From: Juergen Borleis <jbe@pengutronix.de>
To: linux-arm-kernel@lists.infradead.org
Cc: Mark Rutland <mark.rutland@arm.com>,
devicetree@vger.kernel.org, Russell King <linux@arm.linux.org.uk>,
Pawel Moll <pawel.moll@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
linux-kernel@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
Sascha Hauer <kernel@pengutronix.de>,
Kumar Gala <galak@codeaurora.org>,
Shawn Guo <shawn.guo@linaro.org>
Subject: [PATCH] DTS/TX25: add missing indention
Date: Mon, 30 Mar 2015 15:21:15 +0200 [thread overview]
Message-ID: <201503301521.15583.jbe@pengutronix.de> (raw)
Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
---
arch/arm/boot/dts/imx25-karo-tx25.dts | 84 +++++++++++++++++----------------
1 file changed, 43 insertions(+), 41 deletions(-)
diff --git a/arch/arm/boot/dts/imx25-karo-tx25.dts b/arch/arm/boot/dts/imx25-karo-tx25.dts
index 9b31faa96377..801c29e9c37c 100644
--- a/arch/arm/boot/dts/imx25-karo-tx25.dts
+++ b/arch/arm/boot/dts/imx25-karo-tx25.dts
@@ -42,49 +42,51 @@
};
&iomuxc {
- pinctrl_uart1: uart1grp {
- fsl,pins = <
- MX25_PAD_UART1_TXD__UART1_TXD 0x80000000
- MX25_PAD_UART1_RXD__UART1_RXD 0x80000000
- MX25_PAD_UART1_CTS__UART1_CTS 0x80000000
- MX25_PAD_UART1_RTS__UART1_RTS 0x80000000
- >;
- };
+ imx25-karo-stk5 {
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX25_PAD_UART1_TXD__UART1_TXD 0x80000000
+ MX25_PAD_UART1_RXD__UART1_RXD 0x80000000
+ MX25_PAD_UART1_CTS__UART1_CTS 0x80000000
+ MX25_PAD_UART1_RTS__UART1_RTS 0x80000000
+ >;
+ };
- pinctrl_fec: fecgrp {
- fsl,pins = <
- MX25_PAD_D11__GPIO_4_9 0x80000000 /* FEC PHY power on pin */
- MX25_PAD_D13__GPIO_4_7 0x80000000 /* FEC reset */
- MX25_PAD_FEC_MDC__FEC_MDC 0x80000000
- MX25_PAD_FEC_MDIO__FEC_MDIO 0x80000000
- MX25_PAD_FEC_TDATA0__FEC_TDATA0 0x80000000
- MX25_PAD_FEC_TDATA1__FEC_TDATA1 0x80000000
- MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
- MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x80000000
- MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x80000000
- MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x80000000
- MX25_PAD_FEC_TX_CLK__FEC_TX_CLK 0x80000000
- >;
- };
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX25_PAD_D11__GPIO_4_9 0x80000000 /* FEC PHY power on pin */
+ MX25_PAD_D13__GPIO_4_7 0x80000000 /* FEC reset */
+ MX25_PAD_FEC_MDC__FEC_MDC 0x80000000
+ MX25_PAD_FEC_MDIO__FEC_MDIO 0x80000000
+ MX25_PAD_FEC_TDATA0__FEC_TDATA0 0x80000000
+ MX25_PAD_FEC_TDATA1__FEC_TDATA1 0x80000000
+ MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
+ MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x80000000
+ MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x80000000
+ MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x80000000
+ MX25_PAD_FEC_TX_CLK__FEC_TX_CLK 0x80000000
+ >;
+ };
- pinctrl_nfc: nfcgrp {
- fsl,pins = <
- MX25_PAD_NF_CE0__NF_CE0 0x80000000
- MX25_PAD_NFWE_B__NFWE_B 0x80000000
- MX25_PAD_NFRE_B__NFRE_B 0x80000000
- MX25_PAD_NFALE__NFALE 0x80000000
- MX25_PAD_NFCLE__NFCLE 0x80000000
- MX25_PAD_NFWP_B__NFWP_B 0x80000000
- MX25_PAD_NFRB__NFRB 0x80000000
- MX25_PAD_D7__D7 0x80000000
- MX25_PAD_D6__D6 0x80000000
- MX25_PAD_D5__D5 0x80000000
- MX25_PAD_D4__D4 0x80000000
- MX25_PAD_D3__D3 0x80000000
- MX25_PAD_D2__D2 0x80000000
- MX25_PAD_D1__D1 0x80000000
- MX25_PAD_D0__D0 0x80000000
- >;
+ pinctrl_nfc: nfcgrp {
+ fsl,pins = <
+ MX25_PAD_NF_CE0__NF_CE0 0x80000000
+ MX25_PAD_NFWE_B__NFWE_B 0x80000000
+ MX25_PAD_NFRE_B__NFRE_B 0x80000000
+ MX25_PAD_NFALE__NFALE 0x80000000
+ MX25_PAD_NFCLE__NFCLE 0x80000000
+ MX25_PAD_NFWP_B__NFWP_B 0x80000000
+ MX25_PAD_NFRB__NFRB 0x80000000
+ MX25_PAD_D7__D7 0x80000000
+ MX25_PAD_D6__D6 0x80000000
+ MX25_PAD_D5__D5 0x80000000
+ MX25_PAD_D4__D4 0x80000000
+ MX25_PAD_D3__D3 0x80000000
+ MX25_PAD_D2__D2 0x80000000
+ MX25_PAD_D1__D1 0x80000000
+ MX25_PAD_D0__D0 0x80000000
+ >;
+ };
};
};
--
1.7.10.4
--
Pengutronix e.K. | Juergen Borleis |
Industrial Linux Solutions | http://www.pengutronix.de/ |
next reply other threads:[~2015-03-30 13:21 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-30 13:21 Juergen Borleis [this message]
2015-03-30 13:26 ` [PATCH] DTS/TX25: add missing indention Juergen Borleis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201503301521.15583.jbe@pengutronix.de \
--to=jbe@pengutronix.de \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=shawn.guo@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox