From: Lukasz Majewski <l.majewski@samsung.com>
To: Guenter Roeck <linux@roeck-us.net>
Cc: Eduardo Valentin <edubezval@gmail.com>,
Kamil Debski <k.debski@samsung.com>,
Jean Delvare <jdelvare@suse.de>, Kukjin Kim <kgene@kernel.org>,
lm-sensors@lm-sensors.org,
Linux PM list <linux-pm@vger.kernel.org>,
"linux-samsung-soc@vger.kernel.org"
<linux-samsung-soc@vger.kernel.org>,
devicetree@vger.kernel.org,
Lukasz Majewski <l.majewski@majess.pl>,
Kukjin Kim <kgene.kim@samsung.com>,
linux-kernel@vger.kernel.org,
Sjoerd Simons <sjoerd.simons@collabora.co.uk>,
Abhilash Kesavan <kesavan.abhilash@gmail.com>,
Abhilash Kesavan <a.kesavan@samsung.com>
Subject: Re: [PATCH v6 6/6] hwmon: pwm-fan: Code for using PWM FAN as a cooling device
Date: Thu, 26 Feb 2015 15:40:33 +0100 [thread overview]
Message-ID: <20150226154033.301a699d@amdc2363> (raw)
In-Reply-To: <54EF29D4.7040508@roeck-us.net>
Hi Guenter,
> On 02/26/2015 05:59 AM, Lukasz Majewski wrote:
> > The PWM FAN device can now be used as a thermal cooling device.
> > Necessary infrastructure has been added in this commit.
> >
> > Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
> > Acked-by: Eduardo Valentin <edubezval@gmail.com>
> > ---
> > Changes for v2:
> > - Replace pwm_fan_cooling_states with pwm_fan_cooling_levels
> > - Update ctx->pwm_fan_state when correct data from device tree is
> > available
> > - Using therma_cdev_update() when thermal is ready for controlling
> > the fan Changes for v3:
> > - Rename patch heading
> > - pwm_fan_of_get_cooling_data() now returns -EINVAL when no
> > "cooling-levels" property defined
> > - register of cooling device only when proper cooling data is
> > present Changes for v4:
> > - None
> > Changes for v5:
> > - Check for IS_ENABLED(CONFIG_THERMAL) has been added to prevent
> > from executing thermal_* specific functions
> > Changes for v6:
> > - Adding missing ctx == NULL check in pwm_fan_get_max_state()
> > - Call to thermal_cooling_device_unregister(ctx->cdev); at
> > pwm_fan_remove()
> > - struct thermal_cooling_device *cdev; added to struct pwm_fan_ctx
> > ---
> > drivers/hwmon/pwm-fan.c | 89
> > ++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed,
> > 88 insertions(+), 1 deletion(-)
> [ ... ]
> >
> > @@ -200,6 +286,7 @@ static int pwm_fan_remove(struct
> > platform_device *pdev) {
> > struct pwm_fan_ctx *ctx = platform_get_drvdata(pdev);
> >
> > + thermal_cooling_device_unregister(ctx->cdev);
>
> Unfortunately there is still no prototype for this if CONFIG_THERMAL
> is not configured.
Yes... since Nishanth Menon's changes are now only in
linux-soc-thermal/fixes
>
> Two options: Yet another revision, or wait a week until the prototypes
> are (hopefully) available and submit a patch without the conditionals.
No problem, I will wait a bit and resend this patch set.
