[PATCH v2 0/4] add usb support for hi6220

[PATCH v2 0/4] add usb support for hi6220

[Zhangfei Gao]

v2:
address comments from Sergei and Peter
add hi6220_phy_setup(false) code

v1:
hi6220 usb controller is inherited from dwc2
add phy accordingly
support otg gadget/host

Zhangfei Gao (4):
  Documentation: dt-bindings: add dt binding info for hi6220 dwc2
  Documentation: dt-bindings: add dt binding info for hi6220
  usb: dwc2: platform: add hi6220 support
  usb: phy: add phy-hi6220-usb

 Documentation/devicetree/bindings/usb/dwc2.txt     |   1 +
 .../devicetree/bindings/usb/hi6220-usb.txt         |  49 ++++
 drivers/usb/dwc2/platform.c                        |  30 +++
 drivers/usb/phy/Kconfig                            |   9 +
 drivers/usb/phy/Makefile                           |   1 +
 drivers/usb/phy/phy-hi6220-usb.c                   | 297 +++++++++++++++++++++
 6 files changed, 387 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/hi6220-usb.txt
 create mode 100644 drivers/usb/phy/phy-hi6220-usb.c

-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 1/4] Documentation: dt-bindings: add dt binding info for hi6220 dwc2

[Zhangfei Gao]

Add necessary dwc2 binding documentation for Hisilicon soc: hi6220

Signed-off-by: Zhangfei Gao <zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
 Documentation/devicetree/bindings/usb/dwc2.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt
index fd132cb..2213682 100644
--- a/Documentation/devicetree/bindings/usb/dwc2.txt
+++ b/Documentation/devicetree/bindings/usb/dwc2.txt
@@ -4,6 +4,7 @@ Platform DesignWare HS OTG USB 2.0 controller
 Required properties:
 - compatible : One of:
   - brcm,bcm2835-usb: The DWC2 USB controller instance in the BCM2835 SoC.
+  - hisilicon,hi6220-usb: The DWC2 USB controller instance in the hi6220 SoC.
   - rockchip,rk3066-usb: The DWC2 USB controller instance in the rk3066 Soc;
   - "rockchip,rk3188-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3188 Soc;
   - "rockchip,rk3288-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3288 Soc;
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 2/4] Documentation: dt-bindings: add dt binding info for hi6220

[Zhangfei Gao]

Signed-off-by: Zhangfei Gao <zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
 .../devicetree/bindings/usb/hi6220-usb.txt         | 49 ++++++++++++++++++++++
 1 file changed, 49 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/hi6220-usb.txt

diff --git a/Documentation/devicetree/bindings/usb/hi6220-usb.txt b/Documentation/devicetree/bindings/usb/hi6220-usb.txt
new file mode 100644
index 0000000..b8278de
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/hi6220-usb.txt
@@ -0,0 +1,49 @@
+Hisilicon hi6220 SoC USB controller
+-----------------------------
+
+usb controller is inherited from dwc2, refer dwc2.txt
+-----
+
+Required properties:
+- compatible: "hisilicon,hi6220-usb"
+Refer to dwc2.txt for dwc2 usb properties
+
+
+PHY:
+-----
+
+Required properties:
+- compatible: "hisilicon,hi6220-usb-phy"
+- vcc-supply: phandle to the regulator that provides power to the PHY.
+- clocks: phandle and clock specifier of the PHY clock.
+- hisilicon,peripheral-syscon: phandle of syscon used to control peripheral.
+- hisilicon,gpio-vbus: gpio of detecting vbus.
+- hisilicon,gpio-id: gpio of detecting id.
+
+Example:
+
+	peripheral_ctrl: syscon@f7030000 {
+	        compatible = "syscon";
+	        reg = <0x0 0xf7030000 0x0 0x1000>;
+	};
+
+	usb2_phy: usbphy {
+		compatible = "hisilicon,hi6220-usb-phy";
+		vcc-supply = <&fixed_5v_hub>;
+		hisilicon,gpio-vbus = <&gpio2 6 0>;
+		hisilicon,gpio-id = <&gpio2 5 0>;
+		hisilicon,peripheral-syscon = <&peripheral_ctrl>;
+		clocks = <&clock_sys HI6220_USBOTG_HCLK>;
+	};
+
+	usb: usb@f72c0000 {
+		compatible = "hisilicon,hi6220-usb";
+		reg = <0x0 0xf72c0000 0x0 0x40000>;
+		phys = <&usb2_phy>;
+		dr_mode = "otg";
+		g-use-dma;
+		g-rx-fifo-size = <512>;
+		g-np-tx-fifo-size = <128>;
+		g-tx-fifo-size = <128>;
+		interrupts = <0 77 0x4>;
+	};
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 3/4] usb: dwc2: platform: add hi6220 support

[Zhangfei Gao]

Signed-off-by: Zhangfei Gao <zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
 drivers/usb/dwc2/platform.c | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
index ae095f0..f7c67db 100644
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -50,6 +50,35 @@
 
 static const char dwc2_driver_name[] = "dwc2";
 
+static const struct dwc2_core_params params_hi6220 = {
+	.otg_cap			= 2,	/* No HNP/SRP capable */
+	.otg_ver			= 0,	/* 1.3 */
+	.dma_enable			= 1,
+	.dma_desc_enable		= 0,
+	.speed				= 0,	/* High Speed */
+	.enable_dynamic_fifo		= 1,
+	.en_multiple_tx_fifo		= 1,
+	.host_rx_fifo_size		= 512,
+	.host_nperio_tx_fifo_size	= 512,
+	.host_perio_tx_fifo_size	= 512,
+	.max_transfer_size		= 65535,
+	.max_packet_count		= 511,
+	.host_channels			= 16,
+	.phy_type			= 1,	/* UTMI */
+	.phy_utmi_width			= 8,
+	.phy_ulpi_ddr			= 0,	/* Single */
+	.phy_ulpi_ext_vbus		= 0,
+	.i2c_enable			= 0,
+	.ulpi_fs_ls			= 0,
+	.host_support_fs_ls_low_power	= 0,
+	.host_ls_low_power_phy_clk	= 0,	/* 48 MHz */
+	.ts_dline			= 0,
+	.reload_ctl			= 0,
+	.ahbcfg				= GAHBCFG_HBSTLEN_INCR16 <<
+					  GAHBCFG_HBSTLEN_SHIFT,
+	.uframe_sched			= 0,
+};
+
 static const struct dwc2_core_params params_bcm2835 = {
 	.otg_cap			= 0,	/* HNP/SRP capable */
 	.otg_ver			= 0,	/* 1.3 */
@@ -129,6 +158,7 @@ static int dwc2_driver_remove(struct platform_device *dev)
 
 static const struct of_device_id dwc2_of_match_table[] = {
 	{ .compatible = "brcm,bcm2835-usb", .data = &params_bcm2835 },
+	{ .compatible = "hisilicon,hi6220-usb", .data = &params_hi6220 },
 	{ .compatible = "rockchip,rk3066-usb", .data = &params_rk3066 },
 	{ .compatible = "snps,dwc2", .data = NULL },
 	{ .compatible = "samsung,s3c6400-hsotg", .data = NULL},
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 4/4] usb: phy: add phy-hi6220-usb

[Zhangfei Gao]

Add usb phy controller for hi6220 platform

Signed-off-by: Zhangfei Gao <zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
 drivers/usb/phy/Kconfig          |   9 ++
 drivers/usb/phy/Makefile         |   1 +
 drivers/usb/phy/phy-hi6220-usb.c | 297 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 307 insertions(+)
 create mode 100644 drivers/usb/phy/phy-hi6220-usb.c

diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index c6d0c8e..405a3d0 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -173,6 +173,15 @@ config USB_MXS_PHY
 
 	  MXS Phy is used by some of the i.MX SoCs, for example imx23/28/6x.
 
+config USB_HI6220_PHY
+	tristate "hi6220 USB PHY support"
+	select USB_PHY
+	select MFD_SYSCON
+	help
+	  Enable this to support the HISILICON HI6220 USB PHY.
+
+	  To compile this driver as a module, choose M here.
+
 config USB_RCAR_PHY
 	tristate "Renesas R-Car USB PHY support"
 	depends on USB || USB_GADGET
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index 75f2bba..00172d3 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_SAMSUNG_USBPHY)		+= phy-samsung-usb.o
 obj-$(CONFIG_TWL6030_USB)		+= phy-twl6030-usb.o
 obj-$(CONFIG_USB_EHCI_TEGRA)		+= phy-tegra-usb.o
 obj-$(CONFIG_USB_GPIO_VBUS)		+= phy-gpio-vbus-usb.o
+obj-$(CONFIG_USB_HI6220_PHY)		+= phy-hi6220-usb.o
 obj-$(CONFIG_USB_ISP1301)		+= phy-isp1301.o
 obj-$(CONFIG_USB_MSM_OTG)		+= phy-msm-usb.o
 obj-$(CONFIG_USB_MV_OTG)		+= phy-mv-usb.o
diff --git a/drivers/usb/phy/phy-hi6220-usb.c b/drivers/usb/phy/phy-hi6220-usb.c
new file mode 100644
index 0000000..8092bca
--- /dev/null
+++ b/drivers/usb/phy/phy-hi6220-usb.c
@@ -0,0 +1,297 @@
+/*
+ * Copyright (c) 2015 Linaro Ltd.
+ * Copyright (c) 2015 Hisilicon Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
+
+#define SC_PERIPH_CTRL4			0x00c
+
+#define CTRL4_PICO_SIDDQ		BIT(6)
+#define CTRL4_PICO_OGDISABLE		BIT(8)
+#define CTRL4_PICO_VBUSVLDEXT		BIT(10)
+#define CTRL4_PICO_VBUSVLDEXTSEL	BIT(11)
+#define CTRL4_OTG_PHY_SEL		BIT(21)
+
+#define SC_PERIPH_CTRL5			0x010
+
+#define CTRL5_USBOTG_RES_SEL		BIT(3)
+#define CTRL5_PICOPHY_ACAENB		BIT(4)
+#define CTRL5_PICOPHY_BC_MODE		BIT(5)
+#define CTRL5_PICOPHY_CHRGSEL		BIT(6)
+#define CTRL5_PICOPHY_VDATSRCEND	BIT(7)
+#define CTRL5_PICOPHY_VDATDETENB	BIT(8)
+#define CTRL5_PICOPHY_DCDENB		BIT(9)
+#define CTRL5_PICOPHY_IDDIG		BIT(10)
+
+#define SC_PERIPH_CTRL8			0x018
+#define SC_PERIPH_RSTEN0		0x300
+#define SC_PERIPH_RSTDIS0		0x304
+
+#define RST0_USBOTG_BUS			BIT(4)
+#define RST0_POR_PICOPHY		BIT(5)
+#define RST0_USBOTG			BIT(6)
+#define RST0_USBOTG_32K			BIT(7)
+
+#define EYE_PATTERN_PARA		0x7053348c
+
+struct hi6220_priv {
+	struct usb_phy phy;
+	struct delayed_work work;
+	struct regmap *reg;
+	struct clk *clk;
+	struct regulator *vcc;
+	int gpio_vbus;
+	int gpio_id;
+	enum usb_otg_state state;
+};
+
+static void hi6220_start_periphrals(struct hi6220_priv *priv, bool on)
+{
+	struct usb_otg *otg = priv->phy.otg;
+
+	if (!otg->gadget)
+		return;
+
+	if (on)
+		usb_gadget_connect(otg->gadget);
+	else
+		usb_gadget_disconnect(otg->gadget);
+}
+
+static void hi6220_detect_work(struct work_struct *work)
+{
+	struct hi6220_priv *priv =
+		container_of(work, struct hi6220_priv, work.work);
+	int gpio_id, gpio_vubs;
+	enum usb_otg_state state;
+
+	if (!gpio_is_valid(priv->gpio_id) || !gpio_is_valid(priv->gpio_vbus))
+		return;
+
+	gpio_id = gpio_get_value_cansleep(priv->gpio_id);
+	gpio_vubs = gpio_get_value_cansleep(priv->gpio_vbus);
+
+	if (gpio_vubs == 0) {
+		if (gpio_id == 1)
+			state = OTG_STATE_B_PERIPHERAL;
+		else
+			state = OTG_STATE_A_HOST;
+	} else {
+		state = OTG_STATE_A_HOST;
+	}
+
+	if (priv->state != state) {
+		hi6220_start_periphrals(priv, state == OTG_STATE_B_PERIPHERAL);
+		priv->state = state;
+	}
+}
+
+static irqreturn_t hiusb_gpio_intr(int irq, void *data)
+{
+	struct hi6220_priv *priv = (struct hi6220_priv *)data;
+
+	/* add debounce time */
+	schedule_delayed_work(&priv->work, msecs_to_jiffies(100));
+	return IRQ_HANDLED;
+}
+
+static int hi6220_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget)
+{
+	otg->gadget = gadget;
+	return 0;
+}
+
+static void hi6220_phy_setup(struct hi6220_priv *priv, bool on)
+{
+	struct regmap *reg = priv->reg;
+	u32 val, mask;
+	int ret;
+
+	if (priv->reg == NULL)
+		return;
+
+	if (on) {
+		val = RST0_USBOTG_BUS | RST0_POR_PICOPHY |
+		      RST0_USBOTG | RST0_USBOTG_32K;
+		mask = val;
+		ret = regmap_update_bits(reg, SC_PERIPH_RSTDIS0, mask, val);
+		if (ret)
+			return;
+
+		ret = regmap_read(reg, SC_PERIPH_CTRL5, &val);
+		val = CTRL5_USBOTG_RES_SEL | CTRL5_PICOPHY_ACAENB;
+		mask = val | CTRL5_PICOPHY_BC_MODE;
+		ret = regmap_update_bits(reg, SC_PERIPH_CTRL5, mask, val);
+		if (ret)
+			return;
+
+		val =  CTRL4_PICO_VBUSVLDEXT | CTRL4_PICO_VBUSVLDEXTSEL |
+		       CTRL4_OTG_PHY_SEL;
+		mask = val | CTRL4_PICO_SIDDQ | CTRL4_PICO_OGDISABLE;
+		ret = regmap_update_bits(reg, SC_PERIPH_CTRL4, mask, val);
+		if (ret)
+			return;
+
+		ret = regmap_write(reg, SC_PERIPH_CTRL8, EYE_PATTERN_PARA);
+		if (ret)
+			return;
+	} else {
+		val = CTRL4_PICO_SIDDQ;
+		mask = val;
+		ret = regmap_update_bits(reg, SC_PERIPH_CTRL4, mask, val);
+		if (ret)
+			return;
+
+		ret = regmap_read(reg, SC_PERIPH_CTRL4, &val);
+
+		val = RST0_USBOTG_BUS | RST0_POR_PICOPHY |
+		      RST0_USBOTG | RST0_USBOTG_32K;
+		mask = val;
+		ret = regmap_update_bits(reg, SC_PERIPH_RSTEN0, mask, val);
+		if (ret)
+			return;
+	}
+}
+
+static int hi6220_phy_probe(struct platform_device *pdev)
+{
+	struct hi6220_priv *priv;
+	struct usb_otg *otg;
+	struct device_node *np = pdev->dev.of_node;
+	int ret, irq;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
+	if (!otg)
+		return -ENOMEM;
+
+	priv->phy.dev = &pdev->dev;
+	priv->phy.otg = otg;
+	priv->phy.label = "hi6220";
+	priv->phy.type = USB_PHY_TYPE_USB2;
+	otg->set_peripheral = hi6220_set_peripheral;
+	platform_set_drvdata(pdev, priv);
+
+	priv->gpio_vbus = of_get_named_gpio(np, "hisilicon,gpio-vbus", 0);
+	if (priv->gpio_vbus == -EPROBE_DEFER)
+		return -EPROBE_DEFER;
+	if (!gpio_is_valid(priv->gpio_vbus)) {
+		dev_err(&pdev->dev, "invalid gpio %d\n", priv->gpio_vbus);
+		return -ENODEV;
+	}
+
+	priv->gpio_id = of_get_named_gpio(np, "hisilicon,gpio-id", 0);
+	if (priv->gpio_id == -EPROBE_DEFER)
+		return -EPROBE_DEFER;
+	if (!gpio_is_valid(priv->gpio_id)) {
+		dev_err(&pdev->dev, "invalid gpio %d\n", priv->gpio_id);
+		return -ENODEV;
+	}
+
+	priv->reg = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
+					"hisilicon,peripheral-syscon");
+	if (IS_ERR(priv->reg))
+		priv->reg = NULL;
+
+	INIT_DELAYED_WORK(&priv->work, hi6220_detect_work);
+
+	ret = devm_gpio_request_one(&pdev->dev, priv->gpio_vbus,
+				    GPIOF_IN, "gpio_vbus");
+	if (ret < 0) {
+		dev_err(&pdev->dev, "gpio request failed for gpio_vbus\n");
+		return ret;
+	}
+
+	ret = devm_gpio_request_one(&pdev->dev, priv->gpio_id,
+				    GPIOF_IN, "gpio_id");
+	if (ret < 0) {
+		dev_err(&pdev->dev, "gpio request failed for gpio_id\n");
+		return ret;
+	}
+
+	priv->vcc = devm_regulator_get(&pdev->dev, "vcc");
+	if (!IS_ERR(priv->vcc)) {
+		ret = regulator_enable(priv->vcc);
+		if (ret) {
+			dev_err(&pdev->dev, "Failed to enable regulator\n");
+			return -ENODEV;
+		}
+	}
+
+	priv->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(priv->clk)) {
+		regulator_disable(priv->vcc);
+		return PTR_ERR(priv->clk);
+	}
+	clk_prepare_enable(priv->clk);
+
+	irq = gpio_to_irq(priv->gpio_vbus);
+	ret = devm_request_irq(&pdev->dev, gpio_to_irq(priv->gpio_vbus),
+			       hiusb_gpio_intr, IRQF_NO_SUSPEND |
+			       IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+			       "vbus_gpio_intr", priv);
+	if (ret) {
+		dev_err(&pdev->dev, "request gpio irq failed.\n");
+		goto err_irq;
+	}
+
+	hi6220_phy_setup(priv, true);
+	ret = usb_add_phy_dev(&priv->phy);
+	if (ret) {
+		dev_err(&pdev->dev, "Can't register transceiver\n");
+		goto err_irq;
+	}
+	schedule_delayed_work(&priv->work, 0);
+
+	return 0;
+err_irq:
+	clk_disable_unprepare(priv->clk);
+	regulator_disable(priv->vcc);
+	return ret;
+}
+
+static int hi6220_phy_remove(struct platform_device *pdev)
+{
+	struct hi6220_priv *priv = platform_get_drvdata(pdev);
+
+	hi6220_phy_setup(priv, false);
+	clk_disable_unprepare(priv->clk);
+	regulator_disable(priv->vcc);
+	return 0;
+}
+
+static const struct of_device_id hi6220_phy_of_match[] = {
+	{.compatible = "hisilicon,hi6220-usb-phy",},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, hi6220_phy_of_match);
+
+static struct platform_driver hi6220_phy_driver = {
+	.probe	= hi6220_phy_probe,
+	.remove	= hi6220_phy_remove,
+	.driver = {
+		.name	= "hi6220-usb-phy",
+		.of_match_table	= hi6220_phy_of_match,
+	}
+};
+module_platform_driver(hi6220_phy_driver);
+
+MODULE_DESCRIPTION("HISILICON HI6220 USB PHY driver");
+MODULE_ALIAS("platform:hi6220-usb-phy");
+MODULE_LICENSE("GPL");
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 4/4] usb: phy: add phy-hi6220-usb

