Re: [PATCH 2/2 v2] mfd: arizona: Add DT binding documentation for DMIC reference voltages

[Lee Jones <lee.jones@linaro.org>]

On Tue, 03 Mar 2015, Charles Keepax wrote:

> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
> ---
>  Documentation/devicetree/bindings/mfd/arizona.txt |    6 ++++++
>  1 files changed, 6 insertions(+), 0 deletions(-)

Applied, thanks.

> diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt
> index bfef000..f1b9b7a 100644
> --- a/Documentation/devicetree/bindings/mfd/arizona.txt
> +++ b/Documentation/devicetree/bindings/mfd/arizona.txt
> @@ -49,6 +49,12 @@ Optional properties:
>      input singals. If values less than the number of input signals, elements
>      that has not been specifed are set to 0 by default.
>  
> +  - wlf,dmic-ref : DMIC reference voltage source for each input, can be
> +    selected from either MICVDD or one of the MICBIAS's, defines
> +    (ARIZONA_DMIC_xxxx) are provided in <dt-bindings/mfd/arizona.txt>. If
> +    present, the number of values should be less than or equal to the
> +    number of inputs, unspecified inputs will use the chip default.
> +
>    - DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if
>      they are being externally supplied. As covered in
>      Documentation/devicetree/bindings/regulator/regulator.txt

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog