devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lee Jones <lee.jones@linaro.org>
To: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Cc: robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com,
	galak@codeaurora.org, myungjoo.ham@samsung.com,
	cw00.choi@samsung.com, linus.walleij@linaro.org,
	gnurou@gmail.com, sameo@linux.intel.com, lgirdwood@gmail.com,
	broonie@kernel.org, rf@opensource.wolfsonmicro.com,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [RESEND PATCH 1/6] mfd: arizona: Add support for WM8280/WM8281
Date: Tue, 3 Mar 2015 16:46:28 +0000	[thread overview]
Message-ID: <20150303164628.GD32624@x1> (raw)
In-Reply-To: <1425399576-26428-1-git-send-email-ckeepax@opensource.wolfsonmicro.com>

On Tue, 03 Mar 2015, Charles Keepax wrote:

> From: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
> 
> This adds support for the Wolfson Microelectronics WM8280 and WM8281
> codecs.
> 
> Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
> Acked-by: Lee Jones <lee.jones@linaro.org>
> [ Minor fixup to remove potentially uninitialised variable. ]
> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
> ---
>  drivers/mfd/Kconfig              |    5 +++--
>  drivers/mfd/arizona-core.c       |   15 +++++++++++++--
>  drivers/mfd/arizona-i2c.c        |    2 ++
>  drivers/mfd/arizona-irq.c        |    1 +
>  drivers/mfd/arizona-spi.c        |    2 ++
>  include/linux/mfd/arizona/core.h |    1 +
>  6 files changed, 22 insertions(+), 4 deletions(-)

Applied, thanks.

Will send out pull-request once this has had time to soak in -next. 

> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 0ad88c7..b5fb03c 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -1290,10 +1290,11 @@ config MFD_WM5102
>  	  Support for Wolfson Microelectronics WM5102 low power audio SoC
>  
>  config MFD_WM5110
> -	bool "Wolfson Microelectronics WM5110"
> +	bool "Wolfson Microelectronics WM5110 and WM8280/WM8281"
>  	depends on MFD_ARIZONA
>  	help
> -	  Support for Wolfson Microelectronics WM5110 low power audio SoC
> +	  Support for Wolfson Microelectronics WM5110 and WM8280/WM8281
> +	  low power audio SoC
>  
>  config MFD_WM8997
>  	bool "Wolfson Microelectronics WM8997"
> diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
> index 09ba8f1..9f81998 100644
> --- a/drivers/mfd/arizona-core.c
> +++ b/drivers/mfd/arizona-core.c
> @@ -567,6 +567,7 @@ static int arizona_of_get_core_pdata(struct arizona *arizona)
>  const struct of_device_id arizona_of_match[] = {
>  	{ .compatible = "wlf,wm5102", .data = (void *)WM5102 },
>  	{ .compatible = "wlf,wm5110", .data = (void *)WM5110 },
> +	{ .compatible = "wlf,wm8280", .data = (void *)WM8280 },
>  	{ .compatible = "wlf,wm8997", .data = (void *)WM8997 },
>  	{},
>  };
> @@ -671,6 +672,7 @@ int arizona_dev_init(struct arizona *arizona)
>  	switch (arizona->type) {
>  	case WM5102:
>  	case WM5110:
> +	case WM8280:
>  	case WM8997:
>  		for (i = 0; i < ARRAY_SIZE(wm5102_core_supplies); i++)
>  			arizona->core_supplies[i].supply
> @@ -834,11 +836,19 @@ int arizona_dev_init(struct arizona *arizona)
>  #endif
>  #ifdef CONFIG_MFD_WM5110
>  	case 0x5110:
> -		type_name = "WM5110";
> -		if (arizona->type != WM5110) {
> +		switch (arizona->type) {
> +		case WM5110:
> +			type_name = "WM5110";
> +			break;
> +		case WM8280:
> +			type_name = "WM8280";
> +			break;
> +		default:
> +			type_name = "WM5110";
>  			dev_err(arizona->dev, "WM5110 registered as %d\n",
>  				arizona->type);
>  			arizona->type = WM5110;
> +			break;
>  		}
>  		apply_patch = wm5110_patch;
>  		break;
> @@ -1010,6 +1020,7 @@ int arizona_dev_init(struct arizona *arizona)
>  				      ARRAY_SIZE(wm5102_devs), NULL, 0, NULL);
>  		break;
>  	case WM5110:
> +	case WM8280:
>  		ret = mfd_add_devices(arizona->dev, -1, wm5110_devs,
>  				      ARRAY_SIZE(wm5110_devs), NULL, 0, NULL);
>  		break;
> diff --git a/drivers/mfd/arizona-i2c.c b/drivers/mfd/arizona-i2c.c
> index 9d4156f..ff782a5d 100644
> --- a/drivers/mfd/arizona-i2c.c
> +++ b/drivers/mfd/arizona-i2c.c
> @@ -44,6 +44,7 @@ static int arizona_i2c_probe(struct i2c_client *i2c,
>  #endif
>  #ifdef CONFIG_MFD_WM5110
>  	case WM5110:
> +	case WM8280:
>  		regmap_config = &wm5110_i2c_regmap;
>  		break;
>  #endif
> @@ -87,6 +88,7 @@ static int arizona_i2c_remove(struct i2c_client *i2c)
>  static const struct i2c_device_id arizona_i2c_id[] = {
>  	{ "wm5102", WM5102 },
>  	{ "wm5110", WM5110 },
> +	{ "wm8280", WM8280 },
>  	{ "wm8997", WM8997 },
>  	{ }
>  };
> diff --git a/drivers/mfd/arizona-irq.c b/drivers/mfd/arizona-irq.c
> index 3a3fe7c..d063b94 100644
> --- a/drivers/mfd/arizona-irq.c
> +++ b/drivers/mfd/arizona-irq.c
> @@ -211,6 +211,7 @@ int arizona_irq_init(struct arizona *arizona)
>  #endif
>  #ifdef CONFIG_MFD_WM5110
>  	case WM5110:
> +	case WM8280:
>  		aod = &wm5110_aod;
>  
>  		switch (arizona->rev) {
> diff --git a/drivers/mfd/arizona-spi.c b/drivers/mfd/arizona-spi.c
> index 8ef58bc..1e845f6 100644
> --- a/drivers/mfd/arizona-spi.c
> +++ b/drivers/mfd/arizona-spi.c
> @@ -44,6 +44,7 @@ static int arizona_spi_probe(struct spi_device *spi)
>  #endif
>  #ifdef CONFIG_MFD_WM5110
>  	case WM5110:
> +	case WM8280:
>  		regmap_config = &wm5110_spi_regmap;
>  		break;
>  #endif
> @@ -84,6 +85,7 @@ static int arizona_spi_remove(struct spi_device *spi)
>  static const struct spi_device_id arizona_spi_ids[] = {
>  	{ "wm5102", WM5102 },
>  	{ "wm5110", WM5110 },
> +	{ "wm8280", WM8280 },
>  	{ },
>  };
>  MODULE_DEVICE_TABLE(spi, arizona_spi_ids);
> diff --git a/include/linux/mfd/arizona/core.h b/include/linux/mfd/arizona/core.h
> index 910e3aa..f970105 100644
> --- a/include/linux/mfd/arizona/core.h
> +++ b/include/linux/mfd/arizona/core.h
> @@ -24,6 +24,7 @@ enum arizona_type {
>  	WM5102 = 1,
>  	WM5110 = 2,
>  	WM8997 = 3,
> +	WM8280 = 4,
>  };
>  
>  #define ARIZONA_IRQ_GP1                    0

