From: Eduardo Valentin <edubezval@gmail.com>
To: Nishanth Menon <nm@ti.com>
Cc: "Tony Lindgren" <tony@atomide.com>,
"Benoît Cousson" <bcousson@baylibre.com>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-omap@vger.kernel.org, Keerthy <j-keerthy@ti.com>,
"Tero Kristo" <t-kristo@ti.com>
Subject: Re: [PATCH 2/3] ARM: dts: DRA7: Add bandgap and related thermal nodes
Date: Fri, 20 Mar 2015 17:51:24 -0400 [thread overview]
Message-ID: <20150320215123.GA7346@developer.amazonguestwifi.org> (raw)
In-Reply-To: <1426880861-9266-3-git-send-email-nm@ti.com>
[-- Attachment #1: Type: text/plain, Size: 2851 bytes --]
On Fri, Mar 20, 2015 at 02:47:40PM -0500, Nishanth Menon wrote:
> From: Keerthy <j-keerthy@ti.com>
>
> Add bandgap and related thermal nodes. The patch adds 5 thermal
> sensors. Only one cooling device for mpu as of now. The sensors are
> the exact same on both dra72 and dra7.
>
> Signed-off-by: Keerthy <j-keerthy@ti.com>
> Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Eduardo Valentin <edubezval@gmail.com>
> ---
> arch/arm/boot/dts/dra7.dtsi | 12 ++++++++++++
> arch/arm/boot/dts/dra72x.dtsi | 9 +++++++++
> arch/arm/boot/dts/dra74x.dtsi | 9 +++++++++
> 3 files changed, 30 insertions(+)
>
> diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
> index eea4a54d6cb3..4b975cc377fd 100644
> --- a/arch/arm/boot/dts/dra7.dtsi
> +++ b/arch/arm/boot/dts/dra7.dtsi
> @@ -177,6 +177,18 @@
> };
> };
>
> + bandgap: bandgap@4a0021e0 {
> + reg = <0x4a0021e0 0xc
> + 0x4a00232c 0xc
> + 0x4a002380 0x2c
> + 0x4a0023C0 0x3c
> + 0x4a002564 0x8
> + 0x4a002574 0x50>;
> + compatible = "ti,dra752-bandgap";
> + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
> + #thermal-sensor-cells = <1>;
> + };
> +
> cm_core_aon: cm_core_aon@4a005000 {
> compatible = "ti,dra7-cm-core-aon";
> reg = <0x4a005000 0x2000>;
> diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi
> index e5a3d23a3df1..43bd0709bde9 100644
> --- a/arch/arm/boot/dts/dra72x.dtsi
> +++ b/arch/arm/boot/dts/dra72x.dtsi
> @@ -20,6 +20,11 @@
> device_type = "cpu";
> compatible = "arm,cortex-a15";
> reg = <0>;
> +
> + /* cooling options */
> + cooling-min-level = <0>;
> + cooling-max-level = <2>;
> + #cooling-cells = <2>; /* min followed by max */
> };
> };
>
> @@ -27,4 +32,8 @@
> compatible = "arm,cortex-a15-pmu";
> interrupts = <GIC_SPI DIRECT_IRQ(131) IRQ_TYPE_LEVEL_HIGH>;
> };
> +
> + thermal_zones: thermal-zones {
> + #include "omap5-cpu-thermal.dtsi"
> + };
> };
> diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi
> index 10173fab1a15..4f2c870836fe 100644
> --- a/arch/arm/boot/dts/dra74x.dtsi
> +++ b/arch/arm/boot/dts/dra74x.dtsi
> @@ -31,6 +31,11 @@
> clock-names = "cpu";
>
> clock-latency = <300000>; /* From omap-cpufreq driver */
> +
> + /* cooling options */
> + cooling-min-level = <0>;
> + cooling-max-level = <2>;
> + #cooling-cells = <2>; /* min followed by max */
> };
> cpu@1 {
> device_type = "cpu";
> @@ -45,6 +50,10 @@
> <GIC_SPI DIRECT_IRQ(132) IRQ_TYPE_LEVEL_HIGH>;
> };
>
> + thermal_zones: thermal-zones {
> + #include "omap5-cpu-thermal.dtsi"
> + };
> +
> ocp {
> omap_dwc3_4: omap_dwc3_4@48940000 {
> compatible = "ti,dwc3";
> --
> 1.7.9.5
>
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 473 bytes --]
next prev parent reply other threads:[~2015-03-20 21:51 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-20 19:47 [PATCH 0/3] ARM: omap5/dra7/x15: Thermal dts patches Nishanth Menon
2015-03-20 19:47 ` [PATCH 1/3] ARM: dts: OMAP5+: separate the cpu thermal zone definition from omap4 Nishanth Menon
2015-03-20 21:54 ` Eduardo Valentin
2015-03-23 10:16 ` Tero Kristo
2015-03-23 17:00 ` Nishanth Menon
[not found] ` <1426880861-9266-1-git-send-email-nm-l0cyMroinI0@public.gmane.org>
2015-03-20 19:47 ` [PATCH 2/3] ARM: dts: DRA7: Add bandgap and related thermal nodes Nishanth Menon
2015-03-20 21:51 ` Eduardo Valentin [this message]
2015-03-20 19:47 ` [PATCH 3/3] ARM: dts: am57xx-beagle-x15: Add thermal map Nishanth Menon
2015-03-20 21:50 ` Eduardo Valentin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150320215123.GA7346@developer.amazonguestwifi.org \
--to=edubezval@gmail.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=j-keerthy@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=nm@ti.com \
--cc=t-kristo@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).