From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dmitry Torokhov Subject: Re: [PATCH 1/3] touchscreen: sun4i-ts: A10 (sun4i) has a different temperature curve Date: Sun, 8 Mar 2015 14:13:35 -0700 Message-ID: <20150308211335.GB23193@dtor-ws> References: <1425848022-18001-1-git-send-email-hdegoede@redhat.com> <1425848022-18001-2-git-send-email-hdegoede@redhat.com> Reply-To: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Return-path: Content-Disposition: inline In-Reply-To: <1425848022-18001-2-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> List-Post: , List-Help: , List-Archive: , List-Unsubscribe: , To: Hans de Goede Cc: Maxime Ripard , Chen-Yu Tsai , linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, devicetree , linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org, Tong Zhang , Olliver Schinagl List-Id: devicetree@vger.kernel.org On Sun, Mar 08, 2015 at 09:53:40PM +0100, Hans de Goede wrote: > Testing has revealed that the temperature in the rtp controller of the A10 > (sun4i) SoC has a different curve then on the A13 (sun5i) and later models. > > Add a new sun5i-a13-ts compatible to differentiate the newer models and > set the curve based on the compatible string. > > The new curve is still not ideal on all A10-s, that seems to have to > do with there being a large spread between different A10-s out there, > the new curve us based on callibration results on 4 completely different > models: > raw min raw max temp min temp max stepsize offset > Tong Zhang's hackberry 2402 2680 45.0 80.0 0.125 -255.3 > Hansg's Cubieboard 2207 2300 36.0 45.0 0.096 -175.8 > Olliver's lime 1 (*): 2258 2537 48.3 87.1 0.139 -265.7 > Olliver's lime 2 (*): 2222 2486 46.7 91.7 0.170 -331.0 > *) from: http://linux-sunxi.org/Temperature_Calibration > > Average all 4: 0.133 -257.0 > Average without outliers (middle 2): 0.132 -261.0 > > Since it is better to slightly overreport the temperature this patch uses > the average of all 4 as curve. > > This fixes the temperature reported on the A10 being much higher then > expected. > > Cc: Tong Zhang > Cc: Olliver Schinagl > Reported-by: Tong Zhang > Signed-off-by: Hans de Goede Applied, thank you. > --- > .../devicetree/bindings/input/touchscreen/sun4i.txt | 3 ++- > drivers/input/touchscreen/sun4i-ts.c | 16 +++++++++++++--- > 2 files changed, 15 insertions(+), 4 deletions(-) > > diff --git a/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt b/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt > index 433332d..d59d252 100644 > --- a/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt > +++ b/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt > @@ -2,7 +2,8 @@ sun4i resistive touchscreen controller > -------------------------------------- > > Required properties: > - - compatible: "allwinner,sun4i-a10-ts" or "allwinner,sun6i-a31-ts" > + - compatible: "allwinner,sun4i-a10-ts", "allwinner,sun5i-a13-ts" or > + "allwinner,sun6i-a31-ts" > - reg: mmio address range of the chip > - interrupts: interrupt to which the chip is connected > - #thermal-sensor-cells: shall be 0 > diff --git a/drivers/input/touchscreen/sun4i-ts.c b/drivers/input/touchscreen/sun4i-ts.c > index b93a28b..66ccd5a 100644 > --- a/drivers/input/touchscreen/sun4i-ts.c > +++ b/drivers/input/touchscreen/sun4i-ts.c > @@ -258,6 +258,15 @@ static int sun4i_ts_probe(struct platform_device *pdev) > /* Allwinner SDK has temperature = -271 + (value / 6) (C) */ > ts->temp_offset = 1626; > ts->temp_step = 167; > + } else if (of_device_is_compatible(np, "allwinner,sun4i-a10-ts")) { > + /* > + * The A10 temperature sensor has quite a wide spread, these > + * parameters are based on the averaging of the calibration > + * results of 4 completely different boards, with a spread of > + * temp_step from 96 - 170 and temp_offset from 1758 - 3310. > + */ > + ts->temp_offset = 2570; > + ts->temp_step = 133; > } else { > /* > * The user manuals do not contain the formula for calculating > @@ -330,10 +339,10 @@ static int sun4i_ts_probe(struct platform_device *pdev) > * finally enable tp mode. > */ > reg = STYLUS_UP_DEBOUN(5) | STYLUS_UP_DEBOUN_EN(1); > - if (of_device_is_compatible(np, "allwinner,sun4i-a10-ts")) > - reg |= TP_MODE_EN(1); > - else > + if (of_device_is_compatible(np, "allwinner,sun6i-a31-ts")) > reg |= SUN6I_TP_MODE_EN(1); > + else > + reg |= TP_MODE_EN(1); > writel(reg, ts->base + TP_CTRL1); > > /* > @@ -383,6 +392,7 @@ static int sun4i_ts_remove(struct platform_device *pdev) > > static const struct of_device_id sun4i_ts_of_match[] = { > { .compatible = "allwinner,sun4i-a10-ts", }, > + { .compatible = "allwinner,sun5i-a13-ts", }, > { .compatible = "allwinner,sun6i-a31-ts", }, > { /* sentinel */ } > }; > -- > 2.3.1 > -- Dmitry