From: Wolfram Sang <wsa@the-dreams.de>
To: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
Gregory Clement <gregory.clement@free-electrons.com>,
Gabriel Dobato <dobatog@gmail.com>,
Stephen Warren <swarren@wwwdotorg.org>,
linux-i2c@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 1/4] i2c: mux-pinctrl: Rework to honor disabled child nodes
Date: Wed, 18 Mar 2015 13:30:12 +0100 [thread overview]
Message-ID: <20150318123012.GA3580@katana> (raw)
In-Reply-To: <1425903665-19343-1-git-send-email-sebastian.hesselbarth@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 7819 bytes --]
On Mon, Mar 09, 2015 at 01:21:05PM +0100, Sebastian Hesselbarth wrote:
> I2C mux pinctrl driver currently determines the number of sub-busses by
> counting available pinctrl-names. Unfortunately, this requires each
> incarnation of the devicetree node with different available sub-busses
> to be rewritten.
>
> This patch reworks i2c-mux-pinctrl driver to count the number of
> available sub-nodes instead. The rework should be compatible to the old
> way of probing for sub-busses and additionally allows to disable unused
> sub-busses with standard DT property status = "disabled".
Not sure about this change. With DYNAMIC_OF these days, you can't rely
that 'disabled' stays disabled all the time. My gut feeling tells me
that people will want to use this someday.
>
> This also amends the corresponding devicetree binding documentation to
> reflect the new functionality to disable unused sub-nodes. While at it,
> also fix two references to binding documentation files that miss an "i2c-"
> prefix.
>
> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
> Tested-by: Stephen Warren <swarren@nvidia.com>
> ---
> Changelog:
>
> v2->v3:
> - remove mention of "I2C bus numbers" (Suggested by Stephen Warren)
> - require pinctrl-names property for "each child" instead of
> "each enabled child" (Suggested by Stephen Warren)
> - swap enabled/disabled child nodes (Suggested by Stephen Warren)
>
> v1->v2:
> - added a Tested-by for i2c-mux-pinctrl changes from Stepen Warren.
> - reworded i2c-mux-pinctrl devicetree doc changes
> (Suggested by Stephen Warren).
>
> Patches 2/4 - 4/4 remain unchanged.
>
> Cc: Jason Cooper <jason@lakedaemon.net>
> Cc: Andrew Lunn <andrew@lunn.ch>
> Cc: Gregory Clement <gregory.clement@free-electrons.com>
> Cc: Gabriel Dobato <dobatog@gmail.com>
> Cc: Wolfram Sang <wsa@the-dreams.de>
> Cc: Stephen Warren <swarren@wwwdotorg.org>
> Cc: linux-i2c@vger.kernel.org
> Cc: devicetree@vger.kernel.org
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-kernel@vger.kernel.org
> ---
> .../devicetree/bindings/i2c/i2c-mux-pinctrl.txt | 21 ++++---
> drivers/i2c/muxes/i2c-mux-pinctrl.c | 70 ++++++++++++++--------
> 2 files changed, 58 insertions(+), 33 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt
> index ae8af1694e95..cd94a0f64d76 100644
> --- a/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt
> +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt
> @@ -28,17 +28,18 @@ Also required are:
> * Standard pinctrl properties that specify the pin mux state for each child
> bus. See ../pinctrl/pinctrl-bindings.txt.
>
> -* Standard I2C mux properties. See mux.txt in this directory.
> +* Standard I2C mux properties. See i2c-mux.txt in this directory.
>
> -* I2C child bus nodes. See mux.txt in this directory.
> +* I2C child bus nodes. See i2c-mux.txt in this directory.
>
> -For each named state defined in the pinctrl-names property, an I2C child bus
> -will be created. I2C child bus numbers are assigned based on the index into
> -the pinctrl-names property.
> +For each enabled child node an I2C child bus will be created.
>
> -The only exception is that no bus will be created for a state named "idle". If
> -such a state is defined, it must be the last entry in pinctrl-names. For
> -example:
> +There must be a corresponding pinctrl-names entry for each child node at the
> +position of the child node's "reg" property.
> +
> +Also, there can be an idle pinctrl state defined at the end of possible pinctrl
> +states. If such a state is defined, it must be the last entry in pinctrl-names.