[Peter Chen]

On Sat, Feb 07, 2015 at 12:56:06PM +0800, Zhangfei Gao wrote:
> Add usb phy controller for hi6220 platform
> 
> Signed-off-by: Zhangfei Gao <zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> ---
>  drivers/usb/phy/Kconfig          |   9 ++
>  drivers/usb/phy/Makefile         |   1 +
>  drivers/usb/phy/phy-hi6220-usb.c | 297 +++++++++++++++++++++++++++++++++++++++
>  3 files changed, 307 insertions(+)
>  create mode 100644 drivers/usb/phy/phy-hi6220-usb.c
> 
> diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
> index c6d0c8e..405a3d0 100644
> --- a/drivers/usb/phy/Kconfig
> +++ b/drivers/usb/phy/Kconfig
> @@ -173,6 +173,15 @@ config USB_MXS_PHY
>  
>  	  MXS Phy is used by some of the i.MX SoCs, for example imx23/28/6x.
>  
> +config USB_HI6220_PHY
> +	tristate "hi6220 USB PHY support"
> +	select USB_PHY
> +	select MFD_SYSCON
> +	help
> +	  Enable this to support the HISILICON HI6220 USB PHY.
> +
> +	  To compile this driver as a module, choose M here.
> +
>  config USB_RCAR_PHY
>  	tristate "Renesas R-Car USB PHY support"
>  	depends on USB || USB_GADGET
> diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
> index 75f2bba..00172d3 100644
> --- a/drivers/usb/phy/Makefile
> +++ b/drivers/usb/phy/Makefile
> @@ -18,6 +18,7 @@ obj-$(CONFIG_SAMSUNG_USBPHY)		+= phy-samsung-usb.o
>  obj-$(CONFIG_TWL6030_USB)		+= phy-twl6030-usb.o
>  obj-$(CONFIG_USB_EHCI_TEGRA)		+= phy-tegra-usb.o
>  obj-$(CONFIG_USB_GPIO_VBUS)		+= phy-gpio-vbus-usb.o
> +obj-$(CONFIG_USB_HI6220_PHY)		+= phy-hi6220-usb.o
>  obj-$(CONFIG_USB_ISP1301)		+= phy-isp1301.o
>  obj-$(CONFIG_USB_MSM_OTG)		+= phy-msm-usb.o
>  obj-$(CONFIG_USB_MV_OTG)		+= phy-mv-usb.o
> diff --git a/drivers/usb/phy/phy-hi6220-usb.c b/drivers/usb/phy/phy-hi6220-usb.c
> new file mode 100644
> index 0000000..8092bca
> --- /dev/null
> +++ b/drivers/usb/phy/phy-hi6220-usb.c
> @@ -0,0 +1,297 @@
> +/*
> + * Copyright (c) 2015 Linaro Ltd.
> + * Copyright (c) 2015 Hisilicon Limited.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/of_gpio.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/usb/gadget.h>
> +#include <linux/usb/otg.h>
> +
> +#define SC_PERIPH_CTRL4			0x00c
> +
> +#define CTRL4_PICO_SIDDQ		BIT(6)
> +#define CTRL4_PICO_OGDISABLE		BIT(8)
> +#define CTRL4_PICO_VBUSVLDEXT		BIT(10)
> +#define CTRL4_PICO_VBUSVLDEXTSEL	BIT(11)
> +#define CTRL4_OTG_PHY_SEL		BIT(21)
> +
> +#define SC_PERIPH_CTRL5			0x010
> +
> +#define CTRL5_USBOTG_RES_SEL		BIT(3)
> +#define CTRL5_PICOPHY_ACAENB		BIT(4)
> +#define CTRL5_PICOPHY_BC_MODE		BIT(5)
> +#define CTRL5_PICOPHY_CHRGSEL		BIT(6)
> +#define CTRL5_PICOPHY_VDATSRCEND	BIT(7)
> +#define CTRL5_PICOPHY_VDATDETENB	BIT(8)
> +#define CTRL5_PICOPHY_DCDENB		BIT(9)
> +#define CTRL5_PICOPHY_IDDIG		BIT(10)
> +
> +#define SC_PERIPH_CTRL8			0x018
> +#define SC_PERIPH_RSTEN0		0x300
> +#define SC_PERIPH_RSTDIS0		0x304
> +
> +#define RST0_USBOTG_BUS			BIT(4)
> +#define RST0_POR_PICOPHY		BIT(5)
> +#define RST0_USBOTG			BIT(6)
> +#define RST0_USBOTG_32K			BIT(7)
> +
> +#define EYE_PATTERN_PARA		0x7053348c
> +
> +struct hi6220_priv {
> +	struct usb_phy phy;
> +	struct delayed_work work;
> +	struct regmap *reg;
> +	struct clk *clk;
> +	struct regulator *vcc;
> +	int gpio_vbus;
> +	int gpio_id;
> +	enum usb_otg_state state;
> +};
> +
> +static void hi6220_start_periphrals(struct hi6220_priv *priv, bool on)
> +{
> +	struct usb_otg *otg = priv->phy.otg;
> +
> +	if (!otg->gadget)
> +		return;
> +
> +	if (on)
> +		usb_gadget_connect(otg->gadget);
> +	else
> +		usb_gadget_disconnect(otg->gadget);
> +}
> +
> +static void hi6220_detect_work(struct work_struct *work)
> +{
> +	struct hi6220_priv *priv =
> +		container_of(work, struct hi6220_priv, work.work);
> +	int gpio_id, gpio_vubs;

%s/gpio_vubs/gpio_vbus

> +	enum usb_otg_state state;
> +
> +	if (!gpio_is_valid(priv->gpio_id) || !gpio_is_valid(priv->gpio_vbus))
> +		return;
> +
> +	gpio_id = gpio_get_value_cansleep(priv->gpio_id);
> +	gpio_vubs = gpio_get_value_cansleep(priv->gpio_vbus);
> +
> +	if (gpio_vubs == 0) {
> +		if (gpio_id == 1)
> +			state = OTG_STATE_B_PERIPHERAL;
> +		else
> +			state = OTG_STATE_A_HOST;
> +	} else {
> +		state = OTG_STATE_A_HOST;
> +	}
> +
> +	if (priv->state != state) {
> +		hi6220_start_periphrals(priv, state == OTG_STATE_B_PERIPHERAL);
> +		priv->state = state;
> +	}
> +}
> +
> +static irqreturn_t hiusb_gpio_intr(int irq, void *data)
> +{
> +	struct hi6220_priv *priv = (struct hi6220_priv *)data;
> +
> +	/* add debounce time */
> +	schedule_delayed_work(&priv->work, msecs_to_jiffies(100));
> +	return IRQ_HANDLED;
> +}
> +
> +static int hi6220_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget)
> +{
> +	otg->gadget = gadget;
> +	return 0;
> +}
> +
> +static void hi6220_phy_setup(struct hi6220_priv *priv, bool on)
> +{
> +	struct regmap *reg = priv->reg;
> +	u32 val, mask;
> +	int ret;
> +
> +	if (priv->reg == NULL)
> +		return;
> +
> +	if (on) {
> +		val = RST0_USBOTG_BUS | RST0_POR_PICOPHY |
> +		      RST0_USBOTG | RST0_USBOTG_32K;
> +		mask = val;
> +		ret = regmap_update_bits(reg, SC_PERIPH_RSTDIS0, mask, val);
> +		if (ret)
> +			return;
> +
> +		ret = regmap_read(reg, SC_PERIPH_CTRL5, &val);
> +		val = CTRL5_USBOTG_RES_SEL | CTRL5_PICOPHY_ACAENB;
> +		mask = val | CTRL5_PICOPHY_BC_MODE;
> +		ret = regmap_update_bits(reg, SC_PERIPH_CTRL5, mask, val);
> +		if (ret)
> +			return;
> +
> +		val =  CTRL4_PICO_VBUSVLDEXT | CTRL4_PICO_VBUSVLDEXTSEL |
> +		       CTRL4_OTG_PHY_SEL;
> +		mask = val | CTRL4_PICO_SIDDQ | CTRL4_PICO_OGDISABLE;
> +		ret = regmap_update_bits(reg, SC_PERIPH_CTRL4, mask, val);
> +		if (ret)
> +			return;
> +
> +		ret = regmap_write(reg, SC_PERIPH_CTRL8, EYE_PATTERN_PARA);
> +		if (ret)
> +			return;
> +	} else {
> +		val = CTRL4_PICO_SIDDQ;
> +		mask = val;
> +		ret = regmap_update_bits(reg, SC_PERIPH_CTRL4, mask, val);
> +		if (ret)
> +			return;
> +
> +		ret = regmap_read(reg, SC_PERIPH_CTRL4, &val);
> +
> +		val = RST0_USBOTG_BUS | RST0_POR_PICOPHY |
> +		      RST0_USBOTG | RST0_USBOTG_32K;
> +		mask = val;
> +		ret = regmap_update_bits(reg, SC_PERIPH_RSTEN0, mask, val);
> +		if (ret)
> +			return;
> +	}

You have return value check for regmap API, but no error message or
return value for hi6220_phy_setup, it looks strange.

> +}
> +
> +static int hi6220_phy_probe(struct platform_device *pdev)
> +{
> +	struct hi6220_priv *priv;
> +	struct usb_otg *otg;
> +	struct device_node *np = pdev->dev.of_node;
> +	int ret, irq;
> +
> +	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
> +	if (!otg)
> +		return -ENOMEM;
> +
> +	priv->phy.dev = &pdev->dev;
> +	priv->phy.otg = otg;
> +	priv->phy.label = "hi6220";
> +	priv->phy.type = USB_PHY_TYPE_USB2;
> +	otg->set_peripheral = hi6220_set_peripheral;
> +	platform_set_drvdata(pdev, priv);
> +
> +	priv->gpio_vbus = of_get_named_gpio(np, "hisilicon,gpio-vbus", 0);
> +	if (priv->gpio_vbus == -EPROBE_DEFER)
> +		return -EPROBE_DEFER;
> +	if (!gpio_is_valid(priv->gpio_vbus)) {
> +		dev_err(&pdev->dev, "invalid gpio %d\n", priv->gpio_vbus);
> +		return -ENODEV;
> +	}
> +
> +	priv->gpio_id = of_get_named_gpio(np, "hisilicon,gpio-id", 0);
> +	if (priv->gpio_id == -EPROBE_DEFER)
> +		return -EPROBE_DEFER;
> +	if (!gpio_is_valid(priv->gpio_id)) {
> +		dev_err(&pdev->dev, "invalid gpio %d\n", priv->gpio_id);
> +		return -ENODEV;
> +	}
> +
> +	priv->reg = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
> +					"hisilicon,peripheral-syscon");
> +	if (IS_ERR(priv->reg))
> +		priv->reg = NULL;
> +

see my comments at your v1.

> +	INIT_DELAYED_WORK(&priv->work, hi6220_detect_work);
> +
> +	ret = devm_gpio_request_one(&pdev->dev, priv->gpio_vbus,
> +				    GPIOF_IN, "gpio_vbus");
> +	if (ret < 0) {
> +		dev_err(&pdev->dev, "gpio request failed for gpio_vbus\n");
> +		return ret;
> +	}
> +
> +	ret = devm_gpio_request_one(&pdev->dev, priv->gpio_id,
> +				    GPIOF_IN, "gpio_id");
> +	if (ret < 0) {
> +		dev_err(&pdev->dev, "gpio request failed for gpio_id\n");
> +		return ret;
> +	}
> +
> +	priv->vcc = devm_regulator_get(&pdev->dev, "vcc");
> +	if (!IS_ERR(priv->vcc)) {

EPROBE_DEFER?

> +		ret = regulator_enable(priv->vcc);
> +		if (ret) {
> +			dev_err(&pdev->dev, "Failed to enable regulator\n");
> +			return -ENODEV;
> +		}
> +	}
> +
> +	priv->clk = devm_clk_get(&pdev->dev, NULL);
> +	if (IS_ERR(priv->clk)) {
> +		regulator_disable(priv->vcc);
> +		return PTR_ERR(priv->clk);
> +	}
> +	clk_prepare_enable(priv->clk);
> +
> +	irq = gpio_to_irq(priv->gpio_vbus);
> +	ret = devm_request_irq(&pdev->dev, gpio_to_irq(priv->gpio_vbus),
> +			       hiusb_gpio_intr, IRQF_NO_SUSPEND |
> +			       IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
> +			       "vbus_gpio_intr", priv);
> +	if (ret) {
> +		dev_err(&pdev->dev, "request gpio irq failed.\n");
> +		goto err_irq;
> +	}
> +
> +	hi6220_phy_setup(priv, true);
> +	ret = usb_add_phy_dev(&priv->phy);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Can't register transceiver\n");
> +		goto err_irq;
> +	}
> +	schedule_delayed_work(&priv->work, 0);
> +
> +	return 0;
> +err_irq:
> +	clk_disable_unprepare(priv->clk);
> +	regulator_disable(priv->vcc);
> +	return ret;
> +}
> +
> +static int hi6220_phy_remove(struct platform_device *pdev)
> +{
> +	struct hi6220_priv *priv = platform_get_drvdata(pdev);
> +
> +	hi6220_phy_setup(priv, false);
> +	clk_disable_unprepare(priv->clk);
> +	regulator_disable(priv->vcc);
> +	return 0;
> +}
> +
> +static const struct of_device_id hi6220_phy_of_match[] = {
> +	{.compatible = "hisilicon,hi6220-usb-phy",},
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, hi6220_phy_of_match);
> +
> +static struct platform_driver hi6220_phy_driver = {
> +	.probe	= hi6220_phy_probe,
> +	.remove	= hi6220_phy_remove,
> +	.driver = {
> +		.name	= "hi6220-usb-phy",
> +		.of_match_table	= hi6220_phy_of_match,
> +	}
> +};
> +module_platform_driver(hi6220_phy_driver);
> +
> +MODULE_DESCRIPTION("HISILICON HI6220 USB PHY driver");
> +MODULE_ALIAS("platform:hi6220-usb-phy");
> +MODULE_LICENSE("GPL");
> -- 
> 1.9.1
> 

-- 

Best Regards,
Peter Chen
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 4/4] usb: phy: add phy-hi6220-usb

[zhangfei]

On 02/09/2015 10:11 AM, Peter Chen wrote:

>> +static void hi6220_detect_work(struct work_struct *work)
>> +{
>> +	struct hi6220_priv *priv =
>> +		container_of(work, struct hi6220_priv, work.work);
>> +	int gpio_id, gpio_vubs;
>
> %s/gpio_vubs/gpio_vbus

