bergmann)
>
> * Add Arnd's ack
>
> * Split arch/arm stuff from the irq and timer drivers
>
> v2:
> http://marc.info/?t=142074613900007&r=1&w=2
>
> * Remove .map_io assignment, debug_ll is enabled by default (Arnd Bergmann)
>
> * Migrate the irq driver to generic irq chip, simplifying the code somewhat
> (Arnd Bergmann)
>
> * Change the timer dt binding, so that the 'reg' property points to the
> first "Agent Communication" register. This should improve the chance of
> reusing this binding for other SoCs in this series.
>
> * Add the CONTROL() and COUNT() macros to the timer driver to make the code
> clearer.
>
> * Move arch/arm Kconfig changes from the clocksource driver patch to the
> base arch support patch to reduce dependency between them
>
> v1:
> http://thread.gmane.org/gmane.linux.kernel/1855027
>
> Baruch Siach (4):
> ARM: initial support for Conexant Digicolor CX92755 SoC
> ARM: digicolor: add low level debug support
> ARM: digicolor: add minimal device tree description
> ARM: devicetree: document supported Conexant Digicolor SoC
>
> .../devicetree/bindings/arm/digicolor.txt | 6 ++
> arch/arm/Kconfig | 2 +
> arch/arm/Kconfig.debug | 12 ++-
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/conexant_equinox.dts | 74 ++++++++++++++
> arch/arm/boot/dts/cx92755.dtsi | 107 +++++++++++++++++++++
> arch/arm/include/debug/digicolor.S | 35 +++++++
> arch/arm/mach-digicolor/Kconfig | 5 +
> arch/arm/mach-digicolor/Makefile | 1 +
> arch/arm/mach-digicolor/digicolor.c | 18 ++++
> 10 files changed, 259 insertions(+), 2 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/arm/digicolor.txt
> create mode 100644 arch/arm/boot/dts/conexant_equinox.dts
> create mode 100644 arch/arm/boot/dts/cx92755.dtsi
> create mode 100644 arch/arm/include/debug/digicolor.S
> create mode 100644 arch/arm/mach-digicolor/Kconfig
> create mode 100644 arch/arm/mach-digicolor/Makefile
> create mode 100644 arch/arm/mach-digicolor/digicolor.c
--
http://baruch.siach.name/blog/ ~. .~ Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
- baruch@tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -
next prev parent reply other threads:[~2015-01-25 18:08 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-14 8:40 [PATCH v3 0/4] ARM: Conexant Digicolor CX92755 SoC support Baruch Siach
2015-01-14 8:40 ` [PATCH v3 1/4] ARM: initial support for Conexant Digicolor CX92755 SoC Baruch Siach
2015-01-27 23:02 ` Olof Johansson
2015-01-14 8:40 ` [PATCH v3 2/4] ARM: digicolor: add low level debug support Baruch Siach
[not found] ` <5b6342c716e2e56da34d7a518b49817967de948a.1421219953.git.baruch-NswTu9S1W3P6gbPvEgmw2w@public.gmane.org>
2015-01-27 23:02 ` Olof Johansson
2015-01-14 8:40 ` [PATCH v3 3/4] ARM: digicolor: add minimal device tree description Baruch Siach
[not found] ` <474d0849bb30ab4ec323fa4c1bc67b30b31d3884.1421219953.git.baruch-NswTu9S1W3P6gbPvEgmw2w@public.gmane.org>
2015-01-27 23:01 ` Olof Johansson
2015-01-28 10:48 ` Baruch Siach
[not found] ` <cover.1421219953.git.baruch-NswTu9S1W3P6gbPvEgmw2w@public.gmane.org>
2015-01-14 8:40 ` [PATCH v3 4/4] ARM: devicetree: document supported Conexant Digicolor SoC Baruch Siach
2015-01-27 23:02 ` Olof Johansson
2015-01-25 18:08 ` Baruch Siach [this message]
2015-01-27 23:03 ` [PATCH v3 0/4] ARM: Conexant Digicolor CX92755 SoC support Olof Johansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150125180855.GA3148@tarshish \
--to=baruch@tkos.co.il \
--cc=arm@kernel.org \
--cc=arnd@arndb.de \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).