[PATCH v5 0/4] st33zp24 new architecture proposal and st33zp24 spi driver

[PATCH v5 0/4] st33zp24 new architecture proposal and st33zp24 spi driver

[Christophe Ricard]

Hi,

The following patchset:
- propose a new architecture allowing to share a core st33zp24 data management
layer with different phy (i2c & spi). For st33zp24 both phy have a proprietary transport
protocol. Both are relying on the TCG TIS protocol. At the end, it simplifies the maintenance.
- Add an spi phy allowing to support st33zp24 using with an SPI bus.

The complete solution got tested in polling and interrupt mode successfully with i2c & spi phy.
This patchset applies on top of Peter's tree https://github.com/PeterHuewe/linux-tpmdd.git for-james branch
on top of:
d4989d9f693b9502f9288da5db279c2f8c2e50be tpm/tpm_tis: Add missing ifdef CONFIG_ACPI for pnp_acpi_device

I confirm also Jarkko Sakkinen's changes are working with this product with both phy's.

- v2 takes into account feedbacks from Jason Gunthorpe.
- v3 is reduced to 4 patches as 6 out of 10 got accepted for 3.20. Also compare to v2:
        * Fix build issue with patch v2 04/10 "Replace access to io_lpcpd from struct st33zp24_platform_data to tpm_stm_dev"
        * Fix link issue with patch v2 08/10 "Split tpm_i2c_tpm_st33 in 2 layers (core + phy)" when building as a module.
        The symbols wasn't exported in st33zp24.c.
        * Add missing MODULE_LICENSE in patch v2 09/10 "Add st33zp24 spi phy"
        * Fix node example in dts spi documentation in patch v2 10/10 "Add dts documentation for st33zp24 spi phy"
        * Fix typo on Jason Gunthorpe first name. Sorry for that :(...
        * Change contact email address as tpmsupport-qxv4g6HH51o@public.gmane.org is no more valid
- v4 adds missing module_license in st33zp24
- v5 includes as best as possible PeterHuewe comments.

Best Regards
Christophe

Christophe Ricard (4):
  tpm/tpm_i2c_stm_st33: Replace access to io_lpcpd from struct
    st33zp24_platform_data to tpm_stm_dev
  tpm/tpm_i2c_stm_st33: Split tpm_i2c_tpm_st33 in 2 layers (core + phy)
  tpm/st33zp24/spi: Add st33zp24 spi phy
  tpm/st33zp24/dts/st33zp24-spi: Add dts documentation for st33zp24 spi
    phy

 .../bindings/security/tpm/st33zp24-spi.txt         |  34 +
 drivers/char/tpm/Kconfig                           |  11 +-
 drivers/char/tpm/Makefile                          |   2 +-
 drivers/char/tpm/st33zp24/Kconfig                  |  30 +
 drivers/char/tpm/st33zp24/Makefile                 |  12 +
 drivers/char/tpm/st33zp24/i2c.c                    | 276 +++++++
 drivers/char/tpm/st33zp24/spi.c                    | 386 +++++++++
 drivers/char/tpm/st33zp24/st33zp24.c               | 688 ++++++++++++++++
 drivers/char/tpm/st33zp24/st33zp24.h               |  37 +
 drivers/char/tpm/tpm_i2c_stm_st33.c                | 911 ---------------------
 include/linux/platform_data/st33zp24.h             |  28 +
 include/linux/platform_data/tpm_stm_st33.h         |  39 -
 12 files changed, 1493 insertions(+), 961 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt
 create mode 100644 drivers/char/tpm/st33zp24/Kconfig
 create mode 100644 drivers/char/tpm/st33zp24/Makefile
 create mode 100644 drivers/char/tpm/st33zp24/i2c.c
 create mode 100644 drivers/char/tpm/st33zp24/spi.c
 create mode 100644 drivers/char/tpm/st33zp24/st33zp24.c
 create mode 100644 drivers/char/tpm/st33zp24/st33zp24.h
 delete mode 100644 drivers/char/tpm/tpm_i2c_stm_st33.c
 create mode 100644 include/linux/platform_data/st33zp24.h
 delete mode 100644 include/linux/platform_data/tpm_stm_st33.h

-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v5 1/4] tpm/tpm_i2c_stm_st33: Replace access to io_lpcpd from struct st33zp24_platform_data to tpm_stm_dev

[Christophe Ricard]

io_lpcpd is accessible from struct tpm_stm_dev.
struct st33zp24_platform_data is only valid when using static platform
configuration data, not when using dts.

Reviewed-by: Jason Gunthorpe <jason.gunthorpe-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>
Signed-off-by: Christophe Ricard <christophe-h.ricard-qxv4g6HH51o@public.gmane.org>
---
 drivers/char/tpm/tpm_i2c_stm_st33.c | 18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)

diff --git a/drivers/char/tpm/tpm_i2c_stm_st33.c b/drivers/char/tpm/tpm_i2c_stm_st33.c
index 612845b..882c60a 100644
--- a/drivers/char/tpm/tpm_i2c_stm_st33.c
+++ b/drivers/char/tpm/tpm_i2c_stm_st33.c
@@ -837,11 +837,14 @@ static int tpm_stm_i2c_remove(struct i2c_client *client)
  */
 static int tpm_stm_i2c_pm_suspend(struct device *dev)
 {
-	struct st33zp24_platform_data *pin_infos = dev->platform_data;
+	struct tpm_chip *chip = dev_get_drvdata(dev);
+	struct tpm_stm_dev *tpm_dev;
 	int ret = 0;
 
-	if (gpio_is_valid(pin_infos->io_lpcpd))
-		gpio_set_value(pin_infos->io_lpcpd, 0);
+	tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip);
+
+	if (gpio_is_valid(tpm_dev->io_lpcpd))
+		gpio_set_value(tpm_dev->io_lpcpd, 0);
 	else
 		ret = tpm_pm_suspend(dev);
 
@@ -856,12 +859,13 @@ static int tpm_stm_i2c_pm_suspend(struct device *dev)
 static int tpm_stm_i2c_pm_resume(struct device *dev)
 {
 	struct tpm_chip *chip = dev_get_drvdata(dev);
-	struct st33zp24_platform_data *pin_infos = dev->platform_data;
-
+	struct tpm_stm_dev *tpm_dev;
 	int ret = 0;
 
-	if (gpio_is_valid(pin_infos->io_lpcpd)) {
-		gpio_set_value(pin_infos->io_lpcpd, 1);
+	tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip);
+
+	if (gpio_is_valid(tpm_dev->io_lpcpd)) {
+		gpio_set_value(tpm_dev->io_lpcpd, 1);
 		ret = wait_for_stat(chip,
 				TPM_STS_VALID, chip->vendor.timeout_b,
 				&chip->vendor.read_queue, false);
-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v5 2/4] tpm/tpm_i2c_stm_st33: Split tpm_i2c_tpm_st33 in 2 layers (core + phy)

[Christophe Ricard]

tpm_i2c_stm_st33 is a TIS 1.2 TPM with a core interface which can be used
by different phy such as i2c or spi. The core part is called st33zp24 which
is also the main part reference.

include/linux/platform_data/tpm_stm_st33.h is renamed consequently.
The driver is also split into an i2c phy in charge of sending/receiving
data as well as managing platform data or dts configuration.

Reviewed-by: Jason Gunthorpe <jason.gunthorpe-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>
Signed-off-by: Christophe Ricard <christophe-h.ricard-qxv4g6HH51o@public.gmane.org>
---
 drivers/char/tpm/Kconfig                   |  11 +-
 drivers/char/tpm/Makefile                  |   2 +-
 drivers/char/tpm/st33zp24/Kconfig          |  20 +
 drivers/char/tpm/st33zp24/Makefile         |   9 +
 drivers/char/tpm/st33zp24/i2c.c            | 278 +++++++++
 drivers/char/tpm/st33zp24/st33zp24.c       | 688 ++++++++++++++++++++++
 drivers/char/tpm/st33zp24/st33zp24.h       |  34 ++
 drivers/char/tpm/tpm_i2c_stm_st33.c        | 915 -----------------------------
 include/linux/platform_data/st33zp24.h     |  28 +
 include/linux/platform_data/tpm_stm_st33.h |  39 --
 10 files changed, 1059 insertions(+), 965 deletions(-)
 create mode 100644 drivers/char/tpm/st33zp24/Kconfig
 create mode 100644 drivers/char/tpm/st33zp24/Makefile
 create mode 100644 drivers/char/tpm/st33zp24/i2c.c
 create mode 100644 drivers/char/tpm/st33zp24/st33zp24.c
 create mode 100644 drivers/char/tpm/st33zp24/st33zp24.h
 delete mode 100644 drivers/char/tpm/tpm_i2c_stm_st33.c
 create mode 100644 include/linux/platform_data/st33zp24.h
 delete mode 100644 include/linux/platform_data/tpm_stm_st33.h

diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig
index 9d4e375..2dc16d3 100644
--- a/drivers/char/tpm/Kconfig
+++ b/drivers/char/tpm/Kconfig
@@ -100,16 +100,6 @@ config TCG_IBMVTPM
 	  will be accessible from within Linux.  To compile this driver
 	  as a module, choose M here; the module will be called tpm_ibmvtpm.
 
-config TCG_TIS_I2C_ST33
-	tristate "TPM Interface Specification 1.2 Interface (I2C - STMicroelectronics)"
-	depends on I2C
-	depends on GPIOLIB
-	---help---
-	  If you have a TPM security chip from STMicroelectronics working with
-	  an I2C bus say Yes and it will be accessible from within Linux.
-	  To compile this driver as a module, choose M here; the module will be
-	  called tpm_i2c_stm_st33.
-
 config TCG_XEN
 	tristate "XEN TPM Interface"
 	depends on TCG_TPM && XEN
@@ -131,4 +121,5 @@ config TCG_CRB
 	  from within Linux.  To compile this driver as a module, choose
 	  M here; the module will be called tpm_crb.
 
+source "drivers/char/tpm/st33zp24/Kconfig"
 endif # TCG_TPM
diff --git a/drivers/char/tpm/Makefile b/drivers/char/tpm/Makefile
index 990cf18..56e8f1f 100644
--- a/drivers/char/tpm/Makefile
+++ b/drivers/char/tpm/Makefile
@@ -20,6 +20,6 @@ obj-$(CONFIG_TCG_NSC) += tpm_nsc.o
 obj-$(CONFIG_TCG_ATMEL) += tpm_atmel.o
 obj-$(CONFIG_TCG_INFINEON) += tpm_infineon.o
 obj-$(CONFIG_TCG_IBMVTPM) += tpm_ibmvtpm.o
-obj-$(CONFIG_TCG_TIS_I2C_ST33) += tpm_i2c_stm_st33.o
+obj-$(CONFIG_TCG_TIS_ST33ZP24) += st33zp24/
 obj-$(CONFIG_TCG_XEN) += xen-tpmfront.o
 obj-$(CONFIG_TCG_CRB) += tpm_crb.o
diff --git a/drivers/char/tpm/st33zp24/Kconfig b/drivers/char/tpm/st33zp24/Kconfig
new file mode 100644
index 0000000..51dcef5
--- /dev/null
+++ b/drivers/char/tpm/st33zp24/Kconfig
@@ -0,0 +1,20 @@
+config TCG_TIS_ST33ZP24
+	tristate "STMicroelectronics TPM Interface Specification 1.2 Interface"
+	depends on GPIOLIB
+	---help---
+	  STMicroelectronics ST33ZP24 core driver. It implements the core
+	  TPM1.2 logic and hooks into the TPM kernel APIs. Physical layers will
+	  register against it.
+
+	  To compile this driver as a module, choose m here. The module will be called
+	  tpm_st33zp24.
+
+config TCG_TIS_ST33ZP24_I2C
+	tristate "TPM 1.2 ST33ZP24 I2C support"
+	depends on TCG_TIS_ST33ZP24
+	depends on I2C
+	---help---
+	  This module adds support for the STMicroelectronics TPM security chip
+	  ST33ZP24 with i2c interface.
+	  To compile this driver as a module, choose M here; the module will be
+	  called tpm_st33zp24_i2c.
diff --git a/drivers/char/tpm/st33zp24/Makefile b/drivers/char/tpm/st33zp24/Makefile
new file mode 100644
index 0000000..414497f
--- /dev/null
+++ b/drivers/char/tpm/st33zp24/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for ST33ZP24 TPM 1.2 driver
+#
+
+tpm_st33zp24-objs = st33zp24.o
+obj-$(CONFIG_TCG_TIS_ST33ZP24) += tpm_st33zp24.o
+
+tpm_st33zp24_i2c-objs = i2c.o
+obj-$(CONFIG_TCG_TIS_ST33ZP24_I2C) += tpm_st33zp24_i2c.o
diff --git a/drivers/char/tpm/st33zp24/i2c.c b/drivers/char/tpm/st33zp24/i2c.c
new file mode 100644
index 0000000..95e3091
--- /dev/null
+++ b/drivers/char/tpm/st33zp24/i2c.c
@@ -0,0 +1,278 @@
+/*
+ * STMicroelectronics TPM I2C Linux driver for TPM ST33ZP24
+ * Copyright (C) 2009 - 2015 STMicroelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/of_irq.h>
+#include <linux/of_gpio.h>
+#include <linux/tpm.h>
+#include <linux/platform_data/st33zp24.h>
+
+#include "st33zp24.h"
+
+#define TPM_DUMMY_BYTE			0xAA
+#define TPM_WRITE_DIRECTION		0x80
+#define TPM_BUFSIZE			2048
+
+struct st33zp24_i2c_phy {
+	struct i2c_client *client;
+	u8 buf[TPM_BUFSIZE + 1];
+	int io_lpcpd;
+};
+
+/*
+ * write8_reg
+ * Send byte to the TIS register according to the ST33ZP24 I2C protocol.
+ * @param: tpm_register, the tpm tis register where the data should be written
+ * @param: tpm_data, the tpm_data to write inside the tpm_register
+ * @param: tpm_size, The length of the data
+ * @return: Returns negative errno, or else the number of bytes written.
+ */
+static int write8_reg(void *phy_id, u8 tpm_register, u8 *tpm_data, int tpm_size)
+{
+	struct st33zp24_i2c_phy *phy = phy_id;
+
+	phy->buf[0] = tpm_register;
+	memcpy(phy->buf + 1, tpm_data, tpm_size);
+	return i2c_master_send(phy->client, phy->buf, tpm_size + 1);
+} /* write8_reg() */
+
+/*
+ * read8_reg
+ * Recv byte from the TIS register according to the ST33ZP24 I2C protocol.
+ * @param: tpm_register, the tpm tis register where the data should be read
+ * @param: tpm_data, the TPM response
+ * @param: tpm_size, tpm TPM response size to read.
+ * @return: number of byte read successfully: should be one if success.
+ */
+static int read8_reg(void *phy_id, u8 tpm_register, u8 *tpm_data, int tpm_size)
+{
+	struct st33zp24_i2c_phy *phy = phy_id;
+	u8 status = 0;
+	u8 data;
+
+	data = TPM_DUMMY_BYTE;
+	status = write8_reg(phy, tpm_register, &data, 1);
+	if (status == 2)
+		status = i2c_master_recv(phy->client, tpm_data, tpm_size);
+	return status;
+} /* read8_reg() */
+
+/*
+ * st33zp24_i2c_send
+ * Send byte to the TIS register according to the ST33ZP24 I2C protocol.
+ * @param: phy_id, the phy description
+ * @param: tpm_register, the tpm tis register where the data should be written
+ * @param: tpm_data, the tpm_data to write inside the tpm_register
+ * @param: tpm_size, the length of the data
+ * @return: number of byte written successfully: should be one if success.
+ */
+static int st33zp24_i2c_send(void *phy_id, u8 tpm_register, u8 *tpm_data,
+			     int tpm_size)
+{
+	return write8_reg(phy_id, tpm_register | TPM_WRITE_DIRECTION, tpm_data,
+			  tpm_size);
+}
+
+/*
+ * st33zp24_i2c_recv
+ * Recv byte from the TIS register according to the ST33ZP24 I2C protocol.
+ * @param: phy_id, the phy description
+ * @param: tpm_register, the tpm tis register where the data should be read
+ * @param: tpm_data, the TPM response
+ * @param: tpm_size, tpm TPM response size to read.
+ * @return: number of byte read successfully: should be one if success.
+ */
+static int st33zp24_i2c_recv(void *phy_id, u8 tpm_register, u8 *tpm_data,
+			     int tpm_size)
+{
+	return read8_reg(phy_id, tpm_register, tpm_data, tpm_size);
+}
+
+static const struct st33zp24_phy_ops i2c_phy_ops = {
+	.send = st33zp24_i2c_send,
+	.recv = st33zp24_i2c_recv,
+};
+
+#ifdef CONFIG_OF
+static int st33zp24_i2c_of_request_resources(struct st33zp24_i2c_phy *phy)
+{
+	struct device_node *pp;
+	struct i2c_client *client = phy->client;
+	int gpio;
+	int ret;
+
+	pp = client->dev.of_node;
+	if (!pp) {
+		dev_err(&client->dev, "No platform data\n");
+		return -ENODEV;
+	}
+
+	/* Get GPIO from device tree */
+	gpio = of_get_named_gpio(pp, "lpcpd-gpios", 0);
+	if (gpio < 0) {
+		dev_err(&client->dev,
+			"Failed to retrieve lpcpd-gpios from dts.\n");
+		phy->io_lpcpd = -1;
+		/*
+		 * lpcpd pin is not specified. This is not an issue as
+		 * power management can be also managed by TPM specific
+		 * commands. So leave with a success status code.
+		 */
+		return 0;
+	}
+	/* GPIO request and configuration */
+	ret = devm_gpio_request_one(&client->dev, gpio,
+			GPIOF_OUT_INIT_HIGH, "TPM IO LPCPD");
+	if (ret) {
+		dev_err(&client->dev, "Failed to request lpcpd pin\n");
+		return -ENODEV;
+	}
+	phy->io_lpcpd = gpio;
+
+	return 0;
+}
+#else
+static int st33zp24_i2c_of_request_resources(struct st33zp24_i2c_phy *phy)
+{
+	return -ENODEV;
+}
+#endif
+
+static int st33zp24_i2c_request_resources(struct i2c_client *client,
+					  struct st33zp24_i2c_phy *phy)
+{
+	struct st33zp24_platform_data *pdata;
+	int ret;
+
+	pdata = client->dev.platform_data;
+	if (!pdata) {
+		dev_err(&client->dev, "No platform data\n");
+		return -ENODEV;
+	}
+
+	/* store for late use */
+	phy->io_lpcpd = pdata->io_lpcpd;
+
+	if (gpio_is_valid(pdata->io_lpcpd)) {
+		ret = devm_gpio_request_one(&client->dev,
+				pdata->io_lpcpd, GPIOF_OUT_INIT_HIGH,
+				"TPM IO_LPCPD");
+		if (ret) {
+			dev_err(&client->dev, "Failed to request lpcpd pin\n");
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * st33zp24_i2c_probe initialize the TPM device
+ * @param: client, the i2c_client drescription (TPM I2C description).
+ * @param: id, the i2c_device_id struct.
+ * @return: 0 in case of success.
+ *	 -1 in other case.
+ */
+static int st33zp24_i2c_probe(struct i2c_client *client,
+			      const struct i2c_device_id *id)
+{
+	int ret;
+	struct st33zp24_platform_data *pdata;
+	struct st33zp24_i2c_phy *phy;
+
+	if (!client) {
+		pr_info("%s: i2c client is NULL. Device not accessible.\n",
+			__func__);
+		return -ENODEV;
+	}
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+		dev_info(&client->dev, "client not i2c capable\n");
+		return -ENODEV;
+	}
+
+	phy = devm_kzalloc(&client->dev, sizeof(struct st33zp24_i2c_phy),
+			   GFP_KERNEL);
+	if (!phy)
+		return -ENOMEM;
+
+	phy->client = client;
+	pdata = client->dev.platform_data;
+	if (!pdata && client->dev.of_node) {
+		ret = st33zp24_i2c_of_request_resources(phy);
+		if (ret)
+			return ret;
+	} else if (pdata) {
+		ret = st33zp24_i2c_request_resources(client, phy);
+		if (ret)
+			return ret;
+	}
+
+	return st33zp24_probe(phy, &i2c_phy_ops, &client->dev, client->irq,
+			      phy->io_lpcpd);
+}
+
+/*
+ * st33zp24_i2c_remove remove the TPM device
+ * @param: client, the i2c_client description (TPM I2C description).
+ * @return: 0 in case of success.
+ */
+static int st33zp24_i2c_remove(struct i2c_client *client)
+{
+	struct tpm_chip *chip = i2c_get_clientdata(client);
+
+	return st33zp24_remove(chip);
+}
+
+static const struct i2c_device_id st33zp24_i2c_id[] = {
+	{TPM_ST33_I2C, 0},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, st33zp24_i2c_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id of_st33zp24_i2c_match[] = {
+	{ .compatible = "st,st33zp24-i2c", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, of_st33zp24_i2c_match);
+#endif
+
+static SIMPLE_DEV_PM_OPS(st33zp24_i2c_ops, st33zp24_pm_suspend,
+			 st33zp24_pm_resume);
+
+static struct i2c_driver st33zp24_i2c_driver = {
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = TPM_ST33_I2C,
+		.pm = &st33zp24_i2c_ops,
+		.of_match_table = of_match_ptr(of_st33zp24_i2c_match),
+	},
+	.probe = st33zp24_i2c_probe,
+	.remove = st33zp24_i2c_remove,
+	.id_table = st33zp24_i2c_id
+};
+
+module_i2c_driver(st33zp24_i2c_driver);
+
+MODULE_AUTHOR("TPM support (TPMsupport-nkJGhpqTU55BDgjK7y7TUQ@public.gmane.org)");
+MODULE_DESCRIPTION("STM TPM 1.2 I2C ST33 Driver");
+MODULE_VERSION("1.3.0");
+MODULE_LICENSE("GPL");
diff --git a/drivers/char/tpm/st33zp24/st33zp24.c b/drivers/char/tpm/st33zp24/st33zp24.c
new file mode 100644
index 0000000..0aceb0e
--- /dev/null
+++ b/drivers/char/tpm/st33zp24/st33zp24.c
@@ -0,0 +1,688 @@
+/*
+ * STMicroelectronics TPM Linux driver for TPM ST33ZP24
+ * Copyright (C) 2009 - 2015 STMicroelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/miscdevice.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/wait.h>
+#include <linux/freezer.h>
+#include <linux/string.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/sched.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+
+#include "../tpm.h"
+#include "st33zp24.h"
+
+#define TPM_ACCESS			0x0
+#define TPM_STS				0x18
+#define TPM_DATA_FIFO			0x24
+#define TPM_INTF_CAPABILITY		0x14
+#define TPM_INT_STATUS			0x10
+#define TPM_INT_ENABLE			0x08
+
+#define LOCALITY0			0
+
+enum st33zp24_access {
+	TPM_ACCESS_VALID = 0x80,
+	TPM_ACCESS_ACTIVE_LOCALITY = 0x20,
+	TPM_ACCESS_REQUEST_PENDING = 0x04,
+	TPM_ACCESS_REQUEST_USE = 0x02,
+};
+
+enum st33zp24_status {
+	TPM_STS_VALID = 0x80,
+	TPM_STS_COMMAND_READY = 0x40,
+	TPM_STS_GO = 0x20,
+	TPM_STS_DATA_AVAIL = 0x10,
+	TPM_STS_DATA_EXPECT = 0x08,
+};
+
+enum st33zp24_int_flags {
+	TPM_GLOBAL_INT_ENABLE = 0x80,
+	TPM_INTF_CMD_READY_INT = 0x080,
+	TPM_INTF_FIFO_AVALAIBLE_INT = 0x040,
+	TPM_INTF_WAKE_UP_READY_INT = 0x020,
+	TPM_INTF_LOCALITY_CHANGE_INT = 0x004,
+	TPM_INTF_STS_VALID_INT = 0x002,
+	TPM_INTF_DATA_AVAIL_INT = 0x001,
+};
+
+enum tis_defaults {
+	TIS_SHORT_TIMEOUT = 750,
+	TIS_LONG_TIMEOUT = 2000,
+};
+
+struct st33zp24_dev {
+	struct tpm_chip *chip;
+	void *phy_id;
+	const struct st33zp24_phy_ops *ops;
+	u32 intrs;
+	int io_lpcpd;
+};
+
+/*
+ * clear_interruption clear the pending interrupt.
+ * @param: tpm_dev, the tpm device device.
+ * @return: the interrupt status value.
+ */
+static u8 clear_interruption(struct st33zp24_dev *tpm_dev)
+{
+	u8 interrupt;
+
+	tpm_dev->ops->recv(tpm_dev->phy_id, TPM_INT_STATUS, &interrupt, 1);
+	tpm_dev->ops->send(tpm_dev->phy_id, TPM_INT_STATUS, &interrupt, 1);
+	return interrupt;
+} /* clear_interruption() */
+
+/*
+ * st33zp24_cancel, cancel the current command execution or
+ * set STS to COMMAND READY.
+ * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h
+ */
+static void st33zp24_cancel(struct tpm_chip *chip)
+{
+	struct st33zp24_dev *tpm_dev;
+	u8 data;
+
+	tpm_dev = (struct st33zp24_dev *)TPM_VPRIV(chip);
+
+	data = TPM_STS_COMMAND_READY;
+	tpm_dev->ops->send(tpm_dev->phy_id, TPM_STS, &data, 1);
+} /* st33zp24_cancel() */
+
+/*
+ * st33zp24_status return the TPM_STS register
+ * @param: chip, the tpm chip description
+ * @return: the TPM_STS register value.
+ */
+static u8 st33zp24_status(struct tpm_chip *chip)
+{
+	struct st33zp24_dev *tpm_dev;
+	u8 data;
+
+	tpm_dev = (struct st33zp24_dev *)TPM_VPRIV(chip);
+
+	tpm_dev->ops->recv(tpm_dev->phy_id, TPM_STS, &data, 1);
+	return data;
+} /* st33zp24_status() */
+
+/*
+ * check_locality if the locality is active
+ * @param: chip, the tpm chip description
+ * @return: the active locality or -EACCESS.
+ */
+static int check_locality(struct tpm_chip *chip)
+{
+	struct st33zp24_dev *tpm_dev;
+	u8 data;
+	u8 status;
+
+	tpm_dev = (struct st33zp24_dev *)TPM_VPRIV(chip);
+
+	status = tpm_dev->ops->recv(tpm_dev->phy_id, TPM_ACCESS, &data, 1);
+	if (status && (data &
+		(TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) ==
+		(TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID))
+		return chip->vendor.locality;
+
+	return -EACCES;
+} /* check_locality() */
+
+/*
+ * request_locality request the TPM locality
+ * @param: chip, the chip description
+ * @return: the active locality or negative value.
+ */
+static int request_locality(struct tpm_chip *chip)
+{
+	unsigned long stop;
+	long ret;
+	struct st33zp24_dev *tpm_dev;
+	u8 data;
+
+	if (check_locality(chip) == chip->vendor.locality)
+		return chip->vendor.locality;
+
+	tpm_dev = (struct st33zp24_dev *)TPM_VPRIV(chip);
+
+	data = TPM_ACCESS_REQUEST_USE;
+	ret = tpm_dev->ops->send(tpm_dev->phy_id, TPM_ACCESS, &data, 1);
+	if (ret < 0)
+		return ret;
+
+	stop = jiffies + chip->vendor.timeout_a;
+
+	/* Request locality is usually effective after the request */
+	do {
+		if (check_locality(chip) >= 0)
+			return chip->vendor.locality;
+		msleep(TPM_TIMEOUT);
+	} while (time_before(jiffies, stop));
+
+	/* could not get locality */
+	return -EACCES;
+} /* request_locality() */
+
+/*
+ * release_locality release the active locality
+ * @param: chip, the tpm chip description.
+ */
+static void release_locality(struct tpm_chip *chip)
+{
+	struct st33zp24_dev *tpm_dev;
+	u8 data;
+
+	tpm_dev = (struct st33zp24_dev *)TPM_VPRIV(chip);
+	data = TPM_ACCESS_ACTIVE_LOCALITY;
+
+	tpm_dev->ops->send(tpm_dev->phy_id, TPM_ACCESS, &data, 1);
+}
+
+/*
+ * get_burstcount return the burstcount value
+ * @param: chip, the chip description
+ * return: the burstcount or negative value.
+ */
+static int get_burstcount(struct tpm_chip *chip)
+{
+	unsigned long stop;
+	int burstcnt, status;
+	u8 tpm_reg, temp;
+	struct st33zp24_dev *tpm_dev;
+
+	tpm_dev = (struct st33zp24_dev *)TPM_VPRIV(chip);
+
+	stop = jiffies + chip->vendor.timeout_d;
+	do {
+		tpm_reg = TPM_STS + 1;
+		status = tpm_dev->ops->recv(tpm_dev->phy_id, tpm_reg, &temp, 1);
+		if (status < 0)
+			return -EBUSY;
+
+		tpm_reg = TPM_STS + 1;
+		burstcnt = temp;
+		status = tpm_dev->ops->recv(tpm_dev->phy_id, tpm_reg, &temp, 1);
+		if (status < 0)
+			return -EBUSY;
+
+		burstcnt |= temp << 8;
+		if (burstcnt)
+			return burstcnt;
+		msleep(TPM_TIMEOUT);
+	} while (time_before(jiffies, stop));
+	return -EBUSY;
+} /* get_burstcount() */
+
+
+/*
+ * wait_for_tpm_stat_cond
+ * @param: chip, chip description
+ * @param: mask, expected mask value
+ * @param: check_cancel, does the command expected to be canceled ?
+ * @param: canceled, did we received a cancel request ?
+ * @return: true if status == mask or if the command is canceled.
+ * false in other cases.
+ */
+static bool wait_for_tpm_stat_cond(struct tpm_chip *chip, u8 mask,
+				bool check_cancel, bool *canceled)
+{
+	u8 status = chip->ops->status(chip);
+
+	*canceled = false;
+	if ((status & mask) == mask)
+		return true;
+	if (check_cancel && chip->ops->req_canceled(chip, status)) {
+		*canceled = true;
+		return true;
+	}
+	return false;
+}
+
+/*
+ * wait_for_stat wait for a TPM_STS value
+ * @param: chip, the tpm chip description
+ * @param: mask, the value mask to wait
+ * @param: timeout, the timeout
+ * @param: queue, the wait queue.
+ * @param: check_cancel, does the command can be cancelled ?
+ * @return: the tpm status, 0 if success, -ETIME if timeout is reached.
+ */
+static int wait_for_stat(struct tpm_chip *chip, u8 mask, unsigned long timeout,
+			wait_queue_head_t *queue, bool check_cancel)
+{
+	unsigned long stop;
+	int ret;
+	bool canceled = false;
+	bool condition;
+	u32 cur_intrs;
+	u8 status;
+	struct st33zp24_dev *tpm_dev;
+
+	tpm_dev = (struct st33zp24_dev *)TPM_VPRIV(chip);
+
+	/* check current status */
+	status = st33zp24_status(chip);
+	if ((status & mask) == mask)
+		return 0;
+
+	stop = jiffies + timeout;
+
+	if (chip->vendor.irq) {
+		cur_intrs = tpm_dev->intrs;
+		clear_interruption(tpm_dev);
+		enable_irq(chip->vendor.irq);
+
+		do {
+			if (ret == -ERESTARTSYS && freezing(current))
+				clear_thread_flag(TIF_SIGPENDING);
+
+			timeout = stop - jiffies;
+			if ((long) timeout <= 0)
+				return -1;
+
+			ret = wait_event_interruptible_timeout(*queue,
+						cur_intrs != tpm_dev->intrs,
+						timeout);
+			clear_interruption(tpm_dev);
+			condition = wait_for_tpm_stat_cond(chip, mask,
+						check_cancel, &canceled);
+			if (ret >= 0 && condition) {
+				if (canceled)
+					return -ECANCELED;
+				return 0;
+			}
+		} while (ret == -ERESTARTSYS && freezing(current));
+
+		disable_irq_nosync(chip->vendor.irq);
+
+	} else {
+		do {
+			msleep(TPM_TIMEOUT);
+			status = chip->ops->status(chip);
+			if ((status & mask) == mask)
+				return 0;
+		} while (time_before(jiffies, stop));
+	}
+
+	return -ETIME;
+} /* wait_for_stat() */
+
+/*
+ * recv_data receive data
+ * @param: chip, the tpm chip description
+ * @param: buf, the buffer where the data are received
+ * @param: count, the number of data to receive
+ * @return: the number of bytes read from TPM FIFO.
+ */
+static int recv_data(struct tpm_chip *chip, u8 *buf, size_t count)
+{
+	int size = 0, burstcnt, len, ret;
+	struct st33zp24_dev *tpm_dev;
+
+	tpm_dev = (struct st33zp24_dev *)TPM_VPRIV(chip);
+
+	while (size < count &&
+	       wait_for_stat(chip,
+			     TPM_STS_DATA_AVAIL | TPM_STS_VALID,
+			     chip->vendor.timeout_c,
+			     &chip->vendor.read_queue, true) == 0) {
+		burstcnt = get_burstcount(chip);
+		if (burstcnt < 0)
+			return burstcnt;
+		len = min_t(int, burstcnt, count - size);
+		ret = tpm_dev->ops->recv(tpm_dev->phy_id, TPM_DATA_FIFO,
+					 buf + size, len);
+		if (ret < 0)
+			return ret;
+
+		size += len;
+	}
+	return size;
+}
+
+/*
+ * tpm_ioserirq_handler the serirq irq handler
+ * @param: irq, the tpm chip description
+ * @param: dev_id, the description of the chip
+ * @return: the status of the handler.
+ */
+static irqreturn_t tpm_ioserirq_handler(int irq, void *dev_id)
+{
+	struct tpm_chip *chip = dev_id;
+	struct st33zp24_dev *tpm_dev;
+
+	tpm_dev = (struct st33zp24_dev *)TPM_VPRIV(chip);
+
+	tpm_dev->intrs++;
+	wake_up_interruptible(&chip->vendor.read_queue);
+	disable_irq_nosync(chip->vendor.irq);
+
+	return IRQ_HANDLED;
+} /* tpm_ioserirq_handler() */
+
+/*
+ * st33zp24_send send TPM commands through the I2C bus.
+ *
+ * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h
+ * @param: buf,	the buffer to send.
+ * @param: count, the number of bytes to send.
+ * @return: In case of success the number of bytes sent.
+ *			In other case, a < 0 value describing the issue.
+ */
+static int st33zp24_send(struct tpm_chip *chip, unsigned char *buf,
+			 size_t len)
+{
+	u32 status, i, size;
+	int burstcnt = 0;
+	int ret;
+	u8 data;
+	struct st33zp24_dev *tpm_dev;
+
+	if (!chip)
+		return -EBUSY;
+	if (len < TPM_HEADER_SIZE)
+		return -EBUSY;
+
+	tpm_dev = (struct st33zp24_dev *)TPM_VPRIV(chip);
+
+	ret = request_locality(chip);
+	if (ret < 0)
+		return ret;
+
+	status = st33zp24_status(chip);
+	if ((status & TPM_STS_COMMAND_READY) == 0) {
+		st33zp24_cancel(chip);
+		if (wait_for_stat
+		    (chip, TPM_STS_COMMAND_READY, chip->vendor.timeout_b,
+		     &chip->vendor.read_queue, false) < 0) {
+			ret = -ETIME;
+			goto out_err;
+		}
+	}
+
+	for (i = 0; i < len - 1;) {
+		burstcnt = get_burstcount(chip);
+		if (burstcnt < 0)
+			return burstcnt;
+		size = min_t(int, len - i - 1, burstcnt);
+		ret = tpm_dev->ops->send(tpm_dev->phy_id, TPM_DATA_FIFO,
+					 buf + i, size);
+		if (ret < 0)
+			goto out_err;
+
+		i += size;
+	}
+
+	status = st33zp24_status(chip);
+	if ((status & TPM_STS_DATA_EXPECT) == 0) {
+		ret = -EIO;
+		goto out_err;
+	}
+
+	ret = tpm_dev->ops->send(tpm_dev->phy_id, TPM_DATA_FIFO,
+				 buf + len - 1, 1);
+	if (ret < 0)
+		goto out_err;
+
+	status = st33zp24_status(chip);
+	if ((status & TPM_STS_DATA_EXPECT) != 0) {
+		ret = -EIO;
+		goto out_err;
+	}
+
+	data = TPM_STS_GO;
+	ret = tpm_dev->ops->send(tpm_dev->phy_id, TPM_STS, &data, 1);
+	if (ret < 0)
+		goto out_err;
+
+	return len;
+out_err:
+	st33zp24_cancel(chip);
+	release_locality(chip);
+	return ret;
+}
+
+/*
+ * st33zp24_recv received TPM response through TPM phy.
+ * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h.
+ * @param: buf,	the buffer to store datas.
+ * @param: count, the number of bytes to send.
+ * @return: In case of success the number of bytes received.
+ *	    In other case, a < 0 value describing the issue.
+ */
+static int st33zp24_recv(struct tpm_chip *chip, unsigned char *buf,
+			    size_t count)
+{
+	int size = 0;
+	int expected;
+
+	if (!chip)
+		return -EBUSY;
+
+	if (count < TPM_HEADER_SIZE) {
+		size = -EIO;
+		goto out;
+	}
+
+	size = recv_data(chip, buf, TPM_HEADER_SIZE);
+	if (size < TPM_HEADER_SIZE) {
+		dev_err(&chip->dev, "Unable to read header\n");
+		goto out;
+	}
+
+	expected = be32_to_cpu(*(__be32 *)(buf + 2));
+	if (expected > count) {
+		size = -EIO;
+		goto out;
+	}
+
+	size += recv_data(chip, &buf[TPM_HEADER_SIZE],
+			expected - TPM_HEADER_SIZE);
+	if (size < expected) {
+		dev_err(&chip->dev, "Unable to read remainder of result\n");
+		size = -ETIME;
+	}
+
+out:
+	st33zp24_cancel(chip);
+	release_locality(chip);
+	return size;
+}
+
+/*
+ * st33zp24_req_canceled
+ * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h.
+ * @param: status, the TPM status.
+ * @return: Does TPM ready to compute a new command ? true.
+ */
+static bool st33zp24_req_canceled(struct tpm_chip *chip, u8 status)
+{
+	return (status == TPM_STS_COMMAND_READY);
+}
+
+static const struct tpm_class_ops st33zp24_tpm = {
+	.send = st33zp24_send,
+	.recv = st33zp24_recv,
+	.cancel = st33zp24_cancel,
+	.status = st33zp24_status,
+	.req_complete_mask = TPM_STS_DATA_AVAIL | TPM_STS_VALID,
+	.req_complete_val = TPM_STS_DATA_AVAIL | TPM_STS_VALID,
+	.req_canceled = st33zp24_req_canceled,
+};
+
+/*
+ * st33zp24_probe initialize the TPM device
+ * @param: client, the i2c_client drescription (TPM I2C description).
+ * @param: id, the i2c_device_id struct.
+ * @return: 0 in case of success.
+ *	 -1 in other case.
+ */
+int st33zp24_probe(void *phy_id, const struct st33zp24_phy_ops *ops,
+		   struct device *dev, int irq, int io_lpcpd)
+{
+	int ret;
+	u8 intmask = 0;
+	struct tpm_chip *chip;
+	struct st33zp24_dev *tpm_dev;
+
+	chip = tpmm_chip_alloc(dev, &st33zp24_tpm);
+	if (IS_ERR(chip))
+		return PTR_ERR(chip);
+
+	tpm_dev = devm_kzalloc(dev, sizeof(struct st33zp24_dev),
+			       GFP_KERNEL);
+	if (!tpm_dev)
+		return -ENOMEM;
+
+	TPM_VPRIV(chip) = tpm_dev;
+	tpm_dev->phy_id = phy_id;
+	tpm_dev->ops = ops;
+
+	chip->vendor.timeout_a = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
+	chip->vendor.timeout_b = msecs_to_jiffies(TIS_LONG_TIMEOUT);
+	chip->vendor.timeout_c = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
+	chip->vendor.timeout_d = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
+
+	chip->vendor.locality = LOCALITY0;
+
+	if (irq) {
+		/* INTERRUPT Setup */
+		init_waitqueue_head(&chip->vendor.read_queue);
+		tpm_dev->intrs = 0;
+
+		if (request_locality(chip) != LOCALITY0) {
+			ret = -ENODEV;
+			goto _tpm_clean_answer;
+		}
+
+		clear_interruption(tpm_dev);
+		ret = devm_request_irq(dev, irq, tpm_ioserirq_handler,
+				IRQF_TRIGGER_HIGH, "TPM SERIRQ management",
+				chip);
+		if (ret < 0) {
+			dev_err(&chip->dev, "TPM SERIRQ signals %d not available\n",
+				irq);
+			goto _tpm_clean_answer;
+		}
+
+		intmask |= TPM_INTF_CMD_READY_INT
+			|  TPM_INTF_STS_VALID_INT
+			|  TPM_INTF_DATA_AVAIL_INT;
+
+		ret = tpm_dev->ops->send(tpm_dev->phy_id, TPM_INT_ENABLE,
+					 &intmask, 1);
+		if (ret < 0)
+			goto _tpm_clean_answer;
+
+		intmask = TPM_GLOBAL_INT_ENABLE;
+		ret = tpm_dev->ops->send(tpm_dev->phy_id, (TPM_INT_ENABLE + 3),
+					 &intmask, 1);
+		if (ret < 0)
+			goto _tpm_clean_answer;
+
+		chip->vendor.irq = irq;
+
+		disable_irq_nosync(chip->vendor.irq);
+
+		tpm_gen_interrupt(chip);
+	}
+
+	tpm_get_timeouts(chip);
+	tpm_do_selftest(chip);
+
+	return tpm_chip_register(chip);
+_tpm_clean_answer:
+	dev_info(&chip->dev, "TPM initialization fail\n");
+	return ret;
+}
+EXPORT_SYMBOL(st33zp24_probe);
+
+/*
+ * st33zp24_remove remove the TPM device
+ * @param: tpm_data, the tpm phy.
+ * @return: 0 in case of success.
+ */
+int st33zp24_remove(struct tpm_chip *chip)
+{
+	tpm_chip_unregister(chip);
+	return 0;
+}
+EXPORT_SYMBOL(st33zp24_remove);
+
+#ifdef CONFIG_PM_SLEEP
+/*
+ * st33zp24_pm_suspend suspend the TPM device
+ * @param: tpm_data, the tpm phy.
+ * @param: mesg, the power management message.
+ * @return: 0 in case of success.
+ */
+int st33zp24_pm_suspend(struct device *dev)
+{
+	struct tpm_chip *chip = dev_get_drvdata(dev);
+	struct st33zp24_dev *tpm_dev;
+	int ret = 0;
+
+	tpm_dev = (struct st33zp24_dev *)TPM_VPRIV(chip);
+
+	if (gpio_is_valid(tpm_dev->io_lpcpd))
+		gpio_set_value(tpm_dev->io_lpcpd, 0);
+	else
+		ret = tpm_pm_suspend(dev);
+
+	return ret;
+} /* st33zp24_pm_suspend() */
+EXPORT_SYMBOL(st33zp24_pm_suspend);
+
+/*
+ * st33zp24_pm_resume resume the TPM device
+ * @param: tpm_data, the tpm phy.
+ * @return: 0 in case of success.
+ */
+int st33zp24_pm_resume(struct device *dev)
+{
+	struct tpm_chip *chip = dev_get_drvdata(dev);
+	struct st33zp24_dev *tpm_dev;
+	int ret = 0;
+
+	tpm_dev = (struct st33zp24_dev *)TPM_VPRIV(chip);
+
+	if (gpio_is_valid(tpm_dev->io_lpcpd)) {
+		gpio_set_value(tpm_dev->io_lpcpd, 1);
+		ret = wait_for_stat(chip,
+				TPM_STS_VALID, chip->vendor.timeout_b,
+				&chip->vendor.read_queue, false);
+	} else {
+		ret = tpm_pm_resume(dev);
+		if (!ret)
+			tpm_do_selftest(chip);
+	}
+	return ret;
+} /* st33zp24_pm_resume() */
+EXPORT_SYMBOL(st33zp24_pm_resume);
+#endif
+
+MODULE_AUTHOR("TPM support (TPMsupport-nkJGhpqTU55BDgjK7y7TUQ@public.gmane.org)");
+MODULE_DESCRIPTION("ST33ZP24 TPM 1.2 driver");
+MODULE_VERSION("1.3.0");
+MODULE_LICENSE("GPL");
diff --git a/drivers/char/tpm/st33zp24/st33zp24.h b/drivers/char/tpm/st33zp24/st33zp24.h
new file mode 100644
index 0000000..43ad39a
--- /dev/null
+++ b/drivers/char/tpm/st33zp24/st33zp24.h
@@ -0,0 +1,34 @@
+/*
+ * STMicroelectronics TPM Linux driver for TPM ST33ZP24
+ * Copyright (C) 2009 - 2015  STMicroelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __LOCAL_ST33ZP24_H__
+#define __LOCAL_ST33ZP24_H__
+
+struct st33zp24_phy_ops {
+	int (*send)(void *phy_id, u8 tpm_register, u8 *tpm_data, int tpm_size);
+	int (*recv)(void *phy_id, u8 tpm_register, u8 *tpm_data, int tpm_size);
+};
+
+#ifdef CONFIG_PM_SLEEP
+int st33zp24_pm_suspend(struct device *dev);
+int st33zp24_pm_resume(struct device *dev);
+#endif
+
+int st33zp24_probe(void *phy_id, const struct st33zp24_phy_ops *ops,
+		   struct device *dev, int irq, int io_lpcpd);
+int st33zp24_remove(struct tpm_chip *chip);
+#endif /* __LOCAL_ST33ZP24_H__ */
diff --git a/drivers/char/tpm/tpm_i2c_stm_st33.c b/drivers/char/tpm/tpm_i2c_stm_st33.c
deleted file mode 100644
index 882c60a..0000000
--- a/drivers/char/tpm/tpm_i2c_stm_st33.c
+++ /dev/null
@@ -1,915 +0,0 @@
-/*
- * STMicroelectronics TPM I2C Linux driver for TPM ST33ZP24
- * Copyright (C) 2009, 2010, 2014  STMicroelectronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see <http://www.gnu.org/licenses/>.
- *
- * STMicroelectronics version 1.2.1, Copyright (C) 2014
- * STMicroelectronics comes with ABSOLUTELY NO WARRANTY.
- * This is free software, and you are welcome to redistribute it
- * under certain conditions.
- *
- * @Author: Christophe RICARD tpmsupport-qxv4g6HH51o@public.gmane.org
- *
- * @File: tpm_stm_st33_i2c.c
- *
- * @Synopsis:
- *	09/15/2010:	First shot driver tpm_tis driver for
- *			 lpc is used as model.
- */
-
-#include <linux/pci.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/fs.h>
-#include <linux/miscdevice.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/wait.h>
-#include <linux/freezer.h>
-#include <linux/string.h>
-#include <linux/interrupt.h>
-#include <linux/sysfs.h>
-#include <linux/gpio.h>
-#include <linux/sched.h>
-#include <linux/uaccess.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/of_irq.h>
-#include <linux/of_gpio.h>
-
-#include <linux/platform_data/tpm_stm_st33.h>
-#include "tpm.h"
-
-#define TPM_ACCESS			0x0
-#define TPM_STS				0x18
-#define TPM_HASH_END			0x20
-#define TPM_DATA_FIFO			0x24
-#define TPM_HASH_DATA			0x24
-#define TPM_HASH_START			0x28
-#define TPM_INTF_CAPABILITY		0x14
-#define TPM_INT_STATUS			0x10
-#define TPM_INT_ENABLE			0x08
-
-#define TPM_DUMMY_BYTE			0xAA
-#define TPM_WRITE_DIRECTION		0x80
-#define TPM_HEADER_SIZE			10
-#define TPM_BUFSIZE			2048
-
-#define LOCALITY0		0
-
-
-enum stm33zp24_access {
-	TPM_ACCESS_VALID = 0x80,
-	TPM_ACCESS_ACTIVE_LOCALITY = 0x20,
-	TPM_ACCESS_REQUEST_PENDING = 0x04,
-	TPM_ACCESS_REQUEST_USE = 0x02,
-};
-
-enum stm33zp24_status {
-	TPM_STS_VALID = 0x80,
-	TPM_STS_COMMAND_READY = 0x40,
-	TPM_STS_GO = 0x20,
-	TPM_STS_DATA_AVAIL = 0x10,
-	TPM_STS_DATA_EXPECT = 0x08,
-};
-
-enum stm33zp24_int_flags {
-	TPM_GLOBAL_INT_ENABLE = 0x80,
-	TPM_INTF_CMD_READY_INT = 0x080,
-	TPM_INTF_FIFO_AVALAIBLE_INT = 0x040,
-	TPM_INTF_WAKE_UP_READY_INT = 0x020,
-	TPM_INTF_LOCALITY_CHANGE_INT = 0x004,
-	TPM_INTF_STS_VALID_INT = 0x002,
-	TPM_INTF_DATA_AVAIL_INT = 0x001,
-};
-
-enum tis_defaults {
-	TIS_SHORT_TIMEOUT = 750,
-	TIS_LONG_TIMEOUT = 2000,
-};
-
-struct tpm_stm_dev {
-	struct i2c_client *client;
-	struct tpm_chip *chip;
-	u8 buf[TPM_BUFSIZE + 1];
-	u32 intrs;
-	int io_lpcpd;
-};
-
-/*
- * write8_reg
- * Send byte to the TIS register according to the ST33ZP24 I2C protocol.
- * @param: tpm_register, the tpm tis register where the data should be written
- * @param: tpm_data, the tpm_data to write inside the tpm_register
- * @param: tpm_size, The length of the data
- * @return: Returns negative errno, or else the number of bytes written.
- */
-static int write8_reg(struct tpm_stm_dev *tpm_dev, u8 tpm_register,
-		      u8 *tpm_data, u16 tpm_size)
-{
-	tpm_dev->buf[0] = tpm_register;
-	memcpy(tpm_dev->buf + 1, tpm_data, tpm_size);
-	return i2c_master_send(tpm_dev->client, tpm_dev->buf, tpm_size + 1);
-} /* write8_reg() */
-
-/*
- * read8_reg
- * Recv byte from the TIS register according to the ST33ZP24 I2C protocol.
- * @param: tpm_register, the tpm tis register where the data should be read
- * @param: tpm_data, the TPM response
- * @param: tpm_size, tpm TPM response size to read.
- * @return: number of byte read successfully: should be one if success.
- */
-static int read8_reg(struct tpm_stm_dev *tpm_dev, u8 tpm_register,
-		    u8 *tpm_data, int tpm_size)
-{
-	u8 status = 0;
-	u8 data;
-
-	data = TPM_DUMMY_BYTE;
-	status = write8_reg(tpm_dev, tpm_register, &data, 1);
-	if (status == 2)
-		status = i2c_master_recv(tpm_dev->client, tpm_data, tpm_size);
-	return status;
-} /* read8_reg() */
-
-/*
- * I2C_WRITE_DATA
- * Send byte to the TIS register according to the ST33ZP24 I2C protocol.
- * @param: tpm_dev, the chip description
- * @param: tpm_register, the tpm tis register where the data should be written
- * @param: tpm_data, the tpm_data to write inside the tpm_register
- * @param: tpm_size, The length of the data
- * @return: number of byte written successfully: should be one if success.
- */
-#define I2C_WRITE_DATA(tpm_dev, tpm_register, tpm_data, tpm_size) \
-	(write8_reg(tpm_dev, tpm_register | \
-	TPM_WRITE_DIRECTION, tpm_data, tpm_size))
-
-/*
- * I2C_READ_DATA
- * Recv byte from the TIS register according to the ST33ZP24 I2C protocol.
- * @param: tpm_dev, the chip description
- * @param: tpm_register, the tpm tis register where the data should be read
- * @param: tpm_data, the TPM response
- * @param: tpm_size, tpm TPM response size to read.
- * @return: number of byte read successfully: should be one if success.
- */
-#define I2C_READ_DATA(tpm_dev, tpm_register, tpm_data, tpm_size) \
-	(read8_reg(tpm_dev, tpm_register, tpm_data, tpm_size))
-
-/*
- * clear_interruption
- * clear the TPM interrupt register.
- * @param: tpm, the chip description
- * @return: the TPM_INT_STATUS value
- */
-static u8 clear_interruption(struct tpm_stm_dev *tpm_dev)
-{
-	u8 interrupt;
-
-	I2C_READ_DATA(tpm_dev, TPM_INT_STATUS, &interrupt, 1);
-	I2C_WRITE_DATA(tpm_dev, TPM_INT_STATUS, &interrupt, 1);
-	return interrupt;
-} /* clear_interruption() */
-
-/*
- * tpm_stm_i2c_cancel, cancel is not implemented.
- * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h
- */
-static void tpm_stm_i2c_cancel(struct tpm_chip *chip)
-{
-	struct tpm_stm_dev *tpm_dev;
-	u8 data;
-
-	tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip);
-
-	data = TPM_STS_COMMAND_READY;
-	I2C_WRITE_DATA(tpm_dev, TPM_STS, &data, 1);
-} /* tpm_stm_i2c_cancel() */
-
-/*
- * tpm_stm_spi_status return the TPM_STS register
- * @param: chip, the tpm chip description
- * @return: the TPM_STS register value.
- */
-static u8 tpm_stm_i2c_status(struct tpm_chip *chip)
-{
-	struct tpm_stm_dev *tpm_dev;
-	u8 data;
-
-	tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip);
-
-	I2C_READ_DATA(tpm_dev, TPM_STS, &data, 1);
-	return data;
-} /* tpm_stm_i2c_status() */
-
-
-/*
- * check_locality if the locality is active
- * @param: chip, the tpm chip description
- * @return: the active locality or -EACCESS.
- */
-static int check_locality(struct tpm_chip *chip)
-{
-	struct tpm_stm_dev *tpm_dev;
-	u8 data;
-	u8 status;
-
-	tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip);
-
-	status = I2C_READ_DATA(tpm_dev, TPM_ACCESS, &data, 1);
-	if (status && (data &
-		(TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) ==
-		(TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID))
-		return chip->vendor.locality;
-
-	return -EACCES;
-} /* check_locality() */
-
-/*
- * request_locality request the TPM locality
- * @param: chip, the chip description
- * @return: the active locality or EACCESS.
- */
-static int request_locality(struct tpm_chip *chip)
-{
-	unsigned long stop;
-	long ret;
-	struct tpm_stm_dev *tpm_dev;
-	u8 data;
-
-	if (check_locality(chip) == chip->vendor.locality)
-		return chip->vendor.locality;
-
-	tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip);
-
-	data = TPM_ACCESS_REQUEST_USE;
-	ret = I2C_WRITE_DATA(tpm_dev, TPM_ACCESS, &data, 1);
-	if (ret < 0)
-		goto end;
-
-	stop = jiffies + chip->vendor.timeout_a;
-
-	/* Request locality is usually effective after the request */
-	do {
-		if (check_locality(chip) >= 0)
-			return chip->vendor.locality;
-		msleep(TPM_TIMEOUT);
-	} while (time_before(jiffies, stop));
-	ret = -EACCES;
-end:
-	return ret;
-} /* request_locality() */
-
-/*
- * release_locality release the active locality
- * @param: chip, the tpm chip description.
- */
-static void release_locality(struct tpm_chip *chip)
-{
-	struct tpm_stm_dev *tpm_dev;
-	u8 data;
-
-	tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip);
-	data = TPM_ACCESS_ACTIVE_LOCALITY;
-
-	I2C_WRITE_DATA(tpm_dev, TPM_ACCESS, &data, 1);
-}
-
-/*
- * get_burstcount return the burstcount address 0x19 0x1A
- * @param: chip, the chip description
- * return: the burstcount.
- */
-static int get_burstcount(struct tpm_chip *chip)
-{
-	unsigned long stop;
-	int burstcnt, status;
-	u8 tpm_reg, temp;
-	struct tpm_stm_dev *tpm_dev;
-
-	tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip);
-
-	stop = jiffies + chip->vendor.timeout_d;
-	do {
-		tpm_reg = TPM_STS + 1;
-		status = I2C_READ_DATA(tpm_dev, tpm_reg, &temp, 1);
-		if (status < 0)
-			goto end;
-
-		tpm_reg = tpm_reg + 1;
-		burstcnt = temp;
-		status = I2C_READ_DATA(tpm_dev, tpm_reg, &temp, 1);
-		if (status < 0)
-			goto end;
-
-		burstcnt |= temp << 8;
-		if (burstcnt)
-			return burstcnt;
-		msleep(TPM_TIMEOUT);
-	} while (time_before(jiffies, stop));
-
-end:
-	return -EBUSY;
-} /* get_burstcount() */
-
-static bool wait_for_tpm_stat_cond(struct tpm_chip *chip, u8 mask,
-				bool check_cancel, bool *canceled)
-{
-	u8 status = chip->ops->status(chip);
-
-	*canceled = false;
-	if ((status & mask) == mask)
-		return true;
-	if (check_cancel && chip->ops->req_canceled(chip, status)) {
-		*canceled = true;
-		return true;
-	}
-	return false;
-}
-
-/*
- * interrupt_to_status
- * @param: irq_mask, the irq mask value to wait
- * @return: the corresponding tpm_sts value
- */
-static u8 interrupt_to_status(u8 irq_mask)
-{
-	u8 status = 0;
-
-	if ((irq_mask & TPM_INTF_STS_VALID_INT) == TPM_INTF_STS_VALID_INT)
-		status |= TPM_STS_VALID;
-	if ((irq_mask & TPM_INTF_DATA_AVAIL_INT) == TPM_INTF_DATA_AVAIL_INT)
-		status |= TPM_STS_DATA_AVAIL;
-	if ((irq_mask & TPM_INTF_CMD_READY_INT) == TPM_INTF_CMD_READY_INT)
-		status |= TPM_STS_COMMAND_READY;
-
-	return status;
-} /* status_to_interrupt() */
-
-/*
- * wait_for_stat wait for a TPM_STS value
- * @param: chip, the tpm chip description
- * @param: mask, the value mask to wait
- * @param: timeout, the timeout
- * @param: queue, the wait queue.
- * @param: check_cancel, does the command can be cancelled ?
- * @return: the tpm status, 0 if success, -ETIME if timeout is reached.
- */
-static int wait_for_stat(struct tpm_chip *chip, u8 mask, unsigned long timeout,
-			wait_queue_head_t *queue, bool check_cancel)
-{
-	unsigned long stop;
-	int ret;
-	bool canceled = false;
-	bool condition;
-	u32 cur_intrs;
-	u8 interrupt, status;
-	struct tpm_stm_dev *tpm_dev;
-
-	tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip);
-
-	/* check current status */
-	status = tpm_stm_i2c_status(chip);
-	if ((status & mask) == mask)
-		return 0;
-
-	stop = jiffies + timeout;
-
-	if (chip->vendor.irq) {
-		cur_intrs = tpm_dev->intrs;
-		interrupt = clear_interruption(tpm_dev);
-		enable_irq(chip->vendor.irq);
-
-again:
-		timeout = stop - jiffies;
-		if ((long) timeout <= 0)
-			return -1;
-
-		ret = wait_event_interruptible_timeout(*queue,
-					cur_intrs != tpm_dev->intrs, timeout);
-
-		interrupt |= clear_interruption(tpm_dev);
-		status = interrupt_to_status(interrupt);
-		condition = wait_for_tpm_stat_cond(chip, mask,
-						   check_cancel, &canceled);
-
-		if (ret >= 0 && condition) {
-			if (canceled)
-				return -ECANCELED;
-			return 0;
-		}
-		if (ret == -ERESTARTSYS && freezing(current)) {
-			clear_thread_flag(TIF_SIGPENDING);
-			goto again;
-		}
-		disable_irq_nosync(chip->vendor.irq);
-
-	} else {
-		do {
-			msleep(TPM_TIMEOUT);
-			status = chip->ops->status(chip);
-			if ((status & mask) == mask)
-				return 0;
-		} while (time_before(jiffies, stop));
-	}
-
-	return -ETIME;
-} /* wait_for_stat() */
-
-/*
- * recv_data receive data
- * @param: chip, the tpm chip description
- * @param: buf, the buffer where the data are received
- * @param: count, the number of data to receive
- * @return: the number of bytes read from TPM FIFO.
- */
-static int recv_data(struct tpm_chip *chip, u8 *buf, size_t count)
-{
-	int size = 0, burstcnt, len, ret;
-	struct tpm_stm_dev *tpm_dev;
-
-	tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip);
-
-	while (size < count &&
-	       wait_for_stat(chip,
-			     TPM_STS_DATA_AVAIL | TPM_STS_VALID,
-			     chip->vendor.timeout_c,
-			     &chip->vendor.read_queue, true) == 0) {
-		burstcnt = get_burstcount(chip);
-		if (burstcnt < 0)
-			return burstcnt;
-		len = min_t(int, burstcnt, count - size);
-		ret = I2C_READ_DATA(tpm_dev, TPM_DATA_FIFO, buf + size, len);
-		if (ret < 0)
-			return ret;
-
-		size += len;
-	}
-	return size;
-}
-
-/*
- * tpm_ioserirq_handler the serirq irq handler
- * @param: irq, the tpm chip description
- * @param: dev_id, the description of the chip
- * @return: the status of the handler.
- */
-static irqreturn_t tpm_ioserirq_handler(int irq, void *dev_id)
-{
-	struct tpm_chip *chip = dev_id;
-	struct tpm_stm_dev *tpm_dev;
-
-	tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip);
-
-	tpm_dev->intrs++;
-	wake_up_interruptible(&chip->vendor.read_queue);
-	disable_irq_nosync(chip->vendor.irq);
-
-	return IRQ_HANDLED;
-} /* tpm_ioserirq_handler() */
-
-
-/*
- * tpm_stm_i2c_send send TPM commands through the I2C bus.
- *
- * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h
- * @param: buf,	the buffer to send.
- * @param: count, the number of bytes to send.
- * @return: In case of success the number of bytes sent.
- *			In other case, a < 0 value describing the issue.
- */
-static int tpm_stm_i2c_send(struct tpm_chip *chip, unsigned char *buf,
-			    size_t len)
-{
-	u32 status, i, size;
-	int burstcnt = 0;
-	int ret;
-	u8 data;
-	struct i2c_client *client;
-	struct tpm_stm_dev *tpm_dev;
-
-	if (!chip)
-		return -EBUSY;
-	if (len < TPM_HEADER_SIZE)
-		return -EBUSY;
-
-	tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip);
-	client = tpm_dev->client;
-
-	client->flags = 0;
-
-	ret = request_locality(chip);
-	if (ret < 0)
-		return ret;
-
-	status = tpm_stm_i2c_status(chip);
-	if ((status & TPM_STS_COMMAND_READY) == 0) {
-		tpm_stm_i2c_cancel(chip);
-		if (wait_for_stat
-		    (chip, TPM_STS_COMMAND_READY, chip->vendor.timeout_b,
-		     &chip->vendor.read_queue, false) < 0) {
-			ret = -ETIME;
-			goto out_err;
-		}
-	}
-
-	for (i = 0; i < len - 1;) {
-		burstcnt = get_burstcount(chip);
-		if (burstcnt < 0)
-			return burstcnt;
-		size = min_t(int, len - i - 1, burstcnt);
-		ret = I2C_WRITE_DATA(tpm_dev, TPM_DATA_FIFO, buf + i, size);
-		if (ret < 0)
-			goto out_err;
-
-		i += size;
-	}
-
-	status = tpm_stm_i2c_status(chip);
-	if ((status & TPM_STS_DATA_EXPECT) == 0) {
-		ret = -EIO;
-		goto out_err;
-	}
-
-	ret = I2C_WRITE_DATA(tpm_dev, TPM_DATA_FIFO, buf + len - 1, 1);
-	if (ret < 0)
-		goto out_err;
-
-	status = tpm_stm_i2c_status(chip);
-	if ((status & TPM_STS_DATA_EXPECT) != 0) {
-		ret = -EIO;
-		goto out_err;
-	}
-
-	data = TPM_STS_GO;
-	I2C_WRITE_DATA(tpm_dev, TPM_STS, &data, 1);
-
-	return len;
-out_err:
-	tpm_stm_i2c_cancel(chip);
-	release_locality(chip);
-	return ret;
-}
-
-/*
- * tpm_stm_i2c_recv received TPM response through the I2C bus.
- * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h.
- * @param: buf,	the buffer to store datas.
- * @param: count, the number of bytes to send.
- * @return: In case of success the number of bytes received.
- *	    In other case, a < 0 value describing the issue.
- */
-static int tpm_stm_i2c_recv(struct tpm_chip *chip, unsigned char *buf,
-			    size_t count)
-{
-	int size = 0;
-	int expected;
-
-	if (!chip)
-		return -EBUSY;
-
-	if (count < TPM_HEADER_SIZE) {
-		size = -EIO;
-		goto out;
-	}
-
-	size = recv_data(chip, buf, TPM_HEADER_SIZE);
-	if (size < TPM_HEADER_SIZE) {
-		dev_err(chip->pdev, "Unable to read header\n");
-		goto out;
-	}
-
-	expected = be32_to_cpu(*(__be32 *)(buf + 2));
-	if (expected > count) {
-		size = -EIO;
-		goto out;
-	}
-
-	size += recv_data(chip, &buf[TPM_HEADER_SIZE],
-			expected - TPM_HEADER_SIZE);
-	if (size < expected) {
-		dev_err(chip->pdev, "Unable to read remainder of result\n");
-		size = -ETIME;
-		goto out;
-	}
-
-out:
-	chip->ops->cancel(chip);
-	release_locality(chip);
-	return size;
-}
-
-static bool tpm_stm_i2c_req_canceled(struct tpm_chip *chip, u8 status)
-{
-	return (status == TPM_STS_COMMAND_READY);
-}
-
-static const struct tpm_class_ops st_i2c_tpm = {
-	.send = tpm_stm_i2c_send,
-	.recv = tpm_stm_i2c_recv,
-	.cancel = tpm_stm_i2c_cancel,
-	.status = tpm_stm_i2c_status,
-	.req_complete_mask = TPM_STS_DATA_AVAIL | TPM_STS_VALID,
-	.req_complete_val = TPM_STS_DATA_AVAIL | TPM_STS_VALID,
-	.req_canceled = tpm_stm_i2c_req_canceled,
-};
-
-#ifdef CONFIG_OF
-static int tpm_stm_i2c_of_request_resources(struct tpm_chip *chip)
-{
-	struct device_node *pp;
-	struct tpm_stm_dev *tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip);
-	struct i2c_client *client = tpm_dev->client;
-	int gpio;
-	int ret;
-
-	pp = client->dev.of_node;
-	if (!pp) {
-		dev_err(chip->pdev, "No platform data\n");
-		return -ENODEV;
-	}
-
-	/* Get GPIO from device tree */
-	gpio = of_get_named_gpio(pp, "lpcpd-gpios", 0);
-	if (gpio < 0) {
-		dev_err(chip->pdev, "Failed to retrieve lpcpd-gpios from dts.\n");
-		tpm_dev->io_lpcpd = -1;
-		/*
-		 * lpcpd pin is not specified. This is not an issue as
-		 * power management can be also managed by TPM specific
-		 * commands. So leave with a success status code.
-		 */
-		return 0;
-	}
-	/* GPIO request and configuration */
-	ret = devm_gpio_request_one(&client->dev, gpio,
-			GPIOF_OUT_INIT_HIGH, "TPM IO LPCPD");
-	if (ret) {
-		dev_err(chip->pdev, "Failed to request lpcpd pin\n");
-		return -ENODEV;
-	}
-	tpm_dev->io_lpcpd = gpio;
-
-	return 0;
-}
-#else
-static int tpm_stm_i2c_of_request_resources(struct tpm_chip *chip)
-{
-	return -ENODEV;
-}
-#endif
-
-static int tpm_stm_i2c_request_resources(struct i2c_client *client,
-					 struct tpm_chip *chip)
-{
-	struct st33zp24_platform_data *pdata;
-	struct tpm_stm_dev *tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip);
-	int ret;
-
-	pdata = client->dev.platform_data;
-	if (!pdata) {
-		dev_err(chip->pdev, "No platform data\n");
-		return -ENODEV;
-	}
-
-	/* store for late use */
-	tpm_dev->io_lpcpd = pdata->io_lpcpd;
-
-	if (gpio_is_valid(pdata->io_lpcpd)) {
-		ret = devm_gpio_request_one(&client->dev,
-				pdata->io_lpcpd, GPIOF_OUT_INIT_HIGH,
-				"TPM IO_LPCPD");
-		if (ret) {
-			dev_err(chip->pdev, "%s : reset gpio_request failed\n",
-				__FILE__);
-			return ret;
-		}
-	}
-
-	return 0;
-}
-
-/*
- * tpm_stm_i2c_probe initialize the TPM device
- * @param: client, the i2c_client drescription (TPM I2C description).
- * @param: id, the i2c_device_id struct.
- * @return: 0 in case of success.
- *	 -1 in other case.
- */
-static int
-tpm_stm_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id)
-{
-	int ret;
-	u8 intmask = 0;
-	struct tpm_chip *chip;
-	struct st33zp24_platform_data *platform_data;
-	struct tpm_stm_dev *tpm_dev;
-
-	if (!client) {
-		pr_info("%s: i2c client is NULL. Device not accessible.\n",
-			__func__);
-		return -ENODEV;
-	}
-
-	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
-		dev_info(&client->dev, "client not i2c capable\n");
-		return -ENODEV;
-	}
-
-	tpm_dev = devm_kzalloc(&client->dev, sizeof(struct tpm_stm_dev),
-			       GFP_KERNEL);
-	if (!tpm_dev)
-		return -ENOMEM;
-
-	chip = tpmm_chip_alloc(&client->dev, &st_i2c_tpm);
-	if (IS_ERR(chip))
-		return PTR_ERR(chip);
-
-	TPM_VPRIV(chip) = tpm_dev;
-	tpm_dev->client = client;
-
-	platform_data = client->dev.platform_data;
-	if (!platform_data && client->dev.of_node) {
-		ret = tpm_stm_i2c_of_request_resources(chip);
-		if (ret)
-			goto _tpm_clean_answer;
-	} else if (platform_data) {
-		ret = tpm_stm_i2c_request_resources(client, chip);
-		if (ret)
-			goto _tpm_clean_answer;
-	}
-
-	chip->vendor.timeout_a = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
-	chip->vendor.timeout_b = msecs_to_jiffies(TIS_LONG_TIMEOUT);
-	chip->vendor.timeout_c = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
-	chip->vendor.timeout_d = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
-
-	chip->vendor.locality = LOCALITY0;
-
-	if (client->irq) {
-		/* INTERRUPT Setup */
-		init_waitqueue_head(&chip->vendor.read_queue);
-		tpm_dev->intrs = 0;
-
-		if (request_locality(chip) != LOCALITY0) {
-			ret = -ENODEV;
-			goto _tpm_clean_answer;
-		}
-
-		clear_interruption(tpm_dev);
-		ret = devm_request_irq(&client->dev, client->irq,
-				tpm_ioserirq_handler,
-				IRQF_TRIGGER_HIGH,
-				"TPM SERIRQ management", chip);
-		if (ret < 0) {
-			dev_err(chip->pdev, "TPM SERIRQ signals %d not available\n",
-				client->irq);
-			goto _tpm_clean_answer;
-		}
-
-		intmask |= TPM_INTF_CMD_READY_INT
-			|  TPM_INTF_STS_VALID_INT
-			|  TPM_INTF_DATA_AVAIL_INT;
-
-		ret = I2C_WRITE_DATA(tpm_dev, TPM_INT_ENABLE, &intmask, 1);
-		if (ret < 0)
-			goto _tpm_clean_answer;
-
-		intmask = TPM_GLOBAL_INT_ENABLE;
-		ret = I2C_WRITE_DATA(tpm_dev, (TPM_INT_ENABLE + 3),
-				     &intmask, 1);
-		if (ret < 0)
-			goto _tpm_clean_answer;
-
-		chip->vendor.irq = client->irq;
-
-		disable_irq_nosync(chip->vendor.irq);
-
-		tpm_gen_interrupt(chip);
-	}
-
-	tpm_get_timeouts(chip);
-	tpm_do_selftest(chip);
-
-	return tpm_chip_register(chip);
-_tpm_clean_answer:
-	dev_info(chip->pdev, "TPM I2C initialisation fail\n");
-	return ret;
-}
-
-/*
- * tpm_stm_i2c_remove remove the TPM device
- * @param: client, the i2c_client description (TPM I2C description).
- * @return: 0 in case of success.
- */
-static int tpm_stm_i2c_remove(struct i2c_client *client)
-{
-	struct tpm_chip *chip =
-		(struct tpm_chip *) i2c_get_clientdata(client);
-
-	if (chip)
-		tpm_chip_unregister(chip);
-
-	return 0;
-}
-
-#ifdef CONFIG_PM_SLEEP
-/*
- * tpm_stm_i2c_pm_suspend suspend the TPM device
- * @param: client, the i2c_client drescription (TPM I2C description).
- * @param: mesg, the power management message.
- * @return: 0 in case of success.
- */
-static int tpm_stm_i2c_pm_suspend(struct device *dev)
-{
-	struct tpm_chip *chip = dev_get_drvdata(dev);
-	struct tpm_stm_dev *tpm_dev;
-	int ret = 0;
-
-	tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip);
-
-	if (gpio_is_valid(tpm_dev->io_lpcpd))
-		gpio_set_value(tpm_dev->io_lpcpd, 0);
-	else
-		ret = tpm_pm_suspend(dev);
-
-	return ret;
-} /* tpm_stm_i2c_suspend() */
-
-/*
- * tpm_stm_i2c_pm_resume resume the TPM device
- * @param: client, the i2c_client drescription (TPM I2C description).
- * @return: 0 in case of success.
- */
-static int tpm_stm_i2c_pm_resume(struct device *dev)
-{
-	struct tpm_chip *chip = dev_get_drvdata(dev);
-	struct tpm_stm_dev *tpm_dev;
-	int ret = 0;
-
-	tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip);
-
-	if (gpio_is_valid(tpm_dev->io_lpcpd)) {
-		gpio_set_value(tpm_dev->io_lpcpd, 1);
-		ret = wait_for_stat(chip,
-				TPM_STS_VALID, chip->vendor.timeout_b,
-				&chip->vendor.read_queue, false);
-	} else {
-		ret = tpm_pm_resume(dev);
-		if (!ret)
-			tpm_do_selftest(chip);
-	}
-	return ret;
-} /* tpm_stm_i2c_pm_resume() */
-#endif
-
-static const struct i2c_device_id tpm_stm_i2c_id[] = {
-	{TPM_ST33_I2C, 0},
-	{}
-};
-MODULE_DEVICE_TABLE(i2c, tpm_stm_i2c_id);
-
-#ifdef CONFIG_OF
-static const struct of_device_id of_st33zp24_i2c_match[] = {
-	{ .compatible = "st,st33zp24-i2c", },
-	{}
-};
-MODULE_DEVICE_TABLE(of, of_st33zp24_i2c_match);
-#endif
-
-static SIMPLE_DEV_PM_OPS(tpm_stm_i2c_ops, tpm_stm_i2c_pm_suspend,
-			 tpm_stm_i2c_pm_resume);
-
-static struct i2c_driver tpm_stm_i2c_driver = {
-	.driver = {
-		.owner = THIS_MODULE,
-		.name = TPM_ST33_I2C,
-		.pm = &tpm_stm_i2c_ops,
-		.of_match_table = of_match_ptr(of_st33zp24_i2c_match),
-	},
-	.probe = tpm_stm_i2c_probe,
-	.remove = tpm_stm_i2c_remove,
-	.id_table = tpm_stm_i2c_id
-};
-
-module_i2c_driver(tpm_stm_i2c_driver);
-
-MODULE_AUTHOR("Christophe Ricard (tpmsupport-qxv4g6HH51o@public.gmane.org)");
-MODULE_DESCRIPTION("STM TPM I2C ST33 Driver");
-MODULE_VERSION("1.2.1");
-MODULE_LICENSE("GPL");
diff --git a/include/linux/platform_data/st33zp24.h b/include/linux/platform_data/st33zp24.h
new file mode 100644
index 0000000..817dfdb
--- /dev/null
+++ b/include/linux/platform_data/st33zp24.h
@@ -0,0 +1,28 @@
+/*
+ * STMicroelectronics TPM Linux driver for TPM 1.2 ST33ZP24
+ * Copyright (C) 2009 - 2015  STMicroelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ST33ZP24_H__
+#define __ST33ZP24_H__
+
+#define TPM_ST33_I2C			"st33zp24-i2c"
+#define TPM_ST33_SPI			"st33zp24-spi"
+
+struct st33zp24_platform_data {
+	int io_lpcpd;
+};
+
+#endif /* __ST33ZP24_H__ */
diff --git a/include/linux/platform_data/tpm_stm_st33.h b/include/linux/platform_data/tpm_stm_st33.h
deleted file mode 100644
index ff75310..0000000
--- a/include/linux/platform_data/tpm_stm_st33.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * STMicroelectronics TPM I2C Linux driver for TPM ST33ZP24
- * Copyright (C) 2009, 2010  STMicroelectronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see <http://www.gnu.org/licenses/>.
- *
- * STMicroelectronics version 1.2.0, Copyright (C) 2010
- * STMicroelectronics comes with ABSOLUTELY NO WARRANTY.
- * This is free software, and you are welcome to redistribute it
- * under certain conditions.
- *
- * @Author: Christophe RICARD tpmsupport-qxv4g6HH51o@public.gmane.org
- *
- * @File: stm_st33_tpm.h
- *
- * @Date: 09/15/2010
- */
-#ifndef __STM_ST33_TPM_H__
-#define __STM_ST33_TPM_H__
-
-#define TPM_ST33_I2C			"st33zp24-i2c"
-#define TPM_ST33_SPI			"st33zp24-spi"
-
-struct st33zp24_platform_data {
-	int io_lpcpd;
-};
-
-#endif /* __STM_ST33_TPM_H__ */
-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v5 2/4] tpm/tpm_i2c_stm_st33: Split tpm_i2c_tpm_st33 in 2 layers (core + phy)

