From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tony Lindgren Subject: Re: [PATCH 0/2] pinctrl: dt-bindings: Fix amx3 SLEWCTRL_FAST binding Date: Fri, 6 Mar 2015 09:13:52 -0800 Message-ID: <20150306171351.GU13520@atomide.com> References: <1425085827-4514-1-git-send-email-d-gerlach@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <1425085827-4514-1-git-send-email-d-gerlach@ti.com> Sender: linux-omap-owner@vger.kernel.org To: Dave Gerlach Cc: linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org, devicetree@vger.kernel.org, Rob Herring , Mark Rutland List-Id: devicetree@vger.kernel.org * Dave Gerlach [150227 17:14]: > Currently both am33xx and am43xx have the macro for SLEWCTRL_FAST > in pinctrl dt-bindings reversed so that selecting the macro actually > sets SLEWCTRL_SLOW in the pad control registers. These patches > correct the bindings but leave the pinctrl states that use the binding > *UNMODIFIED*. Previously i2c and mdio on am33xx and i2c, mdio, and > uart on am43xx had been using this macro and selecting SLEWCTRL_FAST > while actually programming SLEWCTRL_SLOW in the pad config registers. > > Because the intended selection was SLEWCTRL_FAST the macros are > unchanged. I tested on am335x-gp-evm and am437x-gp-evm with no > difference in functionality seen. Applying both into omap-for-v4.0/fixes thanks. Tony