From mboxrd@z Thu Jan 1 00:00:00 1970 From: Maxime Ripard Subject: Re: [PATCH v3] ARM: dts: sun7i: Add dts file for pcDuino 3 Nano board Date: Tue, 27 Jan 2015 19:41:02 +0100 Message-ID: <20150127184102.GL7200@lukather> References: <1422383265-6393-1-git-send-email-ats@offog.org> Reply-To: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="4ybNbZnZ8tziJ7D6" Return-path: Content-Disposition: inline In-Reply-To: <1422383265-6393-1-git-send-email-ats-G+91BasbrijYtjvyW6yDsg@public.gmane.org> List-Post: , List-Help: , List-Archive: , List-Unsubscribe: , To: Adam Sampson Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org List-Id: devicetree@vger.kernel.org --4ybNbZnZ8tziJ7D6 Content-Type: text/plain; charset=UTF-8 Content-Disposition: inline On Tue, Jan 27, 2015 at 06:27:45PM +0000, Adam Sampson wrote: > Add support for the LinkSprite pcDuino 3 Nano board. This is a low-cost > Allwinner A20 board with Arduino-style GPIO headers; it features 1G RAM, > 4G NAND flash, 1 micro-SD, 2 USB sockets, 1 micro USB socket for OTG and > another for power in, HDMI, SATA, 5V power for SATA devices, gigabit > Ethernet, an IR receiver, 3.5mm audio out and a MIPI camera connector. > > For more details, see: http://linux-sunxi.org/LinkSprite_pcDuino3_Nano > > Changes in v3: > - rename LEDs to pcduino3-nano:green:usr[12] > - remove optional features on Arduino headers (i2c2, spi0, uart2) > > Signed-off-by: Adam Sampson Applied, thanks. Note that it will probably only show up in 3.21. The pull requests for 3.20 have been sent this week end, and unless something major and unexpected shows up, I won't send others. Thanks, Maxime -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com --4ybNbZnZ8tziJ7D6--