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

  parent reply	other threads:[~2015-03-03 16:46 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-03 16:19 [RESEND PATCH 1/6] mfd: arizona: Add support for WM8280/WM8281 Charles Keepax
2015-03-03 16:19 ` [RESEND PATCH 2/6] mfd: arizona: Update binding documentation for WM8280 Charles Keepax
2015-03-03 16:46   ` Lee Jones
2015-03-03 16:19 ` [RESEND PATCH 3/6] regulator: arizona-micsupp: Add support for WM8280/WM8281 Charles Keepax
2015-03-03 16:46   ` Lee Jones
2015-03-03 16:19 ` [RESEND PATCH 4/6] gpio: arizona: " Charles Keepax
2015-03-03 16:47   ` Lee Jones
2015-03-03 16:19 ` [RESEND PATCH 5/6] extcon: " Charles Keepax
2015-03-03 16:47   ` Lee Jones
2015-03-03 16:19 ` [RESEND PATCH 6/6] ASoC: " Charles Keepax
     [not found]   ` <1425399576-26428-6-git-send-email-ckeepax-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
2015-03-03 16:47     ` Lee Jones
2015-03-03 16:46 ` Lee Jones [this message]
     [not found] ` <1425399576-26428-1-git-send-email-ckeepax-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
2015-03-12 13:36   ` [GIT PULL] Immutable branch between MFD, Extcon, GPIO and Regulator Lee Jones
  -- strict thread matches above, loose matches on Subject: below --
2015-02-10 11:18 [RESEND PATCH 0/6] Add support for the WM8280 and WM8281 Charles Keepax
2015-02-10 11:18 ` [RESEND PATCH 1/6] mfd: arizona: Add support for WM8280/WM8281 Charles Keepax
2015-01-17 15:21 [RESEND PATCH 0/6] Add support for the WM8280 and WM8281 codecs Charles Keepax
2015-01-17 15:21 ` [RESEND PATCH 1/6] mfd: arizona: Add support for WM8280/WM8281 Charles Keepax

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150303164628.GD32624@x1 \
    --to=lee.jones@linaro.org \
    --cc=broonie@kernel.org \
    --cc=ckeepax@opensource.wolfsonmicro.com \
    --cc=cw00.choi@samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=galak@codeaurora.org \
    --cc=gnurou@gmail.com \
    --cc=lgirdwood@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=myungjoo.ham@samsung.com \
    --cc=pawel.moll@arm.com \
    --cc=rf@opensource.wolfsonmicro.com \
    --cc=robh+dt@kernel.org \
    --cc=sameo@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).