[Jarkko Sakkinen]

On Tue, Jan 27, 2015 at 10:57:28PM +0100, Christophe Ricard wrote:
> tpm_i2c_stm_st33 is a TIS 1.2 TPM with a core interface which can be used
> by different phy such as i2c or spi. The core part is called st33zp24 which
> is also the main part reference.
> 
> include/linux/platform_data/tpm_stm_st33.h is renamed consequently.
> The driver is also split into an i2c phy in charge of sending/receiving
> data as well as managing platform data or dts configuration.
> 
> Reviewed-by: Jason Gunthorpe <jason.gunthorpe-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>

Acked-by: Jarkko Sakkinen<jarkko.sakknen-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>

Just checked that chip_register/unregister are done in correct places,
register after init and unregister before deinit.

> Signed-off-by: Christophe Ricard <christophe-h.ricard-qxv4g6HH51o@public.gmane.org>
> ---
>  drivers/char/tpm/Kconfig                   |  11 +-
>  drivers/char/tpm/Makefile                  |   2 +-
>  drivers/char/tpm/st33zp24/Kconfig          |  20 +
>  drivers/char/tpm/st33zp24/Makefile         |   9 +
>  drivers/char/tpm/st33zp24/i2c.c            | 278 +++++++++
>  drivers/char/tpm/st33zp24/st33zp24.c       | 688 ++++++++++++++++++++++
>  drivers/char/tpm/st33zp24/st33zp24.h       |  34 ++
>  drivers/char/tpm/tpm_i2c_stm_st33.c        | 915 -----------------------------
>  include/linux/platform_data/st33zp24.h     |  28 +
>  include/linux/platform_data/tpm_stm_st33.h |  39 --
>  10 files changed, 1059 insertions(+), 965 deletions(-)
>  create mode 100644 drivers/char/tpm/st33zp24/Kconfig
>  create mode 100644 drivers/char/tpm/st33zp24/Makefile
>  create mode 100644 drivers/char/tpm/st33zp24/i2c.c
>  create mode 100644 drivers/char/tpm/st33zp24/st33zp24.c
>  create mode 100644 drivers/char/tpm/st33zp24/st33zp24.h
>  delete mode 100644 drivers/char/tpm/tpm_i2c_stm_st33.c
>  create mode 100644 include/linux/platform_data/st33zp24.h
>  delete mode 100644 include/linux/platform_data/tpm_stm_st33.h
> 
> diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig
> index 9d4e375..2dc16d3 100644
> --- a/drivers/char/tpm/Kconfig
> +++ b/drivers/char/tpm/Kconfig
> @@ -100,16 +100,6 @@ config TCG_IBMVTPM
>  	  will be accessible from within Linux.  To compile this driver
>  	  as a module, choose M here; the module will be called tpm_ibmvtpm.
>  
> -config TCG_TIS_I2C_ST33
> -	tristate "TPM Interface Specification 1.2 Interface (I2C - STMicroelectronics)"
> -	depends on I2C
> -	depends on GPIOLIB
> -	---help---
> -	  If you have a TPM security chip from STMicroelectronics working with
> -	  an I2C bus say Yes and it will be accessible from within Linux.
> -	  To compile this driver as a module, choose M here; the module will be
> -	  called tpm_i2c_stm_st33.
> -
>  config TCG_XEN
>  	tristate "XEN TPM Interface"
>  	depends on TCG_TPM && XEN
> @@ -131,4 +121,5 @@ config TCG_CRB
>  	  from within Linux.  To compile this driver as a module, choose
>  	  M here; the module will be called tpm_crb.
>  
> +source "drivers/char/tpm/st33zp24/Kconfig"
>  endif # TCG_TPM
> diff --git a/drivers/char/tpm/Makefile b/drivers/char/tpm/Makefile
> index 990cf18..56e8f1f 100644
> --- a/drivers/char/tpm/Makefile
> +++ b/drivers/char/tpm/Makefile
> @@ -20,6 +20,6 @@ obj-$(CONFIG_TCG_NSC) += tpm_nsc.o
>  obj-$(CONFIG_TCG_ATMEL) += tpm_atmel.o
>  obj-$(CONFIG_TCG_INFINEON) += tpm_infineon.o
>  obj-$(CONFIG_TCG_IBMVTPM) += tpm_ibmvtpm.o
> -obj-$(CONFIG_TCG_TIS_I2C_ST33) += tpm_i2c_stm_st33.o
> +obj-$(CONFIG_TCG_TIS_ST33ZP24) += st33zp24/
>  obj-$(CONFIG_TCG_XEN) += xen-tpmfront.o
>  obj-$(CONFIG_TCG_CRB) += tpm_crb.o
> diff --git a/drivers/char/tpm/st33zp24/Kconfig b/drivers/char/tpm/st33zp24/Kconfig
> new file mode 100644
> index 0000000..51dcef5
> --- /dev/null
> +++ b/drivers/char/tpm/st33zp24/Kconfig
> @@ -0,0 +1,20 @@
> +config TCG_TIS_ST33ZP24
> +	tristate "STMicroelectronics TPM Interface Specification 1.2 Interface"
> +	depends on GPIOLIB
> +	---help---
> +	  STMicroelectronics ST33ZP24 core driver. It implements the core
> +	  TPM1.2 logic and hooks into the TPM kernel APIs. Physical layers will
> +	  register against it.
> +
> +	  To compile this driver as a module, choose m here. The module will be called
> +	  tpm_st33zp24.
> +
> +config TCG_TIS_ST33ZP24_I2C
> +	tristate "TPM 1.2 ST33ZP24 I2C support"
> +	depends on TCG_TIS_ST33ZP24
> +	depends on I2C
> +	---help---
> +	  This module adds support for the STMicroelectronics TPM security chip
> +	  ST33ZP24 with i2c interface.
> +	  To compile this driver as a module, choose M here; the module will be
> +	  called tpm_st33zp24_i2c.
> diff --git a/drivers/char/tpm/st33zp24/Makefile b/drivers/char/tpm/st33zp24/Makefile
> new file mode 100644
> index 0000000..414497f
> --- /dev/null
> +++ b/drivers/char/tpm/st33zp24/Makefile
> @@ -0,0 +1,9 @@
> +#
> +# Makefile for ST33ZP24 TPM 1.2 driver
> +#
> +
> +tpm_st33zp24-objs = st33zp24.o
> +obj-$(CONFIG_TCG_TIS_ST33ZP24) += tpm_st33zp24.o
> +
> +tpm_st33zp24_i2c-objs = i2c.o
> +obj-$(CONFIG_TCG_TIS_ST33ZP24_I2C) += tpm_st33zp24_i2c.o
> diff --git a/drivers/char/tpm/st33zp24/i2c.c b/drivers/char/tpm/st33zp24/i2c.c
> new file mode 100644
> index 0000000..95e3091
> --- /dev/null
> +++ b/drivers/char/tpm/st33zp24/i2c.c
> @@ -0,0 +1,278 @@
> +/*
> + * STMicroelectronics TPM I2C Linux driver for TPM ST33ZP24
> + * Copyright (C) 2009 - 2015 STMicroelectronics
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/i2c.h>
> +#include <linux/gpio.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_gpio.h>
> +#include <linux/tpm.h>
> +#include <linux/platform_data/st33zp24.h>
> +
> +#include "st33zp24.h"
> +
> +#define TPM_DUMMY_BYTE			0xAA
> +#define TPM_WRITE_DIRECTION		0x80
> +#define TPM_BUFSIZE			2048
> +
> +struct st33zp24_i2c_phy {
> +	struct i2c_client *client;
> +	u8 buf[TPM_BUFSIZE + 1];
> +	int io_lpcpd;
> +};
> +
> +/*
> + * write8_reg
> + * Send byte to the TIS register according to the ST33ZP24 I2C protocol.
> + * @param: tpm_register, the tpm tis register where the data should be written
> + * @param: tpm_data, the tpm_data to write inside the tpm_register
> + * @param: tpm_size, The length of the data
> + * @return: Returns negative errno, or else the number of bytes written.
> + */
> +static int write8_reg(void *phy_id, u8 tpm_register, u8 *tpm_data, int tpm_size)
> +{
> +	struct st33zp24_i2c_phy *phy = phy_id;
> +
> +	phy->buf[0] = tpm_register;
> +	memcpy(phy->buf + 1, tpm_data, tpm_size);
> +	return i2c_master_send(phy->client, phy->buf, tpm_size + 1);
> +} /* write8_reg() */
> +
> +/*
> + * read8_reg
> + * Recv byte from the TIS register according to the ST33ZP24 I2C protocol.
> + * @param: tpm_register, the tpm tis register where the data should be read
> + * @param: tpm_data, the TPM response
> + * @param: tpm_size, tpm TPM response size to read.
> + * @return: number of byte read successfully: should be one if success.
> + */
> +static int read8_reg(void *phy_id, u8 tpm_register, u8 *tpm_data, int tpm_size)
> +{
> +	struct st33zp24_i2c_phy *phy = phy_id;
> +	u8 status = 0;
> +	u8 data;
> +
> +	data = TPM_DUMMY_BYTE;
> +	status = write8_reg(phy, tpm_register, &data, 1);
> +	if (status == 2)
> +		status = i2c_master_recv(phy->client, tpm_data, tpm_size);
> +	return status;
> +} /* read8_reg() */
> +
> +/*
> + * st33zp24_i2c_send
> + * Send byte to the TIS register according to the ST33ZP24 I2C protocol.
> + * @param: phy_id, the phy description
> + * @param: tpm_register, the tpm tis register where the data should be written
> + * @param: tpm_data, the tpm_data to write inside the tpm_register
> + * @param: tpm_size, the length of the data
> + * @return: number of byte written successfully: should be one if success.
> + */
> +static int st33zp24_i2c_send(void *phy_id, u8 tpm_register, u8 *tpm_data,
> +			     int tpm_size)
> +{
> +	return write8_reg(phy_id, tpm_register | TPM_WRITE_DIRECTION, tpm_data,
> +			  tpm_size);
> +}
> +
> +/*
> + * st33zp24_i2c_recv
> + * Recv byte from the TIS register according to the ST33ZP24 I2C protocol.
> + * @param: phy_id, the phy description
> + * @param: tpm_register, the tpm tis register where the data should be read
> + * @param: tpm_data, the TPM response
> + * @param: tpm_size, tpm TPM response size to read.
> + * @return: number of byte read successfully: should be one if success.
> + */
> +static int st33zp24_i2c_recv(void *phy_id, u8 tpm_register, u8 *tpm_data,
> +			     int tpm_size)
> +{
> +	return read8_reg(phy_id, tpm_register, tpm_data, tpm_size);
> +}
> +
> +static const struct st33zp24_phy_ops i2c_phy_ops = {
> +	.send = st33zp24_i2c_send,
> +	.recv = st33zp24_i2c_recv,
> +};
> +
> +#ifdef CONFIG_OF
> +static int st33zp24_i2c_of_request_resources(struct st33zp24_i2c_phy *phy)
> +{
> +	struct device_node *pp;
> +	struct i2c_client *client = phy->client;
> +	int gpio;
> +	int ret;
> +
> +	pp = client->dev.of_node;
> +	if (!pp) {
> +		dev_err(&client->dev, "No platform data\n");
> +		return -ENODEV;
> +	}
> +
> +	/* Get GPIO from device tree */
> +	gpio = of_get_named_gpio(pp, "lpcpd-gpios", 0);
> +	if (gpio < 0) {
> +		dev_err(&client->dev,
> +			"Failed to retrieve lpcpd-gpios from dts.\n");
> +		phy->io_lpcpd = -1;
> +		/*
> +		 * lpcpd pin is not specified. This is not an issue as
> +		 * power management can be also managed by TPM specific
> +		 * commands. So leave with a success status code.
> +		 */
> +		return 0;
> +	}
> +	/* GPIO request and configuration */
> +	ret = devm_gpio_request_one(&client->dev, gpio,
> +			GPIOF_OUT_INIT_HIGH, "TPM IO LPCPD");
> +	if (ret) {
> +		dev_err(&client->dev, "Failed to request lpcpd pin\n");
> +		return -ENODEV;
> +	}
> +	phy->io_lpcpd = gpio;
> +
> +	return 0;
> +}
> +#else
> +static int st33zp24_i2c_of_request_resources(struct st33zp24_i2c_phy *phy)
> +{
> +	return -ENODEV;
> +}
> +#endif
> +
> +static int st33zp24_i2c_request_resources(struct i2c_client *client,
> +					  struct st33zp24_i2c_phy *phy)
> +{
> +	struct st33zp24_platform_data *pdata;
> +	int ret;
> +
> +	pdata = client->dev.platform_data;
> +	if (!pdata) {
> +		dev_err(&client->dev, "No platform data\n");
> +		return -ENODEV;
> +	}
> +
> +	/* store for late use */
> +	phy->io_lpcpd = pdata->io_lpcpd;
> +
> +	if (gpio_is_valid(pdata->io_lpcpd)) {
> +		ret = devm_gpio_request_one(&client->dev,
> +				pdata->io_lpcpd, GPIOF_OUT_INIT_HIGH,
> +				"TPM IO_LPCPD");
> +		if (ret) {
> +			dev_err(&client->dev, "Failed to request lpcpd pin\n");
> +			return ret;
> +		}
> +	}
> +
> +	return 0;
> +}
> +
> +/*
> + * st33zp24_i2c_probe initialize the TPM device
> + * @param: client, the i2c_client drescription (TPM I2C description).
> + * @param: id, the i2c_device_id struct.
> + * @return: 0 in case of success.
> + *	 -1 in other case.
> + */
> +static int st33zp24_i2c_probe(struct i2c_client *client,
> +			      const struct i2c_device_id *id)
> +{
> +	int ret;
> +	struct st33zp24_platform_data *pdata;
> +	struct st33zp24_i2c_phy *phy;
> +
> +	if (!client) {
> +		pr_info("%s: i2c client is NULL. Device not accessible.\n",
> +			__func__);
> +		return -ENODEV;
> +	}
> +
> +	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
> +		dev_info(&client->dev, "client not i2c capable\n");
> +		return -ENODEV;
> +	}
> +
> +	phy = devm_kzalloc(&client->dev, sizeof(struct st33zp24_i2c_phy),
> +			   GFP_KERNEL);
> +	if (!phy)
> +		return -ENOMEM;
> +
> +	phy->client = client;
> +	pdata = client->dev.platform_data;
> +	if (!pdata && client->dev.of_node) {
> +		ret = st33zp24_i2c_of_request_resources(phy);
> +		if (ret)
> +			return ret;
> +	} else if (pdata) {
> +		ret = st33zp24_i2c_request_resources(client, phy);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	return st33zp24_probe(phy, &i2c_phy_ops, &client->dev, client->irq,
> +			      phy->io_lpcpd);
> +}
> +
> +/*
> + * st33zp24_i2c_remove remove the TPM device
> + * @param: client, the i2c_client description (TPM I2C description).
> + * @return: 0 in case of success.
> + */
> +static int st33zp24_i2c_remove(struct i2c_client *client)
> +{
> +	struct tpm_chip *chip = i2c_get_clientdata(client);
> +
> +	return st33zp24_remove(chip);
> +}
> +
> +static const struct i2c_device_id st33zp24_i2c_id[] = {
> +	{TPM_ST33_I2C, 0},
> +	{}
> +};
> +MODULE_DEVICE_TABLE(i2c, st33zp24_i2c_id);
> +
> +#ifdef CONFIG_OF
> +static const struct of_device_id of_st33zp24_i2c_match[] = {
> +	{ .compatible = "st,st33zp24-i2c", },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(of, of_st33zp24_i2c_match);
> +#endif
> +
> +static SIMPLE_DEV_PM_OPS(st33zp24_i2c_ops, st33zp24_pm_suspend,
> +			 st33zp24_pm_resume);
> +
> +static struct i2c_driver st33zp24_i2c_driver = {
> +	.driver = {
> +		.owner = THIS_MODULE,
> +		.name = TPM_ST33_I2C,
> +		.pm = &st33zp24_i2c_ops,
> +		.of_match_table = of_match_ptr(of_st33zp24_i2c_match),
> +	},
> +	.probe = st33zp24_i2c_probe,
> +	.remove = st33zp24_i2c_remove,
> +	.id_table = st33zp24_i2c_id
> +};
> +
> +module_i2c_driver(st33zp24_i2c_driver);
> +
> +MODULE_AUTHOR("TPM support (TPMsupport-nkJGhpqTU55BDgjK7y7TUQ@public.gmane.org)");
> +MODULE_DESCRIPTION("STM TPM 1.2 I2C ST33 Driver");
> +MODULE_VERSION("1.3.0");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/char/tpm/st33zp24/st33zp24.c b/drivers/char/tpm/st33zp24/st33zp24.c
> new file mode 100644
> index 0000000..0aceb0e
> --- /dev/null
> +++ b/drivers/char/tpm/st33zp24/st33zp24.c
> @@ -0,0 +1,688 @@
> +/*
> + * STMicroelectronics TPM Linux driver for TPM ST33ZP24
> + * Copyright (C) 2009 - 2015 STMicroelectronics
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/fs.h>
> +#include <linux/miscdevice.h>
> +#include <linux/kernel.h>
> +#include <linux/delay.h>
> +#include <linux/wait.h>
> +#include <linux/freezer.h>
> +#include <linux/string.h>
> +#include <linux/interrupt.h>
> +#include <linux/gpio.h>
> +#include <linux/sched.h>
> +#include <linux/uaccess.h>
> +#include <linux/io.h>
> +#include <linux/slab.h>
> +
> +#include "../tpm.h"
> +#include "st33zp24.h"
> +
> +#define TPM_ACCESS			0x0
> +#define TPM_STS				0x18
> +#define TPM_DATA_FIFO			0x24
> +#define TPM_INTF_CAPABILITY		0x14
> +#define TPM_INT_STATUS			0x10
> +#define TPM_INT_ENABLE			0x08
> +
> +#define LOCALITY0			0
> +
> +enum st33zp24_access {
> +	TPM_ACCESS_VALID = 0x80,
> +	TPM_ACCESS_ACTIVE_LOCALITY = 0x20,
> +	TPM_ACCESS_REQUEST_PENDING = 0x04,
> +	TPM_ACCESS_REQUEST_USE = 0x02,
> +};
> +
> +enum st33zp24_status {
> +	TPM_STS_VALID = 0x80,
> +	TPM_STS_COMMAND_READY = 0x40,
> +	TPM_STS_GO = 0x20,
> +	TPM_STS_DATA_AVAIL = 0x10,
> +	TPM_STS_DATA_EXPECT = 0x08,
> +};
> +
> +enum st33zp24_int_flags {
> +	TPM_GLOBAL_INT_ENABLE = 0x80,
> +	TPM_INTF_CMD_READY_INT = 0x080,
> +	TPM_INTF_FIFO_AVALAIBLE_INT = 0x040,
> +	TPM_INTF_WAKE_UP_READY_INT = 0x020,
> +	TPM_INTF_LOCALITY_CHANGE_INT = 0x004,
> +	TPM_INTF_STS_VALID_INT = 0x002,
> +	TPM_INTF_DATA_AVAIL_INT = 0x001,
> +};
> +
> +enum tis_defaults {
> +	TIS_SHORT_TIMEOUT = 750,
> +	TIS_LONG_TIMEOUT = 2000,
> +};
> +
> +struct st33zp24_dev {
> +	struct tpm_chip *chip;
> +	void *phy_id;
> +	const struct st33zp24_phy_ops *ops;
> +	u32 intrs;
> +	int io_lpcpd;
> +};
> +
> +/*
> + * clear_interruption clear the pending interrupt.
> + * @param: tpm_dev, the tpm device device.
> + * @return: the interrupt status value.
> + */
> +static u8 clear_interruption(struct st33zp24_dev *tpm_dev)
> +{
> +	u8 interrupt;
> +
> +	tpm_dev->ops->recv(tpm_dev->phy_id, TPM_INT_STATUS, &interrupt, 1);
> +	tpm_dev->ops->send(tpm_dev->phy_id, TPM_INT_STATUS, &interrupt, 1);
> +	return interrupt;
> +} /* clear_interruption() */
> +
> +/*
> + * st33zp24_cancel, cancel the current command execution or
> + * set STS to COMMAND READY.
> + * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h
> + */
> +static void st33zp24_cancel(struct tpm_chip *chip)
> +{
> +	struct st33zp24_dev *tpm_dev;
> +	u8 data;
> +
> +	tpm_dev = (struct st33zp24_dev *)TPM_VPRIV(chip);
> +
> +	data = TPM_STS_COMMAND_READY;
> +	tpm_dev->ops->send(tpm_dev->phy_id, TPM_STS, &data, 1);
> +} /* st33zp24_cancel() */
> +
> +/*
> + * st33zp24_status return the TPM_STS register
> + * @param: chip, the tpm chip description
> + * @return: the TPM_STS register value.
> + */
> +static u8 st33zp24_status(struct tpm_chip *chip)
> +{
> +	struct st33zp24_dev *tpm_dev;
> +	u8 data;
> +
> +	tpm_dev = (struct st33zp24_dev *)TPM_VPRIV(chip);
> +
> +	tpm_dev->ops->recv(tpm_dev->phy_id, TPM_STS, &data, 1);
> +	return data;
> +} /* st33zp24_status() */
> +
> +/*
> + * check_locality if the locality is active
> + * @param: chip, the tpm chip description
> + * @return: the active locality or -EACCESS.
> + */
> +static int check_locality(struct tpm_chip *chip)
> +{
> +	struct st33zp24_dev *tpm_dev;
> +	u8 data;
> +	u8 status;
> +
> +	tpm_dev = (struct st33zp24_dev *)TPM_VPRIV(chip);
> +
> +	status = tpm_dev->ops->recv(tpm_dev->phy_id, TPM_ACCESS, &data, 1);
> +	if (status && (data &
> +		(TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) ==
> +		(TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID))
> +		return chip->vendor.locality;
> +
> +	return -EACCES;
> +} /* check_locality() */
> +
> +/*
> + * request_locality request the TPM locality
> + * @param: chip, the chip description
> + * @return: the active locality or negative value.
> + */
> +static int request_locality(struct tpm_chip *chip)
> +{
> +	unsigned long stop;
> +	long ret;
> +	struct st33zp24_dev *tpm_dev;
> +	u8 data;
> +
> +	if (check_locality(chip) == chip->vendor.locality)
> +		return chip->vendor.locality;
> +
> +	tpm_dev = (struct st33zp24_dev *)TPM_VPRIV(chip);
> +
> +	data = TPM_ACCESS_REQUEST_USE;
> +	ret = tpm_dev->ops->send(tpm_dev->phy_id, TPM_ACCESS, &data, 1);
> +	if (ret < 0)
> +		return ret;
> +
> +	stop = jiffies + chip->vendor.timeout_a;
> +
> +	/* Request locality is usually effective after the request */
> +	do {
> +		if (check_locality(chip) >= 0)
> +			return chip->vendor.locality;
> +		msleep(TPM_TIMEOUT);
> +	} while (time_before(jiffies, stop));
> +
> +	/* could not get locality */
> +	return -EACCES;
> +} /* request_locality() */
> +
> +/*
> + * release_locality release the active locality
> + * @param: chip, the tpm chip description.
> + */
> +static void release_locality(struct tpm_chip *chip)
> +{
> +	struct st33zp24_dev *tpm_dev;
> +	u8 data;
> +
> +	tpm_dev = (struct st33zp24_dev *)TPM_VPRIV(chip);
> +	data = TPM_ACCESS_ACTIVE_LOCALITY;
> +
> +	tpm_dev->ops->send(tpm_dev->phy_id, TPM_ACCESS, &data, 1);
> +}
> +
> +/*
> + * get_burstcount return the burstcount value
> + * @param: chip, the chip description
> + * return: the burstcount or negative value.
> + */
> +static int get_burstcount(struct tpm_chip *chip)
> +{
> +	unsigned long stop;
> +	int burstcnt, status;
> +	u8 tpm_reg, temp;
> +	struct st33zp24_dev *tpm_dev;
> +
> +	tpm_dev = (struct st33zp24_dev *)TPM_VPRIV(chip);
> +
> +	stop = jiffies + chip->vendor.timeout_d;
> +	do {
> +		tpm_reg = TPM_STS + 1;
> +		status = tpm_dev->ops->recv(tpm_dev->phy_id, tpm_reg, &temp, 1);
> +		if (status < 0)
> +			return -EBUSY;
> +
> +		tpm_reg = TPM_STS + 1;
> +		burstcnt = temp;
> +		status = tpm_dev->ops->recv(tpm_dev->phy_id, tpm_reg, &temp, 1);
> +		if (status < 0)
> +			return -EBUSY;
> +
> +		burstcnt |= temp << 8;
> +		if (burstcnt)
> +			return burstcnt;
> +		msleep(TPM_TIMEOUT);
> +	} while (time_before(jiffies, stop));
> +	return -EBUSY;
> +} /* get_burstcount() */
> +
> +
> +/*
> + * wait_for_tpm_stat_cond
> + * @param: chip, chip description
> + * @param: mask, expected mask value
> + * @param: check_cancel, does the command expected to be canceled ?
> + * @param: canceled, did we received a cancel request ?
> + * @return: true if status == mask or if the command is canceled.
> + * false in other cases.
> + */
> +static bool wait_for_tpm_stat_cond(struct tpm_chip *chip, u8 mask,
> +				bool check_cancel, bool *canceled)
> +{
> +	u8 status = chip->ops->status(chip);
> +
> +	*canceled = false;
> +	if ((status & mask) == mask)
> +		return true;
> +	if (check_cancel && chip->ops->req_canceled(chip, status)) {
> +		*canceled = true;
> +		return true;
> +	}
> +	return false;
> +}
> +
> +/*
> + * wait_for_stat wait for a TPM_STS value
