From mboxrd@z Thu Jan 1 00:00:00 1970 From: Maxime Ripard Subject: Re: [PATCH v4 0/5] ARM: sun9i: Add USB host controller support for A80 Date: Sat, 7 Feb 2015 16:44:09 +0100 Message-ID: <20150207154409.GS2079@lukather> References: <1422915725-26492-1-git-send-email-wens@csie.org> Reply-To: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="R0KbGFzrRdaLlFh/" Return-path: Content-Disposition: inline In-Reply-To: <1422915725-26492-1-git-send-email-wens-jdAy2FN1RRM@public.gmane.org> List-Post: , List-Help: , List-Archive: , List-Unsubscribe: , To: Chen-Yu Tsai Cc: Rob Herring , Grant Likely , Kishon Vijay Abraham I , linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org List-Id: devicetree@vger.kernel.org --R0KbGFzrRdaLlFh/ Content-Type: text/plain; charset=UTF-8 Content-Disposition: inline On Tue, Feb 03, 2015 at 06:22:00AM +0800, Chen-Yu Tsai wrote: > Hi everyone, > > This is v4 of the sun9i A80 USB host support series. > > Changes since v3: > > - Dropped patches merged. > > - Moved reg_usb3_vbus into the optimus board dts > > - Dropped ohci1 from A80 dtsi. > > Cover letter from v3: > > This series adds USB host controller (EHCI/OHCI) support for the Allwinner > A80 SoC. The A80 has 3 pairs of host controllers and USB PHYs. The PHYs, > unlike in previous SoCs, do not have low level control registers anymore. > > As such, this series forgoes the original phy-sun4i-usb driver, and adds > a new, simpler driver for the USB PHYs. It may be possible to merge the > two, but given that work is being done on the OTG front for the earlier > SoCs, it may be better to merge them after support is complete. > > EHCI/OHCI0 corresponds to USB1 DP/DM pins; EHCI1 only has HSIC support; > EHCI2/OHCI/2 is USB2 DP/DM externally. External pins labeled USB0 are > for the USB 3.0 OTG controller. Applied 2-5. Thanks! Maxime -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com --R0KbGFzrRdaLlFh/--