> +For example:
>
> pinctrl-names = "ddc", "pta", "idle" -> ddc = bus 0, pta = bus 1
> pinctrl-names = "ddc", "idle", "pta" -> Invalid ("idle" not last)
> @@ -68,10 +69,12 @@ Example:
> pinctrl-1 = <&state_i2cmux_pta>;
> pinctrl-2 = <&state_i2cmux_idle>;
>
> + /* Disabled child bus 0 */
> i2c@0 {
> reg = <0>;
> #address-cells = <1>;
> #size-cells = <0>;
> + status = "disabled";
>
> eeprom {
> compatible = "eeprom";
> @@ -79,10 +82,12 @@ Example:
> };
> };
>
> + /* Enabled child bus 1 */
> i2c@1 {
> reg = <1>;
> #address-cells = <1>;
> #size-cells = <0>;
> + status = "okay";
>
> eeprom {
> compatible = "eeprom";
> diff --git a/drivers/i2c/muxes/i2c-mux-pinctrl.c b/drivers/i2c/muxes/i2c-mux-pinctrl.c
> index b48378c4b40d..033dacfabfdf 100644
> --- a/drivers/i2c/muxes/i2c-mux-pinctrl.c
> +++ b/drivers/i2c/muxes/i2c-mux-pinctrl.c
> @@ -56,9 +56,12 @@ static int i2c_mux_pinctrl_parse_dt(struct i2c_mux_pinctrl *mux,
> struct platform_device *pdev)
> {
> struct device_node *np = pdev->dev.of_node;
> - int num_names, i, ret;
> + struct device_node *child;
> + struct property *prop;
> + int num_names, num_children, ret;
> struct device_node *adapter_np;
> struct i2c_adapter *adapter;
> + const char *state;
>
> if (!np)
> return 0;
> @@ -77,32 +80,16 @@ static int i2c_mux_pinctrl_parse_dt(struct i2c_mux_pinctrl *mux,
> return num_names;
> }
>
> - mux->pdata->pinctrl_states = devm_kzalloc(&pdev->dev,
> - sizeof(*mux->pdata->pinctrl_states) * num_names,
> - GFP_KERNEL);
> - if (!mux->pdata->pinctrl_states) {
> - dev_err(mux->dev, "Cannot allocate pinctrl_states\n");
> - return -ENOMEM;
> + num_children = of_get_available_child_count(np);
> + if (num_children < 0) {
> + dev_err(mux->dev, "Unable to count available children: %d\n",
> + num_children);
> + return num_children;
> }
>
> - for (i = 0; i < num_names; i++) {
> - ret = of_property_read_string_index(np, "pinctrl-names", i,
> - &mux->pdata->pinctrl_states[mux->pdata->bus_count]);
> - if (ret < 0) {
> - dev_err(mux->dev, "Cannot parse pinctrl-names: %d\n",
> - ret);
> - return ret;
> - }
> - if (!strcmp(mux->pdata->pinctrl_states[mux->pdata->bus_count],
> - "idle")) {
> - if (i != num_names - 1) {
> - dev_err(mux->dev, "idle state must be last\n");
> - return -EINVAL;
> - }
> - mux->pdata->pinctrl_state_idle = "idle";
> - } else {
> - mux->pdata->bus_count++;
> - }
> + if (num_names < num_children) {
> + dev_err(mux->dev, "Found less pinctrl states than children\n");
> + return -EINVAL;
> }
>
> adapter_np = of_parse_phandle(np, "i2c-parent", 0);
> @@ -118,6 +105,39 @@ static int i2c_mux_pinctrl_parse_dt(struct i2c_mux_pinctrl *mux,
> mux->pdata->parent_bus_num = i2c_adapter_id(adapter);
> put_device(&adapter->dev);
>
> + mux->pdata->pinctrl_states = devm_kzalloc(&pdev->dev,
> + sizeof(*mux->pdata->pinctrl_states) * num_children,
> + GFP_KERNEL);
> + if (!mux->pdata->pinctrl_states) {
> + dev_err(mux->dev, "Cannot allocate pinctrl_states\n");
> + return -ENOMEM;
> + }
> +
> + of_property_for_each_string(np, "pinctrl-names", prop, state)
> + if (!strcmp(state, "idle"))
> + mux->pdata->pinctrl_state_idle = "idle";
> +
> + for_each_available_child_of_node(np, child) {
> + u32 reg;
> +
> + ret = of_property_read_u32(child, "reg", ®);
> + if (ret < 0) {
> + dev_err(mux->dev, "Missing reg property for child node: %d\n",
> + ret);
> + return ret;
> + }
> +
> + ret = of_property_read_string_index(np,
> + "pinctrl-names", reg, &state);
> + if (ret < 0) {
> + dev_err(mux->dev, "Cannot parse pinctrl-names for mux %d: %d\n",
> + reg, ret);
> + return ret;
> + }
> +
> + mux->pdata->pinctrl_states[mux->pdata->bus_count++] = state;
> + }
> +
> return 0;
> }
> #else
> --
> 2.1.0
>
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
next prev parent reply other threads:[~2015-03-18 12:30 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-17 18:52 [PATCH 0/8] Add proper support for Compulab CM-A510/SBC-A510 Sebastian Hesselbarth
2015-02-17 18:52 ` [PATCH 1/8] i2c: mux-pinctrl: Rework to honor disabled child nodes Sebastian Hesselbarth
[not found] ` <1424199129-22099-2-git-send-email-sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-02-17 20:46 ` Stephen Warren
[not found] ` <54E3A8A7.8080703-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2015-02-17 21:08 ` Sebastian Hesselbarth
2015-02-17 21:15 ` Stephen Warren
2015-02-17 21:19 ` Sebastian Hesselbarth
2015-02-26 21:46 ` Stephen Warren
2015-02-17 18:52 ` [PATCH 2/8] devicetree: vendor-prefixes: Add CompuLab to known vendors Sebastian Hesselbarth
2015-02-17 19:37 ` Rob Herring
2015-02-17 18:52 ` [PATCH 7/8] ARM: dts: dove: Add internal i2c multiplexer node Sebastian Hesselbarth
[not found] ` <1424199129-22099-8-git-send-email-sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-02-23 15:07 ` Gregory CLEMENT
[not found] ` <1424199129-22099-1-git-send-email-sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-02-26 17:55 ` [PATCH 0/8] Add proper support for Compulab CM-A510/SBC-A510 Gregory CLEMENT
2015-02-26 19:39 ` Sebastian Hesselbarth
2015-02-26 20:01 ` Stephen Warren
2015-02-26 20:35 ` Sebastian Hesselbarth
2015-02-27 12:24 ` [PATCH v2 0/4] " Sebastian Hesselbarth
[not found] ` <1425039885-5137-1-git-send-email-sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-02-27 12:24 ` [PATCH v2 1/4] i2c: mux-pinctrl: Rework to honor disabled child nodes Sebastian Hesselbarth
[not found] ` <1425039885-5137-2-git-send-email-sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-03-02 20:01 ` Stephen Warren
[not found] ` <54F4C185.9080808-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2015-03-04 9:10 ` Sebastian Hesselbarth
2015-03-09 12:21 ` [PATCH v3 " Sebastian Hesselbarth
[not found] ` <1425903665-19343-1-git-send-email-sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-03-10 16:28 ` Stephen Warren
[not found] ` <54FF1BAA.3060409-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2015-03-16 20:15 ` Sebastian Hesselbarth
2015-03-18 12:30 ` Wolfram Sang [this message]
2015-03-18 13:23 ` Sebastian Hesselbarth
2015-03-18 14:00 ` Wolfram Sang
2015-03-18 23:10 ` Sebastian Hesselbarth
[not found] ` <550A05E5.3050100-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-03-19 10:09 ` Wolfram Sang
2015-03-19 10:48 ` Wolfram Sang
2015-03-19 15:47 ` Stephen Warren
[not found] ` <550AEF9D.6090307-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2015-03-19 16:02 ` Wolfram Sang
2015-03-19 16:49 ` Stephen Warren
2015-03-19 20:52 ` Sebastian Hesselbarth
2015-03-20 10:19 ` Wolfram Sang
2015-03-21 21:00 ` Wolfram Sang
2015-03-22 13:03 ` Sebastian Hesselbarth
[not found] ` <550EBDBC.9000903-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-03-23 18:32 ` Wolfram Sang
2015-03-27 21:08 ` Sebastian Hesselbarth
[not found] ` <5515C6B6.7080903-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-04-03 18:17 ` Wolfram Sang
2015-02-27 12:24 ` [PATCH v2 2/4] devicetree: vendor-prefixes: Add CompuLab to known vendors Sebastian Hesselbarth
2015-02-27 12:24 ` [PATCH v2 3/4] ARM: dts: dove: Add internal i2c multiplexer node Sebastian Hesselbarth
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150318123012.GA3580@katana \
--to=wsa@the-dreams.de \
--cc=andrew@lunn.ch \
--cc=devicetree@vger.kernel.org \
--cc=dobatog@gmail.com \
--cc=gregory.clement@free-electrons.com \
--cc=jason@lakedaemon.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sebastian.hesselbarth@gmail.com \
--cc=swarren@wwwdotorg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).