>
> Guenter
>
--
Best regards,
Lukasz Majewski
Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
next prev parent reply other threads:[~2015-02-26 14:40 UTC|newest]
Thread overview: 117+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-18 10:13 [PATCH 0/9] hwmon: thermal: Odroid U3: Provide support for Odroid U3 fan Lukasz Majewski
2014-12-18 10:13 ` [PATCH 1/9] thermal: Provide stub for thermal_of_cooling_device_register() function Lukasz Majewski
2014-12-18 10:13 ` [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling device Lukasz Majewski
2014-12-18 10:42 ` Sjoerd Simons
2014-12-19 15:32 ` Lukasz Majewski
2014-12-19 16:02 ` Guenter Roeck
2014-12-19 16:13 ` Lukasz Majewski
2015-01-05 10:50 ` Sjoerd Simons
[not found] ` <1420455034.15910.53.camel-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>
2015-01-14 13:56 ` Lukasz Majewski
2015-01-15 8:57 ` Sjoerd Simons
2014-12-18 14:27 ` Guenter Roeck
[not found] ` <5492E46C.3080100-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2014-12-19 16:25 ` Lukasz Majewski
2014-12-18 10:13 ` [PATCH 3/9] ARM: dts: Add pwm-fan node to the Odroid-U3 board Lukasz Majewski
2014-12-18 10:13 ` [PATCH 4/9] hwmon: thermal: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Lukasz Majewski
2014-12-18 10:13 ` [PATCH 5/9] hwmon: thermal: Extract __set_pwm() function to only modify PWM duty cycle Lukasz Majewski
2014-12-18 10:13 ` [PATCH 6/9] hwmon: thermal: Read PWM FAN configuration from device tree Lukasz Majewski
2014-12-18 10:13 ` [PATCH 7/9] hwmon: thermal: Code for using PWM FAN as a cooling device Lukasz Majewski
2014-12-18 10:13 ` [PATCH 8/9] hwmon: thermal: Provide 'default-pulse-width' property to setup FAN on boot Lukasz Majewski
2014-12-18 10:13 ` [PATCH 9/9] hwmon: thermal: dts: Disable FAN on boot on the Odroid U3 Lukasz Majewski
2014-12-22 16:27 ` [PATCH v2 0/8] hwmon: thermal: Odroid U3: Provide support for Odroid U3 fan Lukasz Majewski
2014-12-22 16:27 ` [PATCH v2 1/8] thermal: Provide stub for thermal_of_cooling_device_register() function Lukasz Majewski
2015-01-02 18:54 ` Eduardo Valentin
2015-01-02 19:03 ` Eduardo Valentin
2015-01-14 15:01 ` Lukasz Majewski
2015-01-14 18:32 ` Eduardo Valentin
2015-01-15 8:43 ` Lukasz Majewski
2014-12-22 16:27 ` [PATCH v2 2/8] thermal: Provide stub for thermal_cdev_update() function Lukasz Majewski
[not found] ` <1419265668-32283-3-git-send-email-l.majewski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2015-01-02 18:40 ` Eduardo Valentin
2015-01-14 15:07 ` Lukasz Majewski
2015-01-14 18:28 ` Eduardo Valentin
2014-12-22 16:27 ` [PATCH v2 3/8] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling device Lukasz Majewski
2015-01-02 18:51 ` Eduardo Valentin
2014-12-22 16:27 ` [PATCH v2 4/8] ARM: dts: Add pwm-fan node to the Odroid-U3 board Lukasz Majewski
2014-12-22 16:27 ` [PATCH v2 5/8] hwmon: thermal: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Lukasz Majewski
2015-01-02 18:52 ` Eduardo Valentin
2014-12-22 16:27 ` [PATCH v2 6/8] hwmon: thermal: Extract __set_pwm() function to only modify PWM duty cycle Lukasz Majewski
2014-12-29 12:52 ` Guenter Roeck
2014-12-22 16:27 ` [PATCH v2 7/8] hwmon: thermal: Read PWM FAN configuration from device tree Lukasz Majewski
2014-12-29 12:50 ` Guenter Roeck
2014-12-22 16:27 ` [PATCH v2 8/8] hwmon: thermal: Code for using PWM FAN as a cooling device Lukasz Majewski
[not found] ` <1418897591-18332-1-git-send-email-l.majewski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2015-02-06 16:59 ` [PATCH v3 0/8] hwmon: thermal: Odroid U3: Provide support for Odroid U3 fan Lukasz Majewski
2015-02-06 16:59 ` [PATCH v3 1/8] thermal: Provide stub for thermal_of_cooling_device_register() function Lukasz Majewski
2015-02-06 16:59 ` [PATCH v3 2/8] thermal: Provide stub for thermal_cdev_update() function Lukasz Majewski
2015-02-06 16:59 ` [PATCH v3 3/8] Documentation: dts: Documentation entry to explain how to use PWM FAN as a cooling device Lukasz Majewski
2015-02-06 16:59 ` [PATCH v3 4/8] ARM: dts: Add pwm-fan node to the Odroid-U3 board Lukasz Majewski
2015-02-06 16:59 ` [PATCH v3 5/8] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Lukasz Majewski
2015-02-06 16:59 ` [PATCH v3 6/8] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty cycle Lukasz Majewski
2015-02-06 18:27 ` Guenter Roeck
2015-02-08 20:52 ` Lukasz Majewski
[not found] ` <1423241948-31981-1-git-send-email-l.majewski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2015-02-06 16:59 ` [PATCH v3 7/8] hwmon: pwm-fan: Read PWM FAN configuration from device tree Lukasz Majewski
2015-02-06 18:36 ` Guenter Roeck
2015-02-08 21:36 ` Lukasz Majewski
2015-02-09 4:40 ` Guenter Roeck
2015-02-06 16:59 ` [PATCH v3 8/8] hwmon: pwm-fan: Code for using PWM FAN as a cooling device Lukasz Majewski
2015-02-18 10:07 ` [PATCH v4 0/8] hwmon: thermal: Odroid U3: Provide support for Odroid U3 fan Lukasz Majewski
2015-02-18 10:07 ` [PATCH v4 1/8] thermal: Provide stub for thermal_of_cooling_device_register() function Lukasz Majewski
2015-02-24 19:21 ` Eduardo Valentin
2015-02-25 12:26 ` Lukasz Majewski
2015-02-18 10:07 ` [PATCH v4 2/8] thermal: Provide stub for thermal_cdev_update() function Lukasz Majewski
2015-02-24 19:21 ` Eduardo Valentin
2015-02-18 10:07 ` [PATCH v4 3/8] Documentation: dts: Documentation entry to explain how to use PWM FAN as a cooling device Lukasz Majewski
2015-02-24 19:25 ` Eduardo Valentin
2015-02-18 10:07 ` [PATCH v4 4/8] ARM: dts: Add pwm-fan node to the Odroid-U3 board Lukasz Majewski
2015-02-18 13:16 ` Andreas Färber
2015-02-18 10:07 ` [PATCH v4 5/8] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Lukasz Majewski
2015-02-24 19:37 ` Eduardo Valentin
2015-02-25 13:28 ` Lukasz Majewski
2015-02-25 18:30 ` Eduardo Valentin
2015-02-18 10:07 ` [PATCH v4 6/8] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty cycle Lukasz Majewski
2015-02-18 10:07 ` [PATCH v4 7/8] hwmon: pwm-fan: Read PWM FAN configuration from device tree Lukasz Majewski
2015-02-21 0:26 ` Guenter Roeck
2015-02-23 16:13 ` Lukasz Majewski
2015-02-23 16:23 ` Guenter Roeck
2015-02-23 16:51 ` Lukasz Majewski
2015-02-23 16:59 ` Guenter Roeck
2015-02-18 10:07 ` [PATCH v4 8/8] hwmon: pwm-fan: Code for using PWM FAN as a cooling device Lukasz Majewski
2015-02-25 15:34 ` [PATCH v5 0/6] hwmon: thermal: Odroid U3: Provide support for Odroid U3 fan Lukasz Majewski
2015-02-25 15:34 ` [PATCH v5 1/6] Documentation: dts: Documentation entry to explain how to use PWM FAN as a cooling device Lukasz Majewski
2015-02-25 19:11 ` Eduardo Valentin
2015-02-25 19:13 ` Eduardo Valentin
2015-02-25 15:34 ` [PATCH v5 2/6] ARM: dts: Add pwm-fan node to the Odroid-U3 board Lukasz Majewski
2015-02-25 15:34 ` [PATCH v5 3/6] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Lukasz Majewski
2015-02-25 18:49 ` Eduardo Valentin
2015-02-25 15:34 ` [PATCH v5 4/6] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty cycle Lukasz Majewski
2015-02-25 15:34 ` [PATCH v5 5/6] hwmon: pwm-fan: Read PWM FAN configuration from device tree Lukasz Majewski
2015-02-25 15:34 ` [PATCH v5 6/6] hwmon: pwm-fan: Code for using PWM FAN as a cooling device Lukasz Majewski
2015-02-25 18:24 ` Eduardo Valentin
2015-02-25 17:18 ` [PATCH v5 0/6] hwmon: thermal: Odroid U3: Provide support for Odroid U3 fan Guenter Roeck
2015-02-25 18:29 ` Eduardo Valentin
2015-02-25 18:42 ` Guenter Roeck
2015-02-26 13:59 ` [PATCH v6 " Lukasz Majewski
2015-02-26 13:59 ` [PATCH v6 1/6] Documentation: dts: Documentation entry to explain how to use PWM FAN as a cooling device Lukasz Majewski
2015-02-26 13:59 ` [PATCH v6 2/6] ARM: dts: Add pwm-fan node to the Odroid-U3 board Lukasz Majewski
2015-02-26 13:59 ` [PATCH v6 3/6] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Lukasz Majewski
2015-02-26 13:59 ` [PATCH v6 4/6] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty cycle Lukasz Majewski
2015-02-26 13:59 ` [PATCH v6 5/6] hwmon: pwm-fan: Read PWM FAN configuration from device tree Lukasz Majewski
2015-02-26 13:59 ` [PATCH v6 6/6] hwmon: pwm-fan: Code for using PWM FAN as a cooling device Lukasz Majewski
2015-02-26 14:12 ` Guenter Roeck
2015-02-26 14:40 ` Lukasz Majewski [this message]
2015-03-04 12:03 ` [PATCH RESEND RESEND v6 0/6] hwmon: thermal: Odroid U3: Provide support for Odroid U3 fan Lukasz Majewski
2015-03-04 12:03 ` [PATCH RESEND v6 1/6] Documentation: dts: Documentation entry to explain how to use PWM FAN as a cooling device Lukasz Majewski
2015-03-04 12:03 ` [PATCH RESEND v6 2/6] ARM: dts: Add pwm-fan node to the Odroid-U3 board Lukasz Majewski
2015-03-04 12:03 ` [PATCH RESEND v6 3/6] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Lukasz Majewski
2015-03-04 12:03 ` [PATCH RESEND v6 4/6] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty cycle Lukasz Majewski
2015-03-04 12:03 ` [PATCH RESEND v6 5/6] hwmon: pwm-fan: Read PWM FAN configuration from device tree Lukasz Majewski
2015-03-04 12:03 ` [PATCH RESEND v6 6/6] hwmon: pwm-fan: Code for using PWM FAN as a cooling device Lukasz Majewski
2015-08-11 13:07 ` [PATCH RESEND v6 0/3] dts: thermal: Odroid U3: Provide support for Odroid U3 fan Lukasz Majewski
2015-08-11 13:07 ` [PATCH RESEND v6 1/3] Documentation: dts: Documentation entry to explain how to use PWM FAN as a cooling device Lukasz Majewski
2015-08-13 0:17 ` Krzysztof Kozlowski
2015-08-14 9:36 ` Kukjin Kim
2015-08-16 9:35 ` Krzysztof Kozlowski
2015-09-16 11:00 ` [PATCH RESEND v6 0/3] dts: thermal: Odroid U3: Provide support for Odroid U3 fan Thomas Pietrowski
2015-09-16 11:57 ` Krzysztof Kozlowski
2015-08-11 13:14 ` [PATCH RESEND v6 2/3] ARM: dts: Add pwm-fan node to the Odroid-U3 board Lukasz Majewski
2015-08-13 0:35 ` Krzysztof Kozlowski
2015-08-11 13:15 ` [PATCH RESEND v6 3/3] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Lukasz Majewski
2015-08-13 0:35 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150226154033.301a699d@amdc2363 \
--to=l.majewski@samsung.com \
--cc=a.kesavan@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=edubezval@gmail.com \
--cc=jdelvare@suse.de \
--cc=k.debski@samsung.com \
--cc=kesavan.abhilash@gmail.com \
--cc=kgene.kim@samsung.com \
--cc=kgene@kernel.org \
--cc=l.majewski@majess.pl \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=lm-sensors@lm-sensors.org \
--cc=sjoerd.simons@collabora.co.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).