From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jean-Francois Moine Subject: Re: [PATCH] ARM: dts: mvebu: add ethernet to the cm-a510 board Date: Fri, 30 Jan 2015 11:31:18 +0100 Message-ID: <20150130113118.5523ed68@armhf> References: <54CB5267.5060004@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: In-Reply-To: <54CB5267.5060004@gmail.com> Sender: linux-kernel-owner@vger.kernel.org To: Sebastian Hesselbarth Cc: Rob Herring , devicetree@vger.kernel.org, Russell King - ARM Linux , linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Jason Cooper , Andrew Lunn , Gregory Clement , Gabriel Dobato List-Id: devicetree@vger.kernel.org On Fri, 30 Jan 2015 10:44:07 +0100 Sebastian Hesselbarth wrote: > I had a closer look on the Compulab website of the SoM [1] and think > that we'll have to convert it to dove-cm-a510.dtsi and the baseboard > Gabriel is using (maybe SBC-A510 [2]). Sebastian, I don't understand why the A510 contained in the cm-a510 should be different from the one of the other boards (I just noticed a second ethernet and a WiFi device - but, is the Compulab document up to date?)= =2E If it is the same, the dove.dtsi should work (and it seems to work for Gabriel). The only difference with the cm-a510 is the presence or not of the connectors. So, all the Dove devices could be enabled in the DT, and, if some room is needed in the board, the .config could be adapted removing the useless drivers and have a minimal kernel. --=20 Ken ar c'henta=C3=B1 | ** Breizh ha Linux atav! ** Jef | http://moinejf.free.fr/