Yes, typo

>> +static void hi6220_phy_setup(struct hi6220_priv *priv, bool on)
>> +{
>> +	struct regmap *reg = priv->reg;
>> +	u32 val, mask;
>> +	int ret;
>> +
>> +	if (priv->reg == NULL)
>> +		return;
>> +
>> +	if (on) {
>> +		val = RST0_USBOTG_BUS | RST0_POR_PICOPHY |
>> +		      RST0_USBOTG | RST0_USBOTG_32K;
>> +		mask = val;
>> +		ret = regmap_update_bits(reg, SC_PERIPH_RSTDIS0, mask, val);
>> +		if (ret)
>> +			return;
>> +
>> +		ret = regmap_read(reg, SC_PERIPH_CTRL5, &val);
>> +		val = CTRL5_USBOTG_RES_SEL | CTRL5_PICOPHY_ACAENB;
>> +		mask = val | CTRL5_PICOPHY_BC_MODE;
>> +		ret = regmap_update_bits(reg, SC_PERIPH_CTRL5, mask, val);
>> +		if (ret)
>> +			return;
>> +
>> +		val =  CTRL4_PICO_VBUSVLDEXT | CTRL4_PICO_VBUSVLDEXTSEL |
>> +		       CTRL4_OTG_PHY_SEL;
>> +		mask = val | CTRL4_PICO_SIDDQ | CTRL4_PICO_OGDISABLE;
>> +		ret = regmap_update_bits(reg, SC_PERIPH_CTRL4, mask, val);
>> +		if (ret)
>> +			return;
>> +
>> +		ret = regmap_write(reg, SC_PERIPH_CTRL8, EYE_PATTERN_PARA);
>> +		if (ret)
>> +			return;
>> +	} else {
>> +		val = CTRL4_PICO_SIDDQ;
>> +		mask = val;
>> +		ret = regmap_update_bits(reg, SC_PERIPH_CTRL4, mask, val);
>> +		if (ret)
>> +			return;
>> +
>> +		ret = regmap_read(reg, SC_PERIPH_CTRL4, &val);
>> +
>> +		val = RST0_USBOTG_BUS | RST0_POR_PICOPHY |
>> +		      RST0_USBOTG | RST0_USBOTG_32K;
>> +		mask = val;
>> +		ret = regmap_update_bits(reg, SC_PERIPH_RSTEN0, mask, val);
>> +		if (ret)
>> +			return;
>> +	}
>
> You have return value check for regmap API, but no error message or
> return value for hi6220_phy_setup, it looks strange.

There was dev_err(priv->dev, "failed to setup phy\n");
Then I found priv->dev is the only one place to use, so I remove this 
for simple.

>
>> +}
>> +
>> +static int hi6220_phy_probe(struct platform_device *pdev)
>> +{
>> +	struct hi6220_priv *priv;
>> +	struct usb_otg *otg;
>> +	struct device_node *np = pdev->dev.of_node;
>> +	int ret, irq;
>> +
>> +	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
>> +	if (!priv)
>> +		return -ENOMEM;
>> +
>> +	otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
>> +	if (!otg)
>> +		return -ENOMEM;
>> +
>> +	priv->phy.dev = &pdev->dev;
>> +	priv->phy.otg = otg;
>> +	priv->phy.label = "hi6220";
>> +	priv->phy.type = USB_PHY_TYPE_USB2;
>> +	otg->set_peripheral = hi6220_set_peripheral;
>> +	platform_set_drvdata(pdev, priv);
>> +
>> +	priv->gpio_vbus = of_get_named_gpio(np, "hisilicon,gpio-vbus", 0);
>> +	if (priv->gpio_vbus == -EPROBE_DEFER)
>> +		return -EPROBE_DEFER;
>> +	if (!gpio_is_valid(priv->gpio_vbus)) {
>> +		dev_err(&pdev->dev, "invalid gpio %d\n", priv->gpio_vbus);
>> +		return -ENODEV;
>> +	}
>> +
>> +	priv->gpio_id = of_get_named_gpio(np, "hisilicon,gpio-id", 0);
>> +	if (priv->gpio_id == -EPROBE_DEFER)
>> +		return -EPROBE_DEFER;
>> +	if (!gpio_is_valid(priv->gpio_id)) {
>> +		dev_err(&pdev->dev, "invalid gpio %d\n", priv->gpio_id);
>> +		return -ENODEV;
>> +	}
>> +
>> +	priv->reg = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
>> +					"hisilicon,peripheral-syscon");
>> +	if (IS_ERR(priv->reg))
>> +		priv->reg = NULL;
>> +
>
> see my comments at your v1.
As replied in v1, EPROBE_DEFER does not needed.
syscon is register far earlier.

>
>> +	INIT_DELAYED_WORK(&priv->work, hi6220_detect_work);
>> +
>> +	ret = devm_gpio_request_one(&pdev->dev, priv->gpio_vbus,
>> +				    GPIOF_IN, "gpio_vbus");
>> +	if (ret < 0) {
>> +		dev_err(&pdev->dev, "gpio request failed for gpio_vbus\n");
>> +		return ret;
>> +	}
>> +
>> +	ret = devm_gpio_request_one(&pdev->dev, priv->gpio_id,
>> +				    GPIOF_IN, "gpio_id");
>> +	if (ret < 0) {
>> +		dev_err(&pdev->dev, "gpio request failed for gpio_id\n");
>> +		return ret;
>> +	}
>> +
>> +	priv->vcc = devm_regulator_get(&pdev->dev, "vcc");
>> +	if (!IS_ERR(priv->vcc)) {
>
> EPROBE_DEFER?
No, this is not needed, since regulator is registered earlier than device.

drivers/Makefile
# regulators early, since some subsystems rely on them to initialize
obj-$(CONFIG_REGULATOR)         += regulator/

EPROBE_DEFER should be the last option we rely on.


Thanks
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 4/4] usb: phy: add phy-hi6220-usb

[Zhangfei Gao]

On 9 February 2015 at 22:26, zhangfei <zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> wrote:
>
>
> On 02/09/2015 10:11 AM, Peter Chen wrote:
>
>>> +static void hi6220_detect_work(struct work_struct *work)
>>> +{
>>> +       struct hi6220_priv *priv =
>>> +               container_of(work, struct hi6220_priv, work.work);
>>> +       int gpio_id, gpio_vubs;
>>
>>
>> %s/gpio_vubs/gpio_vbus
>
>
> Yes, typo
>
>
>>> +static void hi6220_phy_setup(struct hi6220_priv *priv, bool on)
>>> +{
>>> +       struct regmap *reg = priv->reg;
>>> +       u32 val, mask;
>>> +       int ret;
>>> +
>>> +       if (priv->reg == NULL)
>>> +               return;
>>> +
>>> +       if (on) {
>>> +               val = RST0_USBOTG_BUS | RST0_POR_PICOPHY |
>>> +                     RST0_USBOTG | RST0_USBOTG_32K;
>>> +               mask = val;
>>> +               ret = regmap_update_bits(reg, SC_PERIPH_RSTDIS0, mask,
>>> val);
>>> +               if (ret)
>>> +                       return;
>>> +
>>> +               ret = regmap_read(reg, SC_PERIPH_CTRL5, &val);
>>> +               val = CTRL5_USBOTG_RES_SEL | CTRL5_PICOPHY_ACAENB;
>>> +               mask = val | CTRL5_PICOPHY_BC_MODE;
>>> +               ret = regmap_update_bits(reg, SC_PERIPH_CTRL5, mask,
>>> val);
>>> +               if (ret)
>>> +                       return;
>>> +
>>> +               val =  CTRL4_PICO_VBUSVLDEXT | CTRL4_PICO_VBUSVLDEXTSEL |
>>> +                      CTRL4_OTG_PHY_SEL;
>>> +               mask = val | CTRL4_PICO_SIDDQ | CTRL4_PICO_OGDISABLE;
>>> +               ret = regmap_update_bits(reg, SC_PERIPH_CTRL4, mask,
>>> val);
>>> +               if (ret)
>>> +                       return;
>>> +
>>> +               ret = regmap_write(reg, SC_PERIPH_CTRL8,
>>> EYE_PATTERN_PARA);
>>> +               if (ret)
>>> +                       return;
>>> +       } else {
>>> +               val = CTRL4_PICO_SIDDQ;
>>> +               mask = val;
>>> +               ret = regmap_update_bits(reg, SC_PERIPH_CTRL4, mask,
>>> val);
>>> +               if (ret)
>>> +                       return;
>>> +
>>> +               ret = regmap_read(reg, SC_PERIPH_CTRL4, &val);
>>> +
>>> +               val = RST0_USBOTG_BUS | RST0_POR_PICOPHY |
>>> +                     RST0_USBOTG | RST0_USBOTG_32K;
>>> +               mask = val;
>>> +               ret = regmap_update_bits(reg, SC_PERIPH_RSTEN0, mask,
>>> val);
>>> +               if (ret)
>>> +                       return;
>>> +       }
>>
>>
>> You have return value check for regmap API, but no error message or
>> return value for hi6220_phy_setup, it looks strange.
>
>
> There was dev_err(priv->dev, "failed to setup phy\n");
> Then I found priv->dev is the only one place to use, so I remove this for
> simple.
>
>
>>
>>> +}
>>> +
>>> +static int hi6220_phy_probe(struct platform_device *pdev)
>>> +{
>>> +       struct hi6220_priv *priv;
>>> +       struct usb_otg *otg;
>>> +       struct device_node *np = pdev->dev.of_node;
>>> +       int ret, irq;
>>> +
>>> +       priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
>>> +       if (!priv)
>>> +               return -ENOMEM;
>>> +
>>> +       otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
>>> +       if (!otg)
>>> +               return -ENOMEM;
>>> +
>>> +       priv->phy.dev = &pdev->dev;
>>> +       priv->phy.otg = otg;
>>> +       priv->phy.label = "hi6220";
>>> +       priv->phy.type = USB_PHY_TYPE_USB2;
>>> +       otg->set_peripheral = hi6220_set_peripheral;
>>> +       platform_set_drvdata(pdev, priv);
>>> +
>>> +       priv->gpio_vbus = of_get_named_gpio(np, "hisilicon,gpio-vbus",
>>> 0);
>>> +       if (priv->gpio_vbus == -EPROBE_DEFER)
>>> +               return -EPROBE_DEFER;
>>> +       if (!gpio_is_valid(priv->gpio_vbus)) {
>>> +               dev_err(&pdev->dev, "invalid gpio %d\n",
>>> priv->gpio_vbus);
>>> +               return -ENODEV;
>>> +       }
>>> +
>>> +       priv->gpio_id = of_get_named_gpio(np, "hisilicon,gpio-id", 0);
>>> +       if (priv->gpio_id == -EPROBE_DEFER)
>>> +               return -EPROBE_DEFER;
>>> +       if (!gpio_is_valid(priv->gpio_id)) {
>>> +               dev_err(&pdev->dev, "invalid gpio %d\n", priv->gpio_id);
>>> +               return -ENODEV;
>>> +       }
>>> +
>>> +       priv->reg = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
>>> +                                       "hisilicon,peripheral-syscon");
>>> +       if (IS_ERR(priv->reg))
>>> +               priv->reg = NULL;
>>> +
>>
>>
>> see my comments at your v1.
>
> As replied in v1, EPROBE_DEFER does not needed.
> syscon is register far earlier.
>
>>
>>> +       INIT_DELAYED_WORK(&priv->work, hi6220_detect_work);
>>> +
>>> +       ret = devm_gpio_request_one(&pdev->dev, priv->gpio_vbus,
>>> +                                   GPIOF_IN, "gpio_vbus");
>>> +       if (ret < 0) {
>>> +               dev_err(&pdev->dev, "gpio request failed for
>>> gpio_vbus\n");
>>> +               return ret;
>>> +       }
>>> +
>>> +       ret = devm_gpio_request_one(&pdev->dev, priv->gpio_id,
>>> +                                   GPIOF_IN, "gpio_id");
>>> +       if (ret < 0) {
>>> +               dev_err(&pdev->dev, "gpio request failed for gpio_id\n");
>>> +               return ret;
>>> +       }
>>> +
>>> +       priv->vcc = devm_regulator_get(&pdev->dev, "vcc");
>>> +       if (!IS_ERR(priv->vcc)) {
>>
>>
>> EPROBE_DEFER?
>
> No, this is not needed, since regulator is registered earlier than device.
>
> drivers/Makefile
> # regulators early, since some subsystems rely on them to initialize
> obj-$(CONFIG_REGULATOR)         += regulator/
>

After reconsideration, EPROBE_DEFER should be added here in case of module.

Thanks
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html