> + * @param: chip, the tpm chip description
> + * @param: mask, the value mask to wait
> + * @param: timeout, the timeout
> + * @param: queue, the wait queue.
> + * @param: check_cancel, does the command can be cancelled ?
> + * @return: the tpm status, 0 if success, -ETIME if timeout is reached.
> + */
> +static int wait_for_stat(struct tpm_chip *chip, u8 mask, unsigned long timeout,
> +			wait_queue_head_t *queue, bool check_cancel)
> +{
> +	unsigned long stop;
> +	int ret;
> +	bool canceled = false;
> +	bool condition;
> +	u32 cur_intrs;
> +	u8 status;
> +	struct st33zp24_dev *tpm_dev;
> +
> +	tpm_dev = (struct st33zp24_dev *)TPM_VPRIV(chip);
> +
> +	/* check current status */
> +	status = st33zp24_status(chip);
> +	if ((status & mask) == mask)
> +		return 0;
> +
> +	stop = jiffies + timeout;
> +
> +	if (chip->vendor.irq) {
> +		cur_intrs = tpm_dev->intrs;
> +		clear_interruption(tpm_dev);
> +		enable_irq(chip->vendor.irq);
> +
> +		do {
> +			if (ret == -ERESTARTSYS && freezing(current))
> +				clear_thread_flag(TIF_SIGPENDING);
> +
> +			timeout = stop - jiffies;
> +			if ((long) timeout <= 0)
> +				return -1;
> +
> +			ret = wait_event_interruptible_timeout(*queue,
> +						cur_intrs != tpm_dev->intrs,
> +						timeout);
> +			clear_interruption(tpm_dev);
> +			condition = wait_for_tpm_stat_cond(chip, mask,
> +						check_cancel, &canceled);
> +			if (ret >= 0 && condition) {
> +				if (canceled)
> +					return -ECANCELED;
> +				return 0;
> +			}
> +		} while (ret == -ERESTARTSYS && freezing(current));
> +
> +		disable_irq_nosync(chip->vendor.irq);
> +
> +	} else {
> +		do {
> +			msleep(TPM_TIMEOUT);
> +			status = chip->ops->status(chip);
> +			if ((status & mask) == mask)
> +				return 0;
> +		} while (time_before(jiffies, stop));
> +	}
> +
> +	return -ETIME;
> +} /* wait_for_stat() */
> +
> +/*
> + * recv_data receive data
> + * @param: chip, the tpm chip description
> + * @param: buf, the buffer where the data are received
> + * @param: count, the number of data to receive
> + * @return: the number of bytes read from TPM FIFO.
> + */
> +static int recv_data(struct tpm_chip *chip, u8 *buf, size_t count)
> +{
> +	int size = 0, burstcnt, len, ret;
> +	struct st33zp24_dev *tpm_dev;
> +
> +	tpm_dev = (struct st33zp24_dev *)TPM_VPRIV(chip);
> +
> +	while (size < count &&
> +	       wait_for_stat(chip,
> +			     TPM_STS_DATA_AVAIL | TPM_STS_VALID,
> +			     chip->vendor.timeout_c,
> +			     &chip->vendor.read_queue, true) == 0) {
> +		burstcnt = get_burstcount(chip);
> +		if (burstcnt < 0)
> +			return burstcnt;
> +		len = min_t(int, burstcnt, count - size);
> +		ret = tpm_dev->ops->recv(tpm_dev->phy_id, TPM_DATA_FIFO,
> +					 buf + size, len);
> +		if (ret < 0)
> +			return ret;
> +
> +		size += len;
> +	}
> +	return size;
> +}
> +
> +/*
> + * tpm_ioserirq_handler the serirq irq handler
> + * @param: irq, the tpm chip description
> + * @param: dev_id, the description of the chip
> + * @return: the status of the handler.
> + */
> +static irqreturn_t tpm_ioserirq_handler(int irq, void *dev_id)
> +{
> +	struct tpm_chip *chip = dev_id;
> +	struct st33zp24_dev *tpm_dev;
> +
> +	tpm_dev = (struct st33zp24_dev *)TPM_VPRIV(chip);
> +
> +	tpm_dev->intrs++;
> +	wake_up_interruptible(&chip->vendor.read_queue);
> +	disable_irq_nosync(chip->vendor.irq);
> +
> +	return IRQ_HANDLED;
> +} /* tpm_ioserirq_handler() */
> +
> +/*
> + * st33zp24_send send TPM commands through the I2C bus.
> + *
> + * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h
> + * @param: buf,	the buffer to send.
> + * @param: count, the number of bytes to send.
> + * @return: In case of success the number of bytes sent.
> + *			In other case, a < 0 value describing the issue.
> + */
> +static int st33zp24_send(struct tpm_chip *chip, unsigned char *buf,
> +			 size_t len)
> +{
> +	u32 status, i, size;
> +	int burstcnt = 0;
> +	int ret;
> +	u8 data;
> +	struct st33zp24_dev *tpm_dev;
> +
> +	if (!chip)
> +		return -EBUSY;
> +	if (len < TPM_HEADER_SIZE)
> +		return -EBUSY;
> +
> +	tpm_dev = (struct st33zp24_dev *)TPM_VPRIV(chip);
> +
> +	ret = request_locality(chip);
> +	if (ret < 0)
> +		return ret;
> +
> +	status = st33zp24_status(chip);
> +	if ((status & TPM_STS_COMMAND_READY) == 0) {
> +		st33zp24_cancel(chip);
> +		if (wait_for_stat
> +		    (chip, TPM_STS_COMMAND_READY, chip->vendor.timeout_b,
> +		     &chip->vendor.read_queue, false) < 0) {
> +			ret = -ETIME;
> +			goto out_err;
> +		}
> +	}
> +
> +	for (i = 0; i < len - 1;) {
> +		burstcnt = get_burstcount(chip);
> +		if (burstcnt < 0)
> +			return burstcnt;
> +		size = min_t(int, len - i - 1, burstcnt);
> +		ret = tpm_dev->ops->send(tpm_dev->phy_id, TPM_DATA_FIFO,
> +					 buf + i, size);
> +		if (ret < 0)
> +			goto out_err;
> +
> +		i += size;
> +	}
> +
> +	status = st33zp24_status(chip);
> +	if ((status & TPM_STS_DATA_EXPECT) == 0) {
> +		ret = -EIO;
> +		goto out_err;
> +	}
> +
> +	ret = tpm_dev->ops->send(tpm_dev->phy_id, TPM_DATA_FIFO,
> +				 buf + len - 1, 1);
> +	if (ret < 0)
> +		goto out_err;
> +
> +	status = st33zp24_status(chip);
> +	if ((status & TPM_STS_DATA_EXPECT) != 0) {
> +		ret = -EIO;
> +		goto out_err;
> +	}
> +
> +	data = TPM_STS_GO;
> +	ret = tpm_dev->ops->send(tpm_dev->phy_id, TPM_STS, &data, 1);
> +	if (ret < 0)
> +		goto out_err;
> +
> +	return len;
> +out_err:
> +	st33zp24_cancel(chip);
> +	release_locality(chip);
> +	return ret;
> +}
> +
> +/*
> + * st33zp24_recv received TPM response through TPM phy.
> + * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h.
> + * @param: buf,	the buffer to store datas.
> + * @param: count, the number of bytes to send.
> + * @return: In case of success the number of bytes received.
> + *	    In other case, a < 0 value describing the issue.
> + */
> +static int st33zp24_recv(struct tpm_chip *chip, unsigned char *buf,
> +			    size_t count)
> +{
> +	int size = 0;
> +	int expected;
> +
> +	if (!chip)
> +		return -EBUSY;
> +
> +	if (count < TPM_HEADER_SIZE) {
> +		size = -EIO;
> +		goto out;
> +	}
> +
> +	size = recv_data(chip, buf, TPM_HEADER_SIZE);
> +	if (size < TPM_HEADER_SIZE) {
> +		dev_err(&chip->dev, "Unable to read header\n");
> +		goto out;
> +	}
> +
> +	expected = be32_to_cpu(*(__be32 *)(buf + 2));
> +	if (expected > count) {
> +		size = -EIO;
> +		goto out;
> +	}
> +
> +	size += recv_data(chip, &buf[TPM_HEADER_SIZE],
> +			expected - TPM_HEADER_SIZE);
> +	if (size < expected) {
> +		dev_err(&chip->dev, "Unable to read remainder of result\n");
> +		size = -ETIME;
> +	}
> +
> +out:
> +	st33zp24_cancel(chip);
> +	release_locality(chip);
> +	return size;
> +}
> +
> +/*
> + * st33zp24_req_canceled
> + * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h.
> + * @param: status, the TPM status.
> + * @return: Does TPM ready to compute a new command ? true.
> + */
> +static bool st33zp24_req_canceled(struct tpm_chip *chip, u8 status)
> +{
> +	return (status == TPM_STS_COMMAND_READY);
> +}
> +
> +static const struct tpm_class_ops st33zp24_tpm = {
> +	.send = st33zp24_send,
> +	.recv = st33zp24_recv,
> +	.cancel = st33zp24_cancel,
> +	.status = st33zp24_status,
> +	.req_complete_mask = TPM_STS_DATA_AVAIL | TPM_STS_VALID,
> +	.req_complete_val = TPM_STS_DATA_AVAIL | TPM_STS_VALID,
> +	.req_canceled = st33zp24_req_canceled,
> +};
> +
> +/*
> + * st33zp24_probe initialize the TPM device
> + * @param: client, the i2c_client drescription (TPM I2C description).
> + * @param: id, the i2c_device_id struct.
> + * @return: 0 in case of success.
> + *	 -1 in other case.
> + */
> +int st33zp24_probe(void *phy_id, const struct st33zp24_phy_ops *ops,
> +		   struct device *dev, int irq, int io_lpcpd)
> +{
> +	int ret;
> +	u8 intmask = 0;
> +	struct tpm_chip *chip;
> +	struct st33zp24_dev *tpm_dev;
> +
> +	chip = tpmm_chip_alloc(dev, &st33zp24_tpm);
> +	if (IS_ERR(chip))
> +		return PTR_ERR(chip);
> +
> +	tpm_dev = devm_kzalloc(dev, sizeof(struct st33zp24_dev),
> +			       GFP_KERNEL);
> +	if (!tpm_dev)
> +		return -ENOMEM;
> +
> +	TPM_VPRIV(chip) = tpm_dev;
> +	tpm_dev->phy_id = phy_id;
> +	tpm_dev->ops = ops;
> +
> +	chip->vendor.timeout_a = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
> +	chip->vendor.timeout_b = msecs_to_jiffies(TIS_LONG_TIMEOUT);
> +	chip->vendor.timeout_c = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
> +	chip->vendor.timeout_d = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
> +
> +	chip->vendor.locality = LOCALITY0;
> +
> +	if (irq) {
> +		/* INTERRUPT Setup */
> +		init_waitqueue_head(&chip->vendor.read_queue);
> +		tpm_dev->intrs = 0;
> +
> +		if (request_locality(chip) != LOCALITY0) {
> +			ret = -ENODEV;
> +			goto _tpm_clean_answer;
> +		}
> +
> +		clear_interruption(tpm_dev);
> +		ret = devm_request_irq(dev, irq, tpm_ioserirq_handler,
> +				IRQF_TRIGGER_HIGH, "TPM SERIRQ management",
> +				chip);
> +		if (ret < 0) {
> +			dev_err(&chip->dev, "TPM SERIRQ signals %d not available\n",
> +				irq);
> +			goto _tpm_clean_answer;
> +		}
> +
> +		intmask |= TPM_INTF_CMD_READY_INT
> +			|  TPM_INTF_STS_VALID_INT
> +			|  TPM_INTF_DATA_AVAIL_INT;
> +
> +		ret = tpm_dev->ops->send(tpm_dev->phy_id, TPM_INT_ENABLE,
> +					 &intmask, 1);
> +		if (ret < 0)
> +			goto _tpm_clean_answer;
> +
> +		intmask = TPM_GLOBAL_INT_ENABLE;
> +		ret = tpm_dev->ops->send(tpm_dev->phy_id, (TPM_INT_ENABLE + 3),
> +					 &intmask, 1);
> +		if (ret < 0)
> +			goto _tpm_clean_answer;
> +
> +		chip->vendor.irq = irq;
> +
> +		disable_irq_nosync(chip->vendor.irq);
> +
> +		tpm_gen_interrupt(chip);
> +	}
> +
> +	tpm_get_timeouts(chip);
> +	tpm_do_selftest(chip);
> +
> +	return tpm_chip_register(chip);
> +_tpm_clean_answer:
> +	dev_info(&chip->dev, "TPM initialization fail\n");
> +	return ret;
> +}
> +EXPORT_SYMBOL(st33zp24_probe);
> +
> +/*
> + * st33zp24_remove remove the TPM device
> + * @param: tpm_data, the tpm phy.
> + * @return: 0 in case of success.
> + */
> +int st33zp24_remove(struct tpm_chip *chip)
> +{
> +	tpm_chip_unregister(chip);
> +	return 0;
> +}
> +EXPORT_SYMBOL(st33zp24_remove);
> +
> +#ifdef CONFIG_PM_SLEEP
> +/*
> + * st33zp24_pm_suspend suspend the TPM device
> + * @param: tpm_data, the tpm phy.
> + * @param: mesg, the power management message.
> + * @return: 0 in case of success.
> + */
> +int st33zp24_pm_suspend(struct device *dev)
> +{
> +	struct tpm_chip *chip = dev_get_drvdata(dev);
> +	struct st33zp24_dev *tpm_dev;
> +	int ret = 0;
> +
> +	tpm_dev = (struct st33zp24_dev *)TPM_VPRIV(chip);
> +
> +	if (gpio_is_valid(tpm_dev->io_lpcpd))
> +		gpio_set_value(tpm_dev->io_lpcpd, 0);
> +	else
> +		ret = tpm_pm_suspend(dev);
> +
> +	return ret;
> +} /* st33zp24_pm_suspend() */
> +EXPORT_SYMBOL(st33zp24_pm_suspend);
> +
> +/*
> + * st33zp24_pm_resume resume the TPM device
> + * @param: tpm_data, the tpm phy.
> + * @return: 0 in case of success.
> + */
> +int st33zp24_pm_resume(struct device *dev)
> +{
> +	struct tpm_chip *chip = dev_get_drvdata(dev);
> +	struct st33zp24_dev *tpm_dev;
> +	int ret = 0;
> +
> +	tpm_dev = (struct st33zp24_dev *)TPM_VPRIV(chip);
> +
> +	if (gpio_is_valid(tpm_dev->io_lpcpd)) {
> +		gpio_set_value(tpm_dev->io_lpcpd, 1);
> +		ret = wait_for_stat(chip,
> +				TPM_STS_VALID, chip->vendor.timeout_b,
> +				&chip->vendor.read_queue, false);
> +	} else {
> +		ret = tpm_pm_resume(dev);
> +		if (!ret)
> +			tpm_do_selftest(chip);
> +	}
> +	return ret;
> +} /* st33zp24_pm_resume() */
> +EXPORT_SYMBOL(st33zp24_pm_resume);
> +#endif
> +
> +MODULE_AUTHOR("TPM support (TPMsupport-nkJGhpqTU55BDgjK7y7TUQ@public.gmane.org)");
> +MODULE_DESCRIPTION("ST33ZP24 TPM 1.2 driver");
> +MODULE_VERSION("1.3.0");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/char/tpm/st33zp24/st33zp24.h b/drivers/char/tpm/st33zp24/st33zp24.h
> new file mode 100644
> index 0000000..43ad39a
> --- /dev/null
> +++ b/drivers/char/tpm/st33zp24/st33zp24.h
> @@ -0,0 +1,34 @@
> +/*
> + * STMicroelectronics TPM Linux driver for TPM ST33ZP24
> + * Copyright (C) 2009 - 2015  STMicroelectronics
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#ifndef __LOCAL_ST33ZP24_H__
> +#define __LOCAL_ST33ZP24_H__
> +
> +struct st33zp24_phy_ops {
> +	int (*send)(void *phy_id, u8 tpm_register, u8 *tpm_data, int tpm_size);
> +	int (*recv)(void *phy_id, u8 tpm_register, u8 *tpm_data, int tpm_size);
> +};
> +
> +#ifdef CONFIG_PM_SLEEP
> +int st33zp24_pm_suspend(struct device *dev);
> +int st33zp24_pm_resume(struct device *dev);
> +#endif
> +
> +int st33zp24_probe(void *phy_id, const struct st33zp24_phy_ops *ops,
> +		   struct device *dev, int irq, int io_lpcpd);
> +int st33zp24_remove(struct tpm_chip *chip);
> +#endif /* __LOCAL_ST33ZP24_H__ */
> diff --git a/drivers/char/tpm/tpm_i2c_stm_st33.c b/drivers/char/tpm/tpm_i2c_stm_st33.c
> deleted file mode 100644
> index 882c60a..0000000
> --- a/drivers/char/tpm/tpm_i2c_stm_st33.c
> +++ /dev/null
> @@ -1,915 +0,0 @@
> -/*
> - * STMicroelectronics TPM I2C Linux driver for TPM ST33ZP24
> - * Copyright (C) 2009, 2010, 2014  STMicroelectronics
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> - * the Free Software Foundation; either version 2 of the License, or
> - * (at your option) any later version.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, see <http://www.gnu.org/licenses/>.
> - *
> - * STMicroelectronics version 1.2.1, Copyright (C) 2014
> - * STMicroelectronics comes with ABSOLUTELY NO WARRANTY.
> - * This is free software, and you are welcome to redistribute it
> - * under certain conditions.
> - *
> - * @Author: Christophe RICARD tpmsupport-qxv4g6HH51o@public.gmane.org
> - *
> - * @File: tpm_stm_st33_i2c.c
> - *
> - * @Synopsis:
> - *	09/15/2010:	First shot driver tpm_tis driver for
> - *			 lpc is used as model.
> - */
> -
> -#include <linux/pci.h>
> -#include <linux/module.h>
> -#include <linux/platform_device.h>
> -#include <linux/i2c.h>
> -#include <linux/fs.h>
> -#include <linux/miscdevice.h>
> -#include <linux/kernel.h>
> -#include <linux/delay.h>
> -#include <linux/wait.h>
> -#include <linux/freezer.h>
> -#include <linux/string.h>
> -#include <linux/interrupt.h>
> -#include <linux/sysfs.h>
> -#include <linux/gpio.h>
> -#include <linux/sched.h>
> -#include <linux/uaccess.h>
> -#include <linux/io.h>
> -#include <linux/slab.h>
> -#include <linux/of_irq.h>
> -#include <linux/of_gpio.h>
> -
> -#include <linux/platform_data/tpm_stm_st33.h>
> -#include "tpm.h"
> -
> -#define TPM_ACCESS			0x0
> -#define TPM_STS				0x18
> -#define TPM_HASH_END			0x20
> -#define TPM_DATA_FIFO			0x24
> -#define TPM_HASH_DATA			0x24
> -#define TPM_HASH_START			0x28
> -#define TPM_INTF_CAPABILITY		0x14
> -#define TPM_INT_STATUS			0x10
> -#define TPM_INT_ENABLE			0x08
> -
> -#define TPM_DUMMY_BYTE			0xAA
> -#define TPM_WRITE_DIRECTION		0x80
> -#define TPM_HEADER_SIZE			10
> -#define TPM_BUFSIZE			2048
> -
> -#define LOCALITY0		0
> -
> -
> -enum stm33zp24_access {
> -	TPM_ACCESS_VALID = 0x80,
> -	TPM_ACCESS_ACTIVE_LOCALITY = 0x20,
> -	TPM_ACCESS_REQUEST_PENDING = 0x04,
> -	TPM_ACCESS_REQUEST_USE = 0x02,
> -};
> -
> -enum stm33zp24_status {
> -	TPM_STS_VALID = 0x80,
> -	TPM_STS_COMMAND_READY = 0x40,
> -	TPM_STS_GO = 0x20,
> -	TPM_STS_DATA_AVAIL = 0x10,
> -	TPM_STS_DATA_EXPECT = 0x08,
> -};
> -
> -enum stm33zp24_int_flags {
> -	TPM_GLOBAL_INT_ENABLE = 0x80,
> -	TPM_INTF_CMD_READY_INT = 0x080,
> -	TPM_INTF_FIFO_AVALAIBLE_INT = 0x040,
> -	TPM_INTF_WAKE_UP_READY_INT = 0x020,
> -	TPM_INTF_LOCALITY_CHANGE_INT = 0x004,
> -	TPM_INTF_STS_VALID_INT = 0x002,
> -	TPM_INTF_DATA_AVAIL_INT = 0x001,
> -};
> -
> -enum tis_defaults {
> -	TIS_SHORT_TIMEOUT = 750,
> -	TIS_LONG_TIMEOUT = 2000,
> -};
> -
> -struct tpm_stm_dev {
> -	struct i2c_client *client;
> -	struct tpm_chip *chip;
> -	u8 buf[TPM_BUFSIZE + 1];
> -	u32 intrs;
> -	int io_lpcpd;
> -};
> -
> -/*
> - * write8_reg
> - * Send byte to the TIS register according to the ST33ZP24 I2C protocol.
> - * @param: tpm_register, the tpm tis register where the data should be written
> - * @param: tpm_data, the tpm_data to write inside the tpm_register
> - * @param: tpm_size, The length of the data
> - * @return: Returns negative errno, or else the number of bytes written.
> - */
> -static int write8_reg(struct tpm_stm_dev *tpm_dev, u8 tpm_register,
> -		      u8 *tpm_data, u16 tpm_size)
> -{
> -	tpm_dev->buf[0] = tpm_register;
> -	memcpy(tpm_dev->buf + 1, tpm_data, tpm_size);
> -	return i2c_master_send(tpm_dev->client, tpm_dev->buf, tpm_size + 1);
> -} /* write8_reg() */
> -
> -/*
> - * read8_reg
> - * Recv byte from the TIS register according to the ST33ZP24 I2C protocol.
> - * @param: tpm_register, the tpm tis register where the data should be read
> - * @param: tpm_data, the TPM response
> - * @param: tpm_size, tpm TPM response size to read.
> - * @return: number of byte read successfully: should be one if success.
> - */
> -static int read8_reg(struct tpm_stm_dev *tpm_dev, u8 tpm_register,
> -		    u8 *tpm_data, int tpm_size)
> -{
> -	u8 status = 0;
> -	u8 data;
> -
> -	data = TPM_DUMMY_BYTE;
> -	status = write8_reg(tpm_dev, tpm_register, &data, 1);
> -	if (status == 2)
> -		status = i2c_master_recv(tpm_dev->client, tpm_data, tpm_size);
> -	return status;
> -} /* read8_reg() */
> -
> -/*
> - * I2C_WRITE_DATA
> - * Send byte to the TIS register according to the ST33ZP24 I2C protocol.
> - * @param: tpm_dev, the chip description
> - * @param: tpm_register, the tpm tis register where the data should be written
> - * @param: tpm_data, the tpm_data to write inside the tpm_register
> - * @param: tpm_size, The length of the data
> - * @return: number of byte written successfully: should be one if success.
> - */
> -#define I2C_WRITE_DATA(tpm_dev, tpm_register, tpm_data, tpm_size) \
> -	(write8_reg(tpm_dev, tpm_register | \
> -	TPM_WRITE_DIRECTION, tpm_data, tpm_size))
> -
> -/*
> - * I2C_READ_DATA
> - * Recv byte from the TIS register according to the ST33ZP24 I2C protocol.
> - * @param: tpm_dev, the chip description
> - * @param: tpm_register, the tpm tis register where the data should be read
> - * @param: tpm_data, the TPM response
> - * @param: tpm_size, tpm TPM response size to read.
> - * @return: number of byte read successfully: should be one if success.
> - */
> -#define I2C_READ_DATA(tpm_dev, tpm_register, tpm_data, tpm_size) \
> -	(read8_reg(tpm_dev, tpm_register, tpm_data, tpm_size))
> -
> -/*
> - * clear_interruption
> - * clear the TPM interrupt register.
> - * @param: tpm, the chip description
> - * @return: the TPM_INT_STATUS value
> - */
> -static u8 clear_interruption(struct tpm_stm_dev *tpm_dev)
> -{
> -	u8 interrupt;
> -
> -	I2C_READ_DATA(tpm_dev, TPM_INT_STATUS, &interrupt, 1);
> -	I2C_WRITE_DATA(tpm_dev, TPM_INT_STATUS, &interrupt, 1);
> -	return interrupt;
> -} /* clear_interruption() */
> -
> -/*
> - * tpm_stm_i2c_cancel, cancel is not implemented.
> - * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h
> - */
> -static void tpm_stm_i2c_cancel(struct tpm_chip *chip)
> -{
> -	struct tpm_stm_dev *tpm_dev;
> -	u8 data;
> -
> -	tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip);
> -
> -	data = TPM_STS_COMMAND_READY;
> -	I2C_WRITE_DATA(tpm_dev, TPM_STS, &data, 1);
> -} /* tpm_stm_i2c_cancel() */
> -
> -/*
> - * tpm_stm_spi_status return the TPM_STS register
> - * @param: chip, the tpm chip description
> - * @return: the TPM_STS register value.
> - */
> -static u8 tpm_stm_i2c_status(struct tpm_chip *chip)
> -{
> -	struct tpm_stm_dev *tpm_dev;
> -	u8 data;
> -
> -	tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip);
> -
> -	I2C_READ_DATA(tpm_dev, TPM_STS, &data, 1);
> -	return data;
> -} /* tpm_stm_i2c_status() */
> -
> -
> -/*
> - * check_locality if the locality is active
> - * @param: chip, the tpm chip description
> - * @return: the active locality or -EACCESS.
> - */
> -static int check_locality(struct tpm_chip *chip)
> -{
> -	struct tpm_stm_dev *tpm_dev;
> -	u8 data;
> -	u8 status;
> -
> -	tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip);
> -
> -	status = I2C_READ_DATA(tpm_dev, TPM_ACCESS, &data, 1);
> -	if (status && (data &
> -		(TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) ==
> -		(TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID))
> -		return chip->vendor.locality;
> -
> -	return -EACCES;
> -} /* check_locality() */
> -
> -/*
> - * request_locality request the TPM locality
