From mboxrd@z Thu Jan  1 00:00:00 1970
From: Dmitry Torokhov <dtor@google.com>
Subject: Re: [PATCH v1 3/3] phy: cygnus-usbphy: Add Broadcom Cygnus USB phy
 driver
Date: Wed, 25 Mar 2015 15:42:53 -0700
Message-ID: <20150325224253.GA16950@dtor-ws>
References: <1426886727-537-1-git-send-email-arun.ramamurthy@broadcom.com>
 <1426886727-537-4-git-send-email-arun.ramamurthy@broadcom.com>
 <551336A2.1050704@ti.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Return-path: <linux-kernel-owner@vger.kernel.org>
Content-Disposition: inline
In-Reply-To: <551336A2.1050704@ti.com>
Sender: linux-kernel-owner@vger.kernel.org
To: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Arun Ramamurthy <arun.ramamurthy@broadcom.com>, Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>, Mark Rutland <mark.rutland@arm.com>, Ian Campbell <ijc+devicetree@hellion.org.uk>, Kumar Gala <galak@codeaurora.org>, Arnd Bergmann <arnd@arndb.de>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, bcm-kernel-feedback-list@broadcom.com, linux-kernel@vger.kernel.org, Anatol Pomazau <anatol@google.com>, Jonathan Richardson <jonathar@broadcom.com>, Scott Branden <sbranden@broadcom.com>, Ray Jui <rjui@broadcom.com>
List-Id: devicetree@vger.kernel.org

Hi Kishon,

On Thu, Mar 26, 2015 at 03:58:50AM +0530, Kishon Vijay Abraham I wrote:
> Hi,
> 
> On Saturday 21 March 2015 02:55 AM, Arun Ramamurthy wrote:
> > +struct bcm_phy_driver {
> > +	void __iomem *usbphy_regs;
> > +	void __iomem *usb2h_idm_regs;
> > +	void __iomem *usb2d_idm_regs;
> > +	struct bcm_phy_instance *ports[MAX_PHY_PORTS];
> 
> er.. can't we allocate this dynamically?

The chip has support for only 3 phys, so I believe allocating array of 3
pointers is simplest.

[...]

> > +
> > +static struct phy *bcm_usb_phy_xlate(struct device *dev,
> > +				     struct of_phandle_args *args)
> > +{
> > +	struct bcm_phy_driver *phy_driver = dev_get_drvdata(dev);
> > +	struct bcm_phy_instance *port = NULL;
> > +	int i;
> > +
> > +	if (!phy_driver)
> > +		return ERR_PTR(-EINVAL);
> > +
> > +	if (WARN_ON(args->args_count != 1))
> > +		return ERR_PTR(-EINVAL);
> > +
> > +	if (WARN_ON(args->args[0] < 0 || args->args[0] > 1))
> > +		return ERR_PTR(-EINVAL);
> > +
> > +	for (i = 0; i < ARRAY_SIZE(phy_driver->ports); i++) {
> > +		struct bcm_phy_instance *p = phy_driver->ports[i];
> > +
> > +		if (p && p->generic_phy->dev.of_node == args->np) {
> > +			port = p;
> > +			break;
> > +		}
> > +	}
> > +
> > +	if (!port) {
> > +		dev_err(dev, "Failed to locate phy %s\n", args->np->name);
> > +		return ERR_PTR(-EINVAL);
> > +	}
> > +
> > +	port->host_mode = args->args[0];
> > +
> > +	return port->generic_phy;
> > +}
> 
> The xlate function here shouldn't be needed at all. Use of_phy_simple_xlate
> instead.

of_phy_simple_xlate() will not allow specifying host vs device mode when
requesting phy though...

Thanks.

-- 
Dmitry