> - * @param: chip, the chip description
> - * @return: the active locality or EACCESS.
> - */
> -static int request_locality(struct tpm_chip *chip)
> -{
> -	unsigned long stop;
> -	long ret;
> -	struct tpm_stm_dev *tpm_dev;
> -	u8 data;
> -
> -	if (check_locality(chip) == chip->vendor.locality)
> -		return chip->vendor.locality;
> -
> -	tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip);
> -
> -	data = TPM_ACCESS_REQUEST_USE;
> -	ret = I2C_WRITE_DATA(tpm_dev, TPM_ACCESS, &data, 1);
> -	if (ret < 0)
> -		goto end;
> -
> -	stop = jiffies + chip->vendor.timeout_a;
> -
> -	/* Request locality is usually effective after the request */
> -	do {
> -		if (check_locality(chip) >= 0)
> -			return chip->vendor.locality;
> -		msleep(TPM_TIMEOUT);
> -	} while (time_before(jiffies, stop));
> -	ret = -EACCES;
> -end:
> -	return ret;
> -} /* request_locality() */
> -
> -/*
> - * release_locality release the active locality
> - * @param: chip, the tpm chip description.
> - */
> -static void release_locality(struct tpm_chip *chip)
> -{
> -	struct tpm_stm_dev *tpm_dev;
> -	u8 data;
> -
> -	tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip);
> -	data = TPM_ACCESS_ACTIVE_LOCALITY;
> -
> -	I2C_WRITE_DATA(tpm_dev, TPM_ACCESS, &data, 1);
> -}
> -
> -/*
> - * get_burstcount return the burstcount address 0x19 0x1A
> - * @param: chip, the chip description
> - * return: the burstcount.
> - */
> -static int get_burstcount(struct tpm_chip *chip)
> -{
> -	unsigned long stop;
> -	int burstcnt, status;
> -	u8 tpm_reg, temp;
> -	struct tpm_stm_dev *tpm_dev;
> -
> -	tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip);
> -
> -	stop = jiffies + chip->vendor.timeout_d;
> -	do {
> -		tpm_reg = TPM_STS + 1;
> -		status = I2C_READ_DATA(tpm_dev, tpm_reg, &temp, 1);
> -		if (status < 0)
> -			goto end;
> -
> -		tpm_reg = tpm_reg + 1;
> -		burstcnt = temp;
> -		status = I2C_READ_DATA(tpm_dev, tpm_reg, &temp, 1);
> -		if (status < 0)
> -			goto end;
> -
> -		burstcnt |= temp << 8;
> -		if (burstcnt)
> -			return burstcnt;
> -		msleep(TPM_TIMEOUT);
> -	} while (time_before(jiffies, stop));
> -
> -end:
> -	return -EBUSY;
> -} /* get_burstcount() */
> -
> -static bool wait_for_tpm_stat_cond(struct tpm_chip *chip, u8 mask,
> -				bool check_cancel, bool *canceled)
> -{
> -	u8 status = chip->ops->status(chip);
> -
> -	*canceled = false;
> -	if ((status & mask) == mask)
> -		return true;
> -	if (check_cancel && chip->ops->req_canceled(chip, status)) {
> -		*canceled = true;
> -		return true;
> -	}
> -	return false;
> -}
> -
> -/*
> - * interrupt_to_status
> - * @param: irq_mask, the irq mask value to wait
> - * @return: the corresponding tpm_sts value
> - */
> -static u8 interrupt_to_status(u8 irq_mask)
> -{
> -	u8 status = 0;
> -
> -	if ((irq_mask & TPM_INTF_STS_VALID_INT) == TPM_INTF_STS_VALID_INT)
> -		status |= TPM_STS_VALID;
> -	if ((irq_mask & TPM_INTF_DATA_AVAIL_INT) == TPM_INTF_DATA_AVAIL_INT)
> -		status |= TPM_STS_DATA_AVAIL;
> -	if ((irq_mask & TPM_INTF_CMD_READY_INT) == TPM_INTF_CMD_READY_INT)
> -		status |= TPM_STS_COMMAND_READY;
> -
> -	return status;
> -} /* status_to_interrupt() */
> -
> -/*
> - * wait_for_stat wait for a TPM_STS value
> - * @param: chip, the tpm chip description
> - * @param: mask, the value mask to wait
> - * @param: timeout, the timeout
> - * @param: queue, the wait queue.
> - * @param: check_cancel, does the command can be cancelled ?
> - * @return: the tpm status, 0 if success, -ETIME if timeout is reached.
> - */
> -static int wait_for_stat(struct tpm_chip *chip, u8 mask, unsigned long timeout,
> -			wait_queue_head_t *queue, bool check_cancel)
> -{
> -	unsigned long stop;
> -	int ret;
> -	bool canceled = false;
> -	bool condition;
> -	u32 cur_intrs;
> -	u8 interrupt, status;
> -	struct tpm_stm_dev *tpm_dev;
> -
> -	tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip);
> -
> -	/* check current status */
> -	status = tpm_stm_i2c_status(chip);
> -	if ((status & mask) == mask)
> -		return 0;
> -
> -	stop = jiffies + timeout;
> -
> -	if (chip->vendor.irq) {
> -		cur_intrs = tpm_dev->intrs;
> -		interrupt = clear_interruption(tpm_dev);
> -		enable_irq(chip->vendor.irq);
> -
> -again:
> -		timeout = stop - jiffies;
> -		if ((long) timeout <= 0)
> -			return -1;
> -
> -		ret = wait_event_interruptible_timeout(*queue,
> -					cur_intrs != tpm_dev->intrs, timeout);
> -
> -		interrupt |= clear_interruption(tpm_dev);
> -		status = interrupt_to_status(interrupt);
> -		condition = wait_for_tpm_stat_cond(chip, mask,
> -						   check_cancel, &canceled);
> -
> -		if (ret >= 0 && condition) {
> -			if (canceled)
> -				return -ECANCELED;
> -			return 0;
> -		}
> -		if (ret == -ERESTARTSYS && freezing(current)) {
> -			clear_thread_flag(TIF_SIGPENDING);
> -			goto again;
> -		}
> -		disable_irq_nosync(chip->vendor.irq);
> -
> -	} else {
> -		do {
> -			msleep(TPM_TIMEOUT);
> -			status = chip->ops->status(chip);
> -			if ((status & mask) == mask)
> -				return 0;
> -		} while (time_before(jiffies, stop));
> -	}
> -
> -	return -ETIME;
> -} /* wait_for_stat() */
> -
> -/*
> - * recv_data receive data
> - * @param: chip, the tpm chip description
> - * @param: buf, the buffer where the data are received
> - * @param: count, the number of data to receive
> - * @return: the number of bytes read from TPM FIFO.
> - */
> -static int recv_data(struct tpm_chip *chip, u8 *buf, size_t count)
> -{
> -	int size = 0, burstcnt, len, ret;
> -	struct tpm_stm_dev *tpm_dev;
> -
> -	tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip);
> -
> -	while (size < count &&
> -	       wait_for_stat(chip,
> -			     TPM_STS_DATA_AVAIL | TPM_STS_VALID,
> -			     chip->vendor.timeout_c,
> -			     &chip->vendor.read_queue, true) == 0) {
> -		burstcnt = get_burstcount(chip);
> -		if (burstcnt < 0)
> -			return burstcnt;
> -		len = min_t(int, burstcnt, count - size);
> -		ret = I2C_READ_DATA(tpm_dev, TPM_DATA_FIFO, buf + size, len);
> -		if (ret < 0)
> -			return ret;
> -
> -		size += len;
> -	}
> -	return size;
> -}
> -
> -/*
> - * tpm_ioserirq_handler the serirq irq handler
> - * @param: irq, the tpm chip description
> - * @param: dev_id, the description of the chip
> - * @return: the status of the handler.
> - */
> -static irqreturn_t tpm_ioserirq_handler(int irq, void *dev_id)
> -{
> -	struct tpm_chip *chip = dev_id;
> -	struct tpm_stm_dev *tpm_dev;
> -
> -	tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip);
> -
> -	tpm_dev->intrs++;
> -	wake_up_interruptible(&chip->vendor.read_queue);
> -	disable_irq_nosync(chip->vendor.irq);
> -
> -	return IRQ_HANDLED;
> -} /* tpm_ioserirq_handler() */
> -
> -
> -/*
> - * tpm_stm_i2c_send send TPM commands through the I2C bus.
> - *
> - * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h
> - * @param: buf,	the buffer to send.
> - * @param: count, the number of bytes to send.
> - * @return: In case of success the number of bytes sent.
> - *			In other case, a < 0 value describing the issue.
> - */
> -static int tpm_stm_i2c_send(struct tpm_chip *chip, unsigned char *buf,
> -			    size_t len)
> -{
> -	u32 status, i, size;
> -	int burstcnt = 0;
> -	int ret;
> -	u8 data;
> -	struct i2c_client *client;
> -	struct tpm_stm_dev *tpm_dev;
> -
> -	if (!chip)
> -		return -EBUSY;
> -	if (len < TPM_HEADER_SIZE)
> -		return -EBUSY;
> -
> -	tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip);
> -	client = tpm_dev->client;
> -
> -	client->flags = 0;
> -
> -	ret = request_locality(chip);
> -	if (ret < 0)
> -		return ret;
> -
> -	status = tpm_stm_i2c_status(chip);
> -	if ((status & TPM_STS_COMMAND_READY) == 0) {
> -		tpm_stm_i2c_cancel(chip);
> -		if (wait_for_stat
> -		    (chip, TPM_STS_COMMAND_READY, chip->vendor.timeout_b,
> -		     &chip->vendor.read_queue, false) < 0) {
> -			ret = -ETIME;
> -			goto out_err;
> -		}
> -	}
> -
> -	for (i = 0; i < len - 1;) {
> -		burstcnt = get_burstcount(chip);
> -		if (burstcnt < 0)
> -			return burstcnt;
> -		size = min_t(int, len - i - 1, burstcnt);
> -		ret = I2C_WRITE_DATA(tpm_dev, TPM_DATA_FIFO, buf + i, size);
> -		if (ret < 0)
> -			goto out_err;
> -
> -		i += size;
> -	}
> -
> -	status = tpm_stm_i2c_status(chip);
> -	if ((status & TPM_STS_DATA_EXPECT) == 0) {
> -		ret = -EIO;
> -		goto out_err;
> -	}
> -
> -	ret = I2C_WRITE_DATA(tpm_dev, TPM_DATA_FIFO, buf + len - 1, 1);
> -	if (ret < 0)
> -		goto out_err;
> -
> -	status = tpm_stm_i2c_status(chip);
> -	if ((status & TPM_STS_DATA_EXPECT) != 0) {
> -		ret = -EIO;
> -		goto out_err;
> -	}
> -
> -	data = TPM_STS_GO;
> -	I2C_WRITE_DATA(tpm_dev, TPM_STS, &data, 1);
> -
> -	return len;
> -out_err:
> -	tpm_stm_i2c_cancel(chip);
> -	release_locality(chip);
> -	return ret;
> -}
> -
> -/*
> - * tpm_stm_i2c_recv received TPM response through the I2C bus.
> - * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h.
> - * @param: buf,	the buffer to store datas.
> - * @param: count, the number of bytes to send.
> - * @return: In case of success the number of bytes received.
> - *	    In other case, a < 0 value describing the issue.
> - */
> -static int tpm_stm_i2c_recv(struct tpm_chip *chip, unsigned char *buf,
> -			    size_t count)
> -{
> -	int size = 0;
> -	int expected;
> -
> -	if (!chip)
> -		return -EBUSY;
> -
> -	if (count < TPM_HEADER_SIZE) {
> -		size = -EIO;
> -		goto out;
> -	}
> -
> -	size = recv_data(chip, buf, TPM_HEADER_SIZE);
> -	if (size < TPM_HEADER_SIZE) {
> -		dev_err(chip->pdev, "Unable to read header\n");
> -		goto out;
> -	}
> -
> -	expected = be32_to_cpu(*(__be32 *)(buf + 2));
> -	if (expected > count) {
> -		size = -EIO;
> -		goto out;
> -	}
> -
> -	size += recv_data(chip, &buf[TPM_HEADER_SIZE],
> -			expected - TPM_HEADER_SIZE);
> -	if (size < expected) {
> -		dev_err(chip->pdev, "Unable to read remainder of result\n");
> -		size = -ETIME;
> -		goto out;
> -	}
> -
> -out:
> -	chip->ops->cancel(chip);
> -	release_locality(chip);
> -	return size;
> -}
> -
> -static bool tpm_stm_i2c_req_canceled(struct tpm_chip *chip, u8 status)
> -{
> -	return (status == TPM_STS_COMMAND_READY);
> -}
> -
> -static const struct tpm_class_ops st_i2c_tpm = {
> -	.send = tpm_stm_i2c_send,
> -	.recv = tpm_stm_i2c_recv,
> -	.cancel = tpm_stm_i2c_cancel,
> -	.status = tpm_stm_i2c_status,
> -	.req_complete_mask = TPM_STS_DATA_AVAIL | TPM_STS_VALID,
> -	.req_complete_val = TPM_STS_DATA_AVAIL | TPM_STS_VALID,
> -	.req_canceled = tpm_stm_i2c_req_canceled,
> -};
> -
> -#ifdef CONFIG_OF
> -static int tpm_stm_i2c_of_request_resources(struct tpm_chip *chip)
> -{
> -	struct device_node *pp;
> -	struct tpm_stm_dev *tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip);
> -	struct i2c_client *client = tpm_dev->client;
> -	int gpio;
> -	int ret;
> -
> -	pp = client->dev.of_node;
> -	if (!pp) {
> -		dev_err(chip->pdev, "No platform data\n");
> -		return -ENODEV;
> -	}
> -
> -	/* Get GPIO from device tree */
> -	gpio = of_get_named_gpio(pp, "lpcpd-gpios", 0);
> -	if (gpio < 0) {
> -		dev_err(chip->pdev, "Failed to retrieve lpcpd-gpios from dts.\n");
> -		tpm_dev->io_lpcpd = -1;
> -		/*
> -		 * lpcpd pin is not specified. This is not an issue as
> -		 * power management can be also managed by TPM specific
> -		 * commands. So leave with a success status code.
> -		 */
> -		return 0;
> -	}
> -	/* GPIO request and configuration */
> -	ret = devm_gpio_request_one(&client->dev, gpio,
> -			GPIOF_OUT_INIT_HIGH, "TPM IO LPCPD");
> -	if (ret) {
> -		dev_err(chip->pdev, "Failed to request lpcpd pin\n");
> -		return -ENODEV;
> -	}
> -	tpm_dev->io_lpcpd = gpio;
> -
> -	return 0;
> -}
> -#else
> -static int tpm_stm_i2c_of_request_resources(struct tpm_chip *chip)
> -{
> -	return -ENODEV;
> -}
> -#endif
> -
> -static int tpm_stm_i2c_request_resources(struct i2c_client *client,
> -					 struct tpm_chip *chip)
> -{
> -	struct st33zp24_platform_data *pdata;
> -	struct tpm_stm_dev *tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip);
> -	int ret;
> -
> -	pdata = client->dev.platform_data;
> -	if (!pdata) {
> -		dev_err(chip->pdev, "No platform data\n");
> -		return -ENODEV;
> -	}
> -
> -	/* store for late use */
> -	tpm_dev->io_lpcpd = pdata->io_lpcpd;
> -
> -	if (gpio_is_valid(pdata->io_lpcpd)) {
> -		ret = devm_gpio_request_one(&client->dev,
> -				pdata->io_lpcpd, GPIOF_OUT_INIT_HIGH,
> -				"TPM IO_LPCPD");
> -		if (ret) {
> -			dev_err(chip->pdev, "%s : reset gpio_request failed\n",
> -				__FILE__);
> -			return ret;
> -		}
> -	}
> -
> -	return 0;
> -}
> -
> -/*
> - * tpm_stm_i2c_probe initialize the TPM device
> - * @param: client, the i2c_client drescription (TPM I2C description).
> - * @param: id, the i2c_device_id struct.
> - * @return: 0 in case of success.
> - *	 -1 in other case.
> - */
> -static int
> -tpm_stm_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id)
> -{
> -	int ret;
> -	u8 intmask = 0;
> -	struct tpm_chip *chip;
> -	struct st33zp24_platform_data *platform_data;
> -	struct tpm_stm_dev *tpm_dev;
> -
> -	if (!client) {
> -		pr_info("%s: i2c client is NULL. Device not accessible.\n",
> -			__func__);
> -		return -ENODEV;
> -	}
> -
> -	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
> -		dev_info(&client->dev, "client not i2c capable\n");
> -		return -ENODEV;
> -	}
> -
> -	tpm_dev = devm_kzalloc(&client->dev, sizeof(struct tpm_stm_dev),
> -			       GFP_KERNEL);
> -	if (!tpm_dev)
> -		return -ENOMEM;
> -
> -	chip = tpmm_chip_alloc(&client->dev, &st_i2c_tpm);
> -	if (IS_ERR(chip))
> -		return PTR_ERR(chip);
> -
> -	TPM_VPRIV(chip) = tpm_dev;
> -	tpm_dev->client = client;
> -
> -	platform_data = client->dev.platform_data;
> -	if (!platform_data && client->dev.of_node) {
> -		ret = tpm_stm_i2c_of_request_resources(chip);
> -		if (ret)
> -			goto _tpm_clean_answer;
> -	} else if (platform_data) {
> -		ret = tpm_stm_i2c_request_resources(client, chip);
> -		if (ret)
> -			goto _tpm_clean_answer;
> -	}
> -
> -	chip->vendor.timeout_a = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
> -	chip->vendor.timeout_b = msecs_to_jiffies(TIS_LONG_TIMEOUT);
> -	chip->vendor.timeout_c = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
> -	chip->vendor.timeout_d = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
> -
> -	chip->vendor.locality = LOCALITY0;
> -
> -	if (client->irq) {
> -		/* INTERRUPT Setup */
> -		init_waitqueue_head(&chip->vendor.read_queue);
> -		tpm_dev->intrs = 0;
> -
> -		if (request_locality(chip) != LOCALITY0) {
> -			ret = -ENODEV;
> -			goto _tpm_clean_answer;
> -		}
> -
> -		clear_interruption(tpm_dev);
> -		ret = devm_request_irq(&client->dev, client->irq,
> -				tpm_ioserirq_handler,
> -				IRQF_TRIGGER_HIGH,
> -				"TPM SERIRQ management", chip);
> -		if (ret < 0) {
> -			dev_err(chip->pdev, "TPM SERIRQ signals %d not available\n",
> -				client->irq);
> -			goto _tpm_clean_answer;
> -		}
> -
> -		intmask |= TPM_INTF_CMD_READY_INT
> -			|  TPM_INTF_STS_VALID_INT
> -			|  TPM_INTF_DATA_AVAIL_INT;
> -
> -		ret = I2C_WRITE_DATA(tpm_dev, TPM_INT_ENABLE, &intmask, 1);
> -		if (ret < 0)
> -			goto _tpm_clean_answer;
> -
> -		intmask = TPM_GLOBAL_INT_ENABLE;
> -		ret = I2C_WRITE_DATA(tpm_dev, (TPM_INT_ENABLE + 3),
> -				     &intmask, 1);
> -		if (ret < 0)
> -			goto _tpm_clean_answer;
> -
> -		chip->vendor.irq = client->irq;
> -
> -		disable_irq_nosync(chip->vendor.irq);
> -
> -		tpm_gen_interrupt(chip);
> -	}
> -
> -	tpm_get_timeouts(chip);
> -	tpm_do_selftest(chip);
> -
> -	return tpm_chip_register(chip);
> -_tpm_clean_answer:
> -	dev_info(chip->pdev, "TPM I2C initialisation fail\n");
> -	return ret;
> -}
> -
> -/*
> - * tpm_stm_i2c_remove remove the TPM device
> - * @param: client, the i2c_client description (TPM I2C description).
> - * @return: 0 in case of success.
> - */
> -static int tpm_stm_i2c_remove(struct i2c_client *client)
> -{
> -	struct tpm_chip *chip =
> -		(struct tpm_chip *) i2c_get_clientdata(client);
> -
> -	if (chip)
> -		tpm_chip_unregister(chip);
> -
> -	return 0;
> -}
> -
> -#ifdef CONFIG_PM_SLEEP
> -/*
> - * tpm_stm_i2c_pm_suspend suspend the TPM device
> - * @param: client, the i2c_client drescription (TPM I2C description).
> - * @param: mesg, the power management message.
> - * @return: 0 in case of success.
> - */
> -static int tpm_stm_i2c_pm_suspend(struct device *dev)
> -{
> -	struct tpm_chip *chip = dev_get_drvdata(dev);
> -	struct tpm_stm_dev *tpm_dev;
> -	int ret = 0;
> -
> -	tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip);
> -
> -	if (gpio_is_valid(tpm_dev->io_lpcpd))
> -		gpio_set_value(tpm_dev->io_lpcpd, 0);
> -	else
> -		ret = tpm_pm_suspend(dev);
> -
> -	return ret;
> -} /* tpm_stm_i2c_suspend() */
> -
> -/*
> - * tpm_stm_i2c_pm_resume resume the TPM device
> - * @param: client, the i2c_client drescription (TPM I2C description).
> - * @return: 0 in case of success.
> - */
> -static int tpm_stm_i2c_pm_resume(struct device *dev)
> -{
> -	struct tpm_chip *chip = dev_get_drvdata(dev);
> -	struct tpm_stm_dev *tpm_dev;
> -	int ret = 0;
> -
> -	tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip);
> -
> -	if (gpio_is_valid(tpm_dev->io_lpcpd)) {
> -		gpio_set_value(tpm_dev->io_lpcpd, 1);
> -		ret = wait_for_stat(chip,
> -				TPM_STS_VALID, chip->vendor.timeout_b,
> -				&chip->vendor.read_queue, false);
> -	} else {
> -		ret = tpm_pm_resume(dev);
> -		if (!ret)
> -			tpm_do_selftest(chip);
> -	}
> -	return ret;
> -} /* tpm_stm_i2c_pm_resume() */
> -#endif
> -
> -static const struct i2c_device_id tpm_stm_i2c_id[] = {
> -	{TPM_ST33_I2C, 0},
> -	{}
> -};
> -MODULE_DEVICE_TABLE(i2c, tpm_stm_i2c_id);
> -
> -#ifdef CONFIG_OF
> -static const struct of_device_id of_st33zp24_i2c_match[] = {
> -	{ .compatible = "st,st33zp24-i2c", },
> -	{}
> -};
> -MODULE_DEVICE_TABLE(of, of_st33zp24_i2c_match);
> -#endif
> -
> -static SIMPLE_DEV_PM_OPS(tpm_stm_i2c_ops, tpm_stm_i2c_pm_suspend,
> -			 tpm_stm_i2c_pm_resume);
> -
> -static struct i2c_driver tpm_stm_i2c_driver = {
> -	.driver = {
> -		.owner = THIS_MODULE,
> -		.name = TPM_ST33_I2C,
> -		.pm = &tpm_stm_i2c_ops,
> -		.of_match_table = of_match_ptr(of_st33zp24_i2c_match),
> -	},
> -	.probe = tpm_stm_i2c_probe,
> -	.remove = tpm_stm_i2c_remove,
> -	.id_table = tpm_stm_i2c_id
> -};
> -
> -module_i2c_driver(tpm_stm_i2c_driver);
> -
> -MODULE_AUTHOR("Christophe Ricard (tpmsupport-qxv4g6HH51o@public.gmane.org)");
> -MODULE_DESCRIPTION("STM TPM I2C ST33 Driver");
> -MODULE_VERSION("1.2.1");
> -MODULE_LICENSE("GPL");
> diff --git a/include/linux/platform_data/st33zp24.h b/include/linux/platform_data/st33zp24.h
> new file mode 100644
> index 0000000..817dfdb
> --- /dev/null
> +++ b/include/linux/platform_data/st33zp24.h
> @@ -0,0 +1,28 @@
> +/*
> + * STMicroelectronics TPM Linux driver for TPM 1.2 ST33ZP24
> + * Copyright (C) 2009 - 2015  STMicroelectronics
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, see <http://www.gnu.org/licenses/>.
> + */
> +#ifndef __ST33ZP24_H__
> +#define __ST33ZP24_H__
> +
> +#define TPM_ST33_I2C			"st33zp24-i2c"
> +#define TPM_ST33_SPI			"st33zp24-spi"
> +
> +struct st33zp24_platform_data {
> +	int io_lpcpd;
> +};
> +
> +#endif /* __ST33ZP24_H__ */
> diff --git a/include/linux/platform_data/tpm_stm_st33.h b/include/linux/platform_data/tpm_stm_st33.h
> deleted file mode 100644
> index ff75310..0000000
> --- a/include/linux/platform_data/tpm_stm_st33.h
> +++ /dev/null
> @@ -1,39 +0,0 @@
> -/*
> - * STMicroelectronics TPM I2C Linux driver for TPM ST33ZP24
> - * Copyright (C) 2009, 2010  STMicroelectronics
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> - * the Free Software Foundation; either version 2 of the License, or
> - * (at your option) any later version.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, see <http://www.gnu.org/licenses/>.
> - *
> - * STMicroelectronics version 1.2.0, Copyright (C) 2010
> - * STMicroelectronics comes with ABSOLUTELY NO WARRANTY.
> - * This is free software, and you are welcome to redistribute it
> - * under certain conditions.
> - *
> - * @Author: Christophe RICARD tpmsupport-qxv4g6HH51o@public.gmane.org
> - *
> - * @File: stm_st33_tpm.h
> - *
> - * @Date: 09/15/2010
> - */
> -#ifndef __STM_ST33_TPM_H__
> -#define __STM_ST33_TPM_H__
> -
> -#define TPM_ST33_I2C			"st33zp24-i2c"
> -#define TPM_ST33_SPI			"st33zp24-spi"
> -
> -struct st33zp24_platform_data {
> -	int io_lpcpd;
> -};
> -
> -#endif /* __STM_ST33_TPM_H__ */
> -- 
> 2.1.0

/Jarkko
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v5 3/4] tpm/st33zp24/spi: Add st33zp24 spi phy

[Christophe Ricard]

st33zp24 TIS 1.2 support also SPI. It is using a proprietary protocol to
transport TIS data.

Reviewed-by: Jason Gunthorpe <jason.gunthorpe-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>
Signed-off-by: Christophe Ricard <christophe-h.ricard-qxv4g6HH51o@public.gmane.org>
---
 drivers/char/tpm/st33zp24/Kconfig    |  10 +
 drivers/char/tpm/st33zp24/Makefile   |   3 +
 drivers/char/tpm/st33zp24/i2c.c      |   2 -
 drivers/char/tpm/st33zp24/spi.c      | 386 +++++++++++++++++++++++++++++++++++
 drivers/char/tpm/st33zp24/st33zp24.h |   3 +
 5 files changed, 402 insertions(+), 2 deletions(-)
 create mode 100644 drivers/char/tpm/st33zp24/spi.c

diff --git a/drivers/char/tpm/st33zp24/Kconfig b/drivers/char/tpm/st33zp24/Kconfig
index 51dcef5..09cb7278 100644
--- a/drivers/char/tpm/st33zp24/Kconfig
+++ b/drivers/char/tpm/st33zp24/Kconfig
@@ -18,3 +18,13 @@ config TCG_TIS_ST33ZP24_I2C
 	  ST33ZP24 with i2c interface.
 	  To compile this driver as a module, choose M here; the module will be
 	  called tpm_st33zp24_i2c.
+
+config TCG_TIS_ST33ZP24_SPI
+	tristate "TPM 1.2 ST33ZP24 SPI support"
+	depends on TCG_TIS_ST33ZP24
+	depends on SPI
+	---help---
+	  This module adds support for the STMicroelectronics TPM security chip
+	  ST33ZP24 with spi interface.
+	  To compile this driver as a module, choose M here; the module will be
+	  called tpm_st33zp24_spi.
diff --git a/drivers/char/tpm/st33zp24/Makefile b/drivers/char/tpm/st33zp24/Makefile
index 414497f..74a722e 100644
--- a/drivers/char/tpm/st33zp24/Makefile
+++ b/drivers/char/tpm/st33zp24/Makefile
@@ -7,3 +7,6 @@ obj-$(CONFIG_TCG_TIS_ST33ZP24) += tpm_st33zp24.o
 
 tpm_st33zp24_i2c-objs = i2c.o
 obj-$(CONFIG_TCG_TIS_ST33ZP24_I2C) += tpm_st33zp24_i2c.o
+
+tpm_st33zp24_spi-objs = spi.o
+obj-$(CONFIG_TCG_TIS_ST33ZP24_SPI) += tpm_st33zp24_spi.o
diff --git a/drivers/char/tpm/st33zp24/i2c.c b/drivers/char/tpm/st33zp24/i2c.c
index 95e3091..ad1ee18 100644
--- a/drivers/char/tpm/st33zp24/i2c.c
+++ b/drivers/char/tpm/st33zp24/i2c.c
@@ -27,8 +27,6 @@
 #include "st33zp24.h"
 
 #define TPM_DUMMY_BYTE			0xAA
-#define TPM_WRITE_DIRECTION		0x80
-#define TPM_BUFSIZE			2048
 
 struct st33zp24_i2c_phy {
 	struct i2c_client *client;
diff --git a/drivers/char/tpm/st33zp24/spi.c b/drivers/char/tpm/st33zp24/spi.c
new file mode 100644
index 0000000..b9ef57c
--- /dev/null
+++ b/drivers/char/tpm/st33zp24/spi.c
@@ -0,0 +1,386 @@
+/*
+ * STMicroelectronics TPM SPI Linux driver for TPM ST33ZP24
+ * Copyright (C) 2009 - 2015  STMicroelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+#include <linux/gpio.h>
+#include <linux/of_irq.h>
+#include <linux/of_gpio.h>
+#include <linux/tpm.h>
+#include <linux/platform_data/st33zp24.h>
+
+#include "st33zp24.h"
+
+#define TPM_DATA_FIFO           0x24
+#define TPM_INTF_CAPABILITY     0x14
+
+#define TPM_DUMMY_BYTE		0x00
+
+#define MAX_SPI_LATENCY		15
+#define LOCALITY0		0
+
+#define ST33ZP24_OK					0x5A
+#define ST33ZP24_UNDEFINED_ERR				0x80
+#define ST33ZP24_BADLOCALITY				0x81
+#define ST33ZP24_TISREGISTER_UKNOWN			0x82
+#define ST33ZP24_LOCALITY_NOT_ACTIVATED			0x83
+#define ST33ZP24_HASH_END_BEFORE_HASH_START		0x84
+#define ST33ZP24_BAD_COMMAND_ORDER			0x85
+#define ST33ZP24_INCORECT_RECEIVED_LENGTH		0x86
+#define ST33ZP24_TPM_FIFO_OVERFLOW			0x89
+#define ST33ZP24_UNEXPECTED_READ_FIFO			0x8A
+#define ST33ZP24_UNEXPECTED_WRITE_FIFO			0x8B
+#define ST33ZP24_CMDRDY_SET_WHEN_PROCESSING_HASH_END	0x90
+#define ST33ZP24_DUMMY_BYTES				0x00
+
+struct st33zp24_spi_phy {
+	struct spi_device *spi_device;
+	struct spi_transfer spi_xfer;
+	int io_lpcpd;
+	int latency;
+};
+
+static int st33zp24_status_to_errno(u8 code)
+{
+	switch (code) {
+	case ST33ZP24_OK:
+		return 0;
+	case ST33ZP24_UNDEFINED_ERR:
+	case ST33ZP24_BADLOCALITY:
+	case ST33ZP24_TISREGISTER_UKNOWN:
+	case ST33ZP24_LOCALITY_NOT_ACTIVATED:
+	case ST33ZP24_HASH_END_BEFORE_HASH_START:
+	case ST33ZP24_BAD_COMMAND_ORDER:
+	case ST33ZP24_UNEXPECTED_READ_FIFO:
+	case ST33ZP24_UNEXPECTED_WRITE_FIFO:
+	case ST33ZP24_CMDRDY_SET_WHEN_PROCESSING_HASH_END:
+		return -EPROTO;
+	case ST33ZP24_INCORECT_RECEIVED_LENGTH:
+	case ST33ZP24_TPM_FIFO_OVERFLOW:
+		return -EMSGSIZE;
+	case ST33ZP24_DUMMY_BYTES:
+	default:
+		return -ENOSYS;
+	}
+}
+
+/*
+ * st33zp24_spi_send
+ * Send byte to the TIS register according to the ST33ZP24 SPI protocol.
+ * @param: phy_id, the phy description
+ * @param: tpm_register, the tpm tis register where the data should be written
+ * @param: tpm_data, the tpm_data to write inside the tpm_register
+ * @param: tpm_size, The length of the data
+ * @return: should be zero if success else a negative error code.
+ */
+static int st33zp24_spi_send(void *phy_id, u8 tpm_register, u8 *tpm_data,
+			     int tpm_size)
+{
+	u8 data = 0;
+	int total_length = 0, nbr_dummy_bytes = 0, ret = 0;
+	struct st33zp24_spi_phy *phy = phy_id;
+	struct spi_device *dev = phy->spi_device;
+	u8 *tx_buf = (u8 *)phy->spi_xfer.tx_buf;
+	u8 *rx_buf = phy->spi_xfer.rx_buf;
+
+	/* Pre-Header */
+	data = TPM_WRITE_DIRECTION | LOCALITY0;
+	memcpy(tx_buf + total_length, &data, sizeof(data));
+	total_length++;
+	data = tpm_register;
+	memcpy(tx_buf + total_length, &data, sizeof(data));
+	total_length++;
+
+	if (tpm_size > 0 && tpm_register == TPM_DATA_FIFO) {
+		tx_buf[total_length++] = tpm_size >> 8;
+		tx_buf[total_length++] = tpm_size;
+	}
+
+	memcpy(&tx_buf[total_length], tpm_data, tpm_size);
+	total_length += tpm_size;
+
+	nbr_dummy_bytes = phy->latency;
+	memset(&tx_buf[total_length], TPM_DUMMY_BYTE, nbr_dummy_bytes);
+
+	phy->spi_xfer.len = total_length + nbr_dummy_bytes;
+
+	ret = spi_sync_transfer(dev, &phy->spi_xfer, 1);
+
+	if (ret == 0)
+		ret = rx_buf[total_length + nbr_dummy_bytes - 1];
+
+	return st33zp24_status_to_errno(ret);
+} /* st33zp24_spi_send() */
+
+/*
+ * read8_recv
+ * Recv byte from the TIS register according to the ST33ZP24 SPI protocol.
+ * @param: phy_id, the phy description
+ * @param: tpm_register, the tpm tis register where the data should be read
+ * @param: tpm_data, the TPM response
+ * @param: tpm_size, tpm TPM response size to read.
+ * @return: should be zero if success else a negative error code.
+ */
+static int read8_reg(void *phy_id, u8 tpm_register, u8 *tpm_data, int tpm_size)
+{
+	u8 data = 0;
+	int total_length = 0, nbr_dummy_bytes, ret;
+	struct st33zp24_spi_phy *phy = phy_id;
+	struct spi_device *dev = phy->spi_device;
+	u8 *tx_buf = (u8 *)phy->spi_xfer.tx_buf;
+	u8 *rx_buf = phy->spi_xfer.rx_buf;
+
+	/* Pre-Header */
+	data = LOCALITY0;
+	memcpy(tx_buf + total_length, &data, sizeof(data));
+	total_length++;
+	data = tpm_register;
+	memcpy(tx_buf + total_length, &data, sizeof(data));
+	total_length++;
+
+	nbr_dummy_bytes = phy->latency;
+	memset(&tx_buf[total_length], TPM_DUMMY_BYTE,
+	       nbr_dummy_bytes + tpm_size);
+
+	phy->spi_xfer.len = total_length + nbr_dummy_bytes + tpm_size;
+
+	/* header + status byte + size of the data + status byte */
+	ret = spi_sync_transfer(dev, &phy->spi_xfer, 1);
+	if (tpm_size > 0 && ret == 0) {
+		ret = rx_buf[total_length + nbr_dummy_bytes - 1];
+
+		memcpy(tpm_data, rx_buf + total_length + nbr_dummy_bytes,
+		       tpm_size);
+	}
+
+	return ret;
+} /* read8_reg() */
+
+/*
+ * st33zp24_spi_recv
+ * Recv byte from the TIS register according to the ST33ZP24 SPI protocol.
+ * @param: phy_id, the phy description
+ * @param: tpm_register, the tpm tis register where the data should be read
+ * @param: tpm_data, the TPM response
+ * @param: tpm_size, tpm TPM response size to read.
+ * @return: number of byte read successfully: should be one if success.
+ */
+static int st33zp24_spi_recv(void *phy_id, u8 tpm_register, u8 *tpm_data,
+			     int tpm_size)
+{
+	int ret;
+
+	ret = read8_reg(phy_id, tpm_register, tpm_data, tpm_size);
+	if (!ret)
+		return tpm_size;
+	return ret;
+} /* st33zp24_spi_recv() */
+
+static int evaluate_latency(void *phy_id)
+{
+	struct st33zp24_spi_phy *phy = phy_id;
+	int latency = 1, status = 0;
+	u8 data = 0;
+
+	while (!status && latency < MAX_SPI_LATENCY) {
+		phy->latency = latency;
+		status = read8_reg(phy_id, TPM_INTF_CAPABILITY, &data, 1);
+		latency++;
+	}
+	return latency - 1;
+} /* evaluate_latency() */
+
+static const struct st33zp24_phy_ops spi_phy_ops = {
+	.send = st33zp24_spi_send,
+	.recv = st33zp24_spi_recv,
+};
+
+#ifdef CONFIG_OF
+static int tpm_stm_spi_of_request_resources(struct st33zp24_spi_phy *phy)
+{
+	struct device_node *pp;
+	struct spi_device *dev = phy->spi_device;
+	int gpio;
+	int ret;
+
+	pp = dev->dev.of_node;
+	if (!pp) {
+		dev_err(&dev->dev, "No platform data\n");
+		return -ENODEV;
+	}
+
+	/* Get GPIO from device tree */
+	gpio = of_get_named_gpio(pp, "lpcpd-gpios", 0);
+	if (gpio < 0) {
+		dev_err(&dev->dev,
+			"Failed to retrieve lpcpd-gpios from dts.\n");
+		phy->io_lpcpd = -1;
+		/*
+		 * lpcpd pin is not specified. This is not an issue as
+		 * power management can be also managed by TPM specific
+		 * commands. So leave with a success status code.
+		 */
+		return 0;
+	}
+	/* GPIO request and configuration */
+	ret = devm_gpio_request_one(&dev->dev, gpio,
+			GPIOF_OUT_INIT_HIGH, "TPM IO LPCPD");
+	if (ret) {
+		dev_err(&dev->dev, "Failed to request lpcpd pin\n");
+		return -ENODEV;
+	}
+	phy->io_lpcpd = gpio;
+
+	return 0;
+}
+#else
+static int tpm_stm_spi_of_request_resources(struct st33zp24_spi_phy *phy)
+{
+	return -ENODEV;
+}
+#endif
+
+static int tpm_stm_spi_request_resources(struct spi_device *dev,
+					 struct st33zp24_spi_phy *phy)
+{
+	struct st33zp24_platform_data *pdata;
+	int ret;
+
+	pdata = dev->dev.platform_data;
+	if (!pdata) {
+		dev_err(&dev->dev, "No platform data\n");
+		return -ENODEV;
+	}
+
+	/* store for late use */
+	phy->io_lpcpd = pdata->io_lpcpd;
+
+	if (gpio_is_valid(pdata->io_lpcpd)) {
+		ret = devm_gpio_request_one(&dev->dev,
+				pdata->io_lpcpd, GPIOF_OUT_INIT_HIGH,
+				"TPM IO_LPCPD");
+		if (ret) {
+			dev_err(&dev->dev, "%s : reset gpio_request failed\n",
+				__FILE__);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * tpm_st33_spi_probe initialize the TPM device
+ * @param: dev, the spi_device drescription (TPM SPI description).
+ * @return: 0 in case of success.
+ *	 or a negative value describing the error.
+ */
+static int
+tpm_st33_spi_probe(struct spi_device *dev)
+{
+	int ret;
+	struct st33zp24_platform_data *pdata;
+	struct st33zp24_spi_phy *phy;
+
+	/* Check SPI platform functionnalities */
+	if (!dev) {
+		pr_info("%s: dev is NULL. Device is not accessible.\n",
+			__func__);
+		return -ENODEV;
+	}
+
+	phy = devm_kzalloc(&dev->dev, sizeof(struct st33zp24_spi_phy),
+			   GFP_KERNEL);
+	if (!phy)
+		return -ENOMEM;
+
+	phy->spi_device = dev;
+	pdata = dev->dev.platform_data;
+	if (!pdata && dev->dev.of_node) {
+		ret = tpm_stm_spi_of_request_resources(phy);
+		if (ret)
+			return ret;
+	} else if (pdata) {
+		ret = tpm_stm_spi_request_resources(dev, phy);
+		if (ret)
+			return ret;
+	}
+
+	/* max tpm tx buffer(TPM_BUFSIZE) + max tpm rx buffer(TPM_BUFSIZE / 2)
+	 * + MAX_SPI_LATENCY.
+	 */
+	phy->spi_xfer.tx_buf = devm_kmalloc(&dev->dev, (TPM_BUFSIZE +
+					(TPM_BUFSIZE / 2) + MAX_SPI_LATENCY),
+					GFP_KERNEL);
+	if (!phy->spi_xfer.tx_buf)
+		return -ENOMEM;
+
+	phy->spi_xfer.rx_buf = devm_kmalloc(&dev->dev, (TPM_BUFSIZE +
+					(TPM_BUFSIZE / 2) + MAX_SPI_LATENCY),
+					GFP_KERNEL);
+	if (!phy->spi_xfer.rx_buf)
+		return -ENOMEM;
+
+	phy->latency = evaluate_latency(phy);
+	if (phy->latency <= 0)
+		return -ENODEV;
+
+	return st33zp24_probe(phy, &spi_phy_ops, &dev->dev, dev->irq,
+			      phy->io_lpcpd);
+}
+
+/*
+ * tpm_st33_spi_remove remove the TPM device
+ * @param: client, the spi_device drescription (TPM SPI description).
+ * @return: 0 in case of success.
+ */
+static int tpm_st33_spi_remove(struct spi_device *dev)
+{
+	struct tpm_chip *chip = spi_get_drvdata(dev);
+
+	return st33zp24_remove(chip);
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id of_st33zp24_spi_match[] = {
+	{ .compatible = "st,st33zp24-spi", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, of_st33zp24_spi_match);
+#endif
+
+static SIMPLE_DEV_PM_OPS(st33zp24_spi_ops, st33zp24_pm_suspend,
+			 st33zp24_pm_resume);
+
+static struct spi_driver tpm_st33_spi_driver = {
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = TPM_ST33_SPI,
+		.pm = &st33zp24_spi_ops,
+		.of_match_table = of_match_ptr(of_st33zp24_spi_match),
+	},
+	.probe = tpm_st33_spi_probe,
+	.remove = tpm_st33_spi_remove,
+};
+
+module_spi_driver(tpm_st33_spi_driver);
+
+MODULE_AUTHOR("TPM support (TPMsupport-nkJGhpqTU55BDgjK7y7TUQ@public.gmane.org)");
+MODULE_DESCRIPTION("STM TPM 1.2 SPI ST33 Driver");
+MODULE_VERSION("1.3.0");
+MODULE_LICENSE("GPL");
diff --git a/drivers/char/tpm/st33zp24/st33zp24.h b/drivers/char/tpm/st33zp24/st33zp24.h
index 43ad39a..c207ceb 100644
--- a/drivers/char/tpm/st33zp24/st33zp24.h
+++ b/drivers/char/tpm/st33zp24/st33zp24.h
@@ -18,6 +18,9 @@
 #ifndef __LOCAL_ST33ZP24_H__
 #define __LOCAL_ST33ZP24_H__
 
+#define TPM_WRITE_DIRECTION             0x80
+#define TPM_BUFSIZE                     2048
+
 struct st33zp24_phy_ops {
 	int (*send)(void *phy_id, u8 tpm_register, u8 *tpm_data, int tpm_size);
 	int (*recv)(void *phy_id, u8 tpm_register, u8 *tpm_data, int tpm_size);
-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Aw: [PATCH v5 3/4] tpm/st33zp24/spi: Add st33zp24 spi phy

[Peter Huewe]

Hi Christophe,

sorry to be nitty picky but I still don't get this calculation


+ /* max tpm tx buffer(TPM_BUFSIZE) + max tpm rx buffer(TPM_BUFSIZE / 2)
+ * + MAX_SPI_LATENCY.
+ */
+ phy->spi_xfer.tx_buf = devm_kmalloc(&dev->dev, (TPM_BUFSIZE +
+ (TPM_BUFSIZE / 2) + MAX_SPI_LATENCY),
+ GFP_KERNEL);
+ if (!phy->spi_xfer.tx_buf)
+ return -ENOMEM;
+
+ phy->spi_xfer.rx_buf = devm_kmalloc(&dev->dev, (TPM_BUFSIZE +
+ (TPM_BUFSIZE / 2) + MAX_SPI_LATENCY),
+ GFP_KERNEL);
+ if (!phy->spi_xfer.rx_buf)
+ return -ENOMEM;
 

and the comment 
+ /* max tpm tx buffer(TPM_BUFSIZE) + max tpm rx buffer(TPM_BUFSIZE / 2)
+ * + MAX_SPI_LATENCY.
does not help either.



Why do you define TPM_BUFSIZE as 2048, add TPM_BUFSIZE/2 and something called MAX_SPI_LATENCY to it to use it as your buffer size?
Latency is for me something timing related.

Since you use this TPM_BUFSIZE only in these two lines I'd be happy with either
define which has this magical 2048+2014+15 
or (maybe better) add a reasonable comment describing the meaning of this strange calculation.


Thanks,
Peter
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: Aw: [PATCH v5 3/4] tpm/st33zp24/spi: Add st33zp24 spi phy

[RICARD Christophe]

Hi Peter,

A TPM command can be up to 2048 byte, A TPM response can be up to 1024 byte.
Between command and response, there are latency byte (up to 15 usually 
on st33zp24 2 are enough).

Overall when sending a command and expecting an answer we need in worst 
case:
2048 (for the TPM command) + 1024 (for the TPM answer).  We need some 
latency byte before the answer is available (max 15).
We have 2048 + 1024 + 15.

I will go for a define making the code more readable together with a 
comment.

Best Regards
Christophe
Le 28/01/2015 17:48, Peter Huewe a écrit :
> Hi Christophe,
>
> sorry to be nitty picky but I still don't get this calculation
>
>
> + /* max tpm tx buffer(TPM_BUFSIZE) + max tpm rx buffer(TPM_BUFSIZE / 2)
> + * + MAX_SPI_LATENCY.
> + */
> + phy->spi_xfer.tx_buf = devm_kmalloc(&dev->dev, (TPM_BUFSIZE +
> + (TPM_BUFSIZE / 2) + MAX_SPI_LATENCY),
> + GFP_KERNEL);
> + if (!phy->spi_xfer.tx_buf)
> + return -ENOMEM;
> +
> + phy->spi_xfer.rx_buf = devm_kmalloc(&dev->dev, (TPM_BUFSIZE +
> + (TPM_BUFSIZE / 2) + MAX_SPI_LATENCY),
> + GFP_KERNEL);
> + if (!phy->spi_xfer.rx_buf)
> + return -ENOMEM;
>   
>
> and the comment
> + /* max tpm tx buffer(TPM_BUFSIZE) + max tpm rx buffer(TPM_BUFSIZE / 2)
> + * + MAX_SPI_LATENCY.
> does not help either.
>
>
>
> Why do you define TPM_BUFSIZE as 2048, add TPM_BUFSIZE/2 and something called MAX_SPI_LATENCY to it to use it as your buffer size?
> Latency is for me something timing related.
>
> Since you use this TPM_BUFSIZE only in these two lines I'd be happy with either
> define which has this magical 2048+2014+15
> or (maybe better) add a reasonable comment describing the meaning of this strange calculation.
>
>
> Thanks,
> Peter

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: Aw: [PATCH v5 3/4] tpm/st33zp24/spi: Add st33zp24 spi phy

[Jason Gunthorpe]

On Wed, Jan 28, 2015 at 08:13:33PM +0100, RICARD Christophe wrote:
> Hi Peter,
> 
> A TPM command can be up to 2048 byte, A TPM response can be up to 1024 byte.
> Between command and response, there are latency byte (up to 15
> usually on st33zp24 2 are enough).
> 
> Overall when sending a command and expecting an answer we need in
> worst case:
> 2048 (for the TPM command) + 1024 (for the TPM answer).  We need
> some latency byte before the answer is available (max 15).
> We have 2048 + 1024 + 15.
> 
> I will go for a define making the code more readable together with a
> comment.

You can probably just make these static arrays inside your priv
structure and drop these independent allocations:

> >+ phy->spi_xfer.tx_buf = devm_kmalloc(&dev->dev, (TPM_BUFSIZE +
> >+ (TPM_BUFSIZE / 2) + MAX_SPI_LATENCY),
> >+ GFP_KERNEL);

Jason
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: Aw: [PATCH v5 3/4] tpm/st33zp24/spi: Add st33zp24 spi phy

[peterhuewe-Mmb7MZpHnFY]

On 28. Januar 2015 21:36:25 MEZ, Jason Gunthorpe <jgunthorpe-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org> wrote:
>On Wed, Jan 28, 2015 at 08:13:33PM +0100, RICARD Christophe wrote:
>> Hi Peter,
>> 
>> A TPM command can be up to 2048 byte, A TPM response can be up to
>1024 byte.
>> Between command and response, there are latency byte (up to 15
>> usually on st33zp24 2 are enough).
>> 
>> Overall when sending a command and expecting an answer we need in
>> worst case:
>> 2048 (for the TPM command) + 1024 (for the TPM answer).  We need
>> some latency byte before the answer is available (max 15).
>> We have 2048 + 1024 + 15.
>> 
>> I will go for a define making the code more readable together with a
>> comment.
>
>You can probably just make these static arrays inside your priv
>structure and drop these independent allocations:

Hmm, doesn' t spi stuff need dma'able buffers?

Peter
-- 
Sent from my mobile.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: Aw: [PATCH v5 3/4] tpm/st33zp24/spi: Add st33zp24 spi phy

[Jason Gunthorpe]

On Wed, Jan 28, 2015 at 10:49:39PM +0100, peterhuewe-Mmb7MZpHnFY@public.gmane.org wrote:

> >> I will go for a define making the code more readable together with a
> >> comment.
> >
> >You can probably just make these static arrays inside your priv
> >structure and drop these independent allocations:
> 
> Hmm, doesn' t spi stuff need dma'able buffers?

Well, the buffer allocation is already devm_kalloc, so it won't change
the properties to combine it with the devm_kalloc that creates the
priv structure.

Jason
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v5 4/4] tpm/st33zp24/dts/st33zp24-spi: Add dts documentation for st33zp24 spi phy

[Christophe Ricard]

Reviewed-by: Jason Gunthorpe <jason.gunthorpe-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>
Signed-off-by: Christophe Ricard <christophe-h.ricard-qxv4g6HH51o@public.gmane.org>
---
 .../bindings/security/tpm/st33zp24-spi.txt         | 34 ++++++++++++++++++++++
 1 file changed, 34 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt

diff --git a/Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt b/Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt
new file mode 100644
index 0000000..158b016
--- /dev/null
+++ b/Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt
@@ -0,0 +1,34 @@
+* STMicroelectronics SAS. ST33ZP24 TPM SoC
+
+Required properties:
+- compatible: Should be "st,st33zp24-spi".
+- spi-max-frequency: Maximum SPI frequency (<= 10000000).
+
+Optional ST33ZP24 Properties:
+- interrupt-parent: phandle for the interrupt gpio controller
+- interrupts: GPIO interrupt to which the chip is connected
+- lpcpd-gpios: Output GPIO pin used for ST33ZP24 power management D1/D2 state.
+If set, power must be present when the platform is going into sleep/hibernate mode.
+
+Optional SoC Specific Properties:
+- pinctrl-names: Contains only one value - "default".
+- pintctrl-0: Specifies the pin control groups used for this controller.
+
+Example (for ARM-based BeagleBoard xM with ST33ZP24 on SPI4):
+
+&mcspi4 {
+
+        status = "okay";
+
+        st33zp24@0 {
+
+                compatible = "st,st33zp24-spi";
+
+                spi-max-frequency = <10000000>;
+
+                interrupt-parent = <&gpio5>;
+                interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+
+                lpcpd-gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
+        };